Find maximum value in a range of strings - excel

I have a spreadsheet with number of different sheets. Each sheet has a column with unique ID which is made up as follows: AD-S001, AD-S002, AD-S003 etc. The next sheet's unique ID could be AD-M001, AD-M002 etc.
I am pretty new to VBA in excel and am trying to write some code to create a new record, incrementing the unique ID. The unique ID's are sometimes not sorted so I need to find the largest in the range and then increment it by 1.
I have the other code already, just trying to add the bit that finds the largest value in the range of strings and increments it by 1.
Grateful if someone could assist me in how best to write this sub-routine.
Thanks

Use the next function, please:
Function newID(sh As Worksheet) As String
Dim lastR As Long, strID As String, arr As Variant, i As Long
lastR = sh.Range("A" & Rows.count).End(xlUp).Row
arr = sh.Range("A2:A" & lastR).Value
strID = left(sh.Range("A2").Value, 4)
For i = 1 To UBound(arr)
arr(i, 1) = CLng(Right(arr(i, 1), 3))
Next i
newID = strID & Format(WorksheetFunction.Max(arr) + 1, "000")
End Function
It can be called/used in this way:
Sub testNewID()
Dim sh As Worksheet
Set sh = ActiveSheet 'use here the necessary worksheet
MsgBox newID(sh)
End Sub

A non-VBA alternative, see if it is acceptable.
Set the format for the column as below
"AD-S"000
And then you can simply use a MAX formula to get the maximum value in preceding cells. Assuming first numbered cell is A2, formula in cell A3 would be:
=MAX($A$2:A2)+1
which can then be copied down as much needed.

Related

Search a list of strings in a column where each cell contains multiple values

I have a column where each cell has multiple strings divided by a "/". I have as well a list of strings.
I want to search for each item of the list in the column and each time that I find an item write in another column with the addition of the Shortname next to it.
Each one of those columns are in different worksheets.
Something like the image below:
The first column is where I want to search, the second is what I want to search, and the third is the resulting column.
For every string that starts with "GPRF_", I want to write it in the third column with the Shortname associated to it.
In this example "GPRF_TxChPower" appears 3 times, so it is written 3 times with each Shortname associated to it before passing to the next item.
Example
For now, I used this line:
IF(ISNUMBER(SEARCH(G35;TestConfigs!$B$3&"|||"&TestConfigs!$B$4&"|||"&TestConfigs!$B$5&"|||"&TestConfigs!$B$6&"|||"&TestConfigs!$B$7&"|||"&TestConfigs!$B$8&"|||"&TestConfigs!$B$9&"|||"&TestConfigs!$B$10&"|||"&TestConfigs!$B$11));1;0)
That basically searches what I want(G35), which is in the worksheet Commun, in the column(B3:11) on the worksheet TestConfigs, if it is found returns 1 else 0 to the cell (F35), also in the worksheet Commun.
And then in the column I want the values to be written I did:
=IF(Commun!F35=1;Commun!G35;"")
If the result in F35 is 1, I write what is written in G35, else "".
Please, try the next code. It uses only two sheets, processing against "GPRF_" prefix. Using arrays and working mostly in memory, it should be very fast. It assumes that the range to be processed has the headers on the second row and cells to be iterated starting from the third row. It returns in the Next sheet. It may return anywhere if you correctly Set sh2...
Sub ExtractShortNameByPrefix()
Dim sh1 As Worksheet, lastR As Long, sh2 As Worksheet, arr, arrCell
Dim i As Long, j As Long, dict As Object
Const strPref As String = "GPRF_" 'prefix to be searched for
Const colToReturn As Long = 1 'column number where to return the processed array
Set sh1 = ActiveSheet 'use here the sheet to be processed (your Worksheet1)
Set sh2 = sh1.Next 'use here the sheet where to return (your Worksheet3)
lastR = sh1.Range("A" & sh1.rows.count).End(xlUp).row 'last row
arr = sh1.Range("A3:B" & lastR).Value2 'place the range in an array for faster iteration and processing
Set dict = CreateObject("Scripting.Dictionary")
For i = 1 To UBound(arr)
If InStr(arr(i, 1), strPref) > 0 Then
arrCell = Split(arr(i, 1), "/") 'split the string by "/" separator if prefix exists
For j = 0 To UBound(arrCell)
If left(arrCell(j), Len(strPref)) = strPref Then
dict(arrCell(j) & "_" & arr(i, 2)) = 1 'place in the dictionay as key UNIQUE concatenations...
End If
Next j
End If
Next i
'drop the processed dictionary keys:
With sh2.cells(2, colToReturn).Resize(dict.count, 1)
.Value2 = Application.Transpose(dict.Keys)
.cells(1, 1).Offset(-1).value = strPref
.EntireColumn.AutoFit
End With
You can change "strPrefix" and "columnToReturn" constants to process a different prefix and return in a different column...
Please, send some feedback after testing it.
I did not get you question right, but if you want to find how many times one text is repeated in other text you can use this:
=(LEN(B3)-LEN(SUBSTITUTE(B3,B4,"")))/LEN(B4)
where B3 is long text, and B4 is text to search.

Is there a VBA worksheet function that will allow me to do a two layer search?

Is there any formula that I can use to make a double-layer search?
I want to be able to gather whatever information on the third column that meets two criteria.
It has to be one location (in this case, Indonesia)
It has to be a particular industry (FMCG)
Example here:
If industry size is a numeric field, you got 2 options to get this. If not, then you can do it only with MATCH and INDEX
With MATCH/INDEX: =INDEX($C$2:$C$11;MATCH(F17&G17;A2:A11&B2:B11;0))
With SUMIFS: =SUMIFS($C$2:$C$11;$A$2:$A$11;F18;$B$2:$B$11;G18)
Depending on your Excel version, the MATCH formula may need to be introduced as an array formula so you must introduce it pressing CTRL+SHIFT+ENTER
If you want a VBA solution, please use the next function:
Function extractIndSize(strCountry As String, strInd As String, rng As Range) As Variant
Dim i As Long, arr
arr = rng.value
For i = 1 To UBound(arr)
If arr(i, 1) = strCountry And arr(i, 2) = strInd Then
extractIndSize = arr(i, 3): Exit Function
End If
Next i
End Function
It can be tested using the next way:
Sub testExtractIndustrySize()
Dim sh As Worksheet, lastR As Long, rng As Range
Set sh = ActiveSheet
lastR = sh.Range("A" & sh.rows.count).End(xlUp).Row
Set rng = sh.Range("A2:C" & lastR)
MsgBox extractIndSize("Indonesia", "FMCG", rng)
End Sub
The function can also be called (as UDF) from a cell, using the next formula:
=extractIndSize(E2,F2,A2:C11)
Where in "E2" the country name must be introduced, in "F2" the industry name and the third parameter is the range to be processed (selected with the cursor),,,

Find cell row with 2 criteria

Is it possible to find a row with 2 criteria?
I'm importing survey anwsers to a worksheet, now I want to find the answers of a specified person
I need to find the row in the worksheet(ImportLimesurvey) that has 2 specified cell values:
In that row:
the value of the C-cell has to be one of the highest value in that column (I used the function Application.WorksheetFunction.Max(rng))
This value means how much of the survey is filled in. The highest value stands in multiple answer-rows. The highest value is different for every survey. (example, if a survey has 7 pages and the participant fills in all pages :the highest value is 7 for that person, but if the person didn't complete that survey, the value could be e.g. 3), So the filter of the highest value is if the participant completed the whole survey.
the value of the L-cell has to be the same as the cell (Worksheets("Dataimport").Range("M2")
M2= accountnumber of the person I need the answers from
The correct row has to be pasted to (Worksheets("Dataimport").Range("A7")
This is my current code:
Dim g As Range
Dim rng As Range
Set rng = Worksheets("ImportLimesurvey").Range("C:C")
d = Application.WorksheetFunction.Max(rng)
With Worksheets("ImportLimesurvey").Range("L:L")
Set g = .Find(Worksheets("Dataimport").Range("M2"), LookIn:=xlValues)
g.Activate
End With
e = Range("C" & (ActiveCell.Row))
If e = d Then
ActiveCell.EntireRow.Copy _
Destination:=Worksheets("Dataimport").Range("A7")
End If
The problem here is that he finds the row with the right account number, but the answer with the C-value isn't always the highest. It picks (logically) just the first row with that accountnumber. So how can I find the row that matches those 2 criteria?
Thanks in advance
P.S. I'm new to VBA so I tried to be as specific as possible but if you need any additional info, just ask for it ;)
dmt32 forom mrexcel.com found a solution.
Link to topic: https://www.mrexcel.com/board/threads/find-row-with-2-criteria.1157983/
His code works fine:
Sub FindMaxValue()
Dim FoundCell As Range, rng As Range
Dim MaxValue As Long
Dim Search As String, FirstAddress As String
Dim wsDataImport As Worksheet, wsImportLimesurvey As Worksheet
With ThisWorkbook
Set wsDataImport = .Worksheets("Dataimport")
Set wsImportLimesurvey = .Worksheets("ImportLimesurvey")
End With
Search = wsDataImport.Range("M2").Value
If Len(Search) = 0 Then Exit Sub
With wsImportLimesurvey
Set FoundCell = .Range("L:L").Find(Search, LookIn:=xlValues, lookat:=xlWhole)
If Not FoundCell Is Nothing Then
FirstAddress = FoundCell.Address
Do
With FoundCell.Offset(, -9)
If .Value > MaxValue Then Set rng = FoundCell: MaxValue = .Value
End With
Set FoundCell = .Range("L:L").FindNext(FoundCell)
If FoundCell Is Nothing Then Exit Do
Loop Until FoundCell.Address = FirstAddress
rng.EntireRow.Copy wsDataImport.Range("A7")
MsgBox Search & Chr(10) & "Record Copied", 64, "Match Found"
Else
MsgBox Search & Chr(10) & "Record Not Found", 48, "Not Found"
End If
End With
End Sub
Still thanks for the tips.
Firstly, Visual Basic conceptual topics is a great read to help in writing 'better' code. The biggest thing I encourage is to use meaningful variable names.
It's much easier to understand your code when you have variable names like HighestCount or TargetSheet etc. rather than names like a or b etc.
The answer to your question is yes.
I would write something like this:
Option Explicit
Public Function HighestSurveyRow(ByVal TargetAccountNumber As Long) As Long
Dim ImportLimeSurveySheet As Worksheet
Set ImportLimeSurveySheet = ThisWorkbook.Sheets("ImportLimeSurvey")
Dim LastRow As Long
Dim TargetRow As Long
Dim SurveyCountArray As Variant
Dim ArrayCounter As Long
With ImportLimeSurveySheet
ArrayCounter = 1
LastRow = .Cells(.Rows.Count, 12).End(xlUp).Row
ReDim SurveyCountArray(1 To LastRow, 1 To 2)
For TargetRow = 1 To LastRow
If .Cells(TargetRow, 12).Value = TargetAccountNumber Then
SurveyCountArray(ArrayCounter, 2) = TargetRow
SurveyCountArray(ArrayCounter, 1) = .Cells(TargetRow, 3).Value
ArrayCounter = ArrayCounter + 1
End If
Next TargetRow
End With
Dim ResultArray(1 To 2) As Variant
Dim ArrayElement As Long
For ArrayElement = 1 To UBound(SurveyCountArray, 1)
If SurveyCountArray(ArrayElement, 1) > ResultArray(1) Then
ResultArray(1) = SurveyCountArray(ArrayElement, 1)
ResultArray(2) = SurveyCountArray(ArrayElement, 2)
End If
Next ArrayElement
HighestSurveyRow = ResultArray(1)
End Function
Sub FindRowForSurveyResults()
With ThisWorkbook.Sheets("DataImport")
.Range("A7").Value = HighestSurveyRow(.Range("M2").Value)
End With
End Sub
It's split into a Function and a Subroutine. The Function executes most of the code and returns the row number. The Sub calls this function and writes this returned value to cell A7 on "DataImport".
The sub can be broken down as follows;
Using a with statement helps reduce code clutter of defining the worksheet twice.
The only thing the sub is doing is assigning a value to cell A7. To get the value it calls the function and assigns the parameter TargetAccountNumber as the value from cell M2.
The function can be broken down into the following steps;
All variables are declared and the target worksheet for the function is set.
The LastRow of column L is found to establish our maximum length of the Array and search range.
The Loop searches from Row 1 to the LastRow and compares the values from column L. If it matches the TargetAccountNumber parameter then the column C value and the row number are stored into the Array.
Once the Loop is done, another Loop is run to find the highest number. The first iteration will always store the first row's data. Each iteration after that compares the values stored in the SurveyCountArray with the current value of ResultArray(1) and if the value is greater, ResultArray(1) is updated with the value, ResultArray(2) is updated with the Row number.
Once the 2nd loop is done, the Row in ResultArray(2) is assigned to the function for the Sub to write to the worksheet.
It can definately be improved and refined to work faster and more efficiently, especially if you have a very large data set, but this should help get you thinking about ways you can use loops and arrays to find data.
Note: There could be duplicate rows for the outcome (say a user submits the same survey 3 times with the same answers), which I haven't tested for - I think this code would return the highest row number that matches the required criteria but could be tweaked to throw an error or message or even write all row numbers to the sheet.

How to count number of occurrences of a value and the value of adjacent cell in a range

Edit: This question has been re-worked to provide better clarity of my problem.
There's 2 factors to my question.
First Factor: I have a validation list in a sheet called "Admin Sheet". In that list are 'Tasks'.
I would like to cross reference those tasks in the "list", against those contained in a range (rangeString) taken from another sheet and count the number of 'Occurrences' for each item.
i.e. Task 1 appears 3 times, Task 2 appears 1 time, etc etc..
Factor 2: For each item within the list I would also like to gather the number of 'Hours' spent on that task.
For example:
Task 1 may appear 3 times on 3 different rows within the range. On each row in another column are the hours spent on that particular task. I would like to 'Sum' those hours from the 3 rows and I'd like to do this for all the 'Tasks'.
Note: The range is variable and will change daily.
Note: The columns that contain the info are: 'F' - Tasks and 'K' for Hours.
My current attempt at just capturing 'one' Task and its Hours associated with it:
Dim PaintWWArray() As Variant
Dim PHoursCnt As Long
Set srchRng = ActiveSheet.Range(rangeString)
Set rngfindValue = srchRng.find(what:="AD PAINTING W/W", Lookat:=xlPart)
'Find all the Tasks and Hours
If Not rngfindValue Is Nothing Then
rngFirstAddress = rngfindValue.Address
Do
PaintWWCnt = PaintWWCnt + 1
PHoursCnt = rngfindValue.Offset(0, 4).Value
ReDim Preserve PaintWWArray(PHoursCnt)
PaintWWArray(PHoursCnt) = PHoursCnt
Set rngfindValue = srchRng.FindNext(rngfindValue)
Loop Until rngfindValue Is Nothing Or rngfindValue.Address = rngFirstAddress
PWWSum = Application.WorksheetFunction.Sum(PaintWWArray)
MsgBox PWWSum
End If
Once I have collected the number of 'Occurrences' for each Task and the Sum of the hours for each task, I want to pass them into another sheet.
Worksheets("Weekly Data").Range("C6").Value = PaintWWCnt
Worksheets("Weekly Data").Range("D6").Value = PWWSum
I hope this is clearer...
I would suggest using a Dictionary.
Assuming you want to count all words:
Dim myDict
Set myDict = CreateObject("Scripting.Dictionary")
' Go through the array
For Each addDuty In arr
' If you only want to count specific words, add in IF statement here
myDict(addDuty) = myDict(addDuty) + 1
Next addDuty
If you only want to count words in an exiting set, it becomes slightly more elaborate.
It's not entirely clear what you want to achieve but the code below should give you the data you need. It's very fast. Please try it.
Private Sub STO_Answer()
' 024
' this procedure requires a reference to be set to
' Microsoft Scripting Runtime
Dim Counter As Scripting.Dictionary ' store task names and their count
Dim Arr As Variant ' an array of the data in Rng
Dim CellVal As Variant ' temporary storage of each cell value
Dim R As Long ' row counter
Dim Key As Variant ' a dictionary Key
Arr = ActiveSheet.Range("C2:D27").Value ' change to name the sheet
' adjust the range to suit
Set Counter = New Scripting.Dictionary
With Counter
For R = 1 To UBound(Arr) ' loop through all rows
AddToCounter Arr(R, 1), Counter ' first column of cell range
AddToCounter Arr(R, 2), Counter ' second column of cell range
Next R
For Each Key In Counter.Keys
Debug.Print Key, Counter.Item(Key)
Next Key
End With
End Sub
Private Sub AddToCounter(CellVal As Variant, _
Counter As Scripting.Dictionary)
' 024
With Counter
If .Exists(CellVal) Then
.Item(CellVal) = .Item(CellVal) + 1
Else
.Add CellVal, 1
End If
End With
End Sub
A Dictionary is a data structure which holds two related values. Here it's used to hold the task name and the number of times it occurs. Make sure you enable the reference to Microsoft Scripting Runtime in Tools > References. You don't specify if there is any relationship- between the tasks in the first column and the second. The above code counts both independently for now.
The result is printed to the Immediate Window. Of course, you might use this result in any other way in your code. Your question doesn't cover your intentions.
You won't be able to escape from the necessity to present your count in some way forever. As it turns out, there is only one efficient way to do it. This one:-
All duties are in column A and all added duties are in row 2.
Of course, you might use rather elaborate VBA to do the counting but Excel has a better way using a worksheet function. In order to set up COUNTIF() to work I created two named ranges as follows.
["Duties"] =OFFSET(Sheet2!$C$2,0,0,COUNTA(Sheet2!$C:$C)-1)
and
["AddDuties"] =OFFSET(Duties,0,1)
Sheet2!$C$2 is where my data started. Replace with the first cell of the first column of your data range. COUNTA(Sheet2!$C:$C)-1 makes this range dynamic. The function counts how many entries there are in that same column, -1 because the count would include a caption (modify if you have more or fewer headers).
AddDuties is simply defined as "same as Duties" but removed by one column to the right. You could move it elsewhere. As you add or delete rows in the column of Duties, AddDuties expands or contracts right along.
Now the formula in B3 is shown below. It's copied down and across as required. Please observe the $ signs.
[B3] =COUNTIFS(Duties,$A3,AddDuties,B$2)
This will probably generate a lot of zeroes. It did in my example and I didn't like them. Therefore I formatted B3 with the Custom cell format 0;; before copying to the other cells, which hides them.
Now this list would automatically update as you make entries in your data. You will never have to run code and the list will always be ready.
Finally, one recommendation. All your added duties, like "AD PAINITNG H/R", are hard to type correctly. Therefore the user should select them from a validation drop-down when entering them in the data. Most probably, you already have a list somewhere which feeds such drop-downs. The captions in the count list must be taken from the same source. But that creates redundancy. The better way is to make the list in B2:H2 of the count list the "original". Name the range and make it dynamic and you will never have to think about this subject again.
i think a better approach would be to use for each loops, this way you won't have to hardcode the conditions via IfElse. If you have the values in column A of a sheet and wants to go through those values and get their adjacent value in column B, you can use For Each looping to go through each values defined in A to get B.
just to add, regarding on counting of occurrence, you can define a counter that would add up for each occurrence of a unique value in column A.
I do not have time to wait for clarifications I asked... I prepared a piece of code, starting from the assumption that your strings to be counted are in column "F:F", and the value to be calculated is in column "K:K". The processing result is dropped on the last available column of the active pages, starting from row 2. If you prefer some relevant headers for the two involved columns, this can be easily automated. I used "Tasks and "Time...
It is able to deal with as many 'task' strings you will have in the future.
I commented the code lines, where I thought you do not understand what they do:
Sub CountOccurrencesAndValues()
Dim sh As Worksheet, rngF As Range, arrOcc As Variant, lastRow As Long, lastCol As Long
Dim arr As Variant, arrFin As Variant, countI As Long, valH As Double, j As Long, k As Long, i As Long
Set sh = ActiveSheet
lastRow = sh.Range("F" & Rows.count).End(xlUp).Row
lastCol = sh.UsedRange.Columns.count + 1
Set rngF = sh.Range("F2:F" & lastRow) 'the range where from to extract the unique values
arr = sh.Range("F2:K" & lastRow) 'the array to be processed
'Extract the unique values. Use for that a not used column:
rngF.AdvancedFilter Action:=xlFilterCopy, CopyToRange:=sh.Cells(1, lastCol), Unique:=True
'Put the unique values (sttrings) in an array:
arrOcc = sh.Range(sh.Cells(1, lastCol), sh.Cells(sh.Cells(Rows.count, lastCol).End(xlUp).Row, lastCol)).value
'Clear the temporary used array:
sh.Range(sh.Cells(1, lastCol), sh.Cells(sh.Cells(Rows.count, lastCol).End(xlUp).Row, lastCol)).Clear
ReDim arrFin(1 To UBound(arrOcc, 1), 1 To 3)
k = 1
'Processing the range by iteration:
For i = 1 To UBound(arrOcc, 1)
For j = 1 To UBound(arr, 1)
If arr(j, 1) = arrOcc(i, 1) Then
'count the occurrences and the value
countI = countI + 1: valH = valH + arr(j, 6)
End If
Next j
'put the data in the final array
arrFin(k, 1) = arrOcc(i, 1): arrFin(k, 2) = countI: arrFin(k, 3) = valH
countI = 0: valH = 0: k = k + 1
Next i
'Drop the data from array in the last available column:
'sh.Cells(1, lastCol).value = "Tasks": sh.Cells(1, lastCol + 1).value = "Count": sh.Cells(1, lastCol + 2).value = "Time"
'sh.Cells(2, lastCol).Resize(UBound(arrFin, 1), UBound(arrFin, 2)).value = arrFin
Dim ws As Worksheet
Set ws = Worksheets("Weekly Data")
'Drop the data from array in "Weekly Data" worksheet:
ws.Range("C6").value = "Tasks": ws.Range("D6").value = "Count": ws.Range("E6").value = "Time"
ws.Range("C7").Resize(UBound(arrFin, 1), UBound(arrFin, 2)).value = arrFin
End Sub

Stumped with WorksheetFunction.Match() in Excel

This is some VBA code I've written for Excel. I'm trying to match entries in Sheet1 with those in Sheet2. The structure of both sheets is as follows:
DATE | ID |
----- ----
Date1 ID1
Date2 ID2...
In my code, I loop through the rows of the first sheet, and set the values from each particular row as part of my MATCH() query, in hopes of finding these same values in the second sheet. When I do, I want MATCH() to return the row index it finds these values in, so I can use that same row to input further information from the first sheet. This query uses multiple criteria, as indicated by both the value and searchRange variables (I'm trying to use the multiple criteria via concatenation method, as seen in this article).
The problem is, I consistently get a WorksheetFunction.Match could not be used error. When I used one single criteria (the ID), the function worked. When I tried to use multiple ones, it failed, even though I followed the instructions seen in the previously linked article. Any suggestions or ideas to fix this would be appreciated.
Sub runComparison(Sheet1 As String, Sheet2 As String)
Dim rowCount As Variant, columnCount As Variant, information As Variant
Dim counter As Integer
Dim value As String, searchRange As String
Sheets(Sheet2).Select
'Array of the number of rows in both sheets
rowCount = Array(Sheets(Sheet1).Cells(Rows.count, "A").End(xlUp).row, Sheets(Sheet2).Cells(Rows.count, "A").End(xlUp).row)
'Array of the number of columns in both sheets
columnCount = Array(Sheets(Sheet1).Cells(1, Columns.count).End(xlToLeft).Column, Sheets(Sheet2).Cells(1, Columns.count).End(xlToLeft).Column)
'The range in which we will look for the date and the ID
searchRange = CStr(Range(Cells(2, 1), Cells(rowCount(1), 1)).Address & "&" & Range(Cells(2, 2), Cells(rowCount(1), 2)).Address)
counter = 2
Do Until counter = rowCount(0)
'Sets the search term equal to the current cell in Sheet1
value = Sheets(Sheet1).Cells(counter, 1) & "&" & Sheets(Sheet2).Cells(counter, 2)
' Attempts to set the cell in the 8th column in the same row in which the search term is found equal to a certain value from the search term's row
Cells(WorksheetFunction.Match(value, searchRange, 0), 8) = Sheets(Sheet1).Cells(counter, columnCount(0)).value
counter = counter + 1
Loop
End Sub
Edit: Here's some sample input
value = '7/14/2014&ESTUOUW1046465464'
searchRange = '$A2:$A298&$B2:B298'
UPDATED
Thanks for clarifying in comments. I removed my original answer as it pertains only to the regular "Match" function, and I see the reference/example and understand what you're trying to do now which involves an array formula.
Let's try this using Application.Evaluate which will avoid the need to put this formula in a cell. Using the example data from MS, I did this which seems to work:
Sub test()
Dim value As String
Dim srcRange As String
value = "D2&E2"
srchRange = "$A$2:$A$5&$B$2:$B$5"
Debug.Print Application.Evaluate("=MATCH(" & value & "," & srchRange & ",0)")
End Sub
Applying that in your code, I think would be like below. YOu will still want to Dim matchVal as Variant to hold the result of the formula evaluation, I think. Then do this:
Do Until counter = rowCount(0)
'Sets the search term equal to the current cell in Sheet1
value = Sheets(Sheet1).Cells(counter, 1) & "&" & Sheets(Sheet2).Cells(counter, 2)
'## Assign the result of the Match function to a variable
matchVal = Application.Evaluate("=MATCH(" & value & "," & searchRange & ",0)")
'## Check for errors, and handle as needed:
If IsError(matchVal) Then
'modify as needed, this highlight the cell with the non-matched value
' you might omit this line and simply ignore it, or you could
' display a MsgBox prompt, etc.
Sheets(Sheet1).Cells(counter, columnCount(0)).Interior.ColorIndex = 6
Else:
Cells(matchVal, 8) = Sheets(Sheet1).Cells(counter, columnCount(0)).value
End If
counter = counter + 1
Loop

Resources