Is there a way of seeing which route a outbound request from my app is taking on a windows azure app service.
I want to prove if my requests are routing through the attached vnet or not, it doesn't appear from the console any of the following work:
curl https://ifconfig.me/ip
Invoke-WebRequest -UseBasicParsing https://ifconfig.me/ip
Thank you for your question.
Have you set WEBSITE_VNET_ROUTE_ALL to 1, which ensures all outbound traffic is routed to your VNET? If so, you should be able to look at the clients to see what IP address is being used for the request. Outbound traffic that is being routed via your VNET will be received using your VNET address space.
Outbound traffic that is not using your VNET will be sent via one of the outbound IP addresses, which you can see in the properties blade of your web app in the Azure portal.
More information here.
Due to the sandboxed nature of web apps, most CMD cmdlets do not work.
Related
I have 2 app service plans in the same Azure region running 1 app each - web frontend on one, API on the other.
I want to use access restrictions on the API to only allow access from the front end app.
I set access restriction rules using all the outgoing IP addresses associated with the frontend app (I note that these are exactly the same as the outgoing IP addresses on the API app as well) however when the frontend app tries to contact the API I get an error:
403 forbidden 'The web app you have attempted to reach has blocked your access.'
The 2 apps can communicate as normal when the access restrictions are removed.
I turned on diagnostic settings and ran a query on IP blocking by the app.
Turns out that the FE app is using an IPv6 address instead of the v4 addresses listed in the app properties.
This is because the app has a vnet integration set up connecting to a Subnet delegated to Webservice/serverfarm.
Azure does not make it obvious that using delegated subnets forces an integrated app to use IPv6 and there does not appear to be a way to discover what v6 addresses may be in use. MS forum response suggests any firewall rule for a web app attached to a delegated subnet should allow ALL IPv6 addresses (!!) as a way of working around the problem.
https://learn.microsoft.com/en-us/answers/questions/493483/why-is-my-azure-web-app-showing-an-ipv6-outbound-i.html
You can control the IP address of outbound traffic from your FE web app by using regional VNet integration together with a virtual network NAT gateway to direct traffic through a static public IP address. Regional VNet integration is available on Standard, Premium, PremiumV2 and PremiumV3 App Service plans. To learn more about this setup, see NAT gateway integration.
Once you FE web app has a static IP you can use that on the API web app restriction in an ALLOW rule.
If your requirement fits, you may also leverage Service Endpoints.
With service endpoints,to ensure inbound traffic to your API app comes only from the subnet used by your front-end web app.
With this route, you need to use VNet Integration with your front end app and service endpoints with your API app. Set service endpoints on the integration subnet used by your Front End application. This solution is fast to set up and easy as well.
-This feature works together with IP access restrictions. Service endpoints aren't compatible with remote debugging. There are some considerations you need to make, you may take a look at them here and also other combination of networking features available on App Service and related scenarios.
As a side note:
-IP-based access restriction rules only handle virtual network address ranges when your app is in an App Service Environment. If your app is in the multitenant service, you need to use service endpoints to restrict traffic to select subnets in your virtual network.
-On App Service, you could have those two separate apps in the same App Service Plan (ASP), since you pay only for ASP, saving costs.
So, you can continue to add apps to an existing plan as long as the plan has enough resources to handle the load. The apps in the same App Service plan all share the same compute resource.
I'm trying to secure my containerized web app with a Premium V2 App Service Plan. I've enabled Service Endpoints for an integration subnet for the different App Services to restrict incoming traffic from each other except for the frontend (so all of them are integrated with the VNet and all have incoming traffic restricted to that VNet except for the frontend).
I have also other Azure services like Azure Functions or a Storage Account that can have inbound traffic restricted by using those Service Endpoints. However, One of the App Services calls an external 3rd party API that lies on Azure too. That API may or not be behind a static IP. However, it has a Custom Domain associated.
The problem arises when I try to connect to that API from one of the VNet integrated App Services. As the destination IP is inside one of the IP ranges that are added to the routing with the use of a Service Endpoint, traffic is sent via that Service Endpoint instead of simple Azure routing. I've tried overriding the route with a Route Table associated to that subnet but that seems not to be possible, with or without a NAT Gateway attached to the subnet. I guess Azure routing is prioritized here. I'm sure the route is not effective as I used it on a different subnet where I deployed a VM.
Is there any way I can use that Service Endpoint for my internal traffic only so it's not used when it goes to an Azure hosted API or I need to switch to a different approach like Private Endpoints or an ASE?
I am unsure what you're looking for but if you want to explicitly define routes you should try using app services setting "WEBSITE_VNET_ROUTE_ALL" = 1 which overrides the default precedence of routing and makes sure that every outbound call follows the route defined inside route table of subnet.
Use the following steps to add the WEBSITE_VNET_ROUTE_ALL setting in your app:
Go to the Configuration UI in your app portal. Select New application setting.
Enter WEBSITE_VNET_ROUTE_ALL in the Name box, and enter 1 in the Value box.
When WEBSITE_VNET_ROUTE_ALL is set to 1, outbound traffic is still sent from the addresses that are listed in your app properties, unless you provide routes that direct the traffic elsewhere.
We've been able to ask the 3rd party to disable blocking rules. It turns out they had a rule that blocked this specific traffic.
I already tried changing that setting, but didn't try putting a route table on it. However, it'd make no difference as I can't define a list of allowed outbound IPs belonging to Azure since we have no static IP to call.
I have azure app service which runs .net core web api. This api access several external API s to get data and those external services has to whitelist the outbound ip addresses of my app service.
Azure app service has several outbound ip addresses and it can be change when upgrade/downgrade app service or when make internal changes like changing app service plan or resource group.
Is there any solution in azure to setup this app service behind a forward proxy ?, so i can share the IP of the forward proxy to external parties.
I think the best way would be to add all App services under a virtual network and create a Virtual Network Gateway to all outbound connections.
This would potentially need below azure services to be created:
- Virtual network
- Subnet
- Virtual Network gateway
- Routing tables (to route traffic via Gateway)
A better way would be sharing a domain name rather than IP address. Here's how to configure it directly in the Azure Portal:
https://learn.microsoft.com/en-us/azure/app-service/app-service-web-tutorial-custom-domain
You can also add an API Management in front of your web app and use it as API gateway and also apply policies on it.
https://learn.microsoft.com/en-us/azure/api-management/configure-custom-domain
I am trying to solve a problem. I have to access APIs that are hosted on my on premises server (on-prem) from Azure hosted Web API.
The problem is that my on-prem server only allows white listed IPs. I know we can get outbound IPs from our Web App (Azure hosted). But I am not sure whether they are static or will change based on scaling.
Another Solution is to create VNET and add that Web app into that VNET. But I would like someone to suggest better solutions.
There are couple of choices you have.
First, you can have a look at the possibleOutboundIpAddress of your App Service and whitelist this IPs. This however also opens up the door for IPs not really in use by your App Service.
az webapp show --resource-group <group_name> --name <app_name> --query possibleOutboundIpAddresses --output tsv
Secondly, you can put a NAT Gateway in-front of your App Service. This however requires an App Service Plan that supports virtual network integration.
Configure regional virtual network integration from within your app service.
Force all outbound traffic originating from that app to travel through the virtual network. This is done by setting WEBSITE_VNET_ROUTE_ALL=1 property in your web app configuration
Create a public IP address.
Add a NAT gateway, attach it to the subnet that contains the app service and make use of the public IP created in step 3.
If you would also like to use a static inbound IP you can find more information here
The outbound IPs for Azure App service are generally static and will not change on scaling. There are normally 4 outbound IPs and they only change if you change the SKU or there is a need at MS end to increase the capacity of their data center (rare or may never happen in near future).
I would recommend creating a VNET as that is more secure than whitelisting IPs at your on prem service. But if you want to want list the outbound IPs, I would recommend creating a wrapper for your on prem APIs in Azure and whitelist IPs for these in your on prem firewall. This will ensure that you don't have to whitelist every time you want to create an API in Azure that needs to access on prem APIs.
Unfortunately there is no straight forward way to do this in Azure for App Services, I also had this issue recently.
The only solution (for now anyway) is to add the list of outbound IPs of the App Service to your allow rules.
Just be careful with scaling between the tiers because it will change the outbound IP addresses. (https://learn.microsoft.com/en-us/azure/app-service/overview-inbound-outbound-ips#when-outbound-ips-change)
The simplest way would be to use an Azure VM with a static public IP which is used for both inbound and outbound.
Sam Cogan has a good blog post where he does go through a couple of options.
(https://samcogan.com/obtaining-a-static-outbound-ip-from-an-azure-virtual-network/)
A hybrid connection might be a solution https://learn.microsoft.com/en-us/azure/app-service/app-service-hybrid-connections? I think they are designed for accessing on premise services.
Is there a way that we can route outbound traffic going out from an ILB ASE to an static internal IP?
I understand that App Service Plans get assigned an IP dynamically from the subnet the ASE belongs to, but we have a need to make sure traffic comes to our on-premise data center from a static IP.
As for as I know, apps running in an App Service environment get static, dedicated IP addresses both for inbound and outbound connections. See here. As you said, we can't beforehand which IP address will be assigned app instance to make the outbound connection if there are scaled-out instances. Even now I could not find any official doc to define this. It's welcome to give feedback here.
Besides, if you want to route your ASE outbound traffic somewhere instead of directly routing to the internet, you can configure your App Service Environment with forced tunneling from this doc.