How do i print out all the files of the current directory that start with the letter "k" ?Also needs to count this files.
I tried some methods but i only got errors or wrong outputs. Really stuck on this as a newbie in bash.
Try this Shellcheck-clean pure POSIX shell code:
count=0
for file in k*; do
if [ -f "$file" ]; then
printf '%s\n' "$file"
count=$((count+1))
fi
done
printf 'count=%d\n' "$count"
It works correctly (just prints count=0) when run in a directory that contains nothing starting with 'k'.
It doesn't count directories or other non-files (e.g. fifos).
It counts symlinks to files, but not broken symlinks or symlinks to non-files.
It works with 'bash' and 'dash', and should work with any POSIX-compliant shell.
Here is a pure Bash solution.
files=(k*)
printf "%s\n" "${files[#]}"
echo "${#files[#]} files total"
The shell expands the wildcard k* into the array, thus populating it with a list of matching files. We then print out the array's elements, and their count.
The use of an array avoids the various problems with metacharacters in file names (see e.g. https://mywiki.wooledge.org/BashFAQ/020), though the syntax is slightly hard on the eyes.
As remarked by pjh, this will include any matching directories in the count, and fail in odd ways if there are no matches (unless you set nullglob to true). If avoiding directories is important, you basically have to get the directories into a separate array and exclude those.
To repeat what Dominique also said, avoid parsing ls output.
Demo of this and various other candidate solutions:
https://ideone.com/XxwTxB
To start with: never parse the output of the ls command, but use find instead.
As find basically goes through all subdirectories, you might need to limit that, using the -maxdepth switch, use value 1.
In order to count a number of results, you just count the number of lines in your output (in case your output is shown as one piece of output per line, which is the case of the find command). Counting a number of lines is done using the wc -l command.
So, this comes down to the following command:
find ./ -maxdepth 1 -type f -name "k*" | wc -l
Have fun!
This should work as well:
VAR="k"
COUNT=$(ls -p ${VAR}* | grep -v ":" | wc -w)
echo -e "Total number of files: ${COUNT}\n" 1>&2
echo -e "Files,that begin with ${VAR} are:\n$(ls -p ${VAR}* | grep -v ":" )" 1>&2
I have a number of files with the following naming:
name1.name2.s01.ep01.RANDOMWORD.mp4
name1.name2.s01.ep02.RANDOMWORD.mp4
name1.name2.s01.ep03.RANDOMWORD.mp4
I need to remove everything between the last . and ep# from the file names and only have name1.name2.s01.ep01.mp4 (sometimes the extension can be different)
name1.name2.s01.ep01.mp4
name1.name2.s01.ep02.mp4
name1.name2.s01.ep03.mp4
This is a simpler version of #Jesse's [answer]
for file in /path/to/base_folder/* #Globbing to get the files
do
epno=${file#*.ep}
mv "$file" "${file%.ep*}."ep${epno%%.*}".${file##*.}"
#For the renaming part,see the note below
done
Note : Didn't get a grab of shell parameter expansion yet ? Check [ this ].
Using Linux string manipulation (refer: http://www.tldp.org/LDP/abs/html/string-manipulation.html) you could achieve like so:
You need to do per file-extension type.
for file in <directory>/*
do
name=${file}
firstchar="${name:0:1}"
extension=${name##${firstchar}*.}
lastchar=$(echo ${name} | tail -c 2)
strip1=${name%.*$lastchar}
lastchar=$(echo ${strip1} | tail -c 2)
strip2=${strip1%.*$lastchar}
mv $name "${strip2}.${extension}"
done
You can use rename (you may need to install it). But it works like sed on filenames.
As an example
$ for i in `seq 3`; do touch "name1.name2.s01.ep0$i.RANDOMWORD.txt"; done
$ ls -l
name1.name2.s01.ep01.RANDOMWORD.txt
name1.name2.s01.ep02.RANDOMWORD.txt
name1.name2.s01.ep03.RANDOMWORD.txt
$ rename 's/(name1.name2.s01.ep\d{2})\..*(.txt)$/$1$2/' name1.name2.s01.ep0*
$ ls -l
name1.name2.s01.ep01.txt
name1.name2.s01.ep02.txt
name1.name2.s01.ep03.txt
Where this expression matches your filenames, and using two capture groups so that the $1$2 in the replacement operation are the parts outside the "RANDOMWORD"
(name1.name2.s01.ep\d{2})\..*(.txt)$
I have some files say about 1000 numbers.. Wanted to rename those files in such a way that, wanted to cut out only few chars from file name and copy it to some other directory.
Ex: Original file name.
vfcon062562~19.xml
vfcon058794~29.xml
vfcon072009~3.xml
vfcon071992~10.xml
vfcon071986~2.xml
vfcon071339~4.xml
vfcon069979~43.xml
Required O/P is cutting the ~and following chars.
O/P Ex:
vfcon058794.xml
vfcon062562.xml
vfcon069979.xml
vfcon071339.xml
vfcon071986.xml
vfcon071992.xml
vfcon072009.xml
But want to place n different directory.
If you are using bash or similar you can use the following simple loop:
for input in vfcon*xml
do
mv $input targetDir/$(echo $input | awk -F~ '{print $1".xml"}')
done
Or in a single line:
for input in vfcon*xml; do mv $input targetDir/$(echo $input | awk -F~ '{print $1".xml"}'); done
This uses awk to separate everything before ~ using it as a field separator and printing the first column and appending ".xml" to create the output file name. All this is prepended with the targetDir which can be a full path.
If you are using csh / tcsh then the syntax of the loop will be slightly different but the commands will be the same.
I like to make sure that my data set is correct prior to changing anything so I would put that into a variable first and then check over it.
files=$(ls vfcon*xml)
echo $files | less
Then, like #Stefan said, use a loop:
for i in $files
do
mv "$i" "$( echo "$file" | sed 's/~[0-9].//g')"
done
If you need help with bash you can use http://www.shellcheck.net/
Let me first describe my situation, I am working on a Linux platform and have a collection of .bmp files that add one to the picture number from filename0022.bmp up to filename0680.bmp. So a total of 658 pictures. I want to be able to run each of these pictures through a .exe file that operates on the picture then kicks out the file to a file specified by the user, it also has some threshold arguments: lower, upper. So the typical call for the executable is:
./filter inputfile outputfile lower upper
Is there a way that I can loop this call over all the files just from the terminal or by creating some kind of bash script? My problem is similar to this: Execute a command over multiple files with a batch file but this time I am working in a Linux command line terminal.
You may be interested in looking into bash scripting.
You can execute commands in a for loop directly from the shell.
A simple loop to generate the numbers you specifically mentioned. For example, from the shell:
user#machine $ for i in {22..680} ; do
> echo "filename${i}.bmp"
> done
This will give you a list from filename22.bmp to filename680.bmp. That simply handles the iteration of the range you had mentioned. This doesn't cover zero padding numbers. To do this you can use printf. The printf syntax is printf format argument. We can use the $i variable from our previous loop as the argument and apply the %Wd format where W is the width. Prefixing the W placeholder will specify the character to use. Example:
user#machine $ for i in {22..680} ; do
> echo "filename$(printf '%04d' $i).bmp"
> done
In the above $() acts as a variable, executing commands to obtain the value opposed to a predefined value.
This should now give you the filenames you had specified. We can take that and apply it to the actual application:
user#machine $ for i in {22..680} ; do
> ./filter "filename$(printf '%04d' $i).bmp" lower upper
> done
This can be rewritten to form one line:
user#machine $ for i in {22..680} ; do ./filter "filename$(printf '%04d' $i).bmp" lower upper ; done
One thing to note from the question, .exe files are generally compiled in COFF format where linux expects an ELF format executable.
here is a simple example:
for i in {1..100}; do echo "Hello Linux Terminal"; done
to append to a file:(>> is used to append, you can also use > to overwrite)
for i in {1..100}; do echo "Hello Linux Terminal" >> file.txt; done
You can try something like this...
#! /bin/bash
for ((a=022; a <= 658 ; a++))
do
printf "./filter filename%04d.bmp outputfile lower upper" $a | "sh"
done
You can leverage xargs for iterating:
ls | xargs -i ./filter {} {}_out lower upper
Note:
{} corresponds to one line output from the pipe, here it's the inputfile name.
Output files wouldbe named with postfix '_out'.
You can test that AS-IS in your shell :
for i in *; do
echo "$i" | tr '[:lower:]' '[:upper:]'
done
If you have a special path, change * by your path + a glob : Ex :
for i in /home/me/*.exe; do ...
See http://mywiki.wooledge.org/glob
This while prepend the name of the output images like filtered_filename0055.bmp
for i in *; do
./filter $i filtered_$i lower upper
done
Trying to debug an issue with a server and my only log file is a 20GB log file (with no timestamps even! Why do people use System.out.println() as logging? In production?!)
Using grep, I've found an area of the file that I'd like to take a look at, line 347340107.
Other than doing something like
head -<$LINENUM + 10> filename | tail -20
... which would require head to read through the first 347 million lines of the log file, is there a quick and easy command that would dump lines 347340100 - 347340200 (for example) to the console?
update I totally forgot that grep can print the context around a match ... this works well. Thanks!
I found two other solutions if you know the line number but nothing else (no grep possible):
Assuming you need lines 20 to 40,
sed -n '20,40p;41q' file_name
or
awk 'FNR>=20 && FNR<=40' file_name
When using sed it is more efficient to quit processing after having printed the last line than continue processing until the end of the file. This is especially important in the case of large files and printing lines at the beginning. In order to do so, the sed command above introduces the instruction 41q in order to stop processing after line 41 because in the example we are interested in lines 20-40 only. You will need to change the 41 to whatever the last line you are interested in is, plus one.
# print line number 52
sed -n '52p' # method 1
sed '52!d' # method 2
sed '52q;d' # method 3, efficient on large files
method 3 efficient on large files
fastest way to display specific lines
with GNU-grep you could just say
grep --context=10 ...
No there isn't, files are not line-addressable.
There is no constant-time way to find the start of line n in a text file. You must stream through the file and count newlines.
Use the simplest/fastest tool you have to do the job. To me, using head makes much more sense than grep, since the latter is way more complicated. I'm not saying "grep is slow", it really isn't, but I would be surprised if it's faster than head for this case. That'd be a bug in head, basically.
What about:
tail -n +347340107 filename | head -n 100
I didn't test it, but I think that would work.
I prefer just going into less and
typing 50% to goto halfway the file,
43210G to go to line 43210
:43210 to do the same
and stuff like that.
Even better: hit v to start editing (in vim, of course!), at that location. Now, note that vim has the same key bindings!
You can use the ex command, a standard Unix editor (part of Vim now), e.g.
display a single line (e.g. 2nd one):
ex +2p -scq file.txt
corresponding sed syntax: sed -n '2p' file.txt
range of lines (e.g. 2-5 lines):
ex +2,5p -scq file.txt
sed syntax: sed -n '2,5p' file.txt
from the given line till the end (e.g. 5th to the end of the file):
ex +5,p -scq file.txt
sed syntax: sed -n '2,$p' file.txt
multiple line ranges (e.g. 2-4 and 6-8 lines):
ex +2,4p +6,8p -scq file.txt
sed syntax: sed -n '2,4p;6,8p' file.txt
Above commands can be tested with the following test file:
seq 1 20 > file.txt
Explanation:
+ or -c followed by the command - execute the (vi/vim) command after file has been read,
-s - silent mode, also uses current terminal as a default output,
q followed by -c is the command to quit editor (add ! to do force quit, e.g. -scq!).
I'd first split the file into few smaller ones like this
$ split --lines=50000 /path/to/large/file /path/to/output/file/prefix
and then grep on the resulting files.
If your line number is 100 to read
head -100 filename | tail -1
Get ack
Ubuntu/Debian install:
$ sudo apt-get install ack-grep
Then run:
$ ack --lines=$START-$END filename
Example:
$ ack --lines=10-20 filename
From $ man ack:
--lines=NUM
Only print line NUM of each file. Multiple lines can be given with multiple --lines options or as a comma separated list (--lines=3,5,7). --lines=4-7 also works.
The lines are always output in ascending order, no matter the order given on the command line.
sed will need to read the data too to count the lines.
The only way a shortcut would be possible would there to be context/order in the file to operate on. For example if there were log lines prepended with a fixed width time/date etc.
you could use the look unix utility to binary search through the files for particular dates/times
Use
x=`cat -n <file> | grep <match> | awk '{print $1}'`
Here you will get the line number where the match occurred.
Now you can use the following command to print 100 lines
awk -v var="$x" 'NR>=var && NR<=var+100{print}' <file>
or you can use "sed" as well
sed -n "${x},${x+100}p" <file>
With sed -e '1,N d; M q' you'll print lines N+1 through M. This is probably a bit better then grep -C as it doesn't try to match lines to a pattern.
Building on Sklivvz' answer, here's a nice function one can put in a .bash_aliases file. It is efficient on huge files when printing stuff from the front of the file.
function middle()
{
startidx=$1
len=$2
endidx=$(($startidx+$len))
filename=$3
awk "FNR>=${startidx} && FNR<=${endidx} { print NR\" \"\$0 }; FNR>${endidx} { print \"END HERE\"; exit }" $filename
}
To display a line from a <textfile> by its <line#>, just do this:
perl -wne 'print if $. == <line#>' <textfile>
If you want a more powerful way to show a range of lines with regular expressions -- I won't say why grep is a bad idea for doing this, it should be fairly obvious -- this simple expression will show you your range in a single pass which is what you want when dealing with ~20GB text files:
perl -wne 'print if m/<regex1>/ .. m/<regex2>/' <filename>
(tip: if your regex has / in it, use something like m!<regex>! instead)
This would print out <filename> starting with the line that matches <regex1> up until (and including) the line that matches <regex2>.
It doesn't take a wizard to see how a few tweaks can make it even more powerful.
Last thing: perl, since it is a mature language, has many hidden enhancements to favor speed and performance. With this in mind, it makes it the obvious choice for such an operation since it was originally developed for handling large log files, text, databases, etc.
print line 5
sed -n '5p' file.txt
sed '5q' file.txt
print everything else than line 5
`sed '5d' file.txt
and my creation using google
#!/bin/bash
#removeline.sh
#remove deleting it comes move line xD
usage() { # Function: Print a help message.
echo "Usage: $0 -l LINENUMBER -i INPUTFILE [ -o OUTPUTFILE ]"
echo "line is removed from INPUTFILE"
echo "line is appended to OUTPUTFILE"
}
exit_abnormal() { # Function: Exit with error.
usage
exit 1
}
while getopts l:i:o:b flag
do
case "${flag}" in
l) line=${OPTARG};;
i) input=${OPTARG};;
o) output=${OPTARG};;
esac
done
if [ -f tmp ]; then
echo "Temp file:tmp exist. delete it yourself :)"
exit
fi
if [ -f "$input" ]; then
re_isanum='^[0-9]+$'
if ! [[ $line =~ $re_isanum ]] ; then
echo "Error: LINENUMBER must be a positive, whole number."
exit 1
elif [ $line -eq "0" ]; then
echo "Error: LINENUMBER must be greater than zero."
exit_abnormal
fi
if [ ! -z $output ]; then
sed -n "${line}p" $input >> $output
fi
if [ ! -z $input ]; then
# remove this sed command and this comes move line to other file
sed "${line}d" $input > tmp && cp tmp $input
fi
fi
if [ -f tmp ]; then
rm tmp
fi
You could try this command:
egrep -n "*" <filename> | egrep "<line number>"
Easy with perl! If you want to get line 1, 3 and 5 from a file, say /etc/passwd:
perl -e 'while(<>){if(++$l~~[1,3,5]){print}}' < /etc/passwd
I am surprised only one other answer (by Ramana Reddy) suggested to add line numbers to the output. The following searches for the required line number and colours the output.
file=FILE
lineno=LINENO
wb="107"; bf="30;1"; rb="101"; yb="103"
cat -n ${file} | { GREP_COLORS="se=${wb};${bf}:cx=${wb};${bf}:ms=${rb};${bf}:sl=${yb};${bf}" grep --color -C 10 "^[[:space:]]\\+${lineno}[[:space:]]"; }