I intend to use libigl booleanoperations on my meshes, like this:
igl::copyleft::cgal::mesh_boolean(VA, FA, VB, FB, igl::MESH_BOOLEAN_TYPE_MINUS, V, F);
As noted here:
mesh_boolean assumes the inputs are PWN http://www.cs.columbia.edu/cg/mesh-arrangements/#definitions which includes being oriented so that normals computed using right hand rule point outward
So, I have to make sure my meshes are PWN.
PWN: A (triangle) mesh inducing a piecewise constant generalized winding number field. These meshes may contain self-intersections, non-manifold elements, multiple components, degenerate faces, and even open boundaries (seams), so long as the winding number is still piecewise constant.
How can I make my meshes PWN?
Tried
I tried to fix my meshes by MeshFix. But it does much more than just making the meshes PWN. What other tools are available which I might be missing?
Related
Let's say I've got a rgba texture, and a polygon class , which constructor takes vector array of verticies coordinates.
Is there some way to create a polygon of this texture, for example, using alpha channel of the texture ...?
in 2d
Absolutely, yes it can be done. Is it easy? No. I haven't seen any game/geometry engines that would help you out too much either. Doing it yourself, the biggest problem you're going to have is generating a simplified mesh. One quad per pixel is going to generate a lot of geometry very quickly. Holes in the geometry may be an issue if you're tracing the edges and triangulating afterwards. Then there's the issue of determining what's in and what's out. Alpha is the obvious candidate, but unless you're looking at either full-on or full-off, you may be thinking about nice smooth edges. That's going to be hard to get right and would probably involve some kind of marching squares over the interpolated alpha. So while it's not impossible, its a lot of work.
Edit: As pointed out below, Unity does provide a method of generating a polygon from the alpha of a sprite - a PolygonCollider2D. In the script reference for it, it mentions the pathCount variable which describes the number of polygons it contains, which in describes which indexes are valid for the GetPath method. So this method could be used to generate polygons from alpha. It does rely on using Unity however. But with the combination of the sprite alpha for controlling what is drawn, and the collider controlling intersections with other objects, it covers a lot of use cases. This doesn't mean it's appropriate for your application.
I'm building a 2D game where player can only see things that are not blocked by other objects. Consider this example on how it looks now:
I've implemented raytracing algorithm for this and it seems to work just fine (I've reduced the boundaries for demo to make all edges visible).
As you can see, lighter area is built with a bunch of triangles, each of them having common point in the position of player. Each two neighbours have two common points.
However I'm willing to calculate bounds for external the part of the polygon to fill it with black-colored triangles "hiding" what player cannot see.
One way to do it is to "mask" the black rectangle with current polygon, but I'm afraid it's very ineffective.
Any ideas about an effective algorithm to achieve this?
Thanks!
A non-analytical, rough solution.
Cast rays with gradually increasing polar angle
Record when a ray first hits an object (and the point where it hits)
Keep going until it no longer hits the same object (and record where it previously hits)
Using the two recorded points, construct a trapezoid that extends to infinity (or wherever)
Caveats:
Doesn't work too well with concavities - need to include all points in-between as well. May need Delaunay triangulation etc... messy!
May need extra states to account for objects tucked in behind each other.
I am looking for an algorithm that given two meshes could clip one using another.
The simplest form of this is clipping a mesh using a plane. I've already implemented that by following something similar to what is described here.
What it does is basically inspecting all mesh vertices and triangles with respect to the plane (the plane's normal and point are given). If the triangle is completely above the plane, it is left untouched. If it falls completely below the plane, it is discarded. If some of the edges of the triangle intersect with the plane, the intersecting points with the plane are calculated and added as the new vertices. Finally a cap is generated for the hole on the place the mesh was cut.
The problem is that the algorithm assumes that the plane is unlimited, therefore whatever is in its path is clipped. In the simplest form, I need an extension of this without the assumption of a plane of "infinite" size.
To clarify, imagine that we have a 3D model of a desk with 2 boxes on it. The boxes are adjacent (but not touching or stacked). The user will define a cutting plane of a limited width and height underneath the first box and performs the cut. We end up with a desk model (mesh) with a box on it and another box (mesh) that can be freely moved around/manipulated.
In the general form, I'd like the user to be able to define a bounding box for the box he/she wants to separate from the desk model and perform the cut using that bounding box.
If I could extend the algorithm I already have to an algorithm with limited-sized planes, that would be great for now.
What you're looking for are constructive solid geometry/boolean algorithms with arbitrary meshes. It's considerably more complex than slicing meshes by an infinite plane.
Among the earliest and simplest research in this area, and a good starting point, is Constructive Solid Geometry for Polyhedral Objects by Trumbore and Hughes.
http://cs.brown.edu/~jfh/papers/Laidlaw-CSG-1986/main.htm
From the original paper:
More elaborate solutions extend upon this subject with a variety of data structures.
The real complexity of the operation lies in the slicing algorithm to slice one triangle against another. The nightmare of implementing robust CSG lies in numerical precision. It's easy when you involve objects far more complex than a cube to run into cases where a slice is made just barely next to a vertex (at which point you have the tough decision of merging the new split vertex or not prior to carrying out more splits), where polygons are coplanar (or almost), etc.
So I suggest initially erring on the side of using very high-precision floating point numbers, possibly even higher than double precision to focus on getting something working correctly and robustly. You can optimize later (first pass should be to use an accelerator like an octree/kd-tree/bvh), but you'll avoid many headaches this way in your first iteration.
This is vastly simpler to implement at render time if you're focusing on a raytracer rather than a modeling software, e.g. With raytracers, all you have to do to do this kind of arbitrary clipping is pretend that an object used to subtract from another has its polygons flipped in the culling process, e.g. It's easy to solve robustly at the ray level, but quite a bit harder to do robustly at the geometric level.
Another thing you can do to make your life so much easier if you can afford it is to voxelize your object, find subtractions/additions/unions of voxels, and then translate the voxels back into a mesh. This is so much easier to make robust, but harder to do efficiently and the voxel->polygon conversion can get quite involved if you want better results than what marching cubes provide.
It's a really tough area to do extremely well and requires perseverance, and thus the reason for the existence of things like this: http://carve-csg.com/about.
If someone is interested, currently there is a solution for this problem in CGAL library. It allows clipping one triangular mesh using another mesh as bounding volume. The usage example can be found here.
I have got point clouds of different primitive objects (cone, plane, torus, cylinder, sphere, ellipsoid). The all vary in orientation, position and scaling. Furthermore all of them are initialized with a unique set of parameters (e.g. height, radius, etc.) so that their shape can be quiet different (some cones are tall, others are small and fat).
Now to my question:
I am trying to find the objects "principal components". Using PCA doesn't lead to good results, since rotated primitives can have their main variation in any direction (which doesn't have to be necessarily along the length of the objects).
The only chance that I see is to use somehow the symmetry of my primitives. Isn't there a method based on inertia? Maybe some way to find the main symmetry axis and two others perpendicular to it?
Can you give me some advice or point me to papers or implementations (maybe even python)?
Thanks a lot, Merlin.
PS: This is what I get if I only apply a PCA. Especially for cones this doesn't really work. Only cones that are almost identical in shape share the same orientation, but I need them all to point in one direction (e.g. up).
So you got cones and just need to rotate them all in the same direction?
If so you can fit a triangle to them and point the peak (e.g with the perpendicular bisectors of the sides) to your main axis.
You have an interesting problem. Normally used shape descriptors (VFH) that are invariant to shape but not pose (which is what you would want, really) would not be invariant to stretching in the shape.
I think to succeed at this you need to be clearer about the invariants that you are trying to maintain when a shape changes. Is it a topological invariant? If so, then here is a good starting point: https://www.google.com.tr/search?q=topologically+invariant+shape+descriptor
I decided to just stick to simple PCA since it's the only method that is totally generic and doesn't depend on prior (expert) knowledge about the data.
I'd like to write a program that lets me arbitrarily distort a textured polygon by dragging its vertices. I want the texture to distort fluidly and without overlap, assuming the new polygon doesn't intersect itself. I should also be able to repeat the process with the new shape, and with a minimum amount of loss.
Are there any algorithms for doing this?
It sounds like you might want a variation on the Schwarz-Christoffel mapping. This is a type of conformal mapping that can be used to warp a polygon to and from a simpler region, like a disk; although I have not implemented it, apparently it is computationally tractable.
For your application, you would set up a map from the original polygon to the simpler region, and compute the inverse map to the modified polygon; combining the two should give you a nice conformal mapping from the original to the modified polygon.
Conformal mappings are nice and smooth, but they can sometimes behave in unintuitive ways; I can imagine that an animated version might yield some entertaining "slidy" effects. The conformal mapping will preserve local angles in the interior of the polygon; this means that the size distortion very near a modified vertex can be severe.
People have been working on solutions to this problem for the past decade or two, and the state of the art keeps on getting better and better (but the math gets harder as well). A good place to start (and sort of where I stopped following it) is the work http://www.cs.technion.ac.il/~weber/Publications/Complex-Coordinates/
Read the paper there, and look up the papers in the references. One of them should give you an algorithm that you're willing to implement.
The simplest method I can think of is to triangulate the input polygon (using an ear clipping method, or something similarly good) and then move the points. Then you can use a barycentric mapping from the original polygon to the new space.
If you're looking for something more robust, you might look at mean value coordinates.