Which command do I need to use to start a simple HTTP server using "npm", the specified port to be used is port 8080. Also, I don't have to download the npm package. The only hint I got is that I can download the basic web server packet, also from there I can specify the port 8080?
Once the http server has been configured with the x-server name at port xxxx, you can start it with the command:
x-server -p xxxx
for example if my server's name is simple-http-server at port 8080:
simple-http-server -p 8080
would start it.
for the next exercice:
php -S 127.0.0.1:8080
I am also getting started on HTB.
contact me (in the next 23 hours) at this account or leave a correspondance as comment if you want to work with me to break through on HTB.
Once npm is installed, the command is simply: http-server -p 8080 (without writing 'npm' at the beginning of the line).
Related
So up until yesterday I was able to do npm start no issues.
The versions of things I'm running
OSX Mojave...
npm: '8.19.3',
node: '19.2.0',
Now it is saying that port 3000 is in use. I've done all the tricks to see if 3000 is in use is isn't
changed the port to 3001 3005 4444 and various other and it doesn't work.
Still the same message.
serve -s build works great and runs the app on 3000. no idea what is going on..
error message
✔ Something is already running on port 4001.
Would you like to run the app on another port instead? … no
I've tried
user#computer >> npx kill-port 4001
Could not kill process on port 4001. No process running on port.
user#computer >> mtbcrm_react % lsof -i tcp:4001
I have installed Apache Superset on a remote Linux Server and initialized it on port 8080. When I pull up localhost:8080 on the Linux server, the homepage shows up which suggests that the installation worked as per their instructions here.
When I try to access this page from my laptop (Windows- Browser:Chrome) with http://server-name:8080. It gives me the 'This site can't be reached' page.
I tested using netcat if the connection was open by typing nc -zvw3 server-name 8080 and it gave me Connection to server-name 8080 port [tcp/webcache] succeeded!
I have Jupyter installed on the same server on port 8888 and it works perfectly. Any thoughts would be greatly appreciated.
You may need to try this command by defining the IP address:
superset run -h 0.0.0.0 -p 8080
I'm just starting to build an Ionic 2 app, but I can't get it working on my mobile device.
Python (works)
To demonstrate that the phone can see the host, I tried a Python server:
$ python -m SimpleHTTPServer 8000
Serving HTTP on 0.0.0.0 port 8000 ...
If I go to http://192.168.8.101:8000 on my phone, it connects fine and displays the directory listing.
Node (fails)
However, when I start Ionic:
$ ionic serve -p 8000
[...]
[INFO] Development server running
Local: http://localhost:8000
External: http://192.168.8.101:8000
I can load it in my host's web browser, but I can't see it from my phone nor another computer (it times out). I also tried a basic node server:
$ npm install http-server -g
$ http-server -p 8000
Starting up http-server, serving ./
Available on:
http://127.0.0.1:8000
http://192.168.8.101:8000
With the same result as Ionic: accessible from the host, but not from the phone.
Is there something blocking the request? Or is there some Node configuration I'm missing? I'm new to both Mac OS and Node, so I don't know where to look.
Embarrasingly, this turned out to be a firewall issue. In System Preferences > Security & Privacy > Firewall > Firewall Options, Node was explicitly set to deny incoming connections:
Changing it to Allow has fixed it. Phew!
Just execute ionic address and you'll get an IP address in your command line. Try with that ipaddress:port number from your mobile which will enable you to access your site from your phone.
Just incase if the ionic address command doesn't return anything, you need to execute the below command to point it to your ip,
ionic serve --address YOUR_IP_ADDRESS
Hope this helps!
So I have a web application being run on an http-server via npm. In my package.jsonfile, I have the line "start": "sudo http-server -a [my ip address] -p 8065 -c-1", and my app runs fine when I go to http://myipaddress:8065. However if I change the 8065 to just 80, in the json file (which is what I want), I still get the success message:
Starting up http-server, serving ./
Available on:
http://myipaddress:80
But when I go to the link, chrome givess me an ERR_CONNECTION_REFUSED. Anybody know what's going on?
I would suggest there are three possible problems here.
Port 80 is already in use.
You are not running the application as root (you can't bind to ports <1024 if you are not root)
http-server isn't binding correctly
To check if port 80 is already in use try
netstat -lntu | grep :80
If port 80 is already in use you should see something like
tcp6 0 0 :::80 :::* LISTEN
You will need to close whatever is running on port 80 (apache? nginx?)
To check if you can actually bind to port 80, try running http-server from the console rather than via npm i.e.
sudo http-server -a [my ip address] -p 80 -c-1
If the above works you should be able to run npm as root to start your http-server i.e.
sudo npm start
You may need to remove sudo from your package.json:
"start": "http-server -a [my ip address] -p 8065 -c-1"
We need to make sure that http-server is working correctly on your system. We will test it with w3m a console based web browser.
You may need to install w3m with sudo apt-get install w3m if you do not have it already.
create a new directory. mkdir /tmp/testing
CD into new dir cd /tmp/testing
Start http-server with `http-server . -a localhost -p 1234
Visit http://localhost:1234 with w3m w3m http://localhost:1234/
Start http-server with `http-server . -a localhost -p 80
Visit http://localhost in a w3m w3m http://localhost/ does it work?
Quick tests:
Try to access this on as the localhost address, either localhost or 127.0.0.1 to shortcut any potential firewalls.
Try to telnet to this address on port 80 to see what the server replies (if any).
Do you have Apache installed? Are sure putting your application server on port 80 is not in conflict with Apache?
In that case it is better to redirect port 80 to your application server that just starting it on the Apache port.
Is it error 102? Check this link. Probably it's caused by some extensions you installed.
To run nodejs apps with pot less than 1000 you need a root access. Use sudo node app.js Also dont forget to open firewall. And make sure nobody else listening on port 80.
I'd like to copy my config.yml file from my local django app directory to my heroku server, but I'm not sure how to get the user#host.com format for heroku.
I've tried running 'heroku run bash'
scp /home/user/app/config.yml
I'm not sure how I can get it in the
scp user#myhost.com:/home/user/dir1/file.txt user#myhost.com:/home/user/dir2'
format
As #tamas7 said it's firewalled, but your local machine is probably also firewalled. So unless you have a private server with SSH accessible from the Internet, you won't be able to scp.
I'm personally using transfer.sh free and open source service.
Upload your config.yml to it:
$ curl --upload-file ./config.yml https://transfer.sh/
https://transfer.sh/66nb8/config.yml
Then download it back from wherever you want:
$ wget https://transfer.sh/66nb8/config.yml
According to http://www.evans.io/posts/heroku-survival-guide/ incoming connections are firewalled off. In this case you need to approach your local machine from the Heroku server.
heroku run bash
scp user#mylocalmachine:/home/user/dir/file.txt .
This is a bit late to answer this question, but I use services like localtunnel - https://localtunnel.github.io/www/ to copy files from local machine to heroku.
First, run a python HTTP server in the directory where the file is located.
cd /path/to/file
python3 -m http.server
This starts a server in port 8000. Configure localtunnel to connect to that port.
lt -s mylocal -p 8000
Now from your heroku machine, you can fetch the file via curl.
curl -XGET http://mylocal.localtunnel.me/myfile.txt > myfile.txt
You could also use a service like https://ngrok.com/ to open up a TCP tunnel into your local machine.
You will need to enable Remote Login as in simlmx answer.
On your local machine open the TCP tunnel just like this:
$ ngrok tcp 22
And then, on the Heroku console, just use SCP with the PORT and HOST that Ngrok provided.
$ scp -P [PORT] username#[HOST]:~/path/to/file.ext .
If you need to download your entire repo, for example to recover an app that you no longer have locally, use heroku git:clone -a myapp. Docs.
Expanding on tamas7's answer:
You can connect to your computer from the heroku server.
If your computer is behind a router, you'll also need to forward the connection to your computer.
1. You computer must accept ssh connections
On my mac it was as simple as enabling it in the Preferences / Sharing panel.
2. Your router needs to forward the connection to your computer.
Go to your router's settings page in your browser (typically 192.168.0.1 but varies depending on the router). Find the port forwarding section and forward some port to your computer on port 22.
This is how it looked on my tp-link:
Here I am making sure that port 22000 is forwarded to my computer (192.168.0.110) on port 22.
3. Find your external IP
Simply google "what is my IP".
4. Scp your file from heroku
heroku run bash
scp -P 22000 your_user#your_external_IP:/path/to/your/file .
5. Undo everything!
Once you're done it's probably good practice to disable the port forwarding and remote login.