Related
There are 24 sheets in this workbook. I need to copy the same range from 23 sheets and paste them in a final sheet called "ALL SURVEY". Is there any way to code it in such a way that I don't need to write so much code as I did in the following macro?
Sheets("2").Range("U3:X3").Copy
Sheets("ALL SURVEY").Range("E2").*PasteSpecial xlPasteValues*
Sheets("3").Range("U3:X3").Copy
Sheets("ALL SURVEY").Range("E3").*PasteSpecial xlPasteValues*
Sheets("4").Range("U3:X3").Copy
Sheets("ALL SURVEY").Range("E4").*PasteSpecial xlPasteValues*
Sheets("5").Range("U3:X3").Copy
Sheets("ALL SURVEY").Range("E5").*PasteSpecial xlPasteValues*
It will be much appreciated if you help me get through this hard task
Thank you
You can use a For...Next loop for this:
Sub Tester()
Dim n As Long, c As Range
Set c = ThisWorkbook.Sheets("ALL SURVEY").Range("E2") 'first destination cell
'loop through sheets
For n = 2 To 23
'convert n to string to get the correct sheet
' Sheets("2") vs Sheets(2) - by sheet Name vs. Index
With ThisWorkbook.Sheets(CStr(n)).Range("U3:X3")
c.Resize(.Rows.Count, .Columns.Count).Value = .Value 'set values
Set c = c.Offset(1, 0) 'next destination
End With
Next n
End Sub
You can do something like this:
Sub copyPaste()
Dim survey_sheet As Worksheet, count As Long
count = 1 'start pasting from this row
For Each survey_sheet In ThisWorkbook.Sheets
If survey_sheet.Name <> "ALL SURVEY" Then
survey_sheet.Range("U3:X3").Copy
Sheets("ALL SURVEY").Range("E" & count).PasteSpecial xlPasteValues
count = count + 1
End If
Next survey_sheet
End Sub
As you can see in the macro above, there is a loop For all the sheets in the Workbook. It will end when it has gone through every single one.
The If statement is to avoid copy/pasting in the final sheet ant the count variable is for pasting in the next empty row on "ALL SURVEY" sheet.
Copy Ranges by Rows
Adjust the values in the constants section. Pay attention to the Exceptions List. I added those two 'funny' names just to show that you have to separate them by the Delimiter with no spaces. The list can contain non-existing worksheet names, but it won't help, so remove them and add others if necessary.
You can resize the 'copy' range as you desire (e.g. U3:X5, Z7:AS13). The result will be each next range below the other (by rows).
Basically, the code will loop through all worksheets whose names are not in the Exceptions List and will write the values of the given range to 2D one-based arrays in an Array List. Then it will loop through the arrays of the Array List and copy the values to the resulting Data Array whose values will then be copied to the Destination Range.
The Code
Option Explicit
Sub copyByRows()
Const dstName As String = "ALL SURVEY"
Const dstFirst As String = "E2"
Const srcRange As String = "U3:X3"
Const Delimiter As String = ","
Dim ExceptionsList As String
ExceptionsList = dstName & Delimiter & "Sheet500,Sheet1000"
Dim wb As Workbook: Set wb = ThisWorkbook
Dim dst As Worksheet: Set dst = wb.Worksheets(dstName)
Dim srCount As Long: srCount = dst.Range(srcRange).Rows.Count
Dim cCount As Long: cCount = dst.Range(srcRange).Columns.Count
Dim arl As Object: Set arl = CreateObject("System.Collections.ArrayList")
Dim Exceptions() As String: Exceptions = Split(ExceptionsList, Delimiter)
Dim ws As Worksheet
For Each ws In wb.Worksheets
If IsError(Application.Match(ws.Name, Exceptions, 0)) Then
arl.Add ws.Range(srcRange).Value
End If
Next ws
Dim Data As Variant: ReDim Data(1 To arl.Count * srCount, 1 To cCount)
Dim Item As Variant
Dim i As Long
Dim j As Long
Dim k As Long
For Each Item In arl
For i = 1 To srCount
k = k + 1
For j = 1 To cCount
Data(k, j) = Item(i, j)
Next j
Next i
Next Item
dst.Range(dstFirst).Resize(k, cCount).Value = Data
End Sub
I have two set of range named as LIST_KEY and LIST_CAT. In Column A, user will add some data which will contain one of the one of the text from LIST_KEY. I would like to get corresponding Category list from LIST_CAT depends upon the Key value
I am using below VBA code to achieve this. This include a Array formula.
Sub match()
Dim ss As Workbook
Dim test As Worksheet
Set ss = Excel.Workbooks("test.xlsm")
Set test = ss.Worksheets("Sheet1")
For i = 2 To test.Cells(Rows.Count, "A").End(xlUp).Row
Cells(i, "B").FormulaArray = "=INDEX(LIST_CAT,MATCH(TRUE,ISNUMBER(SEARCH(LIST_KEY,RC[-1])),0))"
Cells(i, "B").Formula = Cells(i, "B").Value
Next i
End Sub
This code works perfect if there is less data to fetch. But in my original use case, I will have around 8000 rows. Due to this large number of columns excel will go to not responding state after 2-3 minutes.
Instead of adding Array formula to column B, Is there anyway to convert that into VBA to run this faster. Sorry, I am new to this VBA stuff and dont have much experience
Try the following code, which uses arrays instead of worksheet formulas...
Option Explicit
Sub GetCategories()
Dim sourceWorkbook As Workbook
Set sourceWorkbook = Workbooks("test.xlsm")
Dim sourceWorksheet As Worksheet
Set sourceWorksheet = sourceWorkbook.Worksheets("Sheet1")
Dim lookupArray As Variant
lookupArray = sourceWorkbook.Names("LIST_KEY").RefersToRange.Value
Dim returnArray As Variant
returnArray = sourceWorkbook.Names("LIST_CAT").RefersToRange.Value
Dim tableArray As Variant
Dim lastRow As Long
With sourceWorksheet
lastRow = .Cells(.Rows.Count, "a").End(xlUp).Row
tableArray = .Range("A2:B" & lastRow).Value
End With
Dim desc As String
Dim i As Long
Dim j As Long
For i = LBound(tableArray, 1) To UBound(tableArray, 1)
desc = tableArray(i, 1)
For j = LBound(lookupArray, 1) To UBound(lookupArray, 1)
If InStr(1, desc, lookupArray(j, 1), vbTextCompare) > 0 Then
tableArray(i, 2) = returnArray(j, 1)
Exit For
End If
Next j
Next i
sourceWorksheet.Range("B2").Resize(UBound(tableArray, 1), 1).Value = Application.Index(tableArray, 0, 2)
End Sub
I've got three sheets - main,specimen and output in an excel workbook. The sheet main and speciment contain some information. Some of the information in two sheets are identical but few of them are not. My intention is to paste those information in output which are available in speciment but not in main.
I've tried like [currently it fills in lots of cells producing duplicates]:
Sub getData()
Dim cel As Range, celOne As Range, celTwo As Range
Dim ws As Worksheet: Set ws = ThisWorkbook.Worksheets("main")
Dim ws1 As Worksheet: Set ws1 = ThisWorkbook.Worksheets("specimen")
Dim ws2 As Worksheet: Set ws2 = ThisWorkbook.Worksheets("output")
For Each cel In ws.Range("A2:A" & ws.Cells(Rows.Count, 1).End(xlUp).row)
For Each celOne In ws1.Range("A2:A" & ws1.Cells(Rows.Count, 1).End(xlUp).row)
If cel(1, 1) <> celOne(1, 1) Then ws2.Range("A" & Rows.Count).End(xlUp).Offset(1, 0).value = celOne(1, 1)
Next celOne
Next cel
End Sub
main contains:
UNIQUE ID FIRST NAME LAST NAME
A0000477 RICHARD NOEL AARONS
A0001032 DON WILLIAM ABBOTT
A0290191 REINHARDT WESTER CARLSON
A0290284 RICHARD WARREN CARLSON
A0002029 RAYMOND MAX ABEL
A0002864 DARRYL SCOTT ABLING
A0003916 GEORGES YOUSSEF ACCAOUI
specimen contains:
UNIQUE ID FIRST NAME LAST NAME
A0288761 ROBERT HOWARD CARLISLE
A0290284 RICHARD WARREN CARLSON
A0290688 THOMAS A CARLSTROM
A0002029 RAYMOND MAX ABEL
A0002864 DARRYL SCOTT ABLING
output should contain [EXPECTED]:
UNIQUE ID FIRST NAME LAST NAME
A0288761 ROBERT HOWARD CARLISLE
A0290688 THOMAS A CARLSTROM
How can I achieve that?
If you have the latest version of Excel, with the FILTER function and dynamic arrays, you can do this with an Excel formula.
I changed your Main and Specimen data into tables.
On the Output worksheet you can then enter this formula into a single cell:
=FILTER(specTbl,ISNA(MATCH(specTbl[UNIQUE ID],mnTbl[UNIQUE ID],0)))
The remaining fields will autopopulate with the results.
For a VBA solution, I like to use Dictionaries, and VBA arrays for speed.
'set reference to microsoft scripting runtime
' or use late-binding
Option Explicit
Sub findMissing()
Dim wsMain As Worksheet, wsSpec As Worksheet, wsOut As Worksheet
Dim dN As Dictionary, dM As Dictionary
Dim vMain As Variant, vSpec As Variant, vOut As Variant
Dim I As Long, v As Variant
With ThisWorkbook
Set wsMain = .Worksheets("Main")
Set wsSpec = .Worksheets("Specimen")
Set wsOut = .Worksheets("Output")
End With
'Read data into vba arrays for processing speed
With wsMain
vMain = .Range(.Cells(1, 1), .Cells(.Rows.Count, 1).End(xlUp)).Resize(columnsize:=3)
End With
With wsSpec
vSpec = .Range(.Cells(1, 1), .Cells(.Rows.Count, 1).End(xlUp)).Resize(columnsize:=3)
End With
'add ID to names dictionary
Set dN = New Dictionary
For I = 2 To UBound(vMain, 1)
dN.Add Key:=vMain(I, 1), Item:=I
Next I
'add missing ID's to missing dictionary
Set dM = New Dictionary
For I = 2 To UBound(vSpec, 1)
If Not dN.Exists(vSpec(I, 1)) Then
dM.Add Key:=vSpec(I, 1), Item:=WorksheetFunction.Index(vSpec, I, 0)
End If
Next I
'write results to output array
ReDim vOut(0 To dM.Count, 1 To 3)
vOut(0, 1) = "UNIQUE ID"
vOut(0, 2) = "FIRST NAME"
vOut(0, 3) = "LAST NAME"
I = 0
For Each v In dM.Keys
I = I + 1
vOut(I, 1) = dM(v)(1)
vOut(I, 2) = dM(v)(2)
vOut(I, 3) = dM(v)(3)
Next v
Dim R As Range
With wsOut
Set R = .Cells(1, 1)
Set R = R.Resize(UBound(vOut, 1) + 1, UBound(vOut, 2))
With R
.EntireColumn.Clear
.Value = vOut
.Style = "Output"
.EntireColumn.AutoFit
End With
End With
End Sub
Both show the same result (except the formula solution does not bring over the column headers; but you can do that with a formula =mnTbl[#Headers] in the cell above the original formula above).
Another option is to join the values of each row in each range and store them in arrays.
Then compare arrays and output the unique values.
In this case, your uniques come from evaluating the whole row, and not just the Unique ID.
Please read code's comments and adjust it to fit your needs.
Public Sub OutputUniqueValues()
Dim mainSheet As Worksheet
Dim specimenSheet As Worksheet
Dim outputSheet As Worksheet
Dim mainRange As Range
Dim specimenRange As Range
Dim mainArray As Variant
Dim specimenArray As Variant
Dim mainFirstRow As Long
Dim specimenFirstRow As Long
Dim outputCounter As Long
Set mainSheet = ThisWorkbook.Worksheets("main")
Set specimenSheet = ThisWorkbook.Worksheets("specimen")
Set outputSheet = ThisWorkbook.Worksheets("output")
' Row at which the output range will be printed (not including headers)
outputCounter = 2
' Process main data ------------------------------------
' Row at which the range to be evaluated begins
mainFirstRow = 2
' Turn range rows into array items
mainArray = ProcessRangeData(mainSheet, mainFirstRow)
' Process specimen data ------------------------------------
' Row at which the range to be evaluated begins
specimenFirstRow = 2
' Turn range rows into array items
specimenArray = ProcessRangeData(specimenSheet, specimenFirstRow)
' Look for unique values and output results in sheet
OutputUniquesFromArrays outputSheet, outputCounter, mainArray, specimenArray
End Sub
Private Function ProcessRangeData(ByVal dataSheet As Worksheet, ByVal firstRow As Long) As Variant
Dim dataRange As Range
Dim evalRowRange As Range
Dim lastRow As Long
Dim counter As Long
Dim dataArray As Variant
' Get last row in sheet (column 1 = column A)
lastRow = dataSheet.Cells(dataSheet.Rows.Count, 1).End(xlUp).Row
' Set the range of specimen sheet
Set dataRange = dataSheet.Range("A" & firstRow & ":C" & lastRow)
' Redimension the array to the number of rows in range
ReDim dataArray(dataRange.Rows.Count)
counter = 0
' Join each row values so it's easier to compare them later and add them to an array
For Each evalRowRange In dataRange.Rows
' Use Trim function if you want to omit the first and last characters if they are spaces
dataArray(counter) = Trim(evalRowRange.Cells(1).Value) & "|" & Trim(evalRowRange.Cells(2).Value) & "|" & Trim(evalRowRange.Cells(3).Value)
counter = counter + 1
Next evalRowRange
ProcessRangeData = dataArray
End Function
Private Sub OutputUniquesFromArrays(ByVal outputSheet As Worksheet, ByVal outputCounter As Long, ByVal mainArray As Variant, ByVal specimenArray As Variant)
Dim specimenFound As Boolean
Dim specimenCounter As Long
Dim mainCounter As Long
' Look for unique values ------------------------------------
For specimenCounter = 0 To UBound(specimenArray)
specimenFound = False
' Check if value in specimen array exists in main array
For mainCounter = 0 To UBound(mainArray)
If specimenArray(specimenCounter) = mainArray(mainCounter) Then specimenFound = True
Next mainCounter
If specimenFound = False Then
' Write values to output sheet
outputSheet.Range("A" & outputCounter).Value = Split(specimenArray(specimenCounter), "|")(0)
outputSheet.Range("B" & outputCounter).Value = Split(specimenArray(specimenCounter), "|")(1)
outputSheet.Range("C" & outputCounter).Value = Split(specimenArray(specimenCounter), "|")(2)
outputCounter = outputCounter + 1
End If
Next specimenCounter
End Sub
What I am trying to do is looping through all rows and columns to find the quantity of a part inside a machine. This is searched for based on the article number and the Equipment/machine type. As in this screenshot:
My problem is that the way I have it running now is VERY slow. In the screenshot above is only a small portion of the cells. They go down to +-500 equalling roughly 22500 times the formula:
=ifERROR(INDEX(Datasheet!$B$1:$E$100;MATCH(1;(Datasheet!$D:$D=C$1)*(Datasheet!$B:$B=$AY15);0);4);"")
I want to speed it up using VBA by just giving my static values in all cells.
I have a large part done which I will display below.
The search values (datasheet)
I have it almost complete (I can feel it!) but it keeps returning me the type 13 Type mismatch error. I have found MANY MANY threads on stack overflow and the internet but these fixes do not fix it for myself.
My code:
'set all sheets
'----------------------------------------
Dim Isht As Worksheet
Dim Esht As Worksheet
Dim Dsht As Worksheet
Dim Gsht As Worksheet
Set Isht = ThisWorkbook.Worksheets("Instructionsheet")
Set Esht = ThisWorkbook.Worksheets("Exportsheet")
Set Dsht = ThisWorkbook.Worksheets("Datasheet")
Set Gsht = ThisWorkbook.Worksheets("Gathersheet")
'----------------------------------------
Dim EshtLR As Long
Dim EshtLC As Long
Dim DshtLC As Long
Dim DshtLR As Long
Dim OutputRange As Range
Dim SearchRange As Range
Dim MachineMatchCOL As Range
Dim ArticleMatchCOL As Range
Dim MachineType As String
Dim ArticleNumber As String
Dim StartRow As Long
Dim StartCol As Long
StartCol = Dsht.Range("P10").Value
StartRow = Dsht.Range("P11").Value
'Determine Last column in export sheet.
EshtLC = Esht.Cells(14, Columns.count).End(xlToLeft).Column
'Determine Last row in data sheet.
DshtLR = Dsht.Cells(Rows.count, 1).End(xlUp).Row
'Determine Last row in export sheet.
EshtLR = Esht.Cells(Rows.count, 1).End(xlUp).Row
Set OutputRange = Esht.Range(Esht.Cells(StartRow, 3), Esht.Cells(EshtLR, EshtLC - 9))
Set SearchRange = Dsht.Range(Dsht.Cells(1, 2), Dsht.Cells(DshtLR, 5))
Set MachineMatchCOL = Dsht.Range(Dsht.Cells(1, 4), Dsht.Cells(DshtLR, 4))
Set ArticleMatchCOL = Dsht.Range(Dsht.Cells(1, 2), Dsht.Cells(DshtLR, 2))
'=IFERROR(INDEX(Datasheet!$B$1:$E$100;Match(1;(Datasheet!$D:$D=C$1)*(Datasheet!$B:$B=$AY15);0);4);"")
'Datasheet!$B$1:$E$100 = SearchRange
'Datasheet!$D:$D = MachineMatchCOL
'Datasheet!$B:$B = ArticleMatchCOL
'C$1 = MatchineType
'$AY15 = ArticleNumber
j = StartRow
i = StartCol
For Each Row In OutputRange
For Each Column In OutputRange
MachineType = Esht.Range(Esht.Cells(1, i), Esht.Cells(1, i)).Value
ArticleNumber = Esht.Range(Cells(j, EshtLC - 5), Cells(j, EshtLC - 5)).Value
Esht.Cells(j, i).Value = Application.WorksheetFunction _
.IfError(Application.WorksheetFunction _
.Index(SearchRange, Application.WorksheetFunction _
.Match(1, (MachineMatchCOL = MachineType) * (ArticleMatchCOL = ArticleNumber), 0), 4), "")
i = i + 1
Next Column
j = j + 1
Next Row
It has something to do with the fact that a range cannot equal a value but I have tried for a long time and cannot figure it out.
Also note that the loop probably does not work but that is for a next problem to deal with :-).
I do not expect you to fully create everything but, again, a friendly push is also greatly appreciated.
UPDATE: The line that arises error is:
Esht.Cells(j, i).Value = Application.WorksheetFunction _
.IfError(Application.WorksheetFunction _
.Index(SearchRange, Application.WorksheetFunction _
.Match(1, (MachineMatchCOL = MachineType) * (ArticleMatchCOL = ArticleNumber), 0), 4), "")
Build a dictionary of the Datasheet values using columns B & D joined as the key and column E as the item. This will provide virtually instantaneous 'two-column' lookup for the C15:AU29 table on the Exportsheet worksheet.
Option Explicit
Sub PopulateQIMs()
Dim i As Long, j As Long, ds As Object
Dim arr As Variant, typ As Variant, art As Variant, k As Variant
Set ds = CreateObject("scripting.dictionary")
'populate a dictionary
With Worksheets("datasheet")
'collect values from ws into array
arr = .Range(.Cells(3, "B"), .Cells(.Rows.Count, "E").End(xlUp)).Value2
'cycle through array and build dictionary
For i = LBound(arr, 1) To UBound(arr, 1)
'shorthand overwrite method of creating dictionary entries
'key as join(column B & column D), item as column E
ds.Item(Join(Array(arr(i, 1), arr(i, 3)), Chr(0))) = arr(i, 4)
Next i
End With
With Worksheets("exportsheet")
'collect exportsheet 'Type' into array
'typ = .Range(.Cells(1, "C"), .Cells(1, "AU")).Value2
typ = .Range(.Cells(1, "C"), .Cells(1, "C").End(xlToRight)).Value2
'collect exportsheet 'Article Number' into array
'art = .Range(.Cells(15, "AY"), .Cells(29, "AY")).Value2
art = .Range(.Cells(15, "AY"), .Cells(15, "AY").End(xlDown)).Value2
'create array to hold C15:AU29 values
'ReDim arr(1 To 15, 1 To 45)
ReDim arr(LBound(art, 1) To UBound(art, 1), _
LBound(typ, 2) To UBound(typ, 2))
'cycle through Type and Article Numbers and populate array from dictionary
For i = LBound(arr, 1) To UBound(arr, 1)
For j = LBound(arr, 2) To UBound(arr, 2)
'build a key for lookup
k = Join(Array(art(i, 1), typ(1, j)), Chr(0))
'is it found ...?
If ds.exists(k) Then
'put 'Quantity In Machine' into array
arr(i, j) = ds.Item(k)
End If
Next j
Next i
'put array values into Exportsheet
.Cells(15, "C").Resize(UBound(arr, 1), UBound(arr, 2)) = arr
End With
End Sub
Not sure this exactly meets your needs, nor being the most elegant solution - and running out of time to make this more nicer...
It might not work for you straight out of the box, but i hope it gives you an idea on how to better aproach this.
Sub test()
'set all sheets
'----------------------------------------
Dim Isht As Worksheet
Dim Esht As Worksheet
Dim Dsht As Worksheet
Dim Gsht As Worksheet
Set Isht = ThisWorkbook.Worksheets("Instructionsheet")
Set Esht = ThisWorkbook.Worksheets("Exportsheet")
Set Dsht = ThisWorkbook.Worksheets("Datasheet")
Set Gsht = ThisWorkbook.Worksheets("Gathersheet")
'----------------------------------------
Dim EshtLR As Long
Dim EshtLC As Long
Dim DshtLC As Long
Dim DshtLR As Long
Dim OutputRange As Range
Dim SearchRange As Range
Dim MachineMatchCOL As Range
Dim ArticleMatchCOL As Range
Dim MachineType As String
Dim ArticleNumber As String
Dim StartRow As Long
Dim StartCol As Long
StartCol = Dsht.Range("P10").Value
StartRow = Dsht.Range("P11").Value
'Determine Last column in export sheet.
EshtLC = Esht.Cells(14, Columns.Count).End(xlToLeft).Column
'Determine Last row in data sheet.
DshtLR = Dsht.Cells(Rows.Count, 1).End(xlUp).row
'Determine Last row in export sheet.
EshtLR = Esht.Cells(Rows.Count, 1).End(xlUp).row
'Declare and allocate your ranges to arrays
Dim arrOutput As Variant, arrSearch As Variant
arrOutput = Esht.Range(Esht.Cells(1, 3), Esht.Cells(EshtLR, EshtLC)) 'Not sure what last column is here, but i will make a presumption below that "Article number" is last
arrSearch = Dsht.Range(Dsht.Cells(1, 2), Dsht.Cells(DshtLR, 5))
Dim R As Long, C As Long, X As Long
For R = LBound(arrOutput) To UBound(arrOutput)
For C = LBound(arrOutput, 2) To UBound(arrOutput, 2)
For X = LBound(arrSearch) To UBound(arrSearch)
'If the article number has a match in the search
If arrOutput(R, UBound(arrOutput)) = arrSearch(X, 1) Then 'replace UBound(arrOutput) with the "Article number" column number
'Let's check if the machine number is there as well
If arrOutput(1, C) = arrSearch(X, 3) Then
'both found at the same row, return the value from that row
arrOutput(R, C) = arrSearch(X, 4)
End If
End If
Next X
Next C
Next R
End Sub
PS: You still need to write the values back to the sheet from the array, which you can either do directly range = array or through a loop, depending on your needs.
I`ll try to complete the answer later when i get more time (at work!).
I'm very new to VBA and should probably spend some time on debugging and learning the formalities of how code should be written.
I am using a loop that uses the Hlookup function to populate a table from on one sheet from data on a master sheet. (This is in the Sub SetMatrix). Within the Sub that performs this task I use some other UDF's, one which copies and pastes the variables (names from a 3rd sheet which may change) I want to lookup from the master sheet.
In any case it runs perfectly fine when the I use a hardcoded number for the row in the lookup function. However, once I try to use a variable (jpmRow instead of a number like 50) for the row it will work the first time only. Then when I run it again I get RunTime error 91 - object variable or withblock variable not set. The debugger take me back to the DynamicRange UDF, Set StartCell line, which confuses me because that is not where I am setting the row variable. Meanwhile if I use a constant for the row it lets me rerun the sub with success every time.
Here is the code:
Option Explicit
Dim wsTemplate As Worksheet
Dim ws As Worksheet
Dim TxtCell As Range
Dim PortfolioCell As String
Dim StartCell As Range
Dim EndCell As Range
Dim RangeParameter As Range
Dim jpmRow As Integer
Dim myColumn As Integer
Dim myRow As Integer
Function DynamicRange(TxtToFind As String) As Range
Dim k As Integer
k = iCount
Set ws = Sheets("Template")
Set StartCell = ws.Cells.Find(TxtToFind).Offset(2, 0)
myColumn = StartCell.Column
myRow = StartCell.Row
Set EndCell = ws.Cells(myRow + k - 1, myColumn)
Set DynamicRange = ws.Range(StartCell.Address, EndCell.Address)
'Set DynamicRange = RangeParameter
End Function
Function iCount() As Integer
Set ws = Sheets("Template")
Set StartCell = ws.Cells.Find("Ticker").Offset(2, 0)
Set EndCell = ws.Cells.Find("Total").Offset(-1, 0)
iCount = ws.Range(StartCell.Address, EndCell.Address).Rows.Count
End Function
Sub SetMatrix()
Dim StartTable As Range
Dim iRows As Range
Dim iColumns As Range
Dim myArray(50, 50) As Integer
Dim wsJPM As Worksheet
Dim i As Integer
Dim j As Integer
Set StartTable = Sheets("Correlation Matrix").Range("A3")
Set iRows = Range(StartTable.Offset(1, 0).Address, StartTable.Offset(iCount, 0).Address)
Set iColumns = Range(StartTable.Offset(0, 1).Address, StartTable.Offset(0, iCount).Address)
Set wsJPM = Sheets("JPM")
Sheets("Correlation Matrix").Cells.ClearContents
Sheets("Correlation Matrix").Cells.ClearFormats
DynamicRange("Asset Class").Copy iRows
DynamicRange("Asset Class").Copy
iColumns.PasteSpecial Transpose:=True
For i = 1 To iCount
For j = 1 To iCount
jpmRow = wsJPM.Cells.Find(StartTable.Offset(i, 0), SearchOrder:=xlColumns, LookAt:=xlWhole).Row
StartTable.Offset(i, j).Value = Application.WorksheetFunction.HLookup(StartTable.Offset(0, j), Sheets("JPM").Range("B1:BZ100"), jpmRow, False)
Next j
Next i
End Sub