Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
Improve this question
The following command gives the expected result (file is created):
sshpass -p pas ssh root#host 'touch foo'
But the following one does nothing on the remote host:
sudo sshpass -p pas ssh root#host 'touch foo'
The only difference here is just sudo mode.
What is the reason here? And how this can be solved?
The problem is more visible when running ssh -v.
With sudo communication interrupts after detecting the server host key.
To solve the problem ssh needs to run with the following argument -o "StrictHostKeyChecking no".
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 6 years ago.
Improve this question
I am trying to schedule node server restart on OS reboot (Ubuntu 16.04 LTS). I wrote:
crontab -u username -e
then I added following line:
#reboot /usr/local/bin/forever start -c /usr/bin/node /home/username/node/bin/www
I get the success message after saving or updating this file. There seems to be no effect on server reboot.
I'd wrap that into a bash script in the user's home directory's bin.
/home/username/bin/start_my_node_app.sh
Then in your crontab...
#reboot /home/username/bin/start_my_node_app.sh >/dev/null 2>&1
Though according to this article, #reboot may not work for non-root users.
https://unix.stackexchange.com/questions/109804/crontabs-reboot-only-works-for-root
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
I'm planning on making a Bash script that sets up an SSH server. The script is only meant to work on a computer running OS X. With the research I have conducted it seems like you have to use the GUI to enable SSH. Is their a way to enable SSH through Terminal and then create a script that does so?
You can enable it from the command line (or a shell script) with:
sudo launchctl load -w /System/Library/LaunchDaemons/ssh.plist
You might also want to regulate access to the ssh service with the com.apple.access_ssh group:
sudo dseditgroup -o edit -a usernametoallow -t user com.apple.access_ssh
sudo dseditgroup -o edit -a otherusernametoallow -t user com.apple.access_ssh
sudo dseditgroup -o edit -a groupnametoallow -t group com.apple.access_ssh
...after which only usernametoallow, otherusernametoallow, and members of groupnametoallow will be able to ssh into the Mac.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
How do you check if a port is open when you cannot use telnet or install Cacti? I want to see if a port is open between two Linux servers. Telnet isn't installed. I tried this command:
cat < /dev/tcp/x.x.x.x/6061
where x.x.x.x was the remote IP address of the Linux server and port 6061 is the port that I want to test. But based on tests of known working and not working ports, this command wasn't conclusive to me. There may be an environmental explanation for that.
Install nmap and than:
nmap x.x.x.x
Better use (if installed) : netcat :
nc -zw3 <host> <port>
If you want to use the bash feature net redirection :
cat < /dev/tcp/x.x.x.x/6061
do it the right way :
{ exec 3<> /dev/tcp/127.0.0.1/6061; } &>/dev/null &&
echo "Connection to socket OK" ||
echo >&2 "Can't connect"
If it doesn't work, you need to compile bash with --enable-net-redirections
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
Closed 9 years ago.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Improve this question
when running
gcutil ssh myproject_name
ssh run with the following command
ssh -o UserKnownHostsFile=/dev/null -o CheckHostIP=no -o StrictHostKeyChecking=no -i /Users/MyUser/.ssh/google_compute_engine -A -p 22 MyUser#xxx.xxx.xxx.xxx
i've changed my ssh port to 1234 in sshd_config file and opened a firewall rule at my compute engine console. executing the following command works perfect and connection is established
ssh -o UserKnownHostsFile=/dev/null -o CheckHostIP=no -o StrictHostKeyChecking=no -i /Users/MyUser/.ssh/google_compute_engine -A -p 1234 MyUser#xxx.xxx.xxx.xxx
but when running this command gcutil ssh myproject_name port 22 is being called.
How & where can i change the default port of ssh so I wont have to use the long command in order to connect to my instance
gcutil supports alternate ports via the --ssh_port flag. In your case, this should work:
gcutil ssh --ssh_port 1234 INSTANCE_NAME
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 9 years ago.
Improve this question
I am having multiple ssh commands to do some tasks for me. For eg:
ssh a-vm "rm -f /home/dir/file1.xlsx"
ssh a-vm "rm -f /home/dir/file2.xml"
scp me#b-vm:/somedir/file1.xlsx .
scp me#b-vm:/somedir/file2.xml .
1) Is there a way to combine 2 ssh commands into 1 and two scp commands into 1?
2) Is there a cost if I do ssh and scp multiple times instead of 1 time?
Any help is appreciated.
You can just do:
ssh a-vm "rm -f /home/dir/file1.xlsx ; rm -f /home/dir/file2.xml"
scp "me#b-vm:/somedir/{file1.xlsx,file2.xml}" .
Each ssh/scp call will cost you the connection time and some cpu time (could be significant if you do that to hundreds of machines at the same time, otherwise unlikely).
Alternatively you can use a persistent master connection for ssh and tunnel others over it. That will save a couple of network roundtrips - see http://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing