Cannot push updated file to remote git repository - linux

Please look at this example:
pi#rpi2:~/git/test $ mkdir remote_rep
pi#rpi2:~/git/test $ cd remote_rep/
pi#rpi2:~/git/test/remote_rep $ git init
Initialized empty Git repository in /home/pi/git/test/remote_rep/.git/
pi#rpi2:~/git/test/remote_rep $ touch readme.txt
pi#rpi2:~/git/test/remote_rep $ git add readme.txt
pi#rpi2:~/git/test/remote_rep $ git commit -m "initial commit"
[master (root-commit) 4dd0ba4] initial commit
1 file changed, 0 insertions(+), 0 deletions(-)
create mode 100644 readme.txt
pi#rpi2:~/git/test/remote_rep $ git status
On branch master
nothing to commit, working tree clean
pi#rpi2:~/git/test/remote_rep $ git log
commit 4dd0ba4797989d39dd7bb42da8de58dfac3ebad8
Author: pi <pi#abc.com>
Date: Mon Sep 21 20:13:19 2020 +0000
initial commit
pi#rpi2:~/git/test/remote_rep $ cd ..
pi#rpi2:~/git/test $ mkdir local
pi#rpi2:~/git/test $ cd local/
pi#rpi2:~/git/test/local $ git clone ~/git/test/remote_rep/
Cloning into 'remote_rep'...
done.
pi#rpi2:~/git/test/local $ ls
remote_rep
pi#rpi2:~/git/test/local $ cd remote_rep/
pi#rpi2:~/git/test/local/remote_rep $ ls
readme.txt
pi#rpi2:~/git/test/local/remote_rep $ cat readme.txt
pi#rpi2:~/git/test/local/remote_rep $ echo "abc" > readme.txt
pi#rpi2:~/git/test/local/remote_rep $ cat readme.txt
abc
pi#rpi2:~/git/test/local/remote_rep $ git commit -m "updated readme.txt"
On branch master
Your branch is up-to-date with 'origin/master'.
Changes not staged for commit:
modified: readme.txt
no changes added to commit
pi#rpi2:~/git/test/local/remote_rep $ git push
Everything up-to-date
pi#rpi2:~/git/test/local/remote_rep $ git remote show
origin
pi#rpi2:~/git/test/local/remote_rep $ git remote -v
origin /home/pi/git/test/remote_rep/ (fetch)
origin /home/pi/git/test/remote_rep/ (push)
pi#rpi2:~/git/test/local/remote_rep $
How come that by issuing:
pi#rpi2:~/git/test/local/remote_rep $ git push
Everything up-to-date
I got a message "Everything up-to-date", but as you can see readme.txt has been changed.
If I continue with:
pi#rpi2:~/git/test/local/remote_rep $ git add readme.txt
pi#rpi2:~/git/test/local/remote_rep $ git commit -m "updated abc"
[master 136cdba] updated abc
1 file changed, 1 insertion(+)
pi#rpi2:~/git/test/local/remote_rep $ git push
Counting objects: 3, done.
Writing objects: 100% (3/3), 241 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
remote: error: refusing to update checked out branch: refs/heads/master
remote: error: By default, updating the current branch in a non-bare repository
remote: is denied, because it will make the index and work tree inconsistent
remote: with what you pushed, and will require 'git reset --hard' to match
remote: the work tree to HEAD.
remote:
remote: You can set 'receive.denyCurrentBranch' configuration variable to
remote: 'ignore' or 'warn' in the remote repository to allow pushing into
remote: its current branch; however, this is not recommended unless you
remote: arranged to update its work tree to match what you pushed in some
remote: other way.
remote:
remote: To squelch this message and still keep the default behaviour, set
remote: 'receive.denyCurrentBranch' configuration variable to 'refuse'.
To /home/pi/git/test/remote_rep/
! [remote rejected] master -> master (branch is currently checked out)
error: failed to push some refs to '/home/pi/git/test/remote_rep/'
pi#rpi2:~/git/test/local/remote_rep $
What am I missing?
git version 2.11.0
I cannot submit this question due to stackoverflow error: "It looks like your post is mostly code; please add some more details.", so I am adding here this text just to change discrepancy. Please ignore this last paragraph.

Your first git push actually succeeded, but did nothing. The reason is that your git commit -m "updated readme.txt" did nothing either, and therefore there were no commits to send. (Note that git push sends commits, not files. The commits contain files, but in this case, there was no new commit to send.)
Your second git push failed because the other Git didn't like it. That's not something you can fix from the Git that runs git push. Well, that's not entirely true: you can push a different commit, or to a different name, in an effort to please the other Git—but that's not what you should do here.
Since you actually control both Git repositories, what you should do is switch stances. Instead of acting as the client, in the client Git, you would go over to the server and work in the server Git. The error message that the server Git sent over to the client Git, that the client Git prefixed with remote: in front of each line, is exactly the message you should deliver to the person in control over the server Git. In this case, that's yourself, so now, acting as the person in control of the server, now you should pay attention to all those remote: lines. Read them now, then think about how you want the server Git to behave:
The usual solution is to have a bare repository (created with git init --bare). A bare repository has no working tree. With no working tree in it, no one can do any work in it. This means there is no problem with messing up the current work being done in the server repository: with no one working in it, there is no current work being done, and nothing to mess up. Of course, this also means you can't do any work there, but if that's what you want, that's the right way to go.
The long error message offers some alternatives, if you do want to be able to do work on the server. (It probably should also mention the updateInstead mode, which was new in Git 2.10; I'm not sure why it does not.)
The long message does not mention that if you want the server to deploy a commit, you can do that. But Git makes a fairly lousy deployment system: if you want to automatically deploy certain updates, you probably should obtain or write a deployment system, rather than just using raw Git directly.

Related

gitolite: error: src refspec master does not match any

I have created an empty git repository by use of gitolite and cloned it to my laptop. Usually, I can add files to it on my laptop on and push them to the repo but now an error occurs:
user#laptop Myproject % git clone newergit:Repo-Myrepo
Cloning into 'Repo-Myrepo'...
warning: You appear to have cloned an empty repository.
user#laptop Myproject % cd Repo-Myrepo
user#laptop Repo-Myrepo % vi test.txt
user#laptop Repo-Myrepo % git add test.txt
user#laptop Repo-Myrepo % git commit -m "add test file to repo"
[main (root-commit) 27aa970] add test file to repo
1 file changed, 1 insertion(+)
create mode 100644 test.txt
user#laptop Repo-Myrepo % git push origin master
error: src refspec master does not match any
error: failed to push some refs to 'newergit:Repo-Myrepo'
This used to work in the past but newly I am experiencing this error and don't know how to proceed?
Unfortunately, git branch -al did not resolve the problem
A git branch -avv is only there to list the local and remote branches, for you to understand which branch was created (locally by your git commit and remotely by Gitolite)
If you use Git 2.37+, you can activate the
git config --global push.autoSetupRemote true
From there, a simple git push (without any additional parameter) should be enough. It will pick the right branch name (the current one) and push it to the remote with remote tracking.

How can I modify a file in VSCode?

I'm a beginner in Linux and Git/Github.
I tried to pull files from VSCode to github and it didn't work. It only pulled the file which I have added recently so only the one which was tracked. And the mainfile was not even modified,so it hasn't the big M behind the filename. I was watching the freecodecamp tutorial on yt about git and github for beginners and I did everything as they have shown me in the video so far.You can see it in the image below.
EDIT:
#Ashutosh Yadav
tomas#art:~/desktop/git/repo56$ git init
Initialized empty Git repository in /home/tomas/desktop/git/repo56/.git/ tomas#art:~/desktop/git/repo56$ git status
On branch master No commits yet Untracked files: (use "git add ..." to include in what will be committed) README.md nothing added to commit but untracked files present (use "git add" to track) tomas#art:~/desktop/git/repo56$ git add README.md
tomas#art:~/desktop/git/repo56$ git status
On branch master No commits yet Changes to be committed: (use "git rm --cached ..." to unstage) new file: README.md
tomas#art:~/desktop/git/repo56$ git commit -m "created README" -m "Please work test!"
[master (root-commit) b53d907] created README 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 README.md
tomas#art:~/desktop/git/repo56$ git push origin master
fatal: 'origin' does not appear to be a git repository fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. CREATED NEW REPO ON GITHUB(repo56):
tomas#art:~/desktop/git/repo56$ git remote add origin git#github.com:TB20TB05TB/repo56.git tomas#art:~/desktop/git/repo56$ git remote -v origin
git#github.com:TB20TB05TB/repo56.git (fetch) origin
git#github.com:TB20TB05TB/repo56.git (push)
tomas#art:~/desktop/git/repo56$ git push origin master
Enumerating objects: 3, done. Counting objects: 100% (3/3), done. Writing objects: 100% (3/3), 231 bytes | 231.00 KiB/s, done. Total 3 (delta 0), reused 0 (delta 0), pack-reused 0 To github.com:TB20TB05TB/repo56.git * [new branch] master -> master
As I can see in the given image, Your both files(README.md and index.html) are not saved.
Try these steps:
save both files.
click on this icon
click on + button here.
Then enter your comment in message box and press on commit.
Then click on sync/publish button at the same place.
You are done up here. Your changes are commited and pushed on gitHub.

git#gitlab.com: Permission denied (publickey,keyboard-interactive)

I have a Gitlab repository that contain a number of projects on all of which I can pull and push documents to with Git Bash. I want to set up new project. On the Gitlab website I have created the new project and am following the usual instructions in Git Bash:
cd existing_folder
git init
git remote add origin git#gitlab.com:new_project_name.git
git add .
git commit -m "Initial commit"
git push -u origin master
However when I try push (the last line of the above I get the error:
$ git push -u origin master
error: src refspec master does not match any
error: failed to push some refs to 'git#gitlab.com:new_project_name.git'
(NB: the project name has been replace in this post by new_project_name)
There is a readme file that is ready to be committed.
I know I've missed something or done something incorrectly but I don't know what. I don't understand why I can push to other projects (the pull/ push is working fine) but not this one. What do I need to do in order to git push to the repo?

git: how to use an existing remote workspace as a repo? [duplicate]

Yesterday, I posted a question on how to clone a Git repository from one of my machines to another, How can I 'git clone' from another machine?.
I am now able to successfully clone a Git repository from my source (192.168.1.2) to my destination (192.168.1.1).
But when I did an edit to a file, a git commit -a -m "test" and a git push, I get this error on my destination (192.168.1.1):
git push
hap#192.168.1.2's password:
Counting objects: 21, done.
Compressing objects: 100% (11/11), done.
Writing objects: 100% (11/11), 1010 bytes, done.
Total 11 (delta 9), reused 0 (delta 0)
error: refusing to update checked out branch: refs/heads/master
error: By default, updating the current branch in a non-bare repository
error: is denied, because it will make the index and work tree inconsistent
error: with what you pushed, and will require 'git reset --hard' to match
error: the work tree to HEAD.
error:
error: You can set 'receive.denyCurrentBranch' configuration variable to
error: 'ignore' or 'warn' in the remote repository to allow pushing into
error: its current branch; however, this is not recommended unless you
error: arranged to update its work tree to match what you pushed in some
error: other way.
error:
error: To squelch this message and still keep the default behaviour, set
error: 'receive.denyCurrentBranch' configuration variable to 'refuse'.
To git+ssh://hap#192.168.1.2/media/LINUXDATA/working
! [remote rejected] master -> master (branch is currently checked out)
error: failed to push some refs to 'git+ssh://hap#192.168.1.2/media/LINUXDATA/working'
I'm using two different versions of Git (1.7 on the remote and 1.5 on the local machine). Is that a possible reason?
The error message error: refusing to update checked out branch: refs/heads/master is emitted by the remote repository and it means you're trying to push code to remote non-bare repository that has different code currently checked out in the working directory. The best way to avoid this problem is to push to bare repositories only - this problem cannot ever happen with a bare repository.
You can simply convert your remote repository to bare repository (there is no working copy in the bare repository - the folder contains only the actual repository data).
Execute the following command in your remote repository folder:
git config --bool core.bare true
Then delete all the files except .git in that folder. And then you will be able to perform git push to the remote repository without any errors.
I just had the same error while I began learning Git. Some of the other answers are clearly not for someone new to Git!
I am going to use non technical terms to get the idea across. Anyway, what is happening is that you have two repositories, one is the original you first made, and the other the work one you just made.
Right now you are in your work repository and are using the master branch. But you also happen to be "logged in" in your original repository to the same master branch. Now since you're "logged in" in the original, Git fears you might mess up because you might be working on the original and screw things up. So you need to return to the original repository and do git checkout someotherbranch, and now you can push with no problems.
The error message describes what has happened. More modern versions of Git refuse to update a branch via a push if that branch is checked out.
The easiest way to work between two non-bare repositories is either to
always update the repositories by pull (or fetch and merge) or, if you have to,
by pushing to a separate branch (an import branch) and then merging that branch into the master branch on the remote machine.
The reason for this restriction is that the push operation operates only on the remote Git repository, it doesn't have access to the index and working tree. So, if allowed, a push on the checked-out branch would change the HEAD to be inconsistent with the index and working tree on the remote repository.
This would make it very easy to accidentally commit a change that undoes all of the pushed changes and also makes it very difficult to distinguish between any local changes that have not been committed and differences between the new HEAD, the index and the working tree that have been caused by push moving HEAD.
Summary
You cannot push to the one checked out branch of a repository because it would mess with the user of that repository in a way that will most probably end with loss of data and history. But you can push to any other branch of the same repository.
As bare repositories never have any branch checked out, you can always push to any branch of a bare repository.
There are multiple solutions, depending on your needs.
Solution 1: Use a Bare Repostiory
As suggested, if on one machine, you don't need the working directory, you can move to a bare repository. To avoid messing with the repository, you can just clone it:
machine1$ cd ..
machine1$ mv repo repo.old
machine1$ git clone --bare repo.old repo
Now you can push all you want to the same address as before.
Solution 2: Push to a Non-Checked-Out Branch
But if you need to check out the code on your remote <remote>, then you can use a special branch to push. Let's say that in your local repository you have called your remote origin and you're on branch master. Then you could do
machine2$ git push origin master:master+machine2
Then you need to merge it when you're in the origin remote repo:
machine1$ git merge master+machine2
Autopsy of the Problem
When a branch is checked out, committing will add a new commit with the current branch's head as its parent and move the branch's head to be that new commit.
So
A ← B
↑
[HEAD,branch1]
becomes
A ← B ← C
↑
[HEAD,branch1]
But if someone could push to that branch inbetween, the user would get itself in what git calls detached head mode:
A ← B ← X
↑ ↑
[HEAD] [branch1]
Now the user is not in branch1 anymore, without having explicitly asked to check out another branch. Worse, the user is now outside any branch, and any new commit will just be dangling:
[HEAD]
↓
C
↙
A ← B ← X
↑
[branch1]
Hypothetically, if at this point, the user checks out another branch, then this dangling commit becomes fair game for Git's garbage collector.
You can get around this "limitation" by editing the .git/config on the destination server. Add the following to allow a git repository to be pushed to even if it is "checked out":
[receive]
denyCurrentBranch = warn
or
[receive]
denyCurrentBranch = false
The first will allow the push while warning of the possibility to mess up the branch, whereas the second will just quietly allow it.
This can be used to "deploy" code to a server which is not meant for editing. This is not the best approach, but a quick one for deploying code.
git config --local receive.denyCurrentBranch updateInstead
https://github.com/git/git/blob/v2.3.0/Documentation/config.txt#L2155
Use that on the server repository, and it also updates the working tree if no untracked overwrite would happen.
It was added in Git 2.3 as mentioned by VonC in the comments.
I've compiled Git 2.3 and gave it a try. Sample usage:
git init server
cd server
touch a
git add .
git commit -m 0
git config --local receive.denyCurrentBranch updateInstead
cd ..
git clone server local
cd local
touch b
git add .
git commit -m 1
git push origin master:master
cd ../server
ls
Output:
a
b
Yay, b got pushed!
I like the idea of still having a usable repository on the remote box, but instead of a dummy branch, I like to use:
git checkout --detach
This seems to be a very new feature of Git - I'm using git version 1.7.7.4.
I had the same issue. For me, I use Git push to move code to my servers. I never change the code on the server side, so this is safe.
In the repository, you are pushing to type:
git config receive.denyCurrentBranch ignore
This will allow you to change the repository while it's a working copy.
After you run a Git push, go to the remote machine and type this:
git checkout -f
This will make the changes you pushed be reflected in the working copy of the remote machine.
Please note, this isn't always safe if you make changes on in the working copy that you're pushing to.
You can recreate your server repository and push from your local branch master to the server master.
On your remote server:
mkdir myrepo.git
cd myrepo.git
git init --bare
OK, from your local branch:
git push origin master:master
What you probably did to cause this:
This kind of thing happens when you go to bang out a little program. You're about to change something which was already working, so you cast your level-3 spell of perpetual undoability:
machine1:~/proj1> git init
and you start adding/committing. But then, the project starts getting more involved and you want to work on it from another computer (like your home PC or laptop), so you do something like
machine2:~> git clone ssh://machine1/~/proj1
and it clones and everything looks good, and so you work on your code from machine2.
Then... you try to push your commits from machine2, and you get the warning message in the title.
The reason for this message is because the git repo you pulled from was kinda intended to be used just for that folder on machine1. You can clone from it just fine, but pushing can cause problems. The "proper" way to be managing the code in two different locations is with a "bare" repo, like has been suggested. A bare repo isn't designed to have any work being done in it, it is meant to coordinate the commits from multiple sources. This is why the top-rated answer suggests deleting all files/folders other than the .git folder after you git config --bool core.bare true.
Clarifying the top-rated answer: Many of the comments to that answer say something like "I didn't delete the non-.git files from the machine1 and I was still able to commit from machine2". That's right. However, those other files are completely "divorced" from the git repo, now. Go try git status in there and you should see something like "fatal: This operation must be run in a work tree". So, the suggestion to delete the files isn't so that the commit from machine2 will work; it's so that you don't get confused and think that git is still tracking those files. But, deleting the files is a problem if you still want to work on the files on machine1, isn't it?
So, what should you really do?
Depends upon how much you plan to still work on machine1 and machine2...
If you're done developing from machine1 and have moved all of your development to machine2... just do what the top-rated answer suggests: git config --bool core.bare true and then, optionally, delete all files/folders other than .git from that folder, since they're untracked and likely to cause confusion.
If your work on machine2 was just a one-time thing, and you don't need to continue development there... then don't bother with making a bare repo; just ftp/rsync/scp/etc. your files from machine*2* on top of the files on machine*1*, commit/push from machine*1*, and then delete the files off of machine*2*. Others have suggested creating a branch, but I think that's a little messy if you just want to merge some development you did on a one-time basis from another machine.
If you need to continue development on both machine1 and machine2... then you need to set things up properly. You need to convert your repo to a bare, then you need to make a clone of that on machine1 for you to work in. Probably the quickest way to do this is to do
machine1:~/proj1> git config --bool core.bare true
machine1:~/proj1> mv .git/ ../proj1.git
machine1:~/proj1> cd ..
machine1:~> rm -rf proj1
machine1:~> git clone proj1.git
machine1:~> cd proj1
Very important: because you've moved the location of the repo from proj1 to proj1.git, you need to update this in the .git/config file on machine2. After that, you can commit your changes from machine2. Lastly, I try to keep my bare repos in a central location, away from my work trees (i.e. don't put 'proj1.git' in the same parent folder as 'proj1'). I advise you to do likewise, but I wanted to keep the steps above as simple as possible.
With a few setup steps you can easily deploy changes to your website using a one-liner like
git push production
Which is nice and simple, and you don't have to log into the remote server and do a pull or anything. Note that this will work best if you don't use your production checkout as a working branch! (The OP was working within a slightly different context, and I think #Robert Gould's solution addressed it well. This solution is more appropriate for deployment to a remote server.)
First you need to set up a bare repository somewhere on your server, outside of your webroot.
mkdir mywebsite.git
cd mywebsite.git
git init --bare
Then create file hooks/post-receive:
#!/bin/sh
GIT_WORK_TREE=/path/to/webroot/of/mywebsite git checkout -f
And make the file executable:
chmod +x hooks/post-receive
On your local machine,
git remote add production git#myserver.com:mywebsite.git
git push production +master:refs/heads/master
All set! Now in the future you can use git push production to deploy your changes!
Credit for this solution goes to http://sebduggan.com/blog/deploy-your-website-changes-using-git/. Look there for a more detailed explanation of what's going on.
You should only be pushing to a bare repository. A bare repository is a repository that has no checked out branches. If you were to cd to a bare repository directory, you'd only see the contents of a .git directory.
Check your .git/config in the destination project:
$ cat .git/config
[core]
repositoryformatversion = 0
filemode = true
bare = false
logallrefupdates = true
[receive]
denyCurrentBranch = updateInstead
If the core. bare is false, you can set it to true:
$ git config core.bare true
and then in your local push to remote:
git push remote_repo // suppose the destination repo is remote_repo
it will success, in the remote_repo you can check git version.
$ git log -1
commit 0623b1b900ef7331b9184722a5381bbdd2d935ba
Author: aircraft < aircraft_xxx#126.com>
Date: Thu May 17 21:54:37 2018 +0800
and now you can not use git in your "workspace":
$ git status
fatal: This operation must be run in a work tree
you should set bare.bare back to false.
$ git config core.bare false
You have 3 options
Pull and push again:
git pull; git push
Push into different branch:
git push origin master:foo
and merge it on remote (either by git or pull-request)
git merge foo
Force it (not recommended unless you deliberately changed commits via rebase):
git push origin master -f
If still refused, disable denyCurrentBranch on remote repository:
git config receive.denyCurrentBranch ignore
In fact, set the remote to a non-checked out branch is sufficient. After you checked out your remote in a different branch, you can push.
I had the same problem using Git to synchronise repositories on my Android phone and laptop. The solution for me was to do a pull instead of a push, as #CharlesBailey suggested.
git push origin master on the Android repository fails for me with the same error messages that #hap497 got because of a push to a nonbare checkout of a repository + working-copy.
git pull droid master on the laptop repository and working-copy works for me. Of course, you need to have previously run something like git remote add droid /media/KINGSTON4GB/notes_repo/.
Older versions of Git used to allow pushes to the currently checked out branch of a non-bare repository.
It turns out this was a terribly confusing thing to allow. So they added the warning message you see, which is also terribly confusing.
If the first repository is just acting as a server then convert it to a bare repository as the other answers recommend and be done with it.
If however you need to have a shared branch between two repos that are both in use you can achieve it with the following setup
Repo1 - will act as the server and also be used for development
Repo2 - will be for development only
Setup Repo1 as follows
Create a branch to share work on.
git branch shared_branch
To be safe, you should also create a $(REPO).git/hooks/update that rejects any changes to anything other than shared_branch, because you don't want people mucking with your private branches.
repo1/.git/hooks (GIT_DIR!)$ cat update
#!/bin/sh
refname="$1"
oldrev="$2"
newrev="$3"
if [ "${refname}" != "refs/heads/shared_branch" ]
then
echo "You can only push changes to shared_branch, you cannot push to ${refname}"
exit 1
fi
Now create a local branch in repo1 where you will do your actual work.
git checkout -b my_work --track shared_branch
Branch my_work set up to track local branch shared_branch.
Switched to a new branch 'my_work'
(may need to git config --global push.default upstream in order for git push to work)
Now you can create repo2 with
git clone path/to/repo1 repo2
git checkout shared_branch
At this point you have both repo1 and repo2 setup to work on local branches that push and pull from shared_branch in repo1, without needing to worry about that error message or having the working directory get out of sync in repo1. Whatever normal workflow you use should work.
OK, in case you want a normal remote repository, then create an extra branch and check it out. Push it into one branch (which is not checked out) and merge it with one which is currently active later after pushing from locally.
For example, on a remote server:
git branch dev
git checkout dev
On the local setup:
git push
On remote server:
git merge dev
Here is one test you can do to see how the bare server stuff work:
Imagine you have a workstation and a server with live site hosted on it, and you want to update this site from time to time (this also applies to a situation where two developers are sending their work back and forth through a bare middleman).
Initialization
Create some directory on your local computer and cd into it, then execute these commands:
# initialization
git init --bare server/.git
git clone server content
git clone server local
First you create a bare server directory (notice the .git at the end). This directory will serve as a container for your repository files only.
Then clone your server repository to a newly created content directory. This is your live/production directory which will be served by your server software.
The first two directories resides on your server, the third one is a local directory on your workstation.
Workflow
Now here is the basic workflow:
Enter the local directory, create some files and commit them. Finally push them to the server:
# create crazy stuff
git commit -av
git push origin master
Now enter the content directory and update the server's content:
git pull
Repeat 1-2. Here content may be another developer that can push to the server too, and local as you may pull from him.
Using this to push it to the remote upstream branch solved this issue for me:
git push <remote> master:origin/master
The remote had no access to the upstream repo so this was a good way to get the latest changes into that remote
I had to re-run git --init in an existing bare repository, and this had created a .git directory inside the bare repository tree - I realized that after typing git status there. I deleted that and everything was fine again :)
(All these answers are great, but in my case it was something completely different (as far as I can see), as described.)
I'm sure most people viewing this question will stop at the first two huge answers, but I'd still like to offer my solution.
I had an Eclipse + EGit web project setup when encountering the described error. What helped me was simply using the GitHub app, which seemed to magically resolve the issue. While EGit would always refuse the push, the GitHub desktop app would just shrug its shoulders and push my changes. Maybe it handles the multi-login-situation more gracefully.
An article I found that might be useful to others is Git in 5 minutes.
I had an Xcode project under Git version control that I wanted to push up to a Virtual Distributed Ethernet (VDE) I have in a DC. The VDE runs Centos 5.
None of the articles I read about Git talked about bare repositories. It all sounded so simple until I tried what I thought should be easy coming from an SVN background.
The suggestions here to make the remote repository bare worked. Even better for my requirements was to clone the Xcode project to projectname.git, copy that to the remote server; then pushes magically worked. The next step will be getting Xcode to push without errors about commits, but for now I'm okay doing it from Terminal.
So:
cd /tmp (or another other directory on your system)<br/>
git clone --bare /xcode-project-directory projectname.git<br/>
scp -r projectname.git sshusername#remotehost.com:repos/<br/>
To push changes from your Xcode project after you've committed in Xcode:
cd /xcode-project-directory<br/>
git push sshusername#remotehost.com:repos/projectname.git<br/>
I'm certain there is a smoother more sophisticated way of doing the above, but at a minimum this works. Just so everything is clear, here are some clarifications:
/xcode-project-directory is the directory your xcode project is stored in. It's probably /Users/Your_Name/Documents/Project_Name.
projectname is literally the name of the project, but it can be anything you care to call it. Git doesn't care, you will.
To use scp you need to have a user account on the remote server that's allowed SSH access. Anyone running their own server will have this. If you're using shared hosting or the like, you might be out of luck.
remotehost.com is the name of your remote host. You could as easily use its IP address. Just for further clarity I'm using Gitosis on the remote host with SSH keys, so I'm not prompted for passwords when I push. The article Hosting Git Repositories, the Easy (and Secure) Way tells you how to set all that up.
The best way to do this is:
mkdir ..../remote
cd ..../remote
git clone --bare .../currentrepo/
This will clone the repository, but it won't make any working copies in .../remote. If you look at the remote, you'll see one directory created, called currentrepo.git, which is probably what you want.
Then from your local Git repository:
git remote add remoterepo ..../remote/currentrepo.git
After you make changes, you can:
git push remoterepo master
I just ran into this problem with a deployment git repository on Heroku.
I don't know why Heroku has a non-bare repository on their side, but as a workaround I was able to reset the remote repository, and reupload.
You shouldn't use Heroku's copy of your repository as your only git repository for collaboration, but just in case, I'll say clearly: Do not do this unless you are sure you have a full copy of your repository stored securely somewhere other than Heroku. Doing a reset will delete the repository contents.
To reset:
Install the Heroku toolbelt (which contains the command line client) if you haven't already.
Install the heroku-repo plugin if you haven't already.
heroku plugins:install https://github.com/heroku/heroku-repo.git
Do the reset, which deletes the repository and creates a new, empty one
heroku repo:reset
Push to your Heroku remote as you normally would; it will reupload everything.
You will need to change the config file on the remote server once you have created empty(bare) repository, say
root#development:/home/git/repository/my-project# cat config
there you will see
[core]
repositoryformatversion = 0
filemode = true
bare = false
logallrefupdates = true
You will make this bare to false to true and I removed logallrefupdates = true (not sure of its use!)
to
[core]
repositoryformatversion = 0
filemode = true
bare = true
You may test following
$ git remote show origin
* remote origin
Fetch URL: my-portal#development:/home/XYZ/repository/XYZ
Push URL: my-portal#development:/home/XYZ/repository/XYZ
HEAD branch: (unknown)
This HEAD branch: (unknown) will be shown if you are unable to PUSH. So if the HEAD branch is unknow, you should change bare to true and after push successful you can reuse the
git remote show origin
and you will see
HEAD branch: master
For me working solution is:
ON REMOTE:
git checkout -b some_tmp_name
ON LOCAL:
git push
ON REMOTE:
git checkout master
git branch -d some_tmp_name
But this is not the real solution it's just workaround.
Just in case someone finds it useful. For me it was a git server permissions issue. I checked out the project from the beggining and push a simple file and then I got the "Push rejected: Push to origin/master was rejected"
Let me add my 50 cents, because the most voted answer https://stackoverflow.com/a/3251126/3455918 suggests a converting of remote repw to a bare repository, and what if it's not what I want?
In the end I have to have the same code on the remote machine but not just blobs of bytes somewhere in .git limbo.
The second-voted (as of this writing) solution https://stackoverflow.com/a/2933656/3455918 does the job but after testing this out I ended up having to constantly switch between branches on the remote machine to "free" the branch I want to push from my local machine to.
This worked for me:
Another solution that worked for me so far is not mine, credit is given to a user #kxr who commented on the first solution.
On the remote machine you have to make this command in the repo directory.
git config receive.denyCurrentBranch updateInstead
After this you are done!
Obviously, there might be some drawbacks of this solution but for a simple task of synchronizing your local machine code to your remote repo it's probably good enough.
I would be grateful if someone explaines in comments why it's totally fine to create a brand new repo on github, link your local folder to it and start doing git push origin master without errors.
But trying to make this same thing with the repo on the remote server yields and error:
! [remote rejected] master -> master (branch is currently checked out)
With Git, two regular (non-bare) repositories can't push/pull files back and forth directly. There must be an intermediary bare repository. Apparently, it's sort of like a married couple who have a kid, and the couple is getting divorced. The parents won't talk to each other, but they will communicate through the kid.
So, you have one repository, you clone this repository to a bare repository, and then you clone that to a third. The first and the third can exchange information via the second repository, the bare one. I guess this makes sense, as you wouldn't want someone able to check stuff into your repository without your consent, as that could cause merge conflicts & the like.
So, here's an example:
On PC, in ~/workspace
git init
echo "line 1" > afile.txt
git add .
git commit -m ‘initial import’
git clone --bare . ../remote-repository.git
git remote add origin ../remote-repository.git
git push --set-upstream origin master
On laptop, in ~/workspace (do not do git init, etc.)
git clone //LJZ-DELLPC/remote-repository.git/ .
// Then make various commits, and push them:
echo "line 2" > afile.txt
git add afile.txt
git commit -m 'added line 2'
git push
Then back on PC, in ~/workspace
git pull
// Then make various commits, and push them:
git push
On laptop
git pull
and so forth..
Here's an absolute concrete example all on one machine, copied straight from the command window, so that we'll know that no steps were left out, that it really did work, etc:
lylez#LJZ-DELLPC ~
$ cd gitdir
/home/lylez/gitdir
lylez#LJZ-DELLPC ~/gitdir
$ ls
lylez#LJZ-DELLPC ~/gitdir
$ mkdir repo1
lylez#LJZ-DELLPC ~/gitdir
$ cd repo1
/home/lylez/gitdir/repo1
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git init
Initialized empty Git repository in /home/lylez/gitdir/repo1/.git/
lylez#LJZ-DELLPC ~/gitdir/repo1
$ echo "line 1" > afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git add afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git commit -m 'initial import'
[master (root-commit) f407e12] initial import
1 file changed, 1 insertion(+)
create mode 100644 afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git clone --bar . ../repo1-bare-clone
Cloning into bare repository '../repo1-bare-clone'...
done.
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git remote add origin ../repo1-bare-clone
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git push --set-upstream origin master
Branch master set up to track remote branch master from origin.
Everything up-to-date
lylez#LJZ-DELLPC ~/gitdir/repo1
$ cd ..
lylez#LJZ-DELLPC ~/gitdir
$ ls
repo1 repo1-bare-clone
lylez#LJZ-DELLPC ~/gitdir
$ mkdir repo1-remote
lylez#LJZ-DELLPC ~/gitdir
$ cd repo1-remote
/home/lylez/gitdir/repo1-remote
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ git clone ../repo1-bare-clone .
Cloning into '.'...
done.
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ ls
afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ cat afile.txt
line 1
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ echo "line 2" >> afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ git add afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ git commit -m 'added line 2'
[master 5ad31e0] added line 2
1 file changed, 1 insertion(+)
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ git push
Counting objects: 3, done.
Writing objects: 100% (3/3), 260 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To /home/lylez/gitdir/repo1-remote/../repo1-bare-clone
f407e12..5ad31e0 master -> master
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ cd ../repo1
lylez#LJZ-DELLPC ~/gitdir/repo1
$ ls
afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1
$ cat afile.txt
line 1
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git pull
remote: Counting objects: 3, done.
remote: Total 3 (delta 0), reused 0 (delta 0)
Unpacking objects: 100% (3/3), done.
From ../repo1-bare-clone
f407e12..5ad31e0 master -> origin/master
Updating f407e12..5ad31e0
Fast-forward
afile.txt | 1 +
1 file changed, 1 insertion(+)
lylez#LJZ-DELLPC ~/gitdir/repo1
$ cat afile.txt
line 1
line 2
lylez#LJZ-DELLPC ~/gitdir/repo1
$ echo "line 3" >> afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git add afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git commit -m 'added line 3'
[master 3fa569e] added line 3
1 file changed, 1 insertion(+)
lylez#LJZ-DELLPC ~/gitdir/repo1
$ git push
Counting objects: 3, done.
Writing objects: 100% (3/3), 265 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To ../repo1-bare-clone
5ad31e0..3fa569e master -> master
lylez#LJZ-DELLPC ~/gitdir/repo1
$ cd ../repo1-remote/
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ ls
afile.txt
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ cat afile.txt
line 1
line 2
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ git pull
remote: Counting objects: 3, done.
remote: Total 3 (delta 0), reused 0 (delta 0)
Unpacking objects: 100% (3/3), done.
From /home/lylez/gitdir/repo1-remote/../repo1-bare-clone
5ad31e0..3fa569e master -> origin/master
Updating 5ad31e0..3fa569e
Fast-forward
afile.txt | 1 +
1 file changed, 1 insertion(+)
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ cat afile.txt
line 1
line 2
line 3
lylez#LJZ-DELLPC ~/gitdir/repo1-remote
$ git --version
git version 2.1.1
lylez#LJZ-DELLPC ~/gitdir/repo1-remote

`ssh -vT git#github.com` works fine, and agent is in github ssh keys. Where is the issue?

I just bought a new machine, and I'm working on a new github repo. I clone it into my machine using
git clone git#github.com:<username>/<exact-repo-name>.git
and it clones fine:
Cloning into '<exact-repo-name>'...
remote: Counting objects: ###, done.
remote: Total ### (delta 0), reused 0 (delta 0), pack-reused ###
Receiving objects: 100% (###/###), ### KiB | 0 bytes/s, done.
Resolving deltas: 100% (###/###), done.
Checking connectivity... done.
And, I add all of the remote branches locally by doing:
for remote in git branch -r; do git checkout -b $remote; done
Then, when I try to pull from any of the branches, using
git pull origin/<branch-name>
I get the ever-so-common error:
origin/<branch-name> does not appear to be a git repository
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
So, I go through all of the steps:
ssh -vT git#github.com
ssh-add -l
eval "$(ssh-agent -s)"
These all succeed, and I check the output of ssh-add -l and I see that it is in the list ssh keys on my github account. I go into Settings -> ssh keys, and I see the agent there.
Are there certain user permissions that are on top of those for ssh?
I agree with #Felix that this most likely is not an SSH problem, though it might be masquerading as this. Instead, I think you have a problem with your path. You can try running git clone like this:
git clone https://username#github.com/username/exact-repo-name.git
Here the username is your GitHub username. Git will prompt you for a password so you don't have to enter it as plain text. Please read this SO article for more information.
It's probably not an ssh issue, as an ssh problem would normally result in a message like
fatal: The remote end hung up unexpectedly
Most likely it's a path problem: either you have an extra slash or space in the remote path (or if there's supposed to be a space, you're missing quotation marks in your command line), or some letter is the wrong case. Double-check the rest of the URL. It could also be exactly what it says, a permissions problem -- are you sure you're connecting as the right user for this repository?
Edit: from your added details, it looks like you're just getting the syntax of the pull command mixed up. Does it work if you do this?:
git checkout <branch-name>
git pull # Edit: don't do this without reading all of 'git help pull'
? Also, does git fetch --all work? (git pull is just git fetch followed by git merge.)
Further edit: I can reproduce your error; it is a command syntax problem. Here are more examples:
"source" is a git repository in a local folder; I clone it into a folder called "dest":
$ git clone source dest
$ cd dest
Now I do the git branch command in your for loop:
$ git branch -r
origin/HEAD -> origin/master
origin/branch1
origin/branch2
origin/master
I would expect that first line to cause problems, since that would result in these commands being run in your for loop:
git checkout -b "origin/HEAD"
git checkout -b "->"
...
(Note that your example is missing backticks around `git branch -r`, so if what you posted is literally what you're running, you'll end up with branches called "git", "branch", and "-r", which would really not be what you want... if you had trouble putting backticks into inline code blocks, see https://meta.stackexchange.com/questions/55437/how-can-the-backtick-character-be-included-in-code)
Then if I try your pull command, I get the same error as you:
$ git pull origin/branch1
fatal: 'origin/branch1' does not appear to be a git repository
fatal: The remote end hung up unexpectedly
This is because git pull takes the remote repository name (origin) and the remote branch name (branch1) as two separate parameters, separated by a space. So this works:
$ git pull origin branch1
From /tmp/source
* branch branch1 -> FETCH_HEAD
Already up-to-date.
But, that's probably not quite what you want, because it sounds like you wanted to create a bunch of local branches to track the same named branches on origin (e.g. you want a local branch named "branch1" that tracks "origin/branch1"). Your local branch creation commands didn't include setting up tracking, so what you've actually got is a local branch called "origin/branch1" and a branch on remote repository "origin" also called "branch1", i.e. after running your for loop, the output of git branch -a is:
$ git branch -a
master
origin/HEAD
origin/branch1
* origin/branch2
origin/master
remotes/origin/HEAD -> origin/master
remotes/origin/branch1
remotes/origin/branch2
remotes/origin/master
...So there are two branches called "origin/branch1", and the only thing that differentiates them is that in one case, the repository is your local one and the branch's literal full name is "origin/branch1", and in the other case, the repository is the remote one (named origin) and the branch's literal full name is "branch1", which is notated as "origin/branch1" -- this will probably be very confusing to work with (and in some commands, git will complain and say, "origin/branch1 is ambiguous" and you'll have problems).
Note also that each of the new branches your for loop created is actually just a copy of master (or whatever the default/selected branch was on origin), because you didn't specify a remote branch for them to start from. That is, in your clone command, your local repository was set up with one branch selected (probably master). You then told git "make new branch from where I am now" for each line in your for loop, so each of those new branches, despite having all the different names of the branches on remote, are references to the first branch selected with your clone. This is probably not what you wanted.
I think what you actually wanted was this command, run for each remote branch:
$ git checkout --track origin/branch1
Branch branch1 set up to track remote branch branch1 from origin.
Switched to a new branch 'branch1'
Actually, if you've just done a fresh clone, a git checkout branch1 [without the -b] will have the same effect I think -- since there is no local branch called branch1, git will look for one in the repository you cloned from and set up tracking if it finds one.
...So I guess what this whole post boils down to is:
Leave out the -b in your initial checkout commands
Use a space instead of a slash in your pull command
:)
See https://git-scm.com/book/en/v2/Git-Branching-Remote-Branches and the output of git help pull for more about remote tracking and pulling; some of it is a bit subtle (even more so than all the caveats I mentioned :) ).

Resources