I made a python script on linux, which uses the pulsectl library and it works just fine. When I tried to run it on windows i got an error: FileNotFoundError: Could not find module 'libpulse.so.0' (or one of its dependencies). Try using the full path with constructor syntax.. I have pulsectl installed on both systems. I searched for the file on multiple sites, but I couldn't find anything. Not even a single thread about this error. Here is the traceback message: https://pastebin.pl/view/17da8815
Ok, I found a solution. If anybody has the same problem, go to this site, download the preview binaries, extract items, open the bin folder and then copy all the items to your C:\Windows folder. If asked for permission from UAC just click 'Allow'. And that's it.
Related
I am trying to make haskell-linter to work on VS Code on my windows 10 machine. Apparently you need to add a path to the .exe file for it to work. I get this error message.
Cannot hlint the haskell file. The hlint program was not found. Use the 'haskell.hlint.executablePath' setting to configure the location of 'hlint'
In the Dependencies options there is following information.
It expects a version of hlint >= 1.9.1 to be installed and already added to >the path. If it is installed but cannot be found, add the path to your >preferences as seen below"
"haskell.hlint.executablePath": "Path\To\Executable"
I tried adding a path in the system environment as such.
Variablename: haskell.hlint.executablePath
Variablevalue: C:\Users\name\.vscode\extensions\hoovercj.haskell-linter-0.0.6\node_modules\.bin
I am fairly sure the variable value is the thing wrong here. I think I need to find the path to the .exe file for for the extension, but I can't seem to find it in the folder containing the extension itself. There is probable an easy fix that I am just to inexperienced to see. Please help, and if you do, explain it as if I was 8. :)
Edit 1: I now know where to put the path to what i assume must be the .exe file for Haskell-linter, however i don't know where that file is. As stated i cant find any .exe files in the extension folder.
Edit 2: I reinstalled hlint and added the new path. it finally seems to work as intended.
I took to heart the message that support for anaconda2 was dropped. I installed anaconda3 and used 2to3 to convert my *.py codes. Everything seemed to work as expected. I have several 2 line bat codes that cd to a particular directory and then call python to execute a particular *.py code in that directory. By loading Anaconda Prompt(Anaconda3) and invoking the bat file I could run pythons in that directory as expected.
Then, a couple of days ago, I made such a run and got an error message saying the *.py file could not be found. I immediately looked in the directory and the python file was there as expected. I then did a dir command in Anaconda Prompt(Anaconda3) and found that almost no files in the directory were listed. This was happening on my windows 10 laptop.
On my desktop, everything continues to work as expected. Are there any suggestions as to what could cause such a problem and how to fix it.
Thanks,
Mack Elrod
Responding to the request for additional information, I have a bin directory that is in path. In bin\MackData.bat is
c:
cd %USERPROFILE%\Documents\Medev\MackData
copy sugarhist.png sugarhist.old.png
python MackData.py
When I open Anaconda Prompt(Anaconda3) and enter MackData I get
(base) C:\Users\Mack>MackData
(base) C:\Users\Mack>c:
(base) C:\Users\Mack>cd C:\Users\Mack\Documents\Medev\MackData
(base) C:\Users\Mack\Documents\Medev\MackData>copy sugarhist.png sugarhist.old.png
1 file(s) copied.
(base) C:\Users\Mack\Documents\Medev\MackData>python MackData.py
python: can't open file 'MackData.py': [Errno 2] No such file or directory
(base) C:\Users\Mack\Documents\Medev\MackData>
But MackData.py is a python file in the directory MackData.
This code worked on this laptop until a few days ago and continues to work on my desktop computer. I can, of course, publish MackData.py but that seems irrelevant. The point is that Anaconda can't find it.
Thanks,
Mack
I must submit a sincere apology to this community. I have determined my problem and Anaconda is not responsible in any way. I thank all of you for you concerns and comments.
For any who might be interested I will give a brief outline of what happened. First, I installed Anaconda3. Several days later my directory, MackData, was moved to a new location. I conjecture that happened by me inadvertently letting my hand drag on the touch pad. Then, not knowing the location had changed I updated my laptop from my desktop. My update program not finding MackData where expected recreated it and put only the most recently changed files from the desktop into the new MackData. New but in the correct location. Then of course running my script in the Anaconda3 prompt failed. Doing a dir in the Anaconda3 prompt showed only a few files were there. I then went to Windows File Explore and looked at MackData and saw all of the expected files. I used the quick access feature which unknown to me pointed to the old directory in its new location.
That is not intended to be an excuse but only as an explanation. Again, I do apologize to the community.
Mack Elrod
I'm pretty sure newer anaconda launchers users different environment paths, and not even windows ones.
I suggest either checking the environment path within the anaconda launcher and configurations or, a better solution in my opinion, run these scrips using the regular python engine, without using anaconda (simpler, more determinant and works within your standard environment)
So, I have installed cpplint in Sublime 3 via the Package Control, in a Windows 8.1 64bits machine.
However, it seems that cpplint cannot be found, as discussed in this troubleshooting page:
http://www.sublimelinter.com/en/latest/troubleshooting.html
More specifically, the page says that:
If the result says that the linter could not be found, that means the linter executable is in a directory which is not in your PATH, and SublimeLinter will not be able to find it. At this point you will have to find out what directory the executable was installed in from the linter’s documentation. Once you find that, you will need to augment your PATH by following the steps in Augmenting PATH below.
However, after hours trying I just can't find the"directory the executable was installed", in order to include in PATH. Yes, I found many questions about this online, but the only ones that have answers are giving solutions to Linux systems.
Any help would be very much appreciated.
In the sublime editor select Preferences -> Browse Packages
A folder will open listing the installed packages.
I have instaled Cygwin after running MinGW for a while now. But when I try to compile the console gives me:
/usr/lib/gcc/x86_64-pc-cygwin/4.9.2/cc1.exe: error while loading shared libraries: ?: cannot open shared object file: No such file or directory
What does this mean?
I have the same problem and I found the solution.
According to the FAQ of Cygwin
Q: Why is C:\cygwin\usr\bin invisible from windows?
A: Because it does not really exist. In cygwin, /usr/bin is just a link to /bin.
So trying to add "C:\cygwin\usr\bin" to PATH will be in vain.
Add "C:\cygwin64\bin" to PATH instead. Hope this helps :)
You are missing a library, please run cygcheck /usr/lib/gcc/x86_64-pc-cygwin/4.9.2/cc1.exe or ldd /usr/lib/gcc/x86_64-pc-cygwin/4.9.2/cc1.exe to see what is the missing library.
(I'd rather ask a question in the comments first, but I don't have enough reputation yet.)
Your cc1 is unable to load some DLLs it needs to start. Looking at the Cygwin source code, this can be either a library specified in LD_PRELOAD, or -- more probably -- a library the executable depends on. The ? in the error message seems to be the default return value of find_first_notloaded_dll (hookapi.cc), in case the function can't determine what library is missing.
To diagnose the issue, I suggest checking your PATH variable (or even clearing it of any non-Cygwin paths and trying the compilation again) and/or using Dependency Walker to find the missing DLLs (start it from a Cygwin shell, so it can see the same PATH). ldd (included with Cygwin) may also give some clues, but I wouldn't bet on it.
It's possible a clean re-install of Cygwin will be necessary to solve the issue.
Most likely, you are simply missing /usr/bin in the PATH variable.
Adding 'export PATH=/usr/bin:$PATH' to your .bashrc file will solve the issue.
Adding some background info. I had the same problem when building my own program and linking it against graphviz cgraph.dll. Turns out this is related to where windows searches for DLLs (see here: https://msdn.microsoft.com/en-us/library/7d83bc18.aspx) So adding the path of your missing library to PATH should fix the problem.
It is unfortunate that the message doesn't include the name of the library. Luckily cmd.exe DOES give you this name (so it's good for something after all;)
Are you including the path to your lib directory?
Looks like you are not
I'm not very familiar with Cygwin, I mainly use MinGW, but I think the error message speaks for itself
I also came this error on windows machine while executing .exe file generated by scilab2C i.e toolbox for Scilab
For Windows 32 bit Add the environment variable path as follow :
C:\cygwin\usr\i686-pc-cygwin\bin
Hope so this will solve your issue.
Just had this problem trying to compile a package with make and it wanted some cygguile dll file that was just installed along with make.
My solution was I had not only migrated my cygwin64 directory across drives because the sector sizes were mismatched for some reason even though the drivers were both under 2TB and should have been using 512 byte sector sizes.. So I had to install a new system and move files over there, might have had weird permissions on them.
Also had to patch cygwin1.dll end of Jan 2020 because of a recent input problem in ConEmu with Windows 10 1903 build, but just did it again with this working so that doesn't seem to be the issue.
Reinstalling cygwin by deleting that entire directory, taking ownership of it first.., seemed to work now...
I am running into errors with opencv. I downloaded a package online and compiled each of the folders by cd into them and running make through the command line. But when I try using one of the functions, I run into this error: libopencv_core.so.2.3: cannot open shared object file: No such file or directory
The file its trying to reach is indeed there, since I checked this, but for some reason its saying its not. I am pretty bad at figuring out path problems but I think this is one of them. Can anyone tell me how to fix this? Thanks