I successfully installed python 3.8.3 on kali linux. However, i am unable to install idle3. I tried several methods suggested but none work. One of the methods I used was "sudo apt-get install idle3 " the error message it gives me is "E: Unable to locate package idle3". How can I resolve this?
IDLE uses tkinter and is typically installed only when tkinter is. On linux, the separate package is usually python-tk and at least one site claims that this is so on kali. (I searched kali linux python tkinter.) So try the following and if it does not work, look more on the kali-linux site.
sudo apt-get install python-tk
Related
I am trying to set RIDE framework on linux.
I have installed the essential software-
Python2.7.8
pip
RobotFramework 2.8.4
Facing issue while installing wxPython.
sudo yum install python-wxgtk2.8
Gave the following error:
Setting up Install Process
No package python-wxgtk2.8 available.
Error: Nothing to do
same for python-wxgtk3.0
Also tried sudo yum install wxPython
default installed wxPython.x86_64 0:2.8.12.0-1.el6 package and on running ride.py getting below error-
You need to install wxPython 2.8.12.1 with unicode support to run RIDE.
wxPython 2.8.12.1 can be downloaded from http://sourceforge.net/projects/wxpython/files/wxPython/2.8.12.1/
Need proper commands to execute wxPython in linux that successfully executes
ride.py.
I'm trying to configure powertop-2.5 but when I run ./configure I get a "configure: error: libnl and libnl-genl are required but were not found" error
I've run
sudo apt-get install libtool autoconf libnl-dev ncurses-dev pciutils-dev build-essential -y
as was recommended by these guys but I get the same error.
I ran
sudo apt-get install libnl-genl-3-dev
Which replaced the previous libnl file but I still get the config error.
According to this, powertop has (or had) problems with detecting libnl but I can't figure out how to fix it.
I'm currently running Linux username 3.2.0-4-686-pae #1 SMP Debian 3.2.51-1 i686 GNU/Linux
I see you tried libnl-dev, maybe try libnl-3-dev instead:
sudo apt-get install libnl-3-dev libnl-genl-3-dev
Probably the problem is the lack of the pkg-config application in your system (which is used to find the proper dependencies with the configure script). I just have the same problem in a fresh installed Ubuntu 14.04 system, and after installing the pkg-config package the configure script finalized successfully its work. Then I could compile and install the last version (2.6.1) of powertop.
I "solved" my problem by installing powertop-2.0 instead.
The use of pkg-config made the trick. I was able to install Powertop 2.7.
recently i tried to install oracle on my linux with apt (I never used yum before) using fast manual:
http://www.oracle.com/technetwork/articles/servers-storage-admin/ginnydbinstallonlinux-488779.html
And after command:
sudo yum install oracle-rdbms-server-11gR2-preinstall
I got error:
Failed: ca-certificates.noarch 0:2010.63-3.el6_1.5 chkconfig.x86_64 0:1.3.49.3-2.el6 file-libs.x86_64 0:5.04-15.el6 filesystem.x86_64 0:2.4.30-3.el6
initscripts.x86_64 0:9.03.38-1.0.1.el6_4.2
Complete!
And something gone wrong because command like: ps, top are crashing
login#Ass-K55VJ:/etc/yum/repos.d$ ps -e
ps: relocation error: ps: symbol procps_number_version, version _3_2_5 not defined in file libproc-3.2.8.so with link time reference
login#Ass-K55VJ:/etc/yum/repos.d$ top
Segmentation fault (core dumped)
then I tryied to uninstall oracle and dependencies but after command:
sudo yum remove oracle-rdbms-server-11gR2-preinstall
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:
No module named yum
Please install a package which provides this module, or
verify that the module is installed correctly.
It's possible that the above module doesn't match the
current version of Python, which is:
2.6.6 (r266:84292, Jul 10 2013, 06:42:56) [GCC 4.4.7 20120313 (Red Hat 4.4.7-3)]
If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq
So it seems like yum install in my system new libraries but didn't link it correctly? I dont know what do in this moment because it seems like armagedon on my ubuntu...
Does this mean you're on ubuntu and tried to install rpm packages using yum? The manual you used is for Oracle Linux 6, why would you try that on ubuntu?
rpm packages are not compatible with debian based systems like ubuntu, which use deb packages. So you've probably screwed your system big time, overwriting important system libraries with incompatible ones.
If apt-get is still working, then you can try to reinstall (apt-get --reinstall install) the equivalent libraries to the ones mentioned in the install manual you linked to - naming isn't always the same for rpm and deb packages. dpkg -l should help you see which the correct installed libraries are. I'd start with the C libraries (libc) etc.
But if apt-get is screwed also, then you'd need to download the packages manually from an ubuntu mirror and install them using dpkg, but I think a reinstall (or restore from backup if you have one) would be the best option.
I'm currently migrating to new computer and I need to reinstall the software I am using which are:
Python 3.3,
Lighttpd (newest version),
Pymongo (newest version),
Ubuntu 12.04 Desktop (The System I'm using)
I started to install Python 3.3 by downloading it from the its official website (in tar.bz2 file) and by following this tutorial. Afterwards I installed Lighttpd and changed the lighttpd.conf for Python by following this tutorial, too.
I tried several paths for my cgi.assign, none of them worked. Especially /opt/python3.3/bin/python3.3 should be working, but it shows 500 - internal Server error all the time with a "hello world" test script.
Now regardless to this problem I have no clue on installing Pymongo. If I try to intall pip OR easy_install python3.3 I have to manually download it and execute the setup.py with my python3.3 executable, right? Because this always fails with an error:
`Error missing zlib on a bundle called distribute-0.7.3 (is this even the right tool I need, because it seems to be a legacy wrapper !?) or unknown url type: https for pymongo2.6.2 itself.`
I'm getting crazy with this setup. Why is this so difficult to handle? Other programs are just a few clicks to install even on a system like Ubuntu, but these particular development tools seem to be really difficult to install.If anybody has an idea on how to install all three together or has information on a better solution please help me out.
The system is used to program Python scripts in Eclipse and trying them out directly on the system (lighttpd). The database used is MongoDB. Python and MongoDB are communicating over the Pymongo driver. I am planning to use the system on a Server distribution on release and it has to be nicely scalable on a high amount of excecutions.
Thanks for your time,
It's easiest to use the Ubuntu repositories:
sudo apt-get update
sudo apt-get install python3 python3-pip lightppd python-pymongo
Or if that only installs the python2.x pymongo, use pip, which you've just installed:
sudo pip-3.3 install pymongo
Or better yet, use a virtualenv with the help of virtualenvwrapper (docs)
sudo pip install virtualenvwrapper
... # follow instructions for installing virtualenvwrapper
mkvirtualenv --python=/usr/bin/python3 -i pymongo mongoppd
workon mongoppd
... which will segregate the environment I've called 'mongoppd' from the rest of your system so you can't cause any trouble. Then you don't need sudo to pip-3.3 install things, just workon mongoppd then pip-3.3 install [...]. Or after the -i flag when you create the virtualenv to get it installed straight away.
In general, on Ubuntu, you should hardly ever have to install something manually. Your first attempt should be using sudo apt-get install (use tab-complete to see what's available or just google "ubuntu 12.04 packages [...]" and you'll find the list of packages). Then for python use pip install or pip-3.3 install as appropriate. You'll only need to run python setup.py install if you need to install a development version of a package or something obscure that's not on pip. I don't think there's a good reason to ever use easy_install these days.
I installed Ubuntu 11.10, installed GNOME 3 (replaced Unity), installed Eclipse from the Ubuntu Software Center, installed the android sdk and ADT.
Now when I start eclipse I get a message saying:
Failed to get ADB version : Cannot run program
/home/ayush/android-sdk/platform-tools/adb":java.io.IOException:error=2,
No such file or directory
What is causing this error and how do I fix it?
The command to install IA32 libraries on Ubuntu is:
apt-get install ia32-libs
sudo dpkg --add-architecture i386
sudo apt-get update
apt-get install ia32-libs
Before that please check your ubuntu version. if you are running with 64 bits, you need to install a linux emulator, IA32 bit I thinks. Verify on Google.
after that, your ADB can run easily on ubuntu.
I'm using Fedora 17 and I got the same error as the poster:
[2013-08-29 21:44:08 - adb] Unexpected exception 'Cannot run program
"/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb":
error=2, No such file or directory' while attempting to get adb version from
'/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb'
I know this works if you are using Fedora 17/18 (login as root)
yum install redhat-lsb.i686
And then restart the IDE and the errors no longer show.
I had the exact same error as you had, but on my Ubuntu 12.04 LTS version.
The following avoided that error for me:
1) Install 'adb' and 'fastboot' provided by the following third-party PPA.
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
2) Replace the copy of 'adb' and 'fastboot' provided by the official Android SDK with those installed from the above step:
cp /usr/bin/adb <path-to-your-adt-sdk-package>/sdk/platform-tools/adb
cp /usr/bin/fastboot <path-to-your-adt-sdk-package>/sdk/platform-tools/fastboot
3) Restart(re-execute) your eclipse binary.
Full credits:
http://www.webupd8.org/2012/08/install-adb-and-fastboot-android-tools.html
They have the binaries for 12.10, 11.10 and 11.04 as well.
Don't try to install ia32-libs, this library has been obsoleted.
So, you should install these libraries:
sudo apt-get install libc6-i386 lib32stdc++6 lib32gcc1 lib32ncurses5
Cheers