I am trying to install node setup on AWS with OS ubuntu 20.04 with nginx web server.
Issue is that when we put the project folder in /var/www/html/project_folder and run the npm start in's given error [nodemon] starting babel-node src --source-maps
error: listen EADDRNOTAVAIL: address not available Public_ Ip:3000
instead already put public ip in /etc/ngix/site available/default file,
.env and index.js. PFA
Typically, NGINX expects any servers you are proxying to to be reachable at startup, otherwise fails.
: address not available 70.54.129.105:3000
most likely node isn't reachable - make sure your node app is running, then start nginx.
Also, good idea to not hard-code the node ip:port inside proxy config, but use a variable, makes it easy to reference inside config, e.g my-nginx-app.conf included/imported by nginx.conf :
map $host $my_node_server_x {
default http:\/\/172.0.0.1:3000;
}
server {
...
location {
...
proxy_pass $my_node_server_x
# other proxy settings
}
}
NGINX documentation has Example config for proxying.
Related
Trying to setup a staging environment on Amazon LINUX EC2 instance and migrate from Heroku.
My repository has two folders:
Web
API
Our frontend and backend are running on the same port in deployment
In dev, these are run on separate ports and all requests from WEB and proxied to API
(for ex. WEB runs on PORT 3000 and API runs on PORT 3001. Have a proxy set up in the package.json file in WEB/)
Currently the application deployment works like this:
Build Web/ for distribution
Copy build/ to API folder
Deploy to Heroku with web npm start
In prod, we only deploy API folder with the WEB build/
Current nginx.conf looks like this
Commented out all other attempts
Also using PM2 to run the thread like so
$ sudo pm2 bin/www
Current thread running like so:
pm2 log
This is running on PORT 3000 on the EC2 instance
Going to the public IPv4 DNS for instance brings me to the login, which it's getting from the /build folder but none of the login methods (or any API calls) are working.
502 response example
I have tried a lot of different configurations. Set up the proxy_pass to port 3000 since thats where the Node process is running.
The only response codes I get are 405 Not Allowed and 502 Bad Gateway
Please let me know if there is any other information I can provide to find the solution.
It looks like you don't have an upstream block in your configuration. Looks like you're trying to use proxy-pass to send to a named server and port instead of a defined upstream. There's is an example on this page that shows how you define the upstream and then send traffic to it. https://nginx.org/en/docs/http/ngx_http_upstream_module.html
server backend1.example.com weight=5;
server backend2.example.com:8080;
server unix:/tmp/backend3;
server backup1.example.com:8080 backup;
server backup2.example.com:8080 backup;
}
server {
location / {
proxy_pass http://backend;
}
}````
Turns out there was an issue with express-sessions being stored in Postgres.
This led me to retest the connection strings and I found out that I kept receiving the following error:
connect ECONNREFUSED 127.0.0.1:5432
I did have a .env file holding the env variables and they were not being read by pm2.
So I added this line to app.js:
const path = require("path");
require('dotenv').config({ path: path.join(__dirname, '.env') });
then restarted the app with pm2 with the following command:
$ pm2 restart /bin/www --update-env
I am trying to use Nginix reverse proxy container for my web application(another docker container) which runs on non standard port ,
unfortunately I cannot edit my web application container as its developed by some vendor , so I have a plain request that I need to setup nginx as frontend with 80/443 and forward all requests to 10.0.0.0:10101(web app container).
I had tried jwilder/nginx proxy and default docker nginx container not able to get the right configurtaion .any lead would be great.
At the moment I haven't shared any conf files , I can share it on demand. here is the environment details
OS - Ubuntu
Azure
Use proxy_pass nginx feature
Assuming you have both containers linked and the web app container's name is webapp use this configuration on nginx container
upstream backend {
server webapp:10101;
}
server {
listen 80;
location / {
proxy_pass http://backend;
}
}
NOTE: please note that I am skipping some configurations as this is just an example
Put the configuration in nginx.conf file and then deploy the container like this
docker run -d -v $(pwd)/nginx.conf:/etc/nginx/nginx.conf -p 80:80 nginx
Then you'll be able to access your webapp on http://locahost
Setup:
All following are running on my Mac OS:
localhost:8089 a nodejs REST api runing in my local, OUTSIDE of the nginx container, stand alone!
locahost:80 nginx docker container
I was able to serve static file inside the nginx docker container, but when I set the config for the nginx as:
http {
server {
location / {
root /usr/share/nginx/html;
}
location /api/ {
proxy_pass http://localhost:8089;
}
}
}
for some reason, any localhost:80/api call that suppose to direct to http://localhost:8089; call is returning 404 not found page
404 Not Found
nginx/1.13.6
Any idea where is the config I made wrong? I feel like maybe I shouldn't use localhost:8089 inside nginx? But then what should I be using?
An example can be found here
https://github.com/adamchenwei/docker-nginx-playground
Containers have their own networking namespace / networking stack. So localhost inside the container is the localhost of the container itself.
If you are running Docker for Mac, there is a special hostname that's available inside the container that allows you to connect to services that are running on the host itself. Refer to this answer for more information; https://stackoverflow.com/a/43541732/1811501
If you are running Docker on Linux, this answer (on the same question) allows you to find the IP-address to connect to; https://stackoverflow.com/a/31328031/1811501
I've recently installed a nodejs app (keystone) app in my home/myusername/myappname directory.
When I visit www.mydomain.com, nothing displays - even after turning on my nodejs app.
Where should these files be?
I am running ubuntu 16.04.
In the past I have worked with a var/www folder, but I am not using apache - do I need to manually create this folder?
Thanks!
For your app to be visible it has to be running (obviously) and accessible on port 80 (if you want it to be available without adding a port number to the URL).
It doesn't matter where it is on the disk as long as it's running.
You don't need Apache or nginx or any other server. Your Node app may listen on port 80. But alternatively it can listen on some other port and your other server (Apache, nginx, etc.) can proxy the requests to that port.
But if your app is listening on, e.g. port 3000 then you should be able to access it as http://www.example.com:3000/.
Also, make sure that your domain is configured correctly. It's A record for IPv4 (or AAAA for IPv6) of the www subdomain should be equal to the publicly accessible IP address of your server.
And make sure that the port you use is not blocked by the firewall.
Update
To see how you can set the port with Keystone, see:
http://keystonejs.com/docs/configuration/#options-server
It can be either changed in the config or you can run your app with:
PORT=80 node yourApp.js
instead of:
node yourApp.js
but keep in mind that to use the port number below 1024 you will usually need the program to run as root (or add a special privilege which is more complicated).
It will also mean that this will be the only application that you can run on this server, even if you have more domain names.
If you don't want to run as root or you want to host more application, it is easiest to install nginx and proxy the requests. Such a configuration is called a "reverse proxy" - it's good to search for info and tutorials using that phrase.
The simplest nginx config would be something like this:
server {
listen 80;
server_name www.example.com;
location / {
proxy_pass http://localhost:3000;
}
}
You can set it in:
/etc/nginx/sites-available/default
or in a different file as e.g.:
/etc/nginx/sites-available/example
and then symlinked as /etc/nginx/sites-enabled/example
You need to restart nginx after changing the config.
You can find more options on configuring reverse proxies here:
https://www.nginx.com/resources/admin-guide/reverse-proxy/
You need to make a proxy between Apache and your Node.js application because Node.js has a built-in server. Supose your Node.js app is served on 9000 port. Then you need to make a proxy to redirect all trafic in 80 port to 9000 port where the Node.js app is running.
1. Enable mod_proxy
You can do this through a2enmond.
sudo a2enmod proxy
sudo a2enmod proxy_http
2. Set the proxy
Edit the /etc/apache2/sites-available/example.com.conf file and add the following lines:
ProxyRequests Off
Order deny, allow from All
ProxyPass / http://0.0.0.0:9000 ProxyPassReverse / http://0.0.0.0:9000
This basically say: "Redirect all traffic from root / to http://0.0.0.0:9000. The host 0.0.0.0:9000 is where your app is running.
Finally restart apache to enable changes.
I need the right configuration of nginx for my problem.
Suppose the nginx + nodejs serverprograms are running on the same debian machine.
Domain name for my website is for simplicity just webserver.com (and www.webserver.com as alias)
Now, when someone surfs on the internet to "webserver.com/" it should pass the request to the nodejs application which should run on a specific port like 3000 for example. But the images and css files should get served by nginx as static files and the filestructure should looke like webserver.com/images or webserver.com/css .. images + css should get served by nginx like a static server
Now it gets tricky:
But when someone surfs on webserver.com/staticsite001 or webserver.com/staticsite002 then it should get served by the nginx server only. no need for nodejs then.
And for the nodejs server, I am just setting up my nodejs application with port 3000 for example to receive the bypass from nginx for webserver.com/
to put it in a more understandable language: when someone surfs to webserver.com/staticsite001 it should NOT pass it to the node application. It should only pass it to the node application if its inside of the first webserver.com/ directory that the outsiders can see. The webserver.com/staticsite001 should only get serverd by nginx.
How, how do I do that ? And what should the http and server block look like for the nginx configuration look like?
I am familiar with nodejs. But I am new to nginx and new to reverse proxying.
thanks
the file structure on the debian hard drive looks like:
/home/wwwexample/staticsite001 (for www.webserver.com/staticsite001/) only handled by nginx
/home/wwwexample/staticsite002 (for www.webserver.com/staticiste002/) only handlex by nginx
/home/wwwexample/images
/home/wwwexample/css
and in
/home/nodeapplication is my node js application
This server block should work:
server {
listen 80;
server_name webserver.com www.webserver.com;
root /home/wwwexample;
location / {
proxy_pass http://localhost:3000;
proxy_set_header Host $host;
}
location /staticsite001 {
}
location /staticsite002 {
}
location /images {
}
location /css {
}
}
First location makes nginx to proxy everything to localhost:3000. Following empty locations instruct nginx to use default behavior, that is to serve static files.
Put this code into file /etc/nginx/sites-available/my-server and create a symlink to it in /etc/nginx/sites-enabled. There is a default config, which you could use as a reference.
After that you could use command sudo /usr/sbin/nginx -t to check configuration. If everything is OK use /etc/init.d/nginx reload to apply new configuration.