Got a trouble:
IBM MQ Server v9.1.0.0
pymqi==1.11.1
When trying connect to server got an error:
pymqi.MQMIError: MQI Error. Comp: 2, Reason 2035: FAILED: MQRC_NOT_AUTHORIZED
When I check traffic in Wireshark i got that:
And in server log this:
07/31/2020 10:08:02 AM - Process(27333.5) User(mqm) Program(amqrmppa)
Host(host) Installation(Installation1)
VRMF(9.1.0.0) QMgr(queue_manager)
Time(2020-07-31T07:08:02.253Z)
ArithInsert1(2) ArithInsert2(2035)
CommentInsert1(haha)
AMQ9557E: Queue Manager User ID initialization failed for 'haha'.
EXPLANATION:
The call to initialize the User ID 'haha' failed with CompCode 2 and Reason
2035. If an MQCSP block was used, the User ID in the MQCSP block was ''.
ACTION:
Correct the error and try again.
My code sample:
import pymqi
host = "host"
port = 1416
conn_info = f"{host}({port})"
channel = "channel"
queue_manager = "queue_manager"
def main():
manager = pymqi.connect(queue_manager=queue_manager, channel=channel, conn_info=conn_info)
if __name__ == '__main__':
main()
I tried to execute the code from other devices and there, accordingly, the account under which I ran was taken as the UserID.
After that I asked our support to deal with the problem, after which I was able to connect with an account haha, but the solution with the creation of a list of allowed users does not suit me. Is there any way to control the UserID that is sent by pymqi?
UPD 04.08.2020
The support team said that the user phoenix was created on the IBM MQ server with the password 123456789, tried to send an MQSCP:
manager = pymqi.connect(queue_manager=queue_manager, channel=channel,
conn_info=conn_info, user="phoenix", password="123456789")
And got similar error MQRC_NOT_AUTHORIZED and server log contains error as above with username of machine where code launches (not phoenix).
Related
I am following the steps from this guide to connect to the on-prime database using spark.
https://learn.microsoft.com/en-us/azure/synapse-analytics/spark/data-sources/apache-spark-sql-connector
tried this code:
servername = "XXXXX"
dbname = "poplesdb"
url = servername + ";" + "databaseName=" + dbname + ";"
dbtable = "Test"
user = "test\user"
password = mssparkutils.credentials.getSecret('xxxx','xxxxxxx')
I got this error:
Py4JJavaError: An error occurred while calling z:mssparkutils.credentials.getSecret.
: com.twitter.finagle.NoBrokersAvailableException: No hosts are available for XXXX.vault.azure.net:443, Dtab.base=[], Dtab.local=[]. Remote Info: Not Available
I am trying this connection test since days. please anyone help me?
Here my screen shots of linked service . I need to connect the source inside retail database
Py4JJavaError: An error occurred while calling
z:mssparkutils.credentials.getSecret. :
com.twitter.finagle.NoBrokersAvailableException: No hosts are
available for XXXX.vault.azure.net:443, Dtab.base=[], Dtab.local=[].
Remote Info: Not Available
Given error indicates that a request failed because no servers were available. This typically occurs under one of the following conditions:
The cluster is actually down. No servers are available. - A service discovery failure. This can be due to a number of causes, such as the client being constructed with an invalid cluster destination name or a failure in the service discovery system (e.g. DNS).
A good way to diagnose NoBrokersAvailableExceptions is to reach out to the owners of the service to which the client is attempting to connect and verify that the service is operational. If so, then investigate the service discovery mechanism that the client is using.
I am trying to connect to a FileMaker Databse server via python script, and my code was working before but has suddenly stopped, and i didnt make any changes to the portion of code that no longer works. I am encountering the following error:
Request error: HTTPSConnectionPool(host='**.**.*.*', port=443): Read timed out. (read timeout=30)
I have taken out the code that creates the server instance and connects/logs in, and then logs out without making any changes in the database, and i am still recieving the same error. However, i can connect to the filemaker server and database via the FileMaker applicaiton with no issues, and i can connect to the server using Telnet commands. I am on windows 10 and writing the code in PyCharm CE. I have reinstalled PyCharm, created a new virtual environment, and tried reinstalling the fmrest module, as well as using older versions. I have also increased the timeout time to give more time to login, which hasnt worked. I'm basically stumped on why i can no longer log in via the script, when it has been working perfectly in testing for the past couple weeks. My code is below.
import fmrest
from fmrest.exceptions import FileMakerError
from fmrest.exceptions import RequestException
import sys
import requests
# connect to the FileMaker Server
requests.packages.urllib3.disable_warnings()
fmrest.utils.TIMEOUT = 30
try:
fms = fmrest.Server('https://**.**.*.*',
user = '***',
password = '******',
database = 'Hangtag Order Management',
layout = 'OrderAdmin',
verify_ssl = False)
except ValueError as err:
print('Failed to connect to server. Please check server credentials and status and try again\n\n' + str(err))
sys.exit()
print(fms)
print('Attempting to connect to FileMaker Server...')
try:
fms.login()
print('Login Successful\n')
except FileMakerError as err:
print(err)
sys.exit()
except RequestException as err:
print('There was an error connecting to the server, the request timed out\n\n' + str(err))
sys.exit()
fms.logout()
This should successfully login to the database, print 'login successful' and log out. Calling print(fms) returns
<Server logged_in=False database=Hangtag Order Management layout=OrderAdmin>
but i receive the connection error upon the login attempt. I am assuming the error is server side, but i dont know enough about servers to accurately trouble shoot. Could the server have blacklisted my IP for making so many login attempts during my testing? and if so where would i undo that/prevent it from happening again?
A couple of server reboots fixed the error, not really sure of the ultimate cause.
I want to consume messages from a already setup solace broker in my company. When i asked for the host name etc required to connect with solace, below details were provided by my company's solace team-
Connection factory - cf/dev_test_uk
VPN - dev_test_uk
VPN Server - smf://host:port
username - user1
password - password1
topic- testtopic
For reference I am using the code provide at https://github.com/SolaceSamples/solace-samples-amqp-qpid-proton-python
My code is -
from proton import Message
from proton.handlers import MessagingHandler
from proton.reactor import Container
class HelloWorld(MessagingHandler):
def __init__(self,url,address,username,password):
super(HelloWorld,self).__init__()
self.url = url
self.address = address
self.username = username
self.password = password
def on_start(self,even):
conn = event.container.connect(url = self.url,
user=self.username,
password=self.password)
event.container.create_receiver(conn, self.address)
def on_message(self, event):
print(event.message.body)
event.connection.close()
Container(HelloWorld("smf://host:port","topic://testtopic","user1","password1")).run()
when I run this code I get 'amqp:connection:framing-error',"SASL header mismatch:Insufficient data to determine protocol [''] (connection aborted)"
Which is expected as I don't think the url or address string formed is correct.
Following are the questions I have-
where should i use this VPN and connection factory while doing the connections?
VPN server url should't it be something like amqp://.... ?
Please help me with this.
Unfortunately....
Solace NO support python module to access Solace Protocol(SMF)....
you can OLNY wrap C API by yourself.....
because I am also need this Python Client API.....
so you can ref our project....
https://pypi.org/project/pysolace/
(WARRNING - unofficial)
I am trying to create a script that will run commands over my 1000 Cisco devices.
The device model is: Cisco Sx220 Series Switch Software, Version 1.1.4.1
The issue is that there is some kind of strange behavior for some of those Cisco devices.
When I am trying to login with regular SSH (PUTTY) with the correct credentials we are first getting 'Authentication Failure' and after 1 seconds I am getting the User Password Prompt again, typing the same credentials again is giving me a successful login.
The problem is that when I am trying to connect using my script (uses ParallelSSHClient), the connection drops after getting the authentication failure message and not able to enter the credentials again since it is getting the exception and terminal the program.
I am looking for a way to enter those credentials manual by connecting to the machine, getting the Authentication Failure message and ignoring it, recognizing that the current prompt has the User or Password appears on screen and then send it manually.
I look for this kind of procedure anywhere but without any luck.
Does ParallelSSHClient has this feature?
If Paramiko has it, I am willing to move to Paramiko.
Thanks :)
try:
client = ParallelSSHClient(hosts=ip_list, user=user, password=password)
except Exception as err:
print("There was an issue with connecting to the machine")
command_output = client.run_command(command)
Here is the accrual error that I am getting:
pssh.exceptions.AuthenticationException: ('Authentication error while connecting to %s:%s - %s', '172.31.255.10', 22, AuthenticationException('Password authentication failed',))
I am attempting to obtain a data feed from yahoo finance. I am doing this with the following code:
System.Net.WebRequest request = System.Net.WebRequest.Create(http://download.finance.yahoo.com/download/quotes.csv?format=sl&ext=.csv&symbols=^ftse,^ftmc,^ftas,^ftt1x,^dJA);
request.UseDefaultCredentials = true;
// set properties of the request
using (System.Net.WebResponse response = request.GetResponse())
{
using (System.IO.StreamReader reader = new System.IO.StreamReader(response.GetResponseStream()))
{
return reader.ReadToEnd();
}
}
I have placed this code into a console application and, using Console.WriteLine on the output I receive the information I require. I have used the 'Run as..' command to execute this using a specific domain account.
When I use this code from within a Page load I receive the following error message "No connection could be made because the target machine actively refused it 76.13.114.90:80".
This seems to suggest that the call is reaching yahoo (is this true?) and that there is something missing.
This would suggest there is an identity difference in the calls between the console application and application pool.
Environment is: Windows Server 2003, IIS 6.0, .net 4.0
"Target machine actively refused it" indicates that the TCP connection itself is not succeeding. This could be due to the fact that the Proxy settings when run under IIS are not the same as those that apply when you run in the console.
You can fix this by setting a WebProxy on your request, that points to the proxy server being used in the environment.
Yes, an active refusal is indication that the target machine is receiving the request and the information in the headers is either incorrect or insufficient to process the request. It is entirely possible that if you had to run this call using a "run as" command in console that the application pool's identity user does not have the appropriate permission or username. You can attempt to change the identity user to this specific domain account to see if that alleviates the problem, but you may have to isolate this particular function into its own application pool in order to protect the rest of the website from having this specification.