Related
I am a nodejs and mongo newbie. I want to push an item into the array which is nested into the document via findOneandUpdate, but would like to add the new item as the first element (top of the array). Here is my structure :
This works fine for adding item to the end of the array:
const newNote = await NotesBlock.findOneAndUpdate({ blockId: req.params.blockId }, { $push: { notes: { noteTitle: req.body.noteTitle, noteDetail: req.body.noteDetail } } }, { upsert: true, new: true })
As I know we can't use unshift with mongodb, but $each and $position can be used for this purpose. So, I have tried this :
const newNote = await NotesBlock.findOneAndUpdate({ blockId: req.params.blockId }, { $push: { notes: { $each:[noteTitle: req.body.noteTitle, noteDetail: req.body.noteDetail], $position: 0 } } }, { upsert: true, new: true })
But unfortunately, this gives me an error for the syntax.
I can't figure out how to avoid this and make it work. Or is this the wrong approach and there is any other way to achieve?
Thanks for the help
I have figured out the issue. Following was close enough, except the curly brackets that should be inside the square brackets. So I had to change this :
const newNote = await NotesBlock.findOneAndUpdate({ blockId: req.params.blockId }, { $push: { notes: { $each:[noteTitle: req.body.noteTitle, noteDetail: req.body.noteDetail], $position: 0 } } }, { upsert: true, new: true })
To this :
const newNote = await NotesBlock.findOneAndUpdate({ blockId: req.params.blockId }, { $push: { notes: { $each: [{ noteTitle: req.body.noteTitle, noteDetail: req.body.noteDetail }], $position: 0 } } }, { upsert: true, new: true })
And it works as expected now.
Chatrooms.findOneAndUpdate({Roomname: room.Roomname},{ $setOnInsert: {status: true, userNum: 1}}, {new: true, upsert: true}, function(err, doc) {
if(err) console.log(err);
console.log("DOC " + doc)
if(doc.status) {
// FOUND ROOM SATTUS IS TRUE LOGIC
console.log(doc);
// return callback(true)
}
});
Above query will return to me the actual document that's updated or inserted but I can't check exactly which one it is. If I do an update instead of findOneandUpdate I'm returned this
{
ok: 1,
nModified: 0,
n: 1,
upserted: [ { index: 0, _id: 55df883dd5c3f7cda6f84c78 } ]
}
How do I return both the document and the write result or at least the upserted field from the write result.
As of 8 August 2019 (Mongoose Version 5.6.9), the property to set is "rawResult" and not "passRawResult":
M.findOneAndUpdate({}, obj, {new: true, upsert: true, rawResult:true}, function(err, d) {
if(err) console.log(err);
console.log(d);
});
Output:
{ lastErrorObject:
{ n: 1,
updatedExisting: false,
upserted: 5d4befa6b44b48c3f2d21c75 },
value: { _id: 5d4befa6b44b48c3f2d21c75, rating: 4, review: 'QQQ' },
ok: 1 }
Notice also the result is returned as the second parameter and not the third parameter of the callback. The document can be retrieved by d.value.
Version 4.1.10 of Mongoose has an option called passRawResult which if set to true causes the raw parameter to be passed. Leaving out this option seems to default to false and cause raw to always be undefined:
passRawResult: if true, passes the raw result from the MongoDB driver
as the third callback parameter
http://mongoosejs.com/docs/api.html#query_Query-findOneAndUpdate
Alright so my main problem was that I couldn't get the _id of the document I inserted without not being able to check whether if it was updated/found or inserted. However I learned that you can generate your own Id's.
id = mongoose.Types.ObjectId();
Chatrooms.findOneAndUpdate({Roomname: room.Roomname},{ $setOnInsert: {_id: id, status: true, userNum: 1}}, {new: true, upsert: true}, function(err, doc) {
if(err) console.log(err);
if(doc === null) {
// inserted document logic
// _id available for inserted document via id
} else if(doc.status) {
// found document logic
}
});
Update
Mongoose API v4.4.8
passRawResult: if true, passes the raw result from the MongoDB driver as the third callback parameter.
I'm afraid Using FindOneAndUpdate can't do what you whant because it doesn't has middleware and setter and it mention it the docs:
Although values are cast to their appropriate types when using the findAndModify helpers, the following are not applied:
defaults
Setters
validators
middleware
http://mongoosejs.com/docs/api.html search it in the findOneAndUpdate
if you want to get the docs before update and the docs after update you can do it this way :
Model.findOne({ name: 'borne' }, function (err, doc) {
if (doc){
console.log(doc);//this is ur document before update
doc.name = 'jason borne';
doc.save(callback); // you can use your own callback to get the udpated doc
}
})
hope it helps you
I don't know how this got completely off track, but there as always been a "third" argument response to all .XXupdate() methods, which is basically the raw response from the driver. This always tells you whether the document is "upserted" or not:
Chatrooms.findOneAndUpdate(
{ "Roomname": room.Roomname },
{ "$setOnInsert": {
"status": true, "userNum": 1
}},
{ "new": true, "upsert": true },
function(err, doc,raw) {
if(err) console.log(err);
// Check if upserted
if ( raw.lasErrorObject.n == 1 && !raw.lastErrorObject.updatedExisting ) {
console.log("upserted: %s", raw.lastErrorObject.upserted);
}
console.log("DOC " + doc)
if (doc.status) {
// FOUND ROOM SATTUS IS TRUE LOGIC
console.log(doc);
// return callback(true)
}
});
Which will tell you the _id of the document that was just upserted.
From something like this in the "raw" response:
{ lastErrorObject:
{ updatedExisting: false,
n: 1,
upserted: 55e12c65f6044f57c8e09a46 },
value: { _id: 55e12c65f6044f57c8e09a46,
status: true,
userNum: 1
__v: 0 },
ok: 1 }
Complete reproducible listing:
var async = require('async'),
mongoose = require('mongoose'),
Schema = mongoose.Schema;
mongoose.connect('mongodb://localhost/test');
var testSchema = new Schema({
name: String
});
var Test = mongoose.model('Test', testSchema, 'test');
async.series(
[
function(callback) {
Test.remove({},callback);
},
function(callback) {
async.eachSeries(
["first","second"],
function(it,callback) {
console.log(it);
Test.findOneAndUpdate(
{ "name": "Bill" },
{ "$set": { "name": "Bill" } },
{ "new": true, "upsert": true },
function(err,doc,raw) {
console.log(raw),
console.log(doc),
callback(err);
}
);
},
callback
);
}
],
function(err) {
if (err) throw err;
mongoose.disconnect();
}
);
Which outputs:
first
{ lastErrorObject:
{ updatedExisting: false,
n: 1,
upserted: 55e2a92328f7d03a06a2dd6b },
value: { _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 },
ok: 1 }
{ _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 }
second
{ lastErrorObject: { updatedExisting: true, n: 1 },
value: { _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 },
ok: 1 }
{ _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 }
How can I update a field with new properties that is initially set to be an empty object?
For example, I have the following schema:
import mongoose from 'mongoose';
var RunSchema = mongoose.Schema(
{
runId: { type: String },
reports: {
cookieSummary: {
name: String,
path: String
}
}
}
)
export default mongoose.model('Run', RunSchema);
And I'm trying to update the following document:
{
"_id": {
"$oid": "5a0565c2537e0b5d9d08ee6b"
},
"__v": 0,
"reports": {},
"runId": "8r4LNN3fRqd3qNgdW"
}
But when I run this code, it returns undefined:
Run.findOneAndUpdate({runId: '8r4LNN3fRqd3qNgdW'},
{
$set: {'reports.cookieSummary': { 'name': 'test' }},
}, (err, doc) => { console.log(doc) })
The object notation works after adding type to fields, like this: name: { type: String }
Try to use dot notation, as you're setting just one field:
Run.findOneAndUpdate(
{ runId: '8r4LNN3fRqd3qNgdW' },
{ $set: {'reports.cookieSummary.name': 'test' } },
(err, doc) => { console.log(doc) })
According to the docs, the command you're using should work but you write it wrongly. Try like this:
Run.findOneAndUpdate(
{ runId: '8r4LNN3fRqd3qNgdW' },
{ $set: { 'reports.cookieSummary': {'name': 'test'} } },
(err, doc) => { console.log(doc) })
if it does not work, maybe mongo expect that the object matches its schema when you use the command like this. But I don't think so.
Let me know.
Your query for update a document is good only the mistake is at the end of curly braces of $set. You entered un-necessary comma at the end that is actually creating problem in this case. So I suggest you to remove it and run this :
Run.findOneAndUpdate({runId: '8r4LNN3fRqd3qNgdW'},
{
$set: {'reports.cookieSummary': { 'name': 'test' }}
}, (err, doc) => { console.log(doc) });
and then see. Rest of your query is fine.
Hope It will work for you.
Thanks.
Try using below code, it will update the document and return the updated document.
var Q = require('q');
var deferred = Q.defer();
Run.findOneAndUpdate({ runId: '8r4LNN3fRqd3qNgdW' }, { $set: { 'reports.cookieSummary.name': 'test' } }, { new: true },
(err, doc) => {
console.log(doc);
deferred.resolve(doc);
});
return deferred.promise;
I made a small change. Test this solution.
Run.findOneAndUpdate({runId: '8r4LNN3fRqd3qNgdW'},
{
$set: {"reports": {'cookieSummary':{'name': 'test'}}},
}, (err, doc) => { console.log(doc) })
I need to send all urls including last updated values from mongodb.
but i only get previous updated values.Can any body tell the me solution .
new_add_schema.findOneAndUpdate(
{
user_id: req.body.user_id
},
{
$push:
{
filename:
{
url:img_filename
}
}
},
function(err, doc) {
console.log(doc)
});
In mongoose you can pass options as the third argument for this method. If you pass new: true in options then Mongo will return the updated document. It is false by default.
So query like this -
new_add_schema.findOneAndUpdate(
{
user_id: req.body.user_id
},
{
$push:
{
filename:
{
url:img_filename
}
}
},
{new: true}, // notice this options argument
function(err, doc) {
console.log(doc)
});
You can see the documentation here.
Chatrooms.findOneAndUpdate({Roomname: room.Roomname},{ $setOnInsert: {status: true, userNum: 1}}, {new: true, upsert: true}, function(err, doc) {
if(err) console.log(err);
console.log("DOC " + doc)
if(doc.status) {
// FOUND ROOM SATTUS IS TRUE LOGIC
console.log(doc);
// return callback(true)
}
});
Above query will return to me the actual document that's updated or inserted but I can't check exactly which one it is. If I do an update instead of findOneandUpdate I'm returned this
{
ok: 1,
nModified: 0,
n: 1,
upserted: [ { index: 0, _id: 55df883dd5c3f7cda6f84c78 } ]
}
How do I return both the document and the write result or at least the upserted field from the write result.
As of 8 August 2019 (Mongoose Version 5.6.9), the property to set is "rawResult" and not "passRawResult":
M.findOneAndUpdate({}, obj, {new: true, upsert: true, rawResult:true}, function(err, d) {
if(err) console.log(err);
console.log(d);
});
Output:
{ lastErrorObject:
{ n: 1,
updatedExisting: false,
upserted: 5d4befa6b44b48c3f2d21c75 },
value: { _id: 5d4befa6b44b48c3f2d21c75, rating: 4, review: 'QQQ' },
ok: 1 }
Notice also the result is returned as the second parameter and not the third parameter of the callback. The document can be retrieved by d.value.
Version 4.1.10 of Mongoose has an option called passRawResult which if set to true causes the raw parameter to be passed. Leaving out this option seems to default to false and cause raw to always be undefined:
passRawResult: if true, passes the raw result from the MongoDB driver
as the third callback parameter
http://mongoosejs.com/docs/api.html#query_Query-findOneAndUpdate
Alright so my main problem was that I couldn't get the _id of the document I inserted without not being able to check whether if it was updated/found or inserted. However I learned that you can generate your own Id's.
id = mongoose.Types.ObjectId();
Chatrooms.findOneAndUpdate({Roomname: room.Roomname},{ $setOnInsert: {_id: id, status: true, userNum: 1}}, {new: true, upsert: true}, function(err, doc) {
if(err) console.log(err);
if(doc === null) {
// inserted document logic
// _id available for inserted document via id
} else if(doc.status) {
// found document logic
}
});
Update
Mongoose API v4.4.8
passRawResult: if true, passes the raw result from the MongoDB driver as the third callback parameter.
I'm afraid Using FindOneAndUpdate can't do what you whant because it doesn't has middleware and setter and it mention it the docs:
Although values are cast to their appropriate types when using the findAndModify helpers, the following are not applied:
defaults
Setters
validators
middleware
http://mongoosejs.com/docs/api.html search it in the findOneAndUpdate
if you want to get the docs before update and the docs after update you can do it this way :
Model.findOne({ name: 'borne' }, function (err, doc) {
if (doc){
console.log(doc);//this is ur document before update
doc.name = 'jason borne';
doc.save(callback); // you can use your own callback to get the udpated doc
}
})
hope it helps you
I don't know how this got completely off track, but there as always been a "third" argument response to all .XXupdate() methods, which is basically the raw response from the driver. This always tells you whether the document is "upserted" or not:
Chatrooms.findOneAndUpdate(
{ "Roomname": room.Roomname },
{ "$setOnInsert": {
"status": true, "userNum": 1
}},
{ "new": true, "upsert": true },
function(err, doc,raw) {
if(err) console.log(err);
// Check if upserted
if ( raw.lasErrorObject.n == 1 && !raw.lastErrorObject.updatedExisting ) {
console.log("upserted: %s", raw.lastErrorObject.upserted);
}
console.log("DOC " + doc)
if (doc.status) {
// FOUND ROOM SATTUS IS TRUE LOGIC
console.log(doc);
// return callback(true)
}
});
Which will tell you the _id of the document that was just upserted.
From something like this in the "raw" response:
{ lastErrorObject:
{ updatedExisting: false,
n: 1,
upserted: 55e12c65f6044f57c8e09a46 },
value: { _id: 55e12c65f6044f57c8e09a46,
status: true,
userNum: 1
__v: 0 },
ok: 1 }
Complete reproducible listing:
var async = require('async'),
mongoose = require('mongoose'),
Schema = mongoose.Schema;
mongoose.connect('mongodb://localhost/test');
var testSchema = new Schema({
name: String
});
var Test = mongoose.model('Test', testSchema, 'test');
async.series(
[
function(callback) {
Test.remove({},callback);
},
function(callback) {
async.eachSeries(
["first","second"],
function(it,callback) {
console.log(it);
Test.findOneAndUpdate(
{ "name": "Bill" },
{ "$set": { "name": "Bill" } },
{ "new": true, "upsert": true },
function(err,doc,raw) {
console.log(raw),
console.log(doc),
callback(err);
}
);
},
callback
);
}
],
function(err) {
if (err) throw err;
mongoose.disconnect();
}
);
Which outputs:
first
{ lastErrorObject:
{ updatedExisting: false,
n: 1,
upserted: 55e2a92328f7d03a06a2dd6b },
value: { _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 },
ok: 1 }
{ _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 }
second
{ lastErrorObject: { updatedExisting: true, n: 1 },
value: { _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 },
ok: 1 }
{ _id: 55e2a92328f7d03a06a2dd6b, name: 'Bill', __v: 0 }