Related
I want to downgrade my version using npm.
The current version is 16.13.1. I want to downgrade this to 12.0.1. Can anyone tell me how to do it?
Thanks!
use node version manager nvm, you can switch any node version that you want.
More details
https://github.com/nvm-sh/nvm/blob/master/README.md
https://www.npmjs.com/package/nvm
nvm install 14.15.5
nvm use 14.15.5
Use below command for all installed node versions
nvm list
You can accomplish that with Node Version Manager. Install nvm first, and in a terminal:
nvm install 12.0.1
Then
nvm use 12.0.1
You can use: npm install -g node#version.
So for example in your case it would be -> sudo npm install -g node#12.0.1
might have to force it with --force at the end.
You could also install the node npm module to change (upgrade or downgrade) the NodeJS version for the specific project.
Try the n package from npm. Find it here.
npm install -g n
n 10.16.0
n lts
Simply execute n <version> to download and install a version of Node.js. If has already been downloaded, n will install from its cache.
first check your node version
node -v
sudo npm install -g n
sudo n stable
sudo n 14.6.0 (you can chnage version here as you want to move)
npm install (jst run after all)
now you can check the node and npm version by
node -v
npm -v
Clearing the local installation of node, to find out where is and delete
where node
Install nvm
For Windows
For others
Show all the versions
nvm ls available
Install what you want
nvm install 12.0.1
nvm use 12.0.1
Check node version
node -v
I have tried several ways and this works, hope it helps.
I finally found a simple solution.
Uninstall the current Version
Download the version you want.
It works fine for me.
Thanks!
This question's answers are a community effort. Edit existing answers to improve this post. It is not currently accepting new answers or interactions.
I did the following to update my npm:
npm update npm -g
But I have no idea how to update Node.js. Any suggestions? (I'm using Node.js 0.4.1 and want to update to Node.js 0.6.1.)
To upgrade Node you may first want to see which version of Node.js you are currently using:
node --version
Find out which versions of Node.js you may have installed and which one of those you're currently using:
nvm ls
List all versions of Node.js available for installation:
nvm ls-remote
Apparently for Windows the command would be rather like this:
nvm ls available
Assuming you would pick Node.js v8.1.0 for installation you'd type the following to install that version:
nvm install 8.1.0
You are then free to choose between installed versions of Node.js. So if you would need to use an older version like v4.2.0 you would set it as the active version like this:
nvm use 4.2
That should be all.
In 2013 I used the following instructions to upgrade from Node.js version 0.10.6 to 0.10.21 on a Mac, for more recent instructions see above.
Update from 2017: Please mind, Mr. Walsh himself recommended to update Node.js just using nvm instead.
Clear NPM's cache:
sudo npm cache clean -f
Install a little helper called 'n'
sudo npm install -g n
Install latest stable Node.js version
sudo n stable
Alternatively pick a specific version and install like this:
sudo n 0.8.20
For production environments you might want to pay attention to version numbering and be picky about odd/even numbers.
Credits
General procedure: D.Walsh
Stable/unstable versions: P.Teixeira
Use Node Version Manager (NVM)
It's a Bash script that lets you download and manage different versions of node. Full source code is here.
There is a separate project for nvm for Windows: github.com/coreybutler/nvm-windows
Below are the full steps to use NVM for multiple version of node on windows
download nvm-setup.zip extract and install it.
execute command nvm list available from cmd or gitbash or powershell, this will list all available version of node
use command nvm install version e.g. nvm install 12.14.0 to install on the machine
last once installed use nvm use version to use newer version e.g. nvm use 12.14.0
Any OS (including Windows, Mac & Linux)
Updated October 2022
Just go to the official Node.js site (nodejs.org), download and execute the installer program.
It will take care of everything and with a few clicks of 'Next' you'll get the latest Node.js version running on your machine. Since 2020 it's the recommended way to update NodeJS. It's the easiest and least frustrating solution.
Pro tips
NodeJS installation includes NPM (Node package manager).
To check your NPM version use npm version or node --version.
If you prefer CLI, to update NPM use npm install -g npm and then npm install -g node.
For more details, see the docs for install command.
Keep an eye on NodeJS blog - Vulnerabilities so you don't miss important security releases. Keep your NodeJS up-to-date.
Operating systems supported by Node.js:
Windows, Linux, MacOS, IBM AIX.
For Docker users, here's the official Node.js image.
For more information on installing Node.js on a variety of less-common operating systems, see this page (there's even Node for Android!).
Troubleshooting for Windows:
If anyone gets file error 2502/2503 like myself during install, run
the .msi via Administrator command prompt with command msiexec /package [node msi]
If my answer is helpful, don't forget to upvote it
(here is the original answer by Anmol Saraf, upvote it too)
If you have Homebrew installed (only for macOS):
$ brew upgrade node
2021: Just go to nodejs.org and use the latest installer.
That's it folks. It used to be more complex and people used different kinds of packages and strategies to manage it. But things have changed for the better.
Works for all platforms (Windows, Mac & Linux).
First update npm,
npm install -g npm stable
Then update node,
npm install -g node or npm install -g n
check after version installation,
node --version or node -v
On Windows you can use Chocolatey to install and update Node.js (and lots of other packages).
Install Node
cinst nodejs.install
Update Node
cup nodejs.install
Note: You will need to install Chocolatey before you can use cinst and cup.
To upgrade node to the latest version or to a specific version you can do the following:
sudo npm install n -g
sudo n 0.10.18 // This will give you the specific version
For the latest stable version:
sudo n stable
For the latest LTS version(Tested on Mac)
sudo n lts
To control your version of Node.js, you can try n. I found it very straightforward and useful.
n is a Node.js binary management, no subshells, no profile setup, no convoluted API, just simple.
npm install -g n
n 0.6.19 will install Node.js v0.6.19.
Short answer:
Go to this page: Download | Node.js
Download the installer for your platform, then install it.
I had the same problem, when I saw that my Node.js installation is outdated.
These few lines will handle everything (for Ubuntu):
sudo npm cache clean -f
sudo npm install -g n
sudo n stable
After this node -v will return you the latest available version.
On CentOS 7 you can do the following:
sudo npm cache clean -f
sudo npm install -g n
sudo n stable
sudo ln -sf /usr/local/n/versions/node/5.4.1/bin/node /usr/bin/node
node –v (Should show updated version now)
npm rebuild node-sass (Optional: if you use this)
Note: The symlink is required to link your node binary with the latest Node.js installed binary file.
For OS X, I had v5.4.1 and needed the latest version 6 so I went to the Node.js homepage and clicked on one of the links below:
I then followed the installer and then I magically had the latest version of Node.js and npm.
For macOS in 2018+
(as ALL of the solutions above are failing for me):
Simply go to the official nodejs site, download the official nodejs package and install it by double clicking. It's the most simple, safe and always-working thing you can do.
You may use nvm.
Check what is the latest version at http://nodejs.org/ (e.g. v0.10.26)
Run nvm install v0.10.26
Done.
You can choose which version to run:
nvm ls list the available versions and tells you which version you are using now.
nvm use VERSION change the current node to the requested version.
nvm alias default VERSION set the default version. The next time you source nvm.sh, this will be the version loaded (note that it doesn't change the version in use right now, run nvm use for that).
Some Linux distributions such as Arch Linux have Node.js in their package repositories. On such systems it is better to use a standard package update procedure, such as pacman -Suy or analogous apt-get or yum commands.
As of now (Nov 2016) EPEL7 offers a pretty recent version of Node.js (6.9.1 which is an up-to-date LTS version offered on the Node.js home page). So on CentOS 7 and derivatives you can just add EPEL repository by yum install epel-release and yum install nodejs.
CentOS 6/EPEL6 has 0.10.x which isn't supported upstream since Oct 2016.
Today I ran on a Windows Git Bash:
$ npm i node -g
and got the following output:
> node#10.6.0 preinstall C:\Users\X\AppData\Roaming\npm\node_modules\node
> node installArchSpecificPackage
+ node-win-x64#10.6.0
added 1 package and audited 1 package in 23.368s
found 0 vulnerabilities
C:\Users\X\AppData\Roaming\npm\node -> C:\Users\X\AppData\Roaming\npm\node_modules\node\bin\node
+ node#10.6.0
added 2 packages from 1 contributor in 26.089s
Read more about it at https://www.npmjs.com/package/node.
The easy way to update node and npm :
npm install -g npm#latest
download the latest version of node js and update /install
$ npm install -g npm stable
worked for me to update npm
Install nvm(cURL)
$ curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.31.1/install.sh | bash
OR with Wget
$ wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.33.1/install.sh | bash
Display list of installed versions
$ nvm ls
Display list of versions that are available to install
$ nvm ls-remote
Install your preferred version
$ nvm install v7.5.0
Set this version as the default
$ nvm alias default v7.5.0
For Ubuntu:
sudo apt-get install -y curl
curl -sL https://deb.nodesource.com/setup_0.12 | sudo bash -
sudo apt-get install -y nodejs
Source: https://askubuntu.com/questions/426750/how-can-i-update-my-nodejs-to-the-latest-version
You may use Chocolatey on Windows. It's very easy to use and useful for keeping you updated with other applications too.
Also, you can just simply download the latest version from https://nodejs.org and install it.
According to Nodejs Official Page, you can install&update new node version on windows using Chocolatey or Scoop
Using(Chocolatey):
cinst nodejs
# or for full install with npm
cinst nodejs.install
Using(Scoop):
scoop install nodejs
Also you can download the Windows Installer directly from the nodejs.org web site
As some of you already said, the easiest way is to update Node.js through the Node.js package manager, npm. If you are a Linux (Debian-based in my case) user I would suggest to add these lines to your .bashrc file (in home directory):
function nodejsupdate() {
ARGC=$#
version=latest
if [ $ARGC != 0 ]; then
version=$1
fi
sudo npm cache clean -f
sudo npm install -g n
sudo n $version
}
Restart your terminal after saving and write nodejsupdate to update to the latest version of Node.js or nodejsupdate v6.0.0 (for example) to update to a specific version of Node.js.
BONUS: Update npm (add these lines to .bashrc)
function npmupdate() {
sudo npm i npm -g
}
After restarting the terminal write npmupdate to update your node package manager to the latest version.
Now you can update Node.js and npm through your terminal (easier).
In windows download the node executable file from the website and install it. this worked for me.
All you need to version update of Node.js:
$ brew install node
If you don't have Homebrew; please go http://brew.sh/.
Just install the new version over the current folder. I upgraded mine from v4.x to v6.10 on Windows.
npm clean cache - you forget to clean ur cache
npm update -g
This works on mine Windows, I hope it will also work for you :D
If you want to update Node.js, just try
npm update
from your Windows cmd prompt.
Else if you want to update any specific package try
npm update <package_name>
Example:
npm update phonegap
open cmd and type
npm i -g npm
Trying but failing; also open to manual install if someone can help.
FYI, end goal is to install mobius-network-js to begin dev on a Mobius DApp
To install node v9.0.0, use
nvm install 9.0.0
Then check the version
node -v
It should be v9.0.0
If there is a version mismatch, use
nvm use 9.0.0
The output should be
Now using node v9.0.0 (npm v5.5.1)
Made sure, you have already installed the nvm
You can also check the Documentation for details.
You can install specific version on node using nvm via
nvm install <node-version> - nvm documentation
if you want to install node v9. you can run nvm install v9 and this will automatically install
the node v9.x.x
you can also set it as the default version via the nvm use command.
Open git bash and and try the following commands:
nvm install [version_needed]
nvm use [version_needed]
Instead of [version_needed] write down the relevant version of nodejs:
https://nodejs.org/en/download/releases/
n library is best alternative of nvm and its really easy to use .
https://www.npmjs.com/package/n
installation step
step 1 -
npm i n -g
step 2 -
n node-version
ex - n 9 or n stable to download latest stable version of node
I have Node version v6.10.0 with Node Express 4.14.1. I want to upgrade Node version to 7.6 or 8 to make use of async await features.
However, I'm not sure if it is as simple as update node with the command line or if there is something I should be aware of before migrating.
sudo npm cache clean -f
sudo npm install -g n
sudo n stable
I have not found any migration guide on the site, github or whatsoever Internet.
Is it as simple as that as running a terminal instruction and done?
Try Using nvm,using nvm,We can easily switch between different versions of node js.
To Download nvm
curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.33.11/install.sh | bash
Install a Particular Version Of Node
nvm install version
Use a Node Version
nvm use version
This question's answers are a community effort. Edit existing answers to improve this post. It is not currently accepting new answers or interactions.
I did the following to update my npm:
npm update npm -g
But I have no idea how to update Node.js. Any suggestions? (I'm using Node.js 0.4.1 and want to update to Node.js 0.6.1.)
To upgrade Node you may first want to see which version of Node.js you are currently using:
node --version
Find out which versions of Node.js you may have installed and which one of those you're currently using:
nvm ls
List all versions of Node.js available for installation:
nvm ls-remote
Apparently for Windows the command would be rather like this:
nvm ls available
Assuming you would pick Node.js v8.1.0 for installation you'd type the following to install that version:
nvm install 8.1.0
You are then free to choose between installed versions of Node.js. So if you would need to use an older version like v4.2.0 you would set it as the active version like this:
nvm use 4.2
That should be all.
In 2013 I used the following instructions to upgrade from Node.js version 0.10.6 to 0.10.21 on a Mac, for more recent instructions see above.
Update from 2017: Please mind, Mr. Walsh himself recommended to update Node.js just using nvm instead.
Clear NPM's cache:
sudo npm cache clean -f
Install a little helper called 'n'
sudo npm install -g n
Install latest stable Node.js version
sudo n stable
Alternatively pick a specific version and install like this:
sudo n 0.8.20
For production environments you might want to pay attention to version numbering and be picky about odd/even numbers.
Credits
General procedure: D.Walsh
Stable/unstable versions: P.Teixeira
Use Node Version Manager (NVM)
It's a Bash script that lets you download and manage different versions of node. Full source code is here.
There is a separate project for nvm for Windows: github.com/coreybutler/nvm-windows
Below are the full steps to use NVM for multiple version of node on windows
download nvm-setup.zip extract and install it.
execute command nvm list available from cmd or gitbash or powershell, this will list all available version of node
use command nvm install version e.g. nvm install 12.14.0 to install on the machine
last once installed use nvm use version to use newer version e.g. nvm use 12.14.0
Any OS (including Windows, Mac & Linux)
Updated October 2022
Just go to the official Node.js site (nodejs.org), download and execute the installer program.
It will take care of everything and with a few clicks of 'Next' you'll get the latest Node.js version running on your machine. Since 2020 it's the recommended way to update NodeJS. It's the easiest and least frustrating solution.
Pro tips
NodeJS installation includes NPM (Node package manager).
To check your NPM version use npm version or node --version.
If you prefer CLI, to update NPM use npm install -g npm and then npm install -g node.
For more details, see the docs for install command.
Keep an eye on NodeJS blog - Vulnerabilities so you don't miss important security releases. Keep your NodeJS up-to-date.
Operating systems supported by Node.js:
Windows, Linux, MacOS, IBM AIX.
For Docker users, here's the official Node.js image.
For more information on installing Node.js on a variety of less-common operating systems, see this page (there's even Node for Android!).
Troubleshooting for Windows:
If anyone gets file error 2502/2503 like myself during install, run
the .msi via Administrator command prompt with command msiexec /package [node msi]
If my answer is helpful, don't forget to upvote it
(here is the original answer by Anmol Saraf, upvote it too)
If you have Homebrew installed (only for macOS):
$ brew upgrade node
2021: Just go to nodejs.org and use the latest installer.
That's it folks. It used to be more complex and people used different kinds of packages and strategies to manage it. But things have changed for the better.
Works for all platforms (Windows, Mac & Linux).
First update npm,
npm install -g npm stable
Then update node,
npm install -g node or npm install -g n
check after version installation,
node --version or node -v
On Windows you can use Chocolatey to install and update Node.js (and lots of other packages).
Install Node
cinst nodejs.install
Update Node
cup nodejs.install
Note: You will need to install Chocolatey before you can use cinst and cup.
To upgrade node to the latest version or to a specific version you can do the following:
sudo npm install n -g
sudo n 0.10.18 // This will give you the specific version
For the latest stable version:
sudo n stable
For the latest LTS version(Tested on Mac)
sudo n lts
To control your version of Node.js, you can try n. I found it very straightforward and useful.
n is a Node.js binary management, no subshells, no profile setup, no convoluted API, just simple.
npm install -g n
n 0.6.19 will install Node.js v0.6.19.
Short answer:
Go to this page: Download | Node.js
Download the installer for your platform, then install it.
I had the same problem, when I saw that my Node.js installation is outdated.
These few lines will handle everything (for Ubuntu):
sudo npm cache clean -f
sudo npm install -g n
sudo n stable
After this node -v will return you the latest available version.
On CentOS 7 you can do the following:
sudo npm cache clean -f
sudo npm install -g n
sudo n stable
sudo ln -sf /usr/local/n/versions/node/5.4.1/bin/node /usr/bin/node
node –v (Should show updated version now)
npm rebuild node-sass (Optional: if you use this)
Note: The symlink is required to link your node binary with the latest Node.js installed binary file.
For OS X, I had v5.4.1 and needed the latest version 6 so I went to the Node.js homepage and clicked on one of the links below:
I then followed the installer and then I magically had the latest version of Node.js and npm.
For macOS in 2018+
(as ALL of the solutions above are failing for me):
Simply go to the official nodejs site, download the official nodejs package and install it by double clicking. It's the most simple, safe and always-working thing you can do.
You may use nvm.
Check what is the latest version at http://nodejs.org/ (e.g. v0.10.26)
Run nvm install v0.10.26
Done.
You can choose which version to run:
nvm ls list the available versions and tells you which version you are using now.
nvm use VERSION change the current node to the requested version.
nvm alias default VERSION set the default version. The next time you source nvm.sh, this will be the version loaded (note that it doesn't change the version in use right now, run nvm use for that).
Some Linux distributions such as Arch Linux have Node.js in their package repositories. On such systems it is better to use a standard package update procedure, such as pacman -Suy or analogous apt-get or yum commands.
As of now (Nov 2016) EPEL7 offers a pretty recent version of Node.js (6.9.1 which is an up-to-date LTS version offered on the Node.js home page). So on CentOS 7 and derivatives you can just add EPEL repository by yum install epel-release and yum install nodejs.
CentOS 6/EPEL6 has 0.10.x which isn't supported upstream since Oct 2016.
Today I ran on a Windows Git Bash:
$ npm i node -g
and got the following output:
> node#10.6.0 preinstall C:\Users\X\AppData\Roaming\npm\node_modules\node
> node installArchSpecificPackage
+ node-win-x64#10.6.0
added 1 package and audited 1 package in 23.368s
found 0 vulnerabilities
C:\Users\X\AppData\Roaming\npm\node -> C:\Users\X\AppData\Roaming\npm\node_modules\node\bin\node
+ node#10.6.0
added 2 packages from 1 contributor in 26.089s
Read more about it at https://www.npmjs.com/package/node.
The easy way to update node and npm :
npm install -g npm#latest
download the latest version of node js and update /install
$ npm install -g npm stable
worked for me to update npm
Install nvm(cURL)
$ curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.31.1/install.sh | bash
OR with Wget
$ wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.33.1/install.sh | bash
Display list of installed versions
$ nvm ls
Display list of versions that are available to install
$ nvm ls-remote
Install your preferred version
$ nvm install v7.5.0
Set this version as the default
$ nvm alias default v7.5.0
For Ubuntu:
sudo apt-get install -y curl
curl -sL https://deb.nodesource.com/setup_0.12 | sudo bash -
sudo apt-get install -y nodejs
Source: https://askubuntu.com/questions/426750/how-can-i-update-my-nodejs-to-the-latest-version
You may use Chocolatey on Windows. It's very easy to use and useful for keeping you updated with other applications too.
Also, you can just simply download the latest version from https://nodejs.org and install it.
According to Nodejs Official Page, you can install&update new node version on windows using Chocolatey or Scoop
Using(Chocolatey):
cinst nodejs
# or for full install with npm
cinst nodejs.install
Using(Scoop):
scoop install nodejs
Also you can download the Windows Installer directly from the nodejs.org web site
As some of you already said, the easiest way is to update Node.js through the Node.js package manager, npm. If you are a Linux (Debian-based in my case) user I would suggest to add these lines to your .bashrc file (in home directory):
function nodejsupdate() {
ARGC=$#
version=latest
if [ $ARGC != 0 ]; then
version=$1
fi
sudo npm cache clean -f
sudo npm install -g n
sudo n $version
}
Restart your terminal after saving and write nodejsupdate to update to the latest version of Node.js or nodejsupdate v6.0.0 (for example) to update to a specific version of Node.js.
BONUS: Update npm (add these lines to .bashrc)
function npmupdate() {
sudo npm i npm -g
}
After restarting the terminal write npmupdate to update your node package manager to the latest version.
Now you can update Node.js and npm through your terminal (easier).
In windows download the node executable file from the website and install it. this worked for me.
All you need to version update of Node.js:
$ brew install node
If you don't have Homebrew; please go http://brew.sh/.
Just install the new version over the current folder. I upgraded mine from v4.x to v6.10 on Windows.
npm clean cache - you forget to clean ur cache
npm update -g
This works on mine Windows, I hope it will also work for you :D
If you want to update Node.js, just try
npm update
from your Windows cmd prompt.
Else if you want to update any specific package try
npm update <package_name>
Example:
npm update phonegap
open cmd and type
npm i -g npm