Looking for IIS rewrite rule for HTTPS://example.co.uk to HTTPS://www.example.co.uk I have been able to redirect HTTP://example.co.uk & HTTP://www.example.co.uk to HTTPS://www.example.co.uk but unable to create a rule to redirect HTTPS://example.co.uk to HTTPS://www.example.co.uk In IIS the site bindings i have are: http www.example.co.uk 80 http example.co.uk 80 https www.example.co.uk 443
<rule name="https" patternSyntax="Wildcard" stopProcessing="true">
<match url="*" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{REQUEST_URI}" pattern="https://example.co.uk/*" />
</conditions>
<action type="Redirect" url="https://www.{C:0}/{R:1}" />
</rule>
Not very experienced in creating rewrite rules they are already populated from past colleagues
Any assistance would be good : )
you could try below rule:
<rule name="RedirectNonWwwToWww" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="on" />
<add input="{HTTP_HOST}" pattern="^example.co.uk$" />
</conditions>
<action type="Redirect" url="https://www.{C:0}/{R:0}" redirectType="Permanent" />
</rule>
Cheers for your help Lex & Jalpa. I ended up creating site with https www site and adding redirect to the https domain.com site it works
Related
I have an aspx web app accessed via http://domain/web.aspx. This web app uses port 80 and http://domain:80/web.aspx works OK. I would like to redirect all calls to https://domain:82/web.aspx. I've tried using the rewrite rule
<rule name="HTTPS force" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^(.*):80$" />
</conditions>
<action type="Redirect" url="https://localhost:82" appendQueryString="false" />
</rule>
in web.config in the same folder as web.aspx but this has no effect. What rewrite rule do I need to use?
You should use the following as input:
<rule name="HTTPS force" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
</conditions>
<action type="Redirect" url="https://{SERVER_NAME}/{R:1}" redirectType="Permanent" />
</rule>
Not sure if you want the :80 there in the URL? If so, it can be added to my example too. Taken from here: Web.config redirects with rewrite rules - https, www, and more.
Found this rule worked
<rule name="HTTPS force" enabled = "true" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="http://domain/Web.aspx" />
</conditions>
<action type="Redirect" url="https://domain:82/Web.aspx"/>
</rule>
IIS 10 server behind an AWS application load balancer will not redirect traffic for domain without www when client requests http rather than https. The rule to redirect traffic when www is specified works fine, but 404 is returned if you try the same url without www.
So:
Enter "http://dname.com/blog" = 404
Enter "http://www.dname.com/blog" = redirect to "https://www.dname.com/blog"
<rule name="Force HTTPS" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_X_Forwarded_Proto}" pattern="^https$" negate="true" />
<add input="{HTTP_HOST}" pattern="^dname\.com$" />
</conditions>
<action type="Rewrite" url="https://www.dname.com{REQUEST_URI}" />
</rule>
<rule name="Force WWW HTTPS" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_X_Forwarded_Proto}" pattern="^https$" negate="true" />
<add input="{HTTP_HOST}" pattern="^www\.dname\.com$" />
</conditions>
<action type="Redirect" url="https://www.dname.com{REQUEST_URI}" />
</rule>
Nothing worked for me even after going through the answers provided on different forums.
After 2 days of banging my head in this here's what I found which solved the issue :
Bindings : Port 80 must be enabled (This can be added in bindings section in IIS).
SSL settings : Required SSL must be unchecked.
Add Rule :
<rewrite>
<rules>
<rule name="http to https redirection" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}{REQUEST_URI}"
appendQueryString="false" />
</rule>
</rules>
</rewrite>
Verify web config as it should reflect the rule added in IIS.
I don't know why the previously posted rules wouldn't work, but I was able to create a refined rule that is working:
<rule name="Force HTTPS" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_X_Forwarded_Proto}" pattern="^https$" negate="true" />
<add input="{HTTP_HOST}" pattern="^(www\.)?dname\.com$" />
</conditions>
<action type="Redirect" url="https://www.dname.com{REQUEST_URI}" />
</rule>
The above rule combines the two rules instead of looking for the domain without the www and then with the www in a separate rule. The regex (www\.) tells the rule to look for "www." and the question mark tells it that it may or may not be there, so that includes the domain with and without the www.
There is a very very important step that should take care, before setup a redirect configure.
in web Sites project --> Actions(in the right) --> Bindings , the content will like below:
Binding Content
You take carefully the yellow color part, the yellow part is your original web IP address. This original IP address must exist in "Site Bindings", without the yellow part the URL redirect will not working anymore.
The following config is my current IIS URL redirect setting:
<rewrite>
<globalRules>
<rule name="Http redirect to Https" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAny">
<add input="{HTTP_HOST}" pattern="localhost:8080" /> <-- the Red one should match above Site Bindings original IP address
</conditions>
<action type="Redirect" url="https://Your-Host-Name/{R:1}" redirectType="SeeOther" />
</rule>
</globalRules>
</rewrite>
I'm a bit new to using IIS and one of the things i'm trying to do is redirecting a www based domain to a non-www based one
The reason is because i have ssl support for the non-www based domain , while the www domain is showing an ssl error
https://example.com works
https://www.example.com throws an ssl error
I'm using web.config as the webserver , but no matter the changes - i cant get the site to redirect itself to non-www
ive tried two ways in web.config
<rule name="Second_Redirect" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTPS}" pattern="ON" />
<add input="{HTTP_HOST}" pattern="www.(.*.)(.*)" ignoreCase="false" />
</conditions>
<action type="Redirect" url="https://{C:1}" />
</rule>
and also
<rule name="Second_Redirect" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTPS}" pattern="ON" />
<add input="{HTTP_HOST}" pattern="^(www\.)(.*)$" ignoreCase="false" />
</conditions>
<action type="Redirect" url="https://{C:2}" />
</rule>
neither works :(
is there something else i can do?
Thanks
Try this rewrite rule to remove www:
<rule name="remove www url part">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" pattern="^(www\.)(.+)$" />
</conditions>
<action type="Redirect" redirectType="Permanent" url="http://{C:2}/{R:1}" />
</rule>
I am trying to setup https redirects to same site having different bindings.
i.e Site1 = www.domain1.com
Site2 = www.domain2.com
Site3 = www.domain3.com
I am using the following redirect rules but they only work for first site and not working for other 2 sites
<rewrite>
<rules>
<rule name="HTTP/S to HTTPS Redirect" enabled="true" stopProcessing="true">
<match url="http://domain1.com" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
</conditions>
<action type="Redirect" url="https://domain1.com" redirectType="Permanent" />
</rule>
<rule name="HTTP Redirect to HTTPS 2" enabled="true" stopProcessing="true">
<match url="http://domain2.com" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
</conditions>
<action type="Redirect" url="https://domain2.com" redirectType="Permanent" />
</rule>
Please guide what I am missing here. As http://domain1.com redirects to https://domain1.com but domain2 is not working.
I separate my URL rewrites into the web.config for each of the applications within a site, and each site in IIS. Are your rewrite rules at the server root level of IIS?
I am trying to force the use of http on all pages of our site with the exception of a checkout page. I have used the rewrite rule below but it doesn't work with the www sub-domain in the url.
If I use https://domain.com it successfully redirects to http://www.domain.com but if I try https with www nothing happens. Please note that there is also a canonical domain name redirect in place but this issue still happens without this rule.
<rule name="No-https" enabled="true" stopProcessing="true">
<match url=".*" negate="false" />
<action type="Redirect" url="http://{HTTP_HOST}{REQUEST_URI}" />
<conditions>
<add input="{HTTPS}" pattern="on" />
<add input="{URL}" pattern="CheckOut" negate="true" />
</conditions>
</rule>
This has been driving me nuts all morning, I'm hoping someone with more experience of IIS rewrites can give me some help.
Spent a few hours on a similar issue. In my case I'm redirecting traffic from http to https and I want to do the same where sub domains are in use, e.g. http://subdomain.mydomain.com rewrites to https://subdomain.mydomain.com. It seems that for IIS 7.5 at least you need to add a http binding in IIS for each specific subdomain or it will not be picked up by the catch all matching below.
<rewrite>
<rules>
<clear />
<rule name="Redirect to https" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}{REQUEST_URI}" redirectType="Permanent" appendQueryString="false" />
</rule>
</rules>
</rewrite>