I am probably just having a brain fart, but I can not for the life of me figure out how to loop through an array in shell script, not bash. Im sure the answer is on stackoverflow somewhere already, but I can not find a method of doing so without using bash. For my embedded target system bash is not currently an option. Here is an example of what I am attempting to do and the error that is returned.
#!/bin/sh
enable0=1
enable1=1
port=0
while [ ${port} -lt 2 ]; do
if [ ${enable${port}} -eq 1 ]
then
# do some stuff
fi
port=$((port + 1))
done
Whenever I run this script the error "Bad substitution" is returned for line with the if statement. If you guys have any ideas I would greatly appreciate it. Thanks!
a="abc 123 def"
set -- $a
while [ -n "$1" ]; do
echo $1
shift
done
Output via busybox 1.27.2 ash:
abc
123
def
BusyBox provides ash which does not directly provide array support. You could use eval and something like,
#!/bin/busybox sh
enable0=0
enable1=1
for index in 0 1 ; do
eval assign="\$enable$index"
if [ $assign == 1 ]; then
echo "enable$index is enabled"
else
echo "enable$index is disabled"
fi
done
One could use positional parameters for that...
http://pubs.opengroup.org/onlinepubs/009696799/utilities/set.html
#!/bin/sh
enable0=0
enable1=1
set -- $enable0 $enable1
for index in 0 1; do
[ "$1" -eq 1 ] && echo "$1 is enabled." || echo "$1 is disabled."
shift
done
Running on busybox:
~ $ ./test.sh
0 is disabled.
1 is enabled.
It's best not to use eval unless there is no other alternative. (The recent spate of bash exploits is due to the shell internally evaling the contents of environment variables without verifying their contents first). In this case, you seem to be in complete control for the variables involved, but you can iterate over the variable values without using eval.
#!/bin/sh
enable0=1
enable1=1
for port_enabled in "$enable0" "$enable1"; do
if [ "$port_enabled" -eq 1 ]; then
# do some stuff
fi
done
I have tried and tried to solve this and with my limited knowledge of BASH i cannot, I have searched but cannot find anything relating to my issue.
COMMAND_WAIT=$(curl --data "SERIAL_NUMBER="$SERIALNUMBER"" h**p://SERVER/device_check_in.php)
echo $COMMAND
if [ "$COMMAND_WAIT" == "REBOOT" ]; then
echo "Reboot Scheduled"
else
echo "Nothing Found"
fi
I have included an echo command of "COMMAND_WAIT" and this displays "REBOOT" as expected but the if statement will just not work?
Try echoing
echo ">>$COMMAND_WAIT<<"
and see if you have any padding. That might be the culprit.
I prefer to use [[]] instead of [] since [ is a builtin (a command) while [[ is a keyword (see bash manual for more details).
if [[ "$VAR" == "VALUE" ]]
then
echo "true";
else
echo "false";
fi
If it's trailling whitespaces, there's many way to skin that cat like suggested here
I am attempting to find a binary file in a Linux system using something like this:
if [ -f `which $1` ] then
echo "File Found"
else
echo "File not Found"
fi
while the code works fine the problem is "which" will return a null operator which BASH interprets as something existing so a file always comes back found. Any suggestions would be great.
Thanks
Update
After a bit more thought, there is no reason to use [[ ]] (or [ ] for that matter). There is even no reason to use command substitution either $()
if which "$1" > /dev/null 2>&1; then
echo "found"
else
echo "not found"
fi
If you're using bash then please use the [[ ]] construct. One of the benefits (among many) is that it doesn't have this problem
[[ -f $(which $1) ]] && echo found
Also, `` is deprecated, use $() instead
if [ `which "$1"` != "" ]; then
which won't return "" when it finds the binary.
I like 'hash' for this (if you're a bash user..) (and it's actually more portable behavior than which)
hash blahblah
bash: hash: lklkj: not found
hash /bin/ls <-- silently successful
This method works on Linux and OSX similarly, where-as 'which' has different behavior.
I programmed a small installation program in sh.
code:
#!/bin/sh
echo $ 1
if [ "$1" ! = "install"];
then
echo "Why not install?
else
echo "Installing ..."
fi
And throws an error:
install
[: 10: missing ]
Installing ...
EDIT: Rolled back incoperation of answers into question.
if [$1 != "install"];
should be
if [ "$1" != "install" ];
Multiple problems here
The first line should start with
#!/bin/bash (or /bin/sh)
In shell script if takes a program, and [ is actually a program (it is an alias for the test program), and not a part of the syntax, so you need to make sure you space it out so that if and the '[' and anything out is separated out -- i.e.
if [ "$1" != "something" ]
Note the spaces between each and every element -- it will not work without spaces.
You also need to terminate your quoted strings, so instead of
echo "Why not install?
Make sure you have the quote at the end of line
echo "Why not install?"
On my terminal in Ubuntu, I often run programs which keep running for a long time. And since there are a lot of these programs, I keep forgetting which terminal is for which program, unless I tab through all of those. So I wanted to find a way to update my terminal title to the program name, whenever I run a command. I don't want to do it manually.
I use gnome-terminal, but answer shouldn't really depend on that. Basically, If I'm able to run a second command, then I can simply use gconftool command to update the title. So I was hoping to find a way to capture the command in bash and update the title after every command. How do I do that?
I have some answers for you :) You're right that it shouldn't matter that you're using gnome-terminal, but it does matter what command shell you're using. This is a lot easier in zsh, but in what follows I'm going to assume you're using bash, and that it's a fairly recent version (> 3.1).
First of all:
Which environment variable would
contain the current 'command'?
There is an environment variable which has more-or-less what you want - $BASH_COMMAND. There's only one small hitch, which is that it will only show you the last command in a pipe. I'm not 100% sure what it will do with combinations of subshells, either :)
So I was hoping to find a way to
capture the command in bash and update
the title after every command.
I've been thinking about this, and now that I understand what you want to do, I realized the real problem is that you need to update the title before every command. This means that the $PROMPT_COMMAND and $PS1 environment variables are out as possible solutions, since they're only executed after the command returns.
In bash, the only way I can think of to achieve what you want is to (ab)use the DEBUG SIGNAL. So here's a solution -- stick this at the end of your .bashrc:
trap 'printf "\033]0;%s\007" "${BASH_COMMAND//[^[:print:]]/}"' DEBUG
To get around the problem with pipes, I've been messing around with this:
function settitle () {
export PREV_COMMAND=${PREV_COMMAND}${#}
printf "\033]0;%s\007" "${BASH_COMMAND//[^[:print:]]/}"
export PREV_COMMAND=${PREV_COMMAND}' | '
}
export PROMPT_COMMAND=${PROMPT_COMMAND}';export PREV_COMMAND=""'
trap 'settitle "$BASH_COMMAND"' DEBUG
but I don't promise it's perfect!
Try this:
trap 'echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"' DEBUG
Thanks to the history 1 it works even with complicated expressions like:
true && (false); echo $? | cat
For which approaches relying on $BASH_COMMAND or $# fail. For example simon's displays:
true | echo $? | cat
Thanks to Gilles and simon for providing inspiration.
I see what stoutie is trying to do, except it's a lot more work than needed. And doesn't cause all sorts of other potentially bad things that can occur as a result of redefining 'cd' and putting in all of that testing just to change directories. Bash has built in support for most of this.
You can put this in your .bashrc anywhere after you set your current PS1 prompt (this way it just prepends it)
# If this is an xterm set the titlebar to user#host:dir
case "$TERM" in
xterm*|rxvt*)
PS1="\[\e]0;\u#\h: \w\a\]$PS1"
;;
*)
;;
esac
The OP asked for bash, but others might be interested to learn that (as mentioned above) this is indeed a lot easier using the zsh shell. Example:
# Set window title to command just before running it.
preexec() { printf "\x1b]0;%s\x07" "$1"; }
# Set window title to current working directory after returning from a command.
precmd() { printf "\x1b]0;%s\x07" "$PWD" }
In preexec, $1 contains the command as typed (requires shell history to be enabled, which seems to be a fair assumption), $2 the expanded command (shell aliases etc.) and $3 the "very expanded" command (shell function bodies). (more)
I'm doing something like this, to show my pwd in the title, which could be modified to do whatever you want to do with the title:
function title { echo -en "\033]2;$1\007"; }
function cd { dir=$1; if [ -z "$dir" ]; then dir=~; fi; builtin cd "$dir" && title `pwd`; }
I just threw this in my ~/.bash_aliases.
Update
I ran into strange bugs with my original answer. I ended up picking apart the default Ubuntu PS1 and breaking it into parts only to realize one of the parts was the title:
# simple prompt
COLOR_YELLOW_BOLD="\[\033[1;33m\]"
COLOR_DEFAULT="\[\033[0m\]"
TITLE="\[\e]0;\u#\h:\w\a\]"
PROMPT="\w\n$ "
HUH="${debian_chroot:+($debian_chroot)}"
PS1="${COLOR_YELLOW_BOLD}${TITLE}${HUH}${PROMPT}${COLOR_DEFAULT}"
Without breaking into variables, it would look like this:
PS1="\[\033[1;33m\]\[\e]0;\u#\h:\w\a\]${debian_chroot:+($debian_chroot)}\w\n$ \[\033[0m\]"
I have tested three method, all is OK, use any one for your pleasure.
export PROMPT_COMMAND='echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"'
trap 'echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"' DEBUG
trap 'echo -ne "\e]0;"; echo -n $BASH_COMMAND; echo -ne "\a"' DEBUG
please note if use $BASH_COMMAND, it don't recognize bash alias, and use PROMPT_COMMAND show finished command, but use trap show running command.
Based on the the need to auto position putty windows I have modified my /etc/bash.bashrc file on a Debian/Ubuntu system. I have posted the full contents for completeness but the relevant bit to starts on the # Display command ... comment line.
# System-wide .bashrc file for interactive bash(1) shells.
# To enable the settings / commands in this file for login shells as well,
# this file has to be sourced in /etc/profile.
# If not running interactively, don't do anything
[ -z "$PS1" ] && return
# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize
# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
debian_chroot=$(cat /etc/debian_chroot)
fi
# set a fancy prompt (non-color, overwrite the one in /etc/profile)
PS1='${debian_chroot:+($debian_chroot)}\u#\h:\w\$ '
# Display command run in title which allows us to distinguish Kitty/Putty
# windows and re-position easily using AutoSizer window utility. Based on a
# post here: http://mg.pov.lt/blog/bash-prompt.html
case "$TERM" in
xterm*|rxvt*)
# Show the currently running command in the terminal title:
# http://www.davidpashley.com/articles/xterm-titles-with-bash.html
show_command_in_title_bar()
{
case "$BASH_COMMAND" in
*\033]0*)
# The command is trying to set the title bar as well;
# this is most likely the execution of $PROMPT_COMMAND.
# In any case nested escapes confuse the terminal, so don't
# output them.
;;
*)
echo -ne "\033]0;${USER}#${HOSTNAME}: ${BASH_COMMAND}\007"
;;
esac
}
trap show_command_in_title_bar DEBUG
;;
*)
;;
esac
# Commented out, don't overwrite xterm -T "title" -n "icontitle" by default.
# If this is an xterm set the title to user#host:dir
#case "$TERM" in
#xterm*|rxvt*)
# PROMPT_COMMAND='echo -ne "\033]0;${USER}#${HOSTNAME}: ${PWD}\007"'
# ;;
#*)
# ;;
#esac
# enable bash completion in interactive shells
if ! shopt -oq posix; then
if [ -f /usr/share/bash-completion/bash_completion ]; then
. /usr/share/bash-completion/bash_completion
elif [ -f /etc/bash_completion ]; then
. /etc/bash_completion
fi
fi
# if the command-not-found package is installed, use it
if [ -x /usr/lib/command-not-found -o -x /usr/share/command-not-found/command-not-found ]; then
function command_not_found_handle {
# check because c-n-f could've been removed in the meantime
if [ -x /usr/lib/command-not-found ]; then
/usr/bin/python /usr/lib/command-not-found -- "$1"
return $?
elif [ -x /usr/share/command-not-found/command-not-found ]; then
/usr/bin/python /usr/share/command-not-found/command-not-found -- "$1"
return $?
else
printf "%s: command not found\n" "$1" >&2
return 127
fi
}
fi
You can set up bash such that it sends a certain escape sequence to the terminal every time it starts an external program. If you use the escape sequence that terminals use to update their titles, your problem should be solved.
I have used that before, so I know it is possible. but I cannot remember it off the top of my head and do not have time to research the details right now, though.
Some of the old methods were removed from gnome-terminal 3.14 due to these two bugs (724110 and 740188).
In Ubuntu 20.04
PS1=$PS1"\[\e]0;New_Terminal_Name\a\]"
\[ begin a sequence of non-printing characters
\e]0; is the char sequence for setting the terminal title. Bash identifies this sequence and set the tile with the following characters. Number 0 turns out to be the value to reference the title property.
New_Terminal_Name is the tile we gave
\a is the ASCII bell character, also in this case, it marks the end of the tile to read from Bash.
\] end a sequence of non-printing characters
We can create a function for future use
function set_title(){
if [ -z "$PS1_BACK" ]; # set backup if it is empty
then
PS1_BACK="$PS1"
fi
TITLE="\[\e]0;$*\a\]"
PS1="${PS1_BACK}${TITLE}"
}
Open the ~/.bashrc file in your home directory with a text editor and append the above function at the end of it. Save and close.
To use it immediately source it to the current terminal.
source ~/.bashrc
We can use it then like this
set_title <New terminal tab title>
My terminal window titler script
This dynamic backgrounded script show all running command with pid number and elapsed time in seconds, like if I run du -h | less, this will build title looking like:
204640 6 du -h | 204641 6 less
Then when no command (other than himself) are running, don't change the terminal title, so standard behaviours works normaly.
First run start backgroud task. Second run in same terminal ask for kill previous backgrounded task.
Save this into a file, set execute flag then run it without argument:
cat <<"EOF" >titleWin.sh
#!/bin/bash
## Ask for kill process if already started
mapfile -t pids < <(ps -C ${0##*/} ho pid)
for pid in ${pids[#]} ;do
if [[ $pid != $$ ]] && [ -d /proc/$pid ]; then
echo -n "STARTED: [$pid]: ${0##*/}. Kill them (Y/n)? "
read -rsn 1 act
case $act in
n|N ) echo No;;
* ) echo Yes;kill $pid ;;
esac
exit
fi
done
## Title win for xterm or screen (or tmux).
case $TERM in
xterm*|rxvt* ) titleFmt='\e];%s\a';;
screen* ) titleFmt='\ek%s\e\\';;
* ) echo "Unable to title window.";exit 1;;
esac
tty=$(tty)
## Date to epochseconds converter
exec {dateout}<> <(:)
exec {datein}> >(exec stdbuf -o0 date -f - +%s >&$dateout)
DPID=$!
trap "echo TRAP;kill $DPID" 1 2 3 6 9 15
# Main loop
while :;do
string=""
while read -r pid wday mon day time year cmd; do
if [[ $pid != $$ ]] && [[ $pid != $PPID ]] && [[ $pid != $BASHPID ]] &&
[[ $pid != $DPID ]] && [ "${cmd#*pid,lstart,cmd}" ] &&
[ -d /proc/$pid ] ;then
echo >&${datein} $wday $mon $day $time $year
read -ru $dateout date
string+="$pid $((EPOCHSECONDS-date)) $cmd | "
fi
done < <(exec ps --tty ${tty#*/dev/} ho pid,lstart,cmd)
[[ "$string" ]] && printf "$titleFmt" "${string% | }"
sleep .333
done &
EOF
chmod +x titleWin.sh
./titleWin.sh