I want to keep a track of when I open or close Vim. Does Vim store its start time anywhere? Or tracking Vim start time from bash_history is a better approach? For example, if I open five times a day, I want to save the different times at which I have opened vim.
Thanks
If you just want to track time using for a Vim session, the simple solution is using GNU time, i.e time vim some_file.txt.
Or a more flexible way is using Vim script. For example, add this line in your .vimrc
let g:start_time = strftime('%c')
and then in a vim session
:echo g:start_time
Related
I use vim and its netrw plugin to edit remote files too often. Many times, I had to close the current session and start a complete new session again later. But loading all those files (a lot of them) takes a lot of time and involvement (since I need to go to different dir and load those files one-by-one manually).
I need help to automate the file-loading process in the netrw.
I tried to do it myself using execute and normal! but there seems to be some problem (as the search operation like execute 'normal! /root' does not seem to work).
I tried using <CR> and it gives me Trailing characters error.
I know the absolute path of the files that I want to load. How can I automate the file-loading process ?
You've already used the right term in your question: sessions can help with that. You create one via :mksession; this basically generates a Vim script that, when executed (via :source Session.vim) in a new Vim instance, will restore all current buffers. This also works with netrw's remote buffers - I only had to reload via :e! to fetch the contents again.
Note: There are plugins that further simplify session handling; I can recommend the vim-session plugin.
I was using gedit for a while and now I am using vim . There was a nice option of autosave in gedit . I want to know if there is an option of autosaving in vim. I want to save my codes which I am writing after every 1 minute because of the disruption of electricity.
You can use the vim-auto-save script to save files every time their buffers are modified.
I had rather a lot of text on my clipboard whenever I accidentally right clicked inside Putty (with Vim open), and Vim has initiated a paste operation which has been going for around ten minutes now.
I don't want to lose my unsaved work, is there a way to instruct Vim to stop pasting text?
If you're in normal mode, Ctrl-C aborts the current command in progress. Then press u to undo anything that changed before you stopped it.
Depending os your vim configuration, there's chances that you have a swap file (backup) in .nameOfTheOpenedFile.swp (substitute nameOfTheOpenedFile with the name for your file).
To recover the file :
vim -r .nameOfTheOpenedFile.swp
I know this is really old but the top answer is not right and I was clearly having a similar issue to OP. (accidentally pasted like a million lines of json into vim)
Keep in mind this may not allow you to save your work (but you can probably salvage something from the .swp file)
All you need to do is open a new terminal window and enter pkill vim into the command line.
I know that I can close all opened buffers in vim by :qall.
I want to close event to pending opening buffers.
I have problem while reviewing my changes in P4 sandbox. When I have changes in multiple files and I try to review my code with "P4 diff" and set my P4DIFF to vimdiff.
It opens one by one vimdiff of all changed files. Now if I have 10 opened files and after reviewing 2 files I want to close diff for remaining 8 files. How can I do that?
Thanks,
This sounds like a job for hastily learnt Vimscript!
Particularly, the :bufdo, if, and match statements!
Try out the following:
:bufdo if match(expand("%"), ".vim") >= 0 | bw | endif
bw is for buffer wipe in Ex-mode (the : operator)
expand("%") returns the name of the current buffer
match(string, pattern) finds the index of a pattern in string
|'s separate lines if you're in Ex-mode
This matches buffers that contain .vim in their filenames and closes those buffers.
I'm guessing if these are temp buffers that are fed into vimdiff, they wouldn't have file names to begin with. Maybe you can use bufnr(".") to output the number of the current buffer. Then you can close all buffers past or before a certain number.
You can probably do even more buffer manipulation with certain plugins. I've been considering adopting one of the following three plugins that help manage plugins:
LustyExplorer
FuzzyFinder
minibufexpl
I can't speak for any merits, but I've heard them mentioned several times over the internet and on IRC.
I'm assuming you open vim with a number of arguments (known as... the argument list).
You should probably reset it:
:args %
You can also selectively manage the list (:argdelete). More information: :he arglist
DISCLAIMER: I've not used perforce, so I've had to make an assumption: that when multiple files have uncommitted changes, it will behave like a lot of VCS's and run the configured diff command (in this case, vimdiff) on each changed file in turn (I'm thinking this is what you meant by "opens one by one vimdiff of all changed files").
If this is the case, then vim won't have any references to any of the remaining files when viewing the changes for any particular file, so no amount of trickery within a single vim session is going to help you.
If you are willing to change your workflow at all, you may be able to do something with this vim script I found: http://www.vim.org/scripts/script.php?script_id=240
It claims to be modelled after the P4 GUI, so hopefully could fit neatly into your usage. From the overview of the script, it sounds like it should be able to show you a summary of which files have changed and allow you to view the changes.
If none of this is suitable for you, you could always try the old favourite Ctrl-C immediately after closing a vimdiff session for a file.
This is a bad hack but putting it here as no other answers worked for me.
Add "qall" without qoutes on top of your .vimrc .
:e ~/.vimrc
:source ~/.vimrc
:q
All files will close automatically after opening.
Then open vimrc in emacs or sed and remove qall.
Is there a good project / session manager for vim? A session (or project) is a named lists of files, e.g. "bitonic_sort" could identify files "~/A/bitonic_sort.sk", "~/B/bitonic_sort.smt2", etc.
(rationale) I have a project where I need to edit files from many different locations, and it is too cumbersome to open them manually each time I resume work. (so, it looks like things like nerdtree brought up at this sister question, Favorite (G)Vim plugins/scripts?, won't work). I also need separate sessions (i.e. lists of files) for different projects, not just a recent document list.
After all documents have been loaded as buffers, any enhancements to switching between them is a plus (e.g. start typing a name, and matching documents are displayed). Thanks in advance.
Vim has built-in session manager. To save your current session use:
:mks session1.vim
This basically create a Vim script named session1.vim, which will restore your opened file if you source it or start Vim like this:
vim -S session1.vim
To overwrite your saved sessions, use :mks! your_saved_session.vim. Combine with a custom key map and this will be the solution. For more about Vim session read :help :mks. Vim also has views manager which is quite similar. Read more from: :help :mkview
For switching between buffers, you can use FuzzyFinder; but I prefer this key map:
nmap <C-tab> :bn<CR>
imap <C-tab> <ESC>:bn<CR>i
Add it to .vimrc and I can use Ctrl + Tab to switch between buffers just like Firefox tabs. Hope this help.
I'm not sure exactly what you're asking for... but if you want to turn on tab-completion when opening files in vim, add this to your ~/.vimrc:
" Auto-complete file names after <TAB> like bash does.
set wildmode=longest,list
set wildignore=.svn,CVS,*.swp
Also, take a look at screen. From the man page:
When screen is called, it creates a single window with a shell in it (or the specified command) and
then gets out of your way so that you can use the program as you normally would. Then, at any time,
you can create new (full-screen) windows with other programs in them (including more shells), kill
existing windows, view a list of windows, turn output logging on and off, copy-and-paste text between
windows, view the scrollback history, switch between windows in whatever manner you wish, etc. All
windows run their programs completely independent of each other. Programs continue to run when their
window is currently not visible and even when the whole screen session is detached from the user's
terminal. When a program terminates, screen (per default) kills the window that contained it. If
this window was in the foreground, the display switches to the previous window; if none are left,
screen exits.
It's pretty much like having several xterms open, except unlike graphical xterms you can access your screen session if you access your machine remotely (e.g. by sshing to it). You could leave up several different instances of vim in separate screens with all the files you want open, and just never exit them.
The very basic setup I use is one vim window, one compile window, and one testing/debugging window.
And since we're talking about vim, check out this post: Post your Vim config. Lots of cool tweaks and spiffy stuff in there.
You can try the vim-workspace plugin, its session management features are automated and relatively simple (compared to vim-session): https://github.com/thaerkh/vim-workspace