I wonder if somebody could help me complete the vba code. What I want to do is to Compare two values in two different columns (Correct, Compare). If they are equal you should copy a value from third column (Rank) into a fourth column (Output).
The "group of Compare" is 39 rowsThe "group of Rank" is 39 rowsThe "group of Correct" is 13 rowsThe "group of Output" is 13 rows So the first loop is Compare (row 2-40), Rank (row 2-40), Correct (row 2-14),Output (row 2-14). Second loop Compare (row 41-79), Rank (row 41-79), Correct (row 15-27),Output (row 15-27) and so on.
This code works for the first loop. After that it gets wrong.
Private Sub CommandButton3_Click()
Dim LastRow
Dim i
LastRow = Cells(Rows.Count, "F").End(xlUp).Row
For i = 2 To LastRow
Cells(i, 7) = Application.WorksheetFunction.VLookup(Cells(i, 6), Columns("D:E"), 2, 0)
Next i
End Sub
Attached below is an image of example data.
If I understand correctly, you want to copy values from Rank to Output if Compare and Correct are equal. I think all you need in this case is a simple IF statement:
For i = 2 to 26 'I am basing these numbers off the spreadsheet, but you could use
variables here from earlier in your code.
If Cells(i, 4) = Cells(i, 6) Then 'Column 4 and 6 are Compare and Correct,
respectively.
Cells(i, 7) = Cells(i, 5) 'Column 7 and 5 are Output and Rank respectively.
Next i
Going by the image you added, wouldn't it be easier to just use VLOOKUP? You will get the same results as the IFS you used.
Try this:
Private Sub CommandButton2_Click()
LastRow = Cells(Rows.Count, "F").End(xlUp).Row
For i = 2 To LastRow
Cells(i, 7) = Application.WorksheetFunction.VLookup(Cells(i, 6), Columns("D:E"), 2, 0)
Next i
End Sub
The LastRow gets the last cell of the column "Correct", so we know how many times the macro will have to go trough the loop.
Next we have a For loop which goes (in your example) from 2 till 14.
Inside the loop there is a VLOOKUP function that compared value from column Correct with column Compare, and if there is a match it returns value of the column Rank for the 1st match.
Related
I have two sheets :
Sheet 1 consist of :
Sheet 2 consist of :
And the output should show in M column in Sheet1. I am attaching the sample output here :
So,what I have here is ID in Sheet 1, for eg : ID 'US' has Abhay,Carl and Dev
and in Sheet3, I have names in column and ID in Rows.
What i want is my Sample output column should populate using macro based on matched values from Sheet3
I am using below logic but something is going wrong :
For i = 2 To 10
j = i + 1
If ThisWorkbook.Sheets("Input").Range("N" & i) = ThisWorkbook.Sheets("Sheet3").Range("A" & i) And ThisWorkbook.Sheets("Input").Range("K" & i) = ThisWorkbook.Sheets("Sheet3").Range("B1") Then
ThisWorkbook.Sheets("Input").Range("O" & i) = ThisWorkbook.Sheets("Sheet3").Range("B" & j)
End If
Next i
Since you asked for a VBA solution, please see the code below.
Dim colLen As Integer
Dim i As Integer
Dim colPt As Integer
Dim rowPt As Integer
' Counts number of rows on Sheet 1, column B.
colLen = Sheets(1).Cells(Rows.Count, "B").End(xlUp).Row
' Loops through all names on Sheet 1.
For i = 2 To colLen
' Retain US or NA ID for blank cells.
If Sheets(1).Cells(i, 1) <> "" Then
If Sheets(1).Cells(i, 1) = "US" Then
colPt = 2
Else
colPt = 3
End If
End If
' Find name on Sheet 2 and set row.
rowPt = Sheets(2).Range("A:A").Find(Sheets(1).Cells(i, 2)).Row
' Add ID from Sheet 2 to Sheet 3
Sheets(1).Cells(i, 3) = Sheets(2).Cells(rowPt, colPt)
Next i
Assumptions:
Sheet 1 is the main worksheet, sheet 2 has the lookup data.
All names in the lookup data are unique.
I would recommend including the ID in every row instead of treating it as a heading but that's preference. There are formula solutions that would work for this as well if you want to skip VBA.
There are a few ways to approach this. Below is one of them:
NOTE: for simplicity, I have kept my data on one sheet. You can amend the below formulas as your data is on 2 sheets. Saying that, I have used the same columns as you have in your query
Solution:
Have a "holding column". In my example, I used column J as the holding column (you can hide this column if you want). In J2, type the following formula: =IF(ISBLANK($K2), $J1,$K2). Copy the formula down to all used rows. Then copy the following formula in M2: =VLOOKUP($L2,$A$3:$C$8,IF($J2="US",2,3),FALSE). As per before, copy the formula down to all used rows. This should give you your results
I am relatively new to Macros and VBA in Excel, so I need some guidance on how to solve my current issue.
The end goal of my project is to have a macro compare two sets of data organized into rows and columns (We'll say table A is the source data, and table B is based off of user input). Each row in table B should correspond to a row in table A, but they could be out of order, or there could be incorrect entries in table B.
My thought is that for the first row in each table, the macro would compare each cell left to right:
If Sheets("sheet1").Cells(2, 1) = Sheets("sheet2").Cells(2, 1) Then
If Sheets("sheet1").Cells(2, 2) = Seets("sheet2").Cells(2, 2)
Ect, ect.
My problem comes in when the Cell in table B does not match Table A.
First, I would want it to check B row 1 against the next row in A, and keep going throughout table A until it finds a "complete match" with all five columns of the row matching.
I've been trying to do this with Else if and For/Next staements
For row= 2 to 10
'if statements go here
Else If Sheets("sheet1").Cells(2, 1) <> Sheets("sheet2").Cells(2, 1)
Next row
I may be completely misunderstanding the syntax here, but I have yet to produce a situation where if the criteria is not met, it goes to the next row.
If no complete match is found, the last cell in table B row 1 that couldn't be matched should be highlighted.
Then regardless of whether a match was found or not, we would move to table B row 2, and start the whole process over.
So, I have the logic worked out (I think), where the comparison ifs would be inside a loop (or something) that would cycle through table A row by row. Then that whole process would be in another loop (or something) that would cycle through Table B.
At the end of the process, there would either be no highlighted cells showing that all entered data is correct, or cells would be highlighted showing data that do no match.
I am fairly certain that the cycling through table B is not the issue. Rather, I'm having difficulty getting the Macro to move to the next table A row if something doesn't match.
Please let me know if I need to elaborate on anything.
Thanks!
You could try:
Option Explicit
Sub test()
Dim Lastrow1 As Long, Lastrow2 As Long, i As Long, j As Long
Dim Str1 As String, Str2 As String
'Find the last row of sheet 1
Lastrow1 = Sheet1.Cells(Sheet1.Rows.Count, "A").End(xlUp).Row
'Find the last row of sheet 2
Lastrow2 = Sheet2.Cells(Sheet2.Rows.Count, "A").End(xlUp).Row
For i = 2 To Lastrow1
'Let us assume that table has 3 columns. Merge 3 columns' values and create a string for each line
Str1 = Sheet1.Cells(i, 1).Value & "_" & Sheet1.Cells(i, 2).Value & "_" & Sheet1.Cells(i, 3).Value
For j = 2 To Lastrow2
'Let us assume that table has 3 columns. Merge 3 columns' values and create a string for each line
Str2 = Sheet2.Cells(j, 1).Value & "_" & Sheet2.Cells(j, 2).Value & "_" & Sheet2.Cells(j, 3).Value
'If both strings match a message box will appear
If Str1 = Str2 Then
MsgBox "Line " & i & " in table A match with line " & j & " in table B!"
Exit For
End If
Next j
Next i
End Sub
Sheet 1 structure:
Sheet 2 structure:
I have a data sheet where column B is a list of data types. The only value I care about is if the value is SIS.
If row 2 has the value SIS in column B and row 3 has the value SIS in column B, then delete row 2. If row 3 contained instead a value of Topic, then keep row 2, ignore row 3, and look at row 4.
The attached image shows the sample data with a column called VBA Instructions. Any help is appreciated.
I think the below could work, this is testing if the cell in front has the same value as the current cell, if so then it would delete it. I would copy the dataset into another sheet before running a macro which deletes rows. The only problem with the below code is if you have two "Topic" cells right next to each other, for example if "Topic" tags were in rows 3 and 4 then row 3 would be deleted.
Sub test()
Columns("A:A").Insert Shift:=xlToRight
last = Cells(Rows.Count, 3).End(xlUp).Row
For Each Cell In Range("C2:C" & last)
If (Cell = Cells(Cell.Row + 1, 3)) = True Then
Range("A" & Cell.Row).Value = True
Else:
Range("A" & Cell.Row).Value = False
End If
Next Cell
For x = 2 To last:
If Cells(x, 1) = True Then
Rows(x).Delete
x = x - 1
End If
Next x
Columns("A:A").Delete
End Sub
I have files of data with the following format:
In column A, identifiers occur either doubly (e.g. 302_60) or singularly (e.g.310_58). Additional information is present in column B.
What I want to do is:
tag the rows that have single identifiers in column A with
TRUE/FALSE in Column C
for any TRUE tag, insert a line BELOW
copy into the inserted row the contents of the ENTIRE tagged row (here just columns A,B)
I solved #1 using =COUNTIF(A:A, A1)=1
I then wrote a VBA script to solve #2
Sub ins_below_and_copy()
Dim c As Range
For Each c In Range("C1:C100")
If InStr(1, c, "TRUE", vbTextCompare) > 0 Then
Rows(c.Offset(1, 0).Row & ":" & c.Offset(1, 0).Row).Insert Shift:=xlDown
End If
Next c
End Sub
Achieving the desired end result (#3)
seems simple enough, right? I have been trying .Copy and .Paste commands, but keep getting type-mismatch errors, an error that does not make sense to me (since I am not a competent VBA coder). Any ideas?
You have down all the hard work, filling in the gaps is easy. Select the two columns, HOME > Editing - Find & Select, Go To Special..., Blanks, OK, =, UP and Ctrl+Enter.
You can run this after you have your empty rows created.
Dim sheet As String
Dim lastRow As Long
sheet = "SheetName"
lastRow = Sheets(sheet).Range("A" & Rows.Count).End(xlUp).Row
For r = 2 To lastRow 'Assuming you have a Header Row
If Sheets(sheet).Cells(r, 1) = "" Then
Sheets(sheet).Cells(r - 1, 3) = "FALSE"
Sheets(sheet).Cells(r, 1) = Sheets(sheet).Cells(r - 1, 1)
Sheets(sheet).Cells(r, 2) = Sheets(sheet).Cells(r - 1, 2)
Sheets(sheet).Cells(r, 3) = Sheets(sheet).Cells(r - 1, 3)
End If
Next r
I'm trying to get excel to put together a series of text strings that haven't been formatted systematically, so that they end up split into different rows on a data sheet.
I'm aware this might've been solved elsewhere so sorry for that but I'm struggling to describe the issue, and I can't post images on it but basically it's
Column 1 with a list of the entries, and
Column 2 with text strings that are spread over 2 or more rows
Is it possible to write some kind of formula or macro that would be able to check the first column and then stitch together all entries in the second column going down until it found a new entry in the first column? I've got a feeling it might be possible using some sort of loop thing with index functions, but I've no idea where to start even.
Thanks,
Mike
Mike give this a ty
Sub appendValues()
'The sub is designed to loop through code and when ever there is a null value and column a it will take the value of what is in column B and appended to the row above it and delete the row.
Dim row As Integer
row = 1
'This code starts with row one but this can be changed at will.
Do Until ThisWorkbook.Sheets("sheet1").Cells(row, 2).Value = ""
'loop statement is designed to continue to Loop until there is a null value inside of you the value in the second column.
If ThisWorkbook.Sheets("sheet1").Cells(row, 1).Value = "" Then
ThisWorkbook.Sheets("sheet1").Cells(row - 1, 2).Value = ThisWorkbook.Sheets("sheet1").Cells(row - 1, 2).Value & ThisWorkbook.Sheets("sheet1").Cells(row, 2).Value
Rows(row).Delete
Else
'else statement is needed because there is an implied looping by decreasing the total number of rows after the delete.
row = row + 1
End If
Loop
End Sub
Sub appendValues()
'The sub is designed to loop through code and when ever there is a null value and column a it will take the value of what is in column B and appended to the row above it and delete the row.
Dim row As Integer
row = 1
'This code starts with row one but this can be changed at will.
Do Until ThisWorkbook.Sheets("sheet1").Cells(row, 2).Value = ""
'loop statement is designed to continue to Loop until there is a null value inside of you the value in the second column.
If ThisWorkbook.Sheets("sheet1").Cells(row, 1).Value = "" Then
ThisWorkbook.Sheets("sheet1").Cells(row - 1, 2).Value = ThisWorkbook.Sheets("sheet1").Cells(row - 1, 2).Value & ThisWorkbook.Sheets("sheet1").Cells(row, 2).Value
Rows(row).Delete
Else
'else statement is needed because there is an implied looping by decreasing the total number of rows after the delete.
row = row + 1
End If
Loop
End Sub