I find myself copy-pasting text between editors a lot. Often with the result of SQL outputs that are usually about 10,000+ lines. I have never had a problem doing this -- usually it takes all of a second or two to paste it in. However, when I use vim, it takes about a minute to copy-paste in all that text, this is after settings :set no paste.
Is this supposed to happen in vim or is there some sort of setting I can change so this doesn't occur? I've tried TextMate, TextEdit, VSCode, etc, and vim is the only one with this issue related to copy-paste.
I think you should use :set paste instead.
Because :set no paste paste character per character and check if whether these character is matched with some key binding, some shortcut.
Related
I am trying to use the vim autowrap functionality to automatically wrap my paragraph into lines no longer than 80 letters in real time as I type. This can be done by set textwidth=80 and set fo+=a. The a option of the vim formatoptions or fo basically tells vim to wrap the entire paragraph while typing.
However, there is a very annoying side-effect, that I can no longer break a line by simply pressing enter.
This is a sample sentence.
Say for the above sentence, if I want to make it into:
This is
a sample sentence.
Usually I can just move the cursor to "a" and enter insert mode and then press enter. But after set fo+=a, nothing will happen when I press enter in the insert mode at "a". One thing I do notice is that if there is no space between "is" and "a", pressing enter will insert a space. But nothing else will happen after that.
So what do I miss here? How do I stop this annoying behavior?
You can run :help fo-table to see explanations of the options:
a Automatic formatting of paragraphs. Every time text is inserted or
deleted the paragraph will be reformatted. See |auto-format|.
When the 'c' flag is present this only happens for recognized
comments.
This means that every time you insert a character, vim will try and autoformat the paragraph. This will cause it to move everything back onto the same line.
I don't think you need to add a at all. I use neovim, but the behavior here should be the same. The default values are, according to the help pages:
(default: "tcqj", Vi default: "vt")
Try removing set fo+=a entirely from your .vimrc. Keep set textwidth=80. That should fix your issue.
EDIT: Once you have set textwidth=80, if you want to format an existing paragraph, you can highlight it in visual selection and press gq.
The following allows me to use the enter key to start a new line while setting the text width to be 79 characters:
set tw=79 "width of document
set fo=cqt
set wm=0 "# margin from right window border
After some exploration, I find a workaround that can solve the problem to some extent, though not perfect.
The basic idea is that when entering a line break, disable the auto-wrapping temporarily when sending <CR> and resume auto-wrapping after that. There are multiple ways of doing that. And the best one as far as I know is using the paste mode, since you don't have to exit insert mode when entering paste mode. So just make the following commands into any key binding you like in insert mode. The one I am using right now is inoremap <C-N> <F2><CR><F2>
The reason why I think this one is not optimal is that for some reason I cannot bind <Enter> in this way, but have to use another key.
If <Enter> or <CR> can be configured in this way then the problem is 100% solved.
Vim always manages to clip off at least of couple of characters when I copy something from a text file, such as a public rsa key for example.
Generally, I open a text file in my computer, highlight the text, copy it to my clipboard. I go into my terminal (with Vim already open) and then:
i (for insert)
ctrl+shift+v
Am I doing something wrong?
I've double checked, and triple checked, this, and I am absolutely sure that I highlighted all of the text that I needed to copy. Other times it works fine. There does not seem to be any consistency in regards to when it happens.
Anyone experience this?
This usually happens because something in the pasted text triggers a key mapping unexpectedly. This is what paste mode is for.
Do this before pasting:
:set paste
And turn it off after:
:set nopaste
This can be annoying to type frequently, so there is a way to map it to a key combination. I use ,p for this, and have this in my .vimrc:
set pastetoggle=,p
(Yes, I use an actual comma here, not <Leader>. That's because <Leader> won't work here, as this isn't technically a mapping.)
This is a toggle, so you can use it to turn the mode on and off. It works in both normal mode and insert mode.
You do want to turn it off after the paste. Since paste mode disables your insert mappings, you don't want to leave it on all the time.
You can read more about the paste option with :help 'paste.
The annoyance of toggling to and form paste mode can be avoided by using "+p or "*p. (You're putting the quoteplus register).
More often than not, I prefer "+P, since this leaves my cursor at the end of properly formatted put. see :help quoteplus for details. So the whole workflow is:
outside of vim: copy to clipboard
inside of vim: "+P
I'm new to vim and I'm using gVim on Windows. I have two windows open in the same gvim instance and I'm just trying to copy some code from one to another. For some reason when it pastes it replaces the contents of some code with literally this:
list.forEach(function(name){...}------------------------------------------
Obviously, my real code does not have ... or a ton of dashes. What the hell is happening?
The dashes (----------) give it away: The block of code has been folded. (You probably also see the line with different colors (depending on your colorscheme).) Depending on the filetype, folding can be manual or automatic. For your (JavaScript?) code, it's the latter. So when you paste a block of code, Vim automatically detects the block and folds it.
There's a whole lot of commands and options around folding. Read more about it at :help folding. If you find this too confusing (for now), turn it off via
:set nofoldenable
Just press zo on the dashes(-----)
Aside: Use zf on selected (v) lines to fold lines.
zo - Open
zo - Fold
I've been using vim for somewhat longer than a year now and during this time I have never feel really comfortable with the way vim works with yanking and pasting text (or maybe it is just me not using it in the most efficient way)
For example, I have the word "World" yanked onto a register, and I want to paste it after "Hello". (Note that there are no spaces on either of the words). So, what I would do is
Hello
|
Place cursor here, and press "p". Then, what I will end up with is
HelloWorld
So, in order to avoid this, I have always to swith into insert mode, insert a espace, and go back into normal mode (or either make sure that the yanked word has a space before it). Be as it may, this is quite annoying behaviour I can't think of a solution for... Am I missing something here?
Suggestions will be appreciated.
Thanks
option zero
just live with what you have now.
option one
create a mapping for your workflow. for example
nnoremap <leader>p i<space><esc>p
option two
:set ve=all
then you could move your cursor to anywhere and paste
option three
you could in insert mode use <c-o> do normal mode stuff or <c-r> to get register values
I recommend option zero
You can use the Smartput : Adjust spaces and commas when putting text plugin for that. It modifies the p / P commands (this can be toggled on / off).
I'm aware of the vim replace command, which is of the form, eg:
:%s/old/new/gc
But what if either of these strings is long? How can I use something like visual selection mode, the clipboard or vim registers instead of having to type the old/new text in?
You can use q: to bring up a command-line window. This lets you use all the vim editing commands to edit the vim command line, including p to paste. So, you could copy the text into a register, paste it into the command line window, and execute it that way.
I recently discovered this feature via vimcasts.
According to the manual, you can use Ctrl+R to insert the contents of a register into the current position in the command line. The manual also claims that Ctrl+Y inserts the text highlighted with the mouse into the command line. Remember that in X11 and some other systems, you can also paste text into a program from the system clipboard using the middle mouse button or a menu command in your terminal emulator.
I think to avoid have your command line be huge you can use this to solve your issue
:%s/foo/\=#a/g
That replaces "foo" with whatever is in register a.
If you're trying to do a substitute with a long complicated search pattern, here's a good way of going about it:
Try out the search pattern using some test cases and refine it until you have the pattern you want. I find incsearch really helps, especially with complicated regular expressions.
You can then use :%s//new to replace all instances of the last searched for pattern.
If you've entered a pattern and want to copy it out of the search history, you can use q/ to bring up a command line window containing recent search patterns very similar to the q: one that contains recent command history.
On the other hand, if you're asking about how to copy and paste text into the substitute command:
I'd write the pattern out in insert mode and yank the search and replacement into two distinct registers using, say, "ay and "by and then use :%s/<C-R>a/<C-R>b/gc to do the substitute. There are lots of variations of the yank command, but this one should also work automatically when using a visual selection.
If you're copying in text from the clipboard, you can use <C-R>* to paste it's contents in insert mode.
I have the following mapping in my .vimrc
vnoremap <leader>r "ry:%s/^Rr/
So I visually select the thing I want to replace, and hit ,r, type the replacement and hit return. If I want to paste the replacement, I yank it before selecting the text to replace, and then use <C-r>" to paste it as the replacement before hitting return.
Note: to insert ^R in your .vimrc, you actually type <C-v><C-r>.