Can I see spartacus storefront in smartedit preview mode of local environment? is my previous question about smartedit(CX 2005.0) & spartacus.
Thanks to #geffchang, Finally I could see spartacus storefront in smartedit.
But When I selected any pages in smartedit, these error messages appeared as below.
SmartEdit is having difficulty loading the page. The page is either
not compatible with SmartEdit or connection to it has been lost. Wait
for the page to load or disable editing by going to Preview mode.
After I waited for a moment in no action, I can see additional error message as below.
No composed type exists
So I clicked the preview link in first error message then browser moved to preview mode.
I move to mouse to "I icon" in left top, I can see alert message as below.
You cannot change modes. The page is either not compatible with
SmartEdit or connection to it has been lost. Refresh the page or go to
another page.
This status of smartedit is all right? Are there any additional set up?
(Please pardon me for this question might be not a part of spartacus but CX. sorry)
I edit this question.
I just added personalization config to app.module.ts then smartedit's all error messages disappeared.
Furthermore I could see preview only before, now I can see Basic Edit, Advanced Edit, Personalization.
Does the smartedit take some time to ready for working?
Can you try to open HAC first? After that, open the page in SmartEdit again.
Related
I am trying to setup xPage as Welcome page for notes client and to be deployed via policies. Only issue it opens up 2 window, one which is Bookmarks.nsf frameset and second one is the xPage. Tried many different ways to close frameset, but some internal setting doesn't like this since its a welcome page frame... any ideas or if somebody has done similar project.
I tried opening a view thru welcome page which opens up the xPage and then to close the view in Postopen event, but no luck. also tried same with Form.
Appreciate help .. badly stuck in it.
One way to do that is:
open your xpage in the client
right click on the tab and create a new bookmark for it
right click on the newly created bookmark and click "set bookmark as home page"
I don't know if you can do that via policies, but at least it works if I do it interactively
You can set this by policy by adding to the ini
StartupDB =
That will load the NSF every time the client opens. This command does not respect the enforce flag as its enforced by default, do not set the enforce flag...
You can also set the nsf to replicate by policy so remote users will be able to open it as well.
On my sharepoint site I am unable to add an existing basic webpart to a page where I've added webparts before. I am a site owner. I am using IE 8. I also work remotely using VPN.
The strange thing is IE won't even open up the EDIT MODE.
When I use Google Chrome, it is able to open up EDIT MODE, and it was also able to open up the Add Web Part popup, but when you actually select a web part and press ADD...nothing gets added to the main page.
The extra strange thing is from Google Chrome, I am able to delete and modify existing webparts.
I've upgraded to IE 9 and the same issue still happens.
i assume the similar issue you would be facing with firefox it seems your css is not compliant with IE8 try using ie8 in campatibility mode or use following querystring parameter at end of ur url
toolpaneview=2 and see what is the result
I had that problem and it appeared that a CSS file was messing up with the Ribbon controls.
Try to disable a CSS file at a time.
Regards,
Pedro
We had this issue (or at least a very similar one) where, in edit page mode, clicking on 'Add a Web Part' had no effect. I was assuming that it is a JavaScript issue. In, I beleive, the same day, it effected both my Production and DEV Site Collections, in IE8, Firefox and Chrome. We restarted all of our servers and ran the config wizard. No good.
We were able to create new pages which seem to be uneffected.
For an existing page, our workaround is to edit the properties of the page, then, down at the bottom, select 'Open Page in Maintenance View'. Select one of the Web Parts and Close it. Note: It seems as though if you unselected the 'Allow Close' checkbox, it wont be on this list. Then click on the 'Go Back to Web Part Page'. Click on the zone where the closed Web Part was. You may now be able to 'Add a Web Part'. If so, the last Web Part folder on the left will be 'Closed Web Parts' which I beleive you can put back (Open) the closed Web Part.
I have see this issue occur when someone else has the current page open in edit mode. Until that person either checks in or undoes there checkout you will not be able to edit the page.
I have a very strange issue I just cannot figure out. I am not able to enter Edit Mode on my custom pages. Appending my URL with ?ToolPaneView=2 does nothing. Manipulating the Site Actions button to custom content and changing the MenuItem_EditPage to get the Edit Page button back bring the page into some kind of edit mode with the "Exit Edit Mode" button but still no toolbar or ability to manipulate web parts.
Anyone seen this before?
Thanks
My experience was that the page was created with the SharePoint Server Publishing feature turned on. The site feature was later deactivated and the page could not be edited. Re-activating the feature enabled editing.
I had it once when the page was checked out by the system user.
Discard the current check-out (and lose changes) and I could edit the page again.
I'm working on creating a reusable and extensible web application in SharePoint 2010. I've created a master page to apply across all pages in the site. However, whenever I create a web part page and navigate to it, the site icon does not display. Instead of my custom site icon being displayed it shows the default SharePoint icon. I can get around this by placing the icon directly into the master page, but that would require me to create a new master page if I ever wanted to extend this web application.
Does anyone know why this is happening? My initial thought was that the web part page had somehow been customized to not use the default master page, but that does not seem to be the case: if I update the master page it is reflected in the web part page.
Googling around and checking this site yielded little answers. I only found one post out there that reported the same issue I am observing but there was no solution.
If it helps, I did notice one phenomena when navigating to this page. Before the page completely loads, the correct site icon appears for a split second before being replaced with the default site icon. Hope that helps.
I ran into the same issue this morning and didn't want to create a custom master page just for this, but luckily it was quickly resolved by following admlcrunch's suggestion (on SharePoint 2010):
Go to the desire page
Click on the "Page" tab at the top
Click on the "Title Bar Properties" at the right (in the ribbon)
In the Image Link section on the right, paste in the image URL
Click OK
The only bad thing about this is, you have to update every Web Part page that you want custom icon image to display.
I was just having the same issue. Web Part Pages have their own icon that you can set.
To set the icon click Page > Title Bar Properties. This will open the Web Part Page Title Bar dialog. In this dialog there is an area to set the Image Link. You can set the icon here. I just copied the URL to the site icon.
Open the page in designer and remove the custom titlebar place holder:
[WebPartPages:TitleBarWebPart]
from the :
[asp:Content ContentPlaceHolderId="PlaceHolderPageTitleInTitleArea"]
So I created this web part page on sharepoint, but everytime when I add a web part, the entire view gets squished into a narrow window. This makes it impossible to "modify shared web part" because all you can see on the menu pane are OK, Cancel and Apply. You can't fill in any detail or change anything from appearance to layout because you can't really see these options and put your mouse on them.
Thanks in advance for any help
I'm not sure if you want help with determine why this happens, or if you just want to get rid of the faulting web part?
If the latter, you can access the web part admin page by adding ?contents=1 to the URL to remove the web part in question.
This method is documented documented here.
http://<yourserverpath>/yourpage.aspx?contents=1
HTTP:\\MySPRootSite/pages/default.aspx?ToolPaneView=2
This will help u to forcibly display the page in edit mode.
I am struck with forcibly editing a web part in the page after the page is displayed in edit mode.