I have this code which is below. The highlight is always enable. I am trying to find out how can i create something to enable/disable whenever i want.
Thanks in advance.
Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Static xRow
Static xColumn
If xColumn <> "" Then
With Columns(xColumn).Interior
.ColorIndex = xlNone
End With
With Rows(xRow).Interior
.ColorIndex = xlNone
End With
End If
pRow = Selection.Row
pColumn = Selection.Column
xRow = pRow
xColumn = pColumn
With Columns(pColumn).Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
With Rows(pRow).Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
End Sub
Try,
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Cells.Interior.Color = xlNone
If Range("a1") = "" Then Exit Sub 'Set operation according to a1 cell
With Target
.EntireRow.Interior.ColorIndex = 6
.EntireColumn.Interior.ColorIndex = 6
End With
End Sub
It would be nice to insert the activeX control Checkbox in the sheet and set the behavior accordingly.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Cells.Interior.Color = xlNone
'If Range("a1") = "" Then Exit Sub
If CheckBox1 Then Exit Sub
With Target
.EntireRow.Interior.ColorIndex = 6
.EntireColumn.Interior.ColorIndex = 6
End With
End Sub
Related
I am trying to exercise Levenshtein Distance in Excel. To fill the cells, we need to consider the minimum of three cells (left, up-left, and up). It is easy to find minimum of those three if they were highlighted.
I want to highlight those three cells whenever I put my cursor on any empty cell. Just like shown on image below. When I put my cursor on C3; B2, B3, and C2 should be higlighted.
I found a VBA script. But it higlightes the entire row and column of cursor cell. I am not familiar with VBA, therefore can't modify rows and columns to my way.
Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
'Update 20200430
Static xRow
Static xColumn
If xColumn <> "" Then
With Columns(xColumn).Interior
.ColorIndex = xlNone
End With
With Rows(xRow).Interior
.ColorIndex = xlNone
End With
End If
pRow = Selection.Row
pColumn = Selection.Column
xRow = pRow
xColumn = pColumn
With Columns(pColumn).Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
With Rows(pRow).Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
End Sub
this is what it does
A Worksheet SelectionChange: Highlight Cells
Sub Worksheet_SelectionChange(ByVal Target As Range)
With Target.Cells(1)
If .Row = 1 Then Exit Sub
If .Column = 1 Then Exit Sub
If IsEmpty(.Cells) Then
.Worksheet.UsedRange.Interior.ColorIndex = xlNone
Union(.Offset(-1, -1).Resize(2), .Offset(-1)) _
.Interior.Color = vbYellow
End If
End With
End Sub
Hi how can i add both of these codes to 1 worksheet ?
The code auto copies data from 1 sheet to another
Thanks
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 2 And Target.Cells.Count = 1 Then
If LCase(Target.Value) = "y" Then
With Target.EntireRow
.Copy
Sheets("sheet9").Range("A" & Rows.Count).End(xlUp)(2).PasteSpecial xlValues
End With
Application.CutCopyMode = False
End If
End If
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 2 And Target.Cells.Count = 1 Then
If LCase(Target.Value) = "b" Then
With Target.EntireRow
.Copy
Sheets("sheet10").Range("A" & Rows.Count).End(xlUp)(2).PasteSpecial xlValues
End With
Application.CutCopyMode = False
End If
End If
End Sub
Your two subs do essentially the same thing, so you only need one:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ws As string
If Target.Column = 2 And Target.Cells.Count = 1 Then
Select Case LCase(Target.Value)
Case "y": ws = "Sheet9"
Case "b": ws = "Sheet10"
End select
If ws <> "" Then
Thisworkbook.sheets(ws).cells(rows.count,1).end(xlUp).offset(1,0).Entirerow.value = _
Target.EntireRow.Value
End If
End If
End Sub
I have a VBA code for a Rota Sheet that is activated on change of any value in the row.
I want the code to be activated upon opening the excel.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Set rng = Range("B2:V11")
If Not Intersect(Target, rng) Is Nothing Then
'scan each row (month)
Dim countRow As Long
Dim i As Long
For i = 1 To rng.Rows.count
If Not Intersect(Target, rng.Rows(i)) Is Nothing Then
If WorksheetFunction.CountIf(rng.Rows(i), "V") > 0 Then
countRow = 0
Dim cel As Range
For Each cel In rng.Rows(i).Cells
If cel.Value2 = "V" Then
countRow = countRow + 1
VacationChange cel, countRow
Else
VacationChange cel, 0
End If
Next cel
End If
End If
Next i
'scan each column (day)
Dim j As Long
For j = 1 To rng.Columns.count
If Not Intersect(Target, rng.Columns(j)) Is Nothing Then
If WorksheetFunction.CountIf(rng.Columns(j), "V") > 5 Then
VacationChange rng.Columns(j).Cells(0, 1), 6
Else
VacationChange rng.Columns(j).Cells(0, 1), 0
End If
End If
Next j
End If
End Sub
Private Function VacationChange(ByVal rng As Range, ByVal count As Long)
With rng.Interior
Select Case count
Case 0
'clear cell colors
.Pattern = xlNone
.Color = xlNone
.TintAndShade = 0
.PatternTintAndShade = 0
Case 1 To 3
'blue
.Pattern = xlSolid
.Color = 15773696
.TintAndShade = 0
.PatternTintAndShade = 0
Case 4 To 5
'yellow
.Pattern = xlSolid
.ThemeColor = xlThemeColorAccent4
.TintAndShade = 0.399975585192419
.PatternTintAndShade = 0
Case Else
'red
.Pattern = xlSolid
.Color = 255
.TintAndShade = 0
.PatternTintAndShade = 0
End Select
End With
End Function
I spent efforts by trying:
1. Using below code in Workbook: which is throwing 424 error
Private Sub Workbook_Open()
Sheet1.Activate
Call Worksheet_Change(Target)
End Sub
Pasting the entire code under Workbook_Open() function which is not working
Can anyone suggest what i am missing in the code ?
Sample Output image is attached
enter image description here
The problem is that Target is an undeclared Variant in your Workbook_Open implementation. That means when it gets passed as a parameter that needs to be a Range, the implicit cast fails and results in an error 424 (Object required).
If you want to "simulate" every cell in your target range changing, you can simply loop over B2:V11 and pass it each individual cell (untested with your data, but should give the gist):
Private Sub Workbook_Open()
Sheet1.Activate
Dim cell As Range
For Each cell In Sheet1.Range("B2:V11")
'Worksheet_Change needs to be Public
Sheet1.Worksheet_Change cell
Next
End Sub
Note that this is by no means the ideal solution to what you are trying to do and is a sign that you need to refactor your code a little bit to extract the functionality that you currently have in Worksheet_Change into a free-standing procedure. If you need to run the same code from the Worksheet_Change handler, you can call that procedure.
I have the following code to highlight in green the row which the user clicks.
In the end of the code, I select the cell B6 to deselect the whole row and move the selection above.
It is working fine except for the fact that cell B6 is also being highlighted in green and I do not want that. How can I remove that?
In the worksheet I have:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'If not in the table, exit sub
If Intersect(Range("Schema"), ActiveCell.EntireRow) Is Nothing Then Exit Sub
Call ClickInside
End Sub
And in the module:
Sub ClickInside()
Dim cellno As String: cellno = Str(ActiveCell.row)
Dim myRow As Range
Set myRow = ActiveCell.EntireRow 'I want to select the row in the table ONLY
Call Unprotect_table
Call MarkRow(cellno, myRow)
Call Protect_table
End Sub
Sub MarkRow(cellno As String, myRow As Range)
'Marking that row in green
Range("Schema").Interior.ColorIndex = 0
Range("B" & Trim(cellno) & ":I" & Trim(cellno)).Select
With Selection.Interior
.PatternColorIndex = xlAutomatic
.Color = RGB(0, 255, 0)
.TintAndShade = 0
.PatternTintAndShade = 0
End With
Application.ScreenUpdating = False
'Show above
If Not myRow Is Nothing And CLng(cellno) >= 9 Then
Range("EditCountry").Value2 = ThisWorkbook.ActiveSheet.Range("B" & Trim(cellno)).Value2
Range("EditNodeName").Value2 = ThisWorkbook.ActiveSheet.Range("C" & Trim(cellno)).Value2
Range("EditNodeId").Value = ThisWorkbook.ActiveSheet.Range("D" & Trim(cellno)).Value2
Range("EditParentNode").Value = ThisWorkbook.ActiveSheet.Range("E" & Trim(cellno)).Value2
Range("EditParentNodeId").Value = ThisWorkbook.ActiveSheet.Range("F" & Trim(cellno)).Value2
Range("EditActive").Value = ThisWorkbook.ActiveSheet.Range("G" & Trim(cellno)).Value2
Range("EditFrom").Value = ThisWorkbook.ActiveSheet.Range("H" & Trim(cellno)).Value2
Range("EditTo").Value = ThisWorkbook.ActiveSheet.Range("I" & Trim(cellno)).Value2
End If
'Move selection
Range("B6").Select
End Sub
Thanks!
Your statement Range("B6").Select triggers the event-routine a second time. To prevent this, use the statement Application.EnableEvents = False:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(Range("Schema"), ActiveCell.EntireRow) Is Nothing Then Exit Sub
Application.EnableEvents = False
Call ClickInside
Application.EnableEvents = True
End Sub
However, maybe you could have a look to other solution that uses conditional formatting, for example https://stackoverflow.com/a/22350417/7599798
I have this code for my Excel worksheet. It highlights the table rows by the row you have selected but problems arise if you highlight cells in the table to the outside or you put a slicer in the table. Here it the Module I use:
Option Explicit
Public Sub HighlightTableRow(Target As Excel.Range)
Dim t As ListObject
Dim lngInTable As Long
Dim c As Long
Const COLOR_SELECT = xlThemeColorAccent1
Const COLOR_LIGHTER = 0.4
On Error Resume Next
If Target.Interior.Pattern = xlPatternSolid Then Exit Sub
For Each t In Target.Parent.ListObjects
c = c + 1
If Not Intersect(Target, t.DataBodyRange) Is Nothing Then
lngInTable = c
End If
t.Range.Interior.Pattern = xlNone
Next
If lngInTable = 0 Then Exit Sub
With Target.Parent.ListObjects(lngInTable)
With .Range.Interior
.Pattern = xlNone
.TintAndShade = 0
.PatternTintAndShade = 0
End With
With .DataBodyRange
With .Resize(Target.Rows.Count).Offset(Target.Row - .Row).Interior
.ThemeColor = COLOR_SELECT
.TintAndShade = 1 - COLOR_LIGHTER
End With
End With
End With
End Sub
And I put this code in each Excel sheet so the code works:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
On Error Resume Next
HighlightTableRow Target
End Sub
I have no idea how to fix this error. The formatting gets weird. Any ideas?