Related
I have this set of numbers.
74, 15, 60, 5, 61, 56, 4, 23, 47, 66, 20, 54, 39, 9, 34, 37, 45, 93, 85, 79, 4, 76, 85, 51, 78, 60, 95, 50, 79, 62, 21, 75, 18, 5, 79, 46, 76, 92, 11, 100, 51, 39, 80, 92, 95, 20, 62, 1, 22, 69, 65, 45, 34, 42, 40, 8, 29, 82, 38, 9, 100, 78, 22, 11, 57, 71, 38, 35, 37, 32, 19, 58, 91, 90, 91, 26, 38, 85, 96, 3, 80, 18, 32, 74, 97, 60, 65, 85, 92, 38, 12, 31, 37, 76, 84, 9, 17, 33, 20, 19
I would like to divide this set of numbers into 4 parts/columns in excel so that their sum is as close as possible to 1/4 of the value of all numbers
Total of all numbers is 5049. 1/4 equals 1262.25 .
Is the sort of thing you're after?
All those numbers, sorted numerically, then added to columns, the totals almost matching to a quarter of the total...
Issue: Trying to write json buffer data to a file using Perl script.
Scenario:
I will have binary data in Postgres.
So to recreate the scenario, I converted "geeks" into binary format and stored in Postgres.
Input : geeks
Output : 1100111 1100101 1100101 1101011 1110011
Nodejs query the binary data from the postgres and send the response as below in json format.
[
{
"lo_get": {
"type": "Buffer",
"data": [
49,
49,
48,
48,
49,
49,
49,
32,
49,
49,
48,
48,
49,
48,
49,
32,
49,
49,
48,
48,
49,
48,
49,
32,
49,
49,
48,
49,
48,
49,
49,
32,
49,
49,
49,
48,
48,
49,
49
]
}
}
]
Below is the Perl script I have written but I am not sure how to write the original string i.e. "geeks" to the file ..
$req = HTTP::Request->new(GET => $url);
$res = $ua->request($req);
$response = decode_json($res->content);
if ($res->is_success & #$response) {
$string = #$response[0]->{Output}->{data};
print ($string);
}
open my $fh, ">", "data_out.json";
print $fh encode_json($string);
close $fh;
Am not sure how can i get the file with 'geeks' as content.
my $binary =
pack 'C*',
#{ $response->[0]{lo_get}{data} };
say $binary; # '1100111 1100101 1100101 1101011 1110011
my $bytes =
pack 'C*',
map { oct("0b$_") }
split(' ', $binary);
say $bytes; # geeks
It is converted into binary
This makes no sense. In addition to the needless extra work converting the bytes into their binary representation or back when accessing the database, it multiplies the storage needed by 9 for nothing!
Algorithm to solution of the problem:
Obtain data into hash ref
use operator map with split to convert numbers into bin representation
join array of converted with chr and oct bin numbers into a string
process string as you desire
use strict;
use warnings;
use feature 'say';
use JSON;
use Data::Dumper;
my $fname = 'data.txt';
my $input = do { local $/; <DATA> };
my $data = from_json($input);
say 'Read: ' . Dumper($data);
my $str = join '', map { chr } #{$data->[0]{lo_get}{data}};
my #bin = map { '0b' . $_ } split ' ', $str;
$str = join '', map { chr oct($_) } #bin;
say 'Out: ' . $str;
open my $fh, '>', $fname
or die "Couldn't open $fname";
say $fh $str;
close $fh;
__DATA__
[
{
"lo_get": {
"type": "Buffer",
"data": [
49,
49,
48,
48,
49,
49,
49,
32,
49,
49,
48,
48,
49,
48,
49,
32,
49,
49,
48,
48,
49,
48,
49,
32,
49,
49,
48,
49,
48,
49,
49,
32,
49,
49,
49,
48,
48,
49,
49
]
}
}
]
Run as script.pl
Read: $VAR1 = [
{
'lo_get' => {
'type' => 'Buffer',
'data' => [
49,
49,
48,
48,
49,
49,
49,
32,
49,
49,
48,
48,
49,
48,
49,
32,
49,
49,
48,
48,
49,
48,
49,
32,
49,
49,
48,
49,
48,
49,
49,
32,
49,
49,
49,
48,
48,
49,
49
]
}
}
];
Out: geeks
Content of the file data.txt
geeks
I have a .mat file and want to convert it into a CV image format such that I can use it for a CNN model.
I am trying to obtain an RGB/ other colored image and not gray.
I tried doing the following(below) but I get a grayscale image, but when I plot the actual mat file using matplotlib it is not grayscale. Also, the .mat file has a px_spacing array apart from the image array. I am not sure how this is helpful.
def mat_to_image(mat_image):
f = loadmat(mat_image,appendmat=True)
image = np.array(f.get('I')).astype(np.float32)
mean = image.mean()
std= image.std()
print(mean, std)
hi = np.max(image)
lo = np.min(image)
image = (((image - lo)/(hi-lo))*255).astype(np.uint8)
im = Image.fromarray(image,mode='RGB')
return im
images=mat_to_image(dir/filename)
cv_img = cv2.cvtColor(np.array(images), cv2.COLOR_GRAY2RGB)
Normally plotting the .mat file fetches a non-grayscale(RGB image)
imgplot= plt.imshow(loadmat(img,appendmat=True).get('I'))
plt.show()
Here is how the mat file looks after print(loadmat('filename'))
{'__header__': b'MATLAB 5.0 MAT-file, Platform: PCWIN64, Created on: Mon Sep 9 11:32:54 2019',
'__version__': '1.0',
'__globals__': [],
'I': array([
[ 81, 75, 74, 75, -11, 14, 49, 37, 29, -24, -183, -349, -581, -740],
[ 51, 33, 67, 36, 1, 42, 30, 49, 47, 42, 14, -85, -465, -727],
[ 23, 31, 36, 20, 54, 70, 44, 56, 56, 79, 62, 19, -204, -595],
[ 7, 12, 36, 47, 59, 68, 74, 56, 59, 100, 74, 34, -3, -353],
[ 23, 19, 51, 87, 86, 79, 91, 76, 96, 95, 52, 51, 74, -141],
[ 18, 51, 54, 97, 93, 94, 98, 83, 119, 71, 36, 69, 50, -16],
[ -10, 5, 53, 92, 69, 87, 103, 114, 118, 77, 51, 68, 30, 0],
[ -24, 11, 74, 80, 49, 68, 106, 129, 107, 63, 57, 70, 39, -1],
[ -45, 43, 83, 69, 43, 64, 98, 108, 90, 35, 27, 55, 31, -13],
[ -9, 32, 83, 78, 66, 106, 89, 85, 58, 43, 31, 39, 28, 7],
[ 45, 35, 76, 45, 51, 84, 55, 66, 49, 41, 39, 28, 13, -7],
[ 85, 67, 61, 45, 69, 53, 23, 32, 31, -12, -34, -182, -376, -425],
[ 136, 93, 71, 54, 30, 39, 17, -21, -29, -43, -101, -514, -792, -816]
], dtype=int16),
'px_spacing': array([[0.78125]])}
interface port-channel 1
ALLOWED_VLAN 2,4-7,27,30-31,38-39,41-42,48-50
ALLOWED_VLAN 74,678,1101-1102,1201-1202
interface port-channel 2
ALLOWED_VLAN 37,51-73,75-76,1051-1052,2001
interface port-channel 101
ALLOWED_VLAN 10,18-19,37,39,51-52,75-76,901-902
ALLOWED_VLAN 2901-2902,3204,3305
import re
import itertools
fileOpen3 = open('C:\\Python36\\execrice\\inter.txt')
list3 = []
for line in fileOpen3.readlines():
if line.startswith('ALLOWED_VLAN'):
allowedVlan = re.compile(r'\d+\S+')
list1 = allowedVlan.findall(line)
st1 = list1[0]
pv1 = st1.split(',')
list3.append(pv1)
merged = list(itertools.chain.from_iterable(list3))
singleVlanDigit = []
expandedVlan1 = []
for i in merged:
rangeOfVlan = []
if '-' in i:
rangeOfVlan.append(i)
else:
singleVlanDigit.append(i)
singleVlanDigit = list(map(int,singleVlanDigit))
for j in rangeOfVlan:
l = j.split('-')
startVlan = int(l[0])
endVlan = int(l[1])
for k in range(startVlan,endVlan):
expandedVlan1.append(k)
vlanallowed = singleVlanDigit + expandedVlan1
vlanallowed = list(map(int,vlanallowed))
print (vlanallowed)
elif line.startswith('interface port-channel'):
list3=[]
print ("interface port-channel")
fileOpen3.close()
my program combines all the digits in one single list where as i want it to stop when it reads the "interface port-channel 2" and so on
i want the output of this program to be as below
interface port-channel
[2, 27, 4, 5, 6, 30, 38, 41, 48, 49, 74, 678, 1101, 1201]
interface port-channel
[37, 2001, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 75, 1051]
interface port-channel
[10, 37, 39, 18, 51, 75, 901, 3204, 3305, 2901]
but it produces the below output
interface port-channel
[2, 27, 4, 5, 6, 30, 38, 41, 48, 49]
[2, 27, 74, 678, 4, 5, 6, 30, 38, 41, 48, 49, 1101, 1201]
interface port-channel
[2, 27, 74, 678, 37, 2001, 4, 5, 6, 30, 38, 41, 48, 49, 1101, 1201, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 75, 1051]
interface port-channel
[2, 27, 74, 678, 37, 2001, 10, 37, 39, 4, 5, 6, 30, 38, 41, 48, 49, 1101, 1201, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 75, 1051, 18, 51, 75, 901]
[2, 27, 74, 678, 37, 2001, 10, 37, 39, 3204, 3305, 4, 5, 6, 30, 38, 41, 48, 49, 1101, 1201, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 75, 1051, 18, 51, 75, 901, 2901]
after reinitialising the list3 in elif block as suggested by Boar i got the below results which is very to my end results
interface port-channel
[2, 27, 4, 5, 6, 30, 38, 41, 48, 49]
[2, 27, 74, 678, 4, 5, 6, 30, 38, 41, 48, 49, 1101, 1201]
interface port-channel
[37, 2001, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 75, 1051]
interface port-channel
[10, 37, 39, 18, 51, 75, 901]
[10, 37, 39, 3204, 3305, 18, 51, 75, 901, 2901]
but i want the results to be like this
interface port-channel
[2, 27, 74, 678, 4, 5, 6, 30, 38, 41, 48, 49, 1101, 1201]
interface port-channel
[37, 2001, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 75, 1051]
interface port-channel
[10, 37, 39, 3204, 3305, 18, 51, 75, 901, 2901]
I've had to guess at where the line breaks fall in your data but I think I have it right.
The repeated data is because you are initializing list3 in the wrong place. It should be after if line.startswith('ALLOWED_VLAN'):
With that fix, your program does this:
interface port-channel
[2, 27, 4, 5, 6, 30, 38, 41, 48, 49]
[74, 678, 1101, 1201]
interface port-channel
[37, 2001, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 75, 1051]
interface port-channel
[10, 37, 39, 18, 51, 75, 901]
[3204, 3305, 2901]
which is close to what you want. You just need to combine the lists of integers before printing them. Combine the values of vnlanallowed in the if part of the loop, then print it out and reinitialize it in the elif part.
To get the exact format of the output you want, you need to wait until you know you have all of the lists of port-channel numbers before printing them. You only know that when you see a new list start, or you reach end-of-file.
import re
import itertools
fileOpen3 = open(r'E:\...\inter.txt')
channel_list = []
for line in fileOpen3.readlines():
if line.startswith('ALLOWED_VLAN'):
list3 = []
allowedVlan = re.compile(r'\d+\S+')
list1 = allowedVlan.findall(line)
st1 = list1[0]
pv1 = st1.split(',')
list3.append(pv1)
merged = list(itertools.chain.from_iterable(list3))
singleVlanDigit = []
expandedVlan1 = []
for i in merged:
rangeOfVlan = []
if '-' in i:
rangeOfVlan.append(i)
else:
singleVlanDigit.append(i)
singleVlanDigit = list(map(int,singleVlanDigit))
for j in rangeOfVlan:
l = j.split('-')
startVlan = int(l[0])
endVlan = int(l[1])
for k in range(startVlan,endVlan):
expandedVlan1.append(k)
vlanallowed = singleVlanDigit + expandedVlan1
vlanallowed = list(map(int,vlanallowed))
#print (vlanallowed)
channel_list.extend(vlanallowed)
elif line.startswith('interface port-channel'):
if channel_list:
print ("interface port-channel", channel_list)
channel_list = []
print("interface port-channel", channel_list)
fileOpen3.close()
my code:
def originalList = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100]
def newList = orginalList.percent(0.05,0.95) //I have no idea what I'm doing here
println newList
I have an original list of numbers, they are 1 - 100 and i want to make a new list from the original list however the new list must only have data that belongs to the sub-range 5%- 95% of the original list
so the new list must be like [5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18....95]. How do i do that? i know my newList code is wrong
You mean like:
originalList[ 4..94 ] // zero starting pos
Or do you need percentages?
You could do:
originalList[ (originalList.size() * 0.05 - 1)..<(originalList.size() * 0.95) ]
You could also use the metaClass:
List.metaClass.percent { double lower, double upper ->
int d = lower * delegate.size() - 1
int t = upper * delegate.size()
delegate.take( t ).drop( d )
}
originalList.percent( 0.05, 0.95 )