I'm a really big fan of VSCode, But I wanna migrate to vim...
vim has a alternative way, like vscode?
I know multi cursor plugin, But I don't know multi copy and multi paste with orderly.
There's plug-in mg979/vim-visual-multi, that implements something akin to multiple cursors in Vim.
Without plug-ins, Vim has a feature of Visual Block selection, but that is column based, so when you use it to perform this operation (in the same sequence you used), you end up with this instead:
<div>Multi-copy</div>
<div>Paste </div>
<div>Orderly </div>
(You can later use something else, like a :s, to remove the spaces before the </div>.)
Another option would be to use a Vim macro, to yank the contents of a single line, position the cursor inside one of the <div> blocks and put it there, then position the cursor at the next line, so that the next macro execution will act on the second line, then keep repeating the macro until done.
In Vim, it's actually more natural to do the opposite of what you've done, instead of putting the contents inside the <div>s, putting the <div>s around the contents is much easier. You can use Visual Block insert and append, even Visual Block put will work for the left tag (they have all the same length), there are also common plug-ins (such as vim-surround) to surround a selection in a specific HTML tag, and plug-ins (such as emmet.vim) to quickly generate a structure with a set of HTML tags.
Actually you have at least two options on neovim for doing that:
1 - Using (nvim) inccommand like:
:%s/<div>\zs/whetever you want/g
the \zs ensures your changes will start after this position
2 - Using visual block selection
Start visual block selection -> Ctrl-v
use j or k to expand your selection
now press I and type what you want, after that
just press Esc.
Related
This is not a programming question but an inconvenience in the android-studio editor.
If you have an unwanted tab before all your lines, how can you remove them all at once? Now I have to manually go over 50 lines to remove all the tabs to make my code look clean.
If you want to add multiple tabs at once you just select all your code and press the tab button. So I'm looking for the reverse of that.
If I understood you right, you want to beautify the code itself. Fortunately, you don't have to do that manually - at all.
There's a keybinding for it, which may vary by your OS and which layout you use by default. Go to file -> settings -> Keymap and search for auto-indent. Here's what I get on Windows 10 with the default keymap:
Again, which you have may depend on OS (I'm assuming that mainly applies to Mac though) and your keymap, but you can automatically indent your code as per language standards using Ctrl+Alt+I.
Note that this mainly does indentation. If you chose to golf code and want to ungolf it, this will not work. At least it doesn't for Java.
However: This only works with code files the IDE or plugins support. This won't work for i.e. a .txt file out of the box.
If I misunderstood you and you only want to remove tabs without doing the auto-indent, there's at least two other options.
The first option is using multiple cursors. You can add an additional cursor with shift+alt+a mouse click where you want the cursor, or holding the mouse wheel and moving the cursor with the mouse wheel held down. There might be other methods as well, but those are the two I know of.
Once you have multiple cursors, delete the tabs just like normal. But be careful! Doing so might delete the entire line itself. If it does, you can do 1 tab/n units per indent level to the left, and press delete instead.
There's (AFAIK) no limit to how many cursors you can have at once, but you can theoretically do it with 50 lines at once if you want to. But general advice - don't add more cursors than you can see at once. These do run in parallel and it's easy to lose track if you're not careful, and you might end up deleting stuff you didn't want to delete.
And finally, the regex solution:
Note: Be careful with this. If you use it incorrectly, you might get unwanted results.
If you only want to do this in a limited area, highlight it first. Then CTRL+R and you'll be presented with the regular replace menu. Make sure Regex and In Selection are selected.
A base regex to go off is ^([\s]{2,4}|\t). Explanation just for reference:
^ - At the start of the line
(
\s{4} - Match 4 spaces
|\t - Or a tab character
)
Replace with nothing and click "replace all" (or just use the regular "replace" button if you want to double-check before you do anything). This will replace one occurrence of 4 spaces or a single tab character. If you use indentation that isn't based on 4, change the number.
This is only useable and useful if you've found yourself with incorrect indentation that's the same across all the relevant lines - it will not fix indentation mistakes and/or inconsistencies such as 3-space indentation when you want 4, or random indetation for the same block. Use the first or alternatively second method for that instead.
In Vim, let's say I want to replace the contents of one String with the content of another.
Original input
var1 = "January"
var2 = "February"
Desired output
var1 = "January"
var2 = "January"
What I would usually do is:
Move cursor to line 1
y i " (yank inner quotes)
Move cursor to the destination quote in line 2
v i " p (visual select inner quotes, paste)
While this works well, I generally try to avoid visual mode when possible, so I am not completely satisfied with my step 4 (v i " p).
Is there any way to specify a "destination paste area" without using Visual mode? I suspect it might be something chained to g, but I can't think of anything.
There are many ways of doing this however using visual mode is the easiest.
Use the black hole register to delete the content then paste. e.g. "_di"P
Do ci"<c-r>0. <c-r> inserts the contents of a register
Simply paste and then move over a character and delete the old text. e.g pldt"
However visual mode still has my vote. I find that the concerns most people have is that using visual mode + paste is that the default register is swap with the selected text and it doesn't repeat well. Good news everybody! The 0 register always stores the last yank. The bad news is visual mode still doesn't repeat well. Take a look at this vimcast episode, Pasting from Visual mode, for more information. It mentions a few plugin that help with this.
I need this so often, I wrote a plugin to simplify and allow maximum speed: ReplaceWithRegister.
This plugin offers a two-in-one gr command that replaces text covered by a {motion} / text object, entire line(s) or the current selection with the contents of a register; the old text is deleted into the black-hole register, i.e. it's gone. It transparently handles many corner cases and allows for a quick repeat via the standard . command. Should you not like it, its page has links to alternatives.
It's not particularly pretty, but here goes:
Go to line one and yi"
Move to line two
Type "_di"hp
That deletes what's in the quotes, but sends the deleted text to a black hole register. Then it moves the cursor back one, and pastes what you yanked from line one.
All in all, you can start on the first line and type yi"j"_di"hp. Why is it that people find vim intimidating? ;)
Alternatively, yank the first line as normal, then drop to line two and type ci"<Ctrl+p> and select the previously yanked text from the menu.
Excerpt from my .vimrc:
" Delete to 'black hole' register
nnoremap <leader>d "_d
vnoremap <leader>d "_d
So, you just need to \di"P as your last step (assuming you use \ as a <leader>).
There is a plugin that addresses this problem precisely. It was presumably born out of the same feeling you're feeling, namely that Visual mode often feels less than ideal to advanced Vim users.
operator-replace – Operator to replace text with register content
With operator-replace installed the replacing goes like this.
Yank the word inside the quotes.
yi"
Move to the target line
j
Replace inside the quotes with the yanked text. (I've set up gr as the replace operator: :map gr <Plug>(operator-replace). Pick your own mapping.)
gri"
Check it out! This is part of the truly excellent textobj/operator frameworks. I couldn't work without them.
I have started working on a huge PHP application that has thousands of lines of code in each file, with lots of huge if blocks, classes, and functions all existing in the same file. I'm not the only dev working on it, so I cannot refactor!
I have tried using the Tags List plugin but it does not really help. Is there any way to have VIM respect only a particular code block, and ignore the rest of the file? I am hoping for some or all of these features:
Enable line numbering only for the current code block, starting from 1 at the line containing the opening {, and showing no numbering for lines preceding it or after the closing }.
Searching with / would be restricted only to the block in question.
I am thinking along the lines of selecting the current block and editing it in a new buffer when enabling the mode, then replacing the existing block with the edited block when exiting the mode. However, I am having trouble actually implementing this feature. My current version is this:
map <F7> <Esc>mO<C-V>aBy:new<Return>p:set nu<Return>:set ft=php<Return>ggi<?php<Return><Esc>
map <F8> <Esc>ggdd<C-V>aBx:bp<Return>`O<C-V>aBp
However, this has several issues, such as the inability to perform incremental saves.
I would be very surprised if Vim allows the kind of line numbering you ask for.
This plugin (and 1 or 2 similar ones IIRC) allows you to visually select a region of your current file, work on it in another buffer and put everything back in its place in the original file on :w.
Even if it's not the solution you are wanting, I think the following can help you to solve your problem.
You can use phpfolding plugin, which folds by PHP syntax (functions, classes, methods, PhpDoc...)
You can then select a fold by pressing v$ over the closed fold and execute whatever you want with :whatever. For example, :s/this/self/g to substitute all this for self in the fold. When you press :, vim will automatically add '<,'> to denote following command it's only for the visually selected text.
I would like to mimic Textmates CTRL+ALT+w, which creates a new pair of opening and closing HTML tags on the same line.
In VIM Surround I'm using CTRL+st in Edit mode for this, but it always indents and creates a new line after setting the tag, so that it looks like this (* = cursor position):
<p>
*
</p>
Is there a way to achieve this? :
<p>*</p>
I guess your problem is that the selected area is "line wise". For example, if you select a few lives with V and surround it with tags, the tags will be placed one line above and one bellow the selected lines.
You probably want to create a "character wise" selection, with v before surrounding it.
Anyway, please post the map you created, so we can help debugging this.
Update
After some clarification in the comments, I would tell you that the surround plugin is not the best option. As its name describes, it was created to deal with surrounded content. So you may need content to surround.
In your case, I recommend taking a look in HTML AutoCloseTag. This plugin closes the html tag once you type the >. It is certainly more appropriated, and uses less keystrokes than surround.
<p <--- Now when you type ">", if becomes:
<p>|</p> <--- Where "|" is the cursor.
Obviously, you will get this behavior to every tag. But that may be handy if you like it.
From normal mode, type vstp> to enter visual mode and output an opening and closing <p> tag on the same line at the current cursor position. Use a capital S to maintain the current indent level.
This doesn't place the cursor in between the tags as you describe, but neither does Textmate's CtrlW shortcut (I think you meant CTRL+Shift+w, not CTRL+ALT+w, as the latter just outputs a diamond sign.)
My answer is probably coming to late, but I'll try to help.
I had similar problem with Vimsurround plugin. Every time I select sentence (one line) using ctrl+V and try to surround it with something I get this:
{
var myVar
}
instead of this:
{ var myVar } // what I wanted
I found easy solution: From a normal mode I choose a line with vis command and then I type capital C (my vim surround mapping ) and choose brackets to surround.Then I get one line nicely surrounded.
The question title is technically mislabeled based on what the author was actually looking for, but since I was actually looking for the answer to the question asked in the title, I figure I should provide an answer to it as well.
To create a new tag surrounding an element without the automatic indentation Vim Surround uses when using a block wise selection (ie: VysS), you can instead do something like:
^ys$
This command will move your cursor to the first non-blank character of the line, issue the command that you want to utilize You Surround, and move to the end of the line. Then, simply start entering your tag.
The result is this:
<input type="email" name="email">
Could become something like this:
<li><input type="email" name="email"></li>
The command is repeatable as well with . and all the normal other Vim goodness.
Stumbled upon this question because I was wondering this as well - I believe the simplest way to do this is just:
yss<p>
(yss surrounds a line with something without indenting - see here: http://www.catonmat.net/blog/vim-plugins-surround-vim/)
You can accomplish this by selecting the relevant text object: :h text-objects
...and surrounding that instead of surrounding a Visual Line selection.
The most common example I found myself running into was when trying to surround one tag with another. In that situation, the it and at text objects are quite useful:
*v_at* *at*
at "a tag block", select [count] tag blocks, from the
[count]'th unmatched "<aaa>" backwards to the matching
"</aaa>", including the "<aaa>" and "</aaa>".
See |tag-blocks| about the details.
When used in Visual mode it is made characterwise.
*v_it* *it*
it "inner tag block", select [count] tag blocks, from the
[count]'th unmatched "<aaa>" backwards to the matching
"</aaa>", excluding the "<aaa>" and "</aaa>".
See |tag-blocks| about the details.
When used in Visual mode it is made characterwise.
For example, if you had your cursor in a paragraph and you wanted to surround it with a div on the same line, ysat<div> would accomplish that.
Selecting a large amount of text that extends over many screens in an IDE like Eclipse is fairly easy since you can use the mouse, but what is the best way to e.g. select and delete multiscreen blocks of text or write e.g. three large methods out to another file and then delete them for testing purposes in Vim when using it via putty/ssh where you cannot use the mouse?
I can easily yank-to-the-end-of-line or yank-to-the-end-of-code-block but if the text extends over many screens, or has lots of blank lines in it, I feel like my hands are tied in Vim. Any solutions?
And a related question: is there a way to somehow select 40 lines, and then comment them all out (with "#" or "//"), as is common in most IDEs?
Well, first of all, you can set vim to work with the mouse, which would allow you to select text just like you would in Eclipse.
You can also use the Visual selection - v, by default. Once selected, you can yank, cut, etc.
As far as commenting out the block, I usually select it with VISUAL, then do
:'<,'>s/^/# /
Replacing the beginning of each line with a #. (The '< and '> markers are the beginning and and of the visual selection.
Use markers.
Go to the top of the text block you want to delete and enter
ma
anywhere on that line. No need for the colon.
Then go to the end of the block and enter the following:
:'a,.d
Entering ma has set marker a for the character under the cursor.
The command you have entered after moving to the bottom of the text block says "from the line containing the character described by marker a ('a) to the current line (.) delete."
This sort of thing can be used for other things as well.
:'a,.ya b - yank from 'a to current line and put in buffer 'b'
:'a,.ya B - yank from 'a to current line and append to buffer 'b'
:'a,.s/^/#/ - from 'a to current line, substitute '#' for line begin
(i.e. comment out in Perl)
:'s,.s#^#//# - from 'a to current line, substitute '//' for line begin
(i.e. comment out in C++)
N.B. 'a (apostrophe-a) refers to the line containing the character marked by a. ``a(backtick-a) refers to the character marked bya`.
To insert comments select the beginning characters of the lines using CTRL-v (blockwise-visual, not 'v' character wise-visual or 'V' linewise-visual). Then go to insert-mode using 'I', enter your comment-character(s) on the first line (for example '#') and finally escape to normal mode using 'Esc'. Voila!
To remove the comments use blockwise-visual to select the comments and just delete them using 'x'.
Use the visual block command v (or V for whole lines and C-V for rectangular blocks). While in visual block mode, you can use any motion commands including search; I use } frequently to skip to the next blank line. Once the block is marked, you can :w it to a file, delete, yank, or whatever. If you execute a command and the visual block goes away, re-select the same block with gv. See :help visual-change for more.
I think there are language-specific scripts that come with vim that do things like comment out blocks of code in a way that fits your language of choice.
Press V (uppercase V) and then press 40j to select 40 lines and then press d to delete them. Or as #zigdon replied, you can comment them out.
The visual mode is the solution for your main problem. As to commenting out sections of code, there are many plugins for that on vim.org, I am using tComment.vim at the moment.
There is also a neat way to comment out a block without a plugin. Lets say you work in python and # is the comment character. Make a visual block selection of the column you want the hash sign to be in, and type I#ESCAPE. To enter a visual block mode press C-q on windows or C-v on linux.
My block comment technique:
Ctrl+V to start blockwise visual mode.
Make your selection.
With the selection still active, Shift+I. This put you into column insert mode.
Type you comment characters '#' or '//' or whatever.
ESC.
Or you may want to give this script a try...
http://www.vim.org/scripts/script.php?script_id=23
For commenting out lines, I would suggest one of these plugins:
EnhancedCommentify
NERD Commenter
I find myself using NERD more these days, but I've used EnhancedCommentify for years.
If you want to perform an action on a range of lines, and you know the line numbers, you can put the range on the command line. For instance, to delete lines 20 through 200 you can do:
:20,200d
To move lines 20 through 200 to where line 300 is you can use:
:20,200m300
And so on.
Use Shift+V to go in visual mode, then you can select lines and delete / change them.
My usual method for commenting out 40 lines would be to put the cursor on the first line and enter the command:
:.,+40s/^/# /
(For here thru 40 lines forward, substitute start-of-line with hash, space)
Seems a bit longer than some other methods suggested, but I like to do things with the keyboard instead of the mouse.
First answer is currently not quite right?
To comment out selection press ':' and type command
:'<,'>s/^/# /g
('<, '> - will be there automatically)
You should be aware of the normal mode command [count]CTRL-D.
It optionally changes the 'scroll' option from 10 to [count], and then scrolls down that many lines. Pressing CTRL-D again will scroll down that same lines again.
So try entering
V "visual line selection mode
30 "optionally set scroll value to 30
CTRL-D "jump down a screen, repeated as necessary
y " yank your selection
CTRL-U works the same way but scrolls up.
v enters visual block mode, where you can select as if with shift in most common editors, later you can do anything you can normally do with normal commands (substitution :'<,'>s/^/#/ to prepend with a comment, for instance) where '<,'> means the selected visual block instead of all the text.
marks would be the simplest mb where u want to begin and me where u want to end once this is done you can do pretty much anything you want
:'b,'ed
deletes from marker b to marker e
commenting out 40 lines you can do in the visual mode
V40j:s/^/#/
will comment out 40 lines from where u start the sequence