I am trying to redirect an url like that: website_name/download?q=filename.pdf to website_name/resources/filename.pdf
Also, website_name/download?q=filename.pdf is not existing but the users has a chance to find this link so that is why I want to redirect it.
I wrote the following code in my .htaccess:
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_URI} /download?q=$1
RewriteRule ([^\/]+\.pdf)$ /resources [NC,L,R=301]
</IfModule>
but for some reason it is not working. If anyone has an idea! Thank you
Your question is a bit vague, but I understand that you want something like this combination of an external redirection and an internal rewrite:
RewriteEngine On
# external redirect from /download?q=file.pdf to /resources/file.pdf
RewriteCond %{QUERY_STRING} (?:^|&)q=([^&]+\.pdf)(?:&|$)
RequestRule ^/?download /resources/%1.pdf [R=301]
# internal rewrite from /resources/file.pdf to /download?q=file.pdf
RewriteRule ^/?resources/([^/]+\.pdf)$ /download?q=$1 [END]
It is a good idea to start out with a 302 temporary redirection and only change that to a 301 permanent redirection later, once you are certain everything is correctly set up. That prevents caching issues while trying things out...
In case you receive an internal server error (http status 500) using the rule above then chances are that you operate a very old version of the apache http server. You will see a definite hint to an unsupported [END] flag in your http servers error log file in that case. You can either try to upgrade or use the older [L] flag, it probably will work the same in this situation, though that depends a bit on your setup.
This implementation will work likewise in the http servers host configuration or inside a distributed configuration file (".htaccess" file). Obviously the rewriting module needs to be loaded inside the http server and enabled in the http host. In case you use a distributed configuration file you need to take care that it's interpretation is enabled at all in the host configuration and that it is located in the host's DOCUMENT_ROOT folder.
And a general remark: you should always prefer to place such rules in the http servers host configuration instead of using distributed configuration files (".htaccess"). Those distributed configuration files add complexity, are often a cause of unexpected behavior, hard to debug and they really slow down the http server. They are only provided as a last option for situations where you do not have access to the real http servers host configuration (read: really cheap service providers) or for applications insisting on writing their own rules (which is an obvious security nightmare).
Related
I am searching for a few hours on how to redirect all .php files to the file without the .php.
I know there is surely a fast answer for this but I have really trouble finding it.
How can I say that if someone loads mysite.com/mysubfolder/mysecondsub/myfile.php goes to mysite.com/mysubfolder/mysecondsub/myfile?
Like a normal rewrite except the URL PHP redirects to the one without the PHP extension.
(using .htaccess if possible and mod_rewrite)
I configured Apache2.conf to allow overwrites so that I am able to use .htacess.
It works when I use something like this post htaccess remove index.php from url
But the thing is that it works if I write mysite.com/url, but if I write mysite.com/url.php it does not redirect to mysite/url (which is what I want) I tried a few solutions but still no idea.
This probably is what you are looking for:
RewriteEngine on
RewriteRule ^/?(.+)\.php$ /$1 [R=301]
RewriteCond %{REQUEST_URI} !\.php$
RewriteCond %{REQUEST_FILENAME}.php -f
RewriteRule ^/?(.+)$ /$1.php [END]
It is a good idea to start out with a 302 temporary redirection and only change that to a 301 permanent redirection later, once you are certain everything is correctly set up. That prevents caching issues while trying things out...
In case you receive an internal server error (http status 500) using the rule above then chances are that you operate a very old version of the apache http server. You will see a definite hint to an unsupported [END] flag in your http servers error log file in that case. You can either try to upgrade or use the older [L] flag, it probably will work the same in this situation, though that depends a bit on your setup.
This implementation will work likewise in the http servers host configuration or inside a distributed configuration file (".htaccess" file). Obviously the rewriting module needs to be loaded inside the http server and enabled in the http host. In case you use a distributed configuration file you need to take care that it's interpretation is enabled at all in the host configuration and that it is located in the host's DOCUMENT_ROOT folder.
And a general remark: you should always prefer to place such rules in the http servers host configuration instead of using distributed configuration files (".htaccess"). Those distributed configuration files add complexity, are often a cause of unexpected behavior, hard to debug and they really slow down the http server. They are only provided as a last option for situations where you do not have access to the real http servers host configuration (read: really cheap service providers) or for applications insisting on writing their own rules (which is an obvious security nightmare).
I'm trying to set a .htaccess directive to transform this :
https://www.example.com/nos-modeles?product-page=3
OR
https://www.example.com/nos-modeles?product-page=2
TO
https://www.example.com/nos-modeles/3
OR
https://www.example.com/nos-modeles/2
I've tried this, but it didn't do the job:
RewriteCond %{QUERY_STRING} ^(.*&|)product-page=\d+(?:&(.*)|)$
RewriteRule (.*) /$1 [R=302,L]
Your question is a bit unclear about what you are actually trying to do, rewriting incoming requests or redirecting existing references to "pretty URLs"...
Here is an approach that does both which actually is a typically combination:
RewriteEngine on
RewriteCond %{QUERY_STRING} (?:^|&)product-page=(\d+)(?:&|$)
RewriteRule ^/?nos-modeles/?$ /nos-modeles/%1 [R=301]
RewriteRule ^/?nos-modeles/(\d+)/?$ /nos-modeles?product-page=$1 [END]
It is a good idea to start out with a 302 temporary redirection and only change that to a 301 permanent redirection later, once you are certain everything is correctly set up. That prevents caching issues while trying things out...
In case you receive an internal server error (http status 500) using the rule above then chances are that you operate a very old version of the apache http server. You will see a definite hint to an unsupported [END] flag in your http servers error log file in that case. You can either try to upgrade or use the older [L] flag, it probably will work the same in this situation, though that depends a bit on your setup.
This implementation will work likewise in the http servers host configuration or inside a dynamic configuration file (".htaccess" file). Obviously the rewriting module needs to be loaded inside the http server and enabled in the http host. In case you use a dynamic configuration file you need to take care that it's interpretation is enabled at all in the host configuration and that it is located in the host's DOCUMENT_ROOT folder.
And a general remark: you should always prefer to place such rules in the http servers host configuration instead of using dynamic configuration files (".htaccess"). Those dynamic configuration files add complexity, are often a cause of unexpected behavior, hard to debug and they really slow down the http server. They are only provided as a last option for situations where you do not have access to the real http servers host configuration (read: really cheap service providers) or for applications insisting on writing their own rules (which is an obvious security nightmare).
How I can rewrite subdomain to url in htaccess for all urls
Exemple :
Admin.domain.com to www.domain.com/admin
Admin.domain.com/users to www.domain.com/admin/users
This should be what you are looking for:
RewriteEngine on
RewriteCond %{HTTP_HOST} ^admin\.
RewriteRule ^/?(.*)$ /admin/$1 [END]
Note that this will perform an internal rewriting, as you asked for. In case you actually want an external redirection, so the visible URL in the browser to change, then that variant would do the job:
RewriteEngine on
RewriteCond %{HTTP_HOST} ^admin\.
RewriteRule ^/?(.*)$ https://www.example.com/admin/$1 [R=301]
It is a good idea to start out with a 302 temporary redirection and only change that to a 301 permanent redirection later, once you are certain everything is correctly set up. That prevents caching issues while trying things out...
In case you receive an internal server error (http status 500) using the rule above then chances are that you operate a very old version of the apache http server. You will see a definite hint to an unsupported [END] flag in your http servers error log file in that case. You can either try to upgrade or use the older [L] flag, it probably will work the same in this situation, though that depends a bit on your setup.
This implementation will work likewise in the http servers host configuration or inside a dynamic configuration file (".htaccess" file). Obviously the rewriting module needs to be loaded inside the http server and enabled in the http host. In case you use a dynamic configuration file you need to take care that it's interpretation is enabled at all in the host configuration and that it is located in the host's DOCUMENT_ROOT folder.
And a general remark: you should always prefer to place such rules in the http servers host configuration instead of using dynamic configuration files (".htaccess"). Those dynamic configuration files add complexity, are often a cause of unexpected behavior, hard to debug and they really slow down the http server. They are only provided as a last option for situations where you do not have access to the real http servers host configuration (read: really cheap service providers) or for applications insisting on writing their own rules (which is an obvious security nightmare).
I want a rewrite rule for https://example.com/dev1.0/templates/feedback.php?uid=3 to be used as https://example.com/dev1.0/templates/feedback/uid/3
This probably is what you are looking for:
RewriteEngine on
RewriteRule ^/?dev1\.0/templates/feedback/uid/(\d+)/?$ /dev1.0/templates/feedback.php?uid=$1 [END]
In case you receive an internal server error (http status 500) using the rule above then chances are that you operate a very old version of the apache http server. You will see a definite hint to an unsupported [END] flag in your http servers error log file in that case. You can either try to upgrade or use the older [L] flag, it probably will work the same in this situation, though that depends a bit on your setup.
If you also want to redirect old references things get a bit more complicated:
RewriteEngine on
RewriteCond %{QUERY_STRING} ^uid=(\d+)$
RewriteRule ^/?dev1\.0/templates/feedback\.php$ /dev1.0/templates/feedback/uid/%1 [R=301]
RewriteRule ^/?dev1\.0/templates/feedback/uid/(\d+)/?$ /dev1.0/templates/feedback.php?uid=$1 [END]
It is a good idea to start out with a 302 temporary redirection and only change that to a 301 permanent redirection later, once you are certain everything is correctly set up. That prevents caching issues while trying things out...
This implementation will work likewise in the http servers host configuration or inside a dynamic configuration file (".htaccess" file). Obviously the rewriting module needs to be loaded inside the http server and enabled in the http host. In case you use a dynamic configuration file you need to take care that it's interpretation is enabled at all in the host configuration and that it is located in the host's DOCUMENT_ROOT folder.
And a general remark: you should always prefer to place such rules in the http servers host configuration instead of using dynamic configuration files (".htaccess"). Those dynamic configuration files add complexity, are often a cause of unexpected behavior, hard to debug and they really slow down the http server. They are only provided as a last option for situations where you do not have access to the real http servers host configuration (read: really cheap service providers) or for applications insisting on writing their own rules (which is an obvious security nightmare).
My server has following directory in the web directory
/mydomain/site/
/mydomain/site/project1/
/mydomain/site/project2/
I want to point domain http://mydoman.com to site directory /mydomain/site/ and access project directories using http://mydoman.com/project1/ and http://mydoman.com/project2/
I tried following code. When I type http://mydoman.com/project1/ in the browser, it is working fine but the problem is when i type http://mydoman.com/project1 (without "/" in the end of url) the url changes to http://mydoman.com/mydomain/site/project1/
RewriteEngine On
RewriteCond %{HTTP_HOST} mydomain.com$ [NC]
RewriteCond %{REQUEST_URI} !^/mydomain/site/.*$
RewriteRule ^(.*)$ /mydomain/site/$1 [L]
what I need is when I type http://mydoman.com/project1 url should not change to http://mydoman.com/mydomain/site/project1/
also
this url should not work http://mydoman.com/mydomain/site/project1/
Not sure why you don't want to use separate host names for separate projects. That would save a lot of hassle. Like https://example.com/... and https://project1.example.com/....
But anyway, this probablyis what you are looking for:
RewriteEngine on
RewriteRule ^/?mydomain/site/(.*)$ /$1 [R=301,QSA]
RewriteRule ^/?site/(.*)$ /$1 [R=301,QSA]
RewriteRule ^/?(.*)$ /mydomain/site/$1 [END]
You also need to take care that your application logic uses clean, relatvie references and not absolute paths like /site/... or /mydomain/site/... or even full URLs like https://example.com/mydomain/site/.... But that has nothing to do with rewriting. You need to solve that directly in your application logic.
It is a good idea to start out with a 302 temporary redirection and only change that to a 301 permanent redirection later, once you are certain everything is correctly set up. That prevents caching issues while trying things out...
In case you receive an internal server error (http status 500) using the rule above then chances are that you operate a very old version of the apache http server. You will see a definite hint to an unsupported [END] flag in your http servers error log file in that case. You can either try to upgrade or use the older [L] flag, it probably will work the same in this situation, though that depends a bit on your setup.
This rule will work likewise in the http servers host configuration or inside a dynamic configuration file (".htaccess" file). Obviously the rewriting module needs to be loaded inside the http server and enabled in the http host. In case you use a dynamic configuration file you need to take care that it's interpretation is enabled at all in the host configuration and that it is located in the host's DOCUMENT_ROOT folder.
And a general remark: you should always prefer to place such rules in the http servers host configuration instead of using dynamic configuration files (".htaccess"). Those dynamic configuration files add complexity, are often a cause of unexpected behavior, hard to debug and they really slow down the http server. They are only provided as a last option for situations where you do not have access to the real http servers host configuration (read: really cheap service providers) or for applications insisting on writing their own rules (which is an obvious security nightmare).