My apologies for the bad title!
I am in the initial phase of designing an Azure Time Series solution and I have run into a number of uncertainties. The background for getting into TSI is that we currently have a rather badly designed cosmos db which contains close to 1TB of IoT data and it is growing by the minute. By "badly" I mean that the partition key was designed in such a manner that we do not have control of the size of the partitions. Knowing that there is a limit of 10GB(?) pr partition key, we will soon run out of space and need to come up with a new solution. Also, when running historical queries on the cosmos db, it does not respond within an acceptable time frame. Any experiments with throughput calculations and changes does not improve the response time to an accepted time frame.
We are in the business of logging IoT time series data including metadata from different sensors. We have a number of clients which have from 30 to 300 sensors each - smaller and larger clients. At the client side the sensors are grouped into locations and sub-locations.
An example of an event could be something like this:
{
deviceId,
datetime,
clientId,
locationId,
sub-locationId,
sensor,
value,
metadata{}
}
Knowing how to better design a partition key in CosmosDB, would the same approach as described below be considered as a good practice in TSI when composing the TimeSeriesId?
In a totally different cosmosdb solution we have included eventDate.datepart(YYYY-MM) as a part of the partition key to stop it from growing out of bounds and to better predict the response time on queries within one partition.
Or will TSI handle time series data differently thus making the datepart in TimeSeriesId obsolete?
Having TSI API queries in mind, should I consider the simpicity of the composed TimeSeriesId as well? The TimeSeriesId has to be provided in the body of each API request - as far as I can tell, and when composing a query in a back-end service I do have access to all our clients id's and location/sub-location id's. And these are more accesible than the deviceId's
And finally, when storing IoT data for multiple clients would it be best practice to provision a new TSI solution for each client or does TSI support collections as seen in CosmosDB?
As stated in this article, when using composite key, you will need to query against all the key properties, and not against one or some of them. That's a consideration when deciding for a single key or composite key. Also, as it states in the article, as tip,
If your event source is an IoT hub, your Time Series ID will likely be iothub-connection-device-id.
So, I assume you will have at least one IoT Hub sourcing the events reported from the devices, and in this case you can use the iothub-connection-device-id.
Related
We would like to store a set of documents in Cosmos DB with a primary key of EventId. These records are evenly distributed across a number of customers. Clients need to access the latest records for a subset of customers as new documents are added. The documents are immutable, and need to be stored indefinitely.
How should we design our partition key and queries to avoid clients all hitting the same partitions and/or high RU usage?
If we use just CustomerId as the partition key, we would eventually run over the 10GB limit for a logical partition, and if we use EventId, then querying becomes inefficient (would result in a cross-partition query, and high RU usage, which we'd like to avoid).
Another idea would be to group documents into blocks. i.e. PartitionKey = int(EventId / PartitionSize). This would result in all clients hitting the latest partition(s), which presumably would result in poor performance and throttling.
If we use a combined PartitionKey of CustomerId and int(EventId / PartitionSize), then it's not clear to me how we would avoid a cross-partition query to retrieve the correct set of documents.
Edit:
Clarification of a couple of points:
Clients will access the events by specifying a list of CustomerId's, the last EventId they received, and a maximum number of records to retrieve.
For this reason, the use of EventId alone won't perform well, as it will result in a cross partition query (i.e. WHERE EventId > LastEventId).
The system will probably be writing on the order of 1GB a day, in 15 minute increments.
It's hard to know what the read volume will be, but I'd guess probably moderate, with maybe a few thousand clients polling the API at regular intervals.
So first thing first, logical partitions size limit has now been increased to 20GB, please see here.
You can use EventID as a partition as well, as you have limit of logical partition's size in GB but you have no limit on amount of logical partitions. So using EventID is fine, you will get a point to point read which is very fast if you query using the EventID. Now you mention using this way you will have to do cross-partition queries, can you explain how?
Few things to keep in mind though, Cosmos DB is not really meant for storing this kind of Log based data as it stores everything in SSDs so please calculate how much is your 1 document size and how many in a second would you have to store then how much in a day to how much in a month. You can use TTL to delete from Cosmos when done though and for long term storage store it in Azure BLOB Storage and for fast retrievals use Azure Search to query the data in BLOB by using CustomerID and EventID in your search query.
How should we design our partition key and queries to avoid clients all hitting the same partitions and/or high RU usage?
I faced a similar issue some time back and a PartitionKey with customerId + datekey e.g. cust1_20200920 worked well for me.
I created the date key as 20200920 (YYYYMMDD), but you can choose to ignore the date part or even the month (cust1_202009 /cust1_2020), based on your query requirement.
Also, IMO, if there are multiple known PartitionKeys at a query time it's kind of a good thing. For example, if you keep YYYYMM as the PartitionKey and want to get data for 4 months, you can run 4 queries in parallel and combine the data. Which is faster if you have many clients and these Partition Keys are distributed among multiple physical partitions.
On a separate note, Cosmos Db has recently introduced an analytical store for the transactional data which can be useful for your use case.
More about it here - https://learn.microsoft.com/en-us/azure/cosmos-db/analytical-store-introduction
One approach is using multiple Cosmos containers as "hot/cold" tiers with different partitioning. We could use two containers:
Recent: all writes and all queries for recent items go here. Partitioned by CustomerId.
Archive: all items are copied here for long term storage and access. Partitioned by CustomerId + timespan (e.g. partition per calendar month)
The Recent container would provide single partition queries by customer. Data growth per partition would be limited either by setting reasonable TTL during creation, or using a separate maintenance job (perhaps Azure Function on timer) to delete items when they are no longer candidates for recent-item queries.
A Change Feed processor, implemented by an Azure Function or otherwise, would trigger on each creation in Recent and make a copy into Archive. This copy would have partition key combining the customer ID and date range as appropriate to limit the partition size.
This scheme should provide efficient recent-item queries from Recent and safe long-term storage in Archive, with reasonable Archive query efficiency given a desired date range. The main downside is two writes for each item (one for each container) -- but that's the tradeoff for efficient polling. Whether this tradeoff is worthwhile is probably best determined by simulating the load and observing performance.
Is it possible to output aggregation data on every trigger, before the aggregation time window is over?
Context: I'm developing an application that reads data from a Kafka topic, processes the data, aggregates it over a 1-hour window, and outputs to S3. However, The spark application understandably outputs the aggregation data to S3 only at the end of a given hour window.
The problem is that the end-users of the aggregated data in S3 can only have a semi real-time view, since they are always one hour late, waiting for the next aggregation to be outputted from the spark application.
Reducing the aggregation time window to something smaller than an hour would certainly help, but would generate a lot more data.
What could be done to enable real-time aggregation, as I call it, using minimal resources?
This is an interesting one and I do have a proposal but I'm not sure if this would really fit your minimal criteria. I'll describe the solution anyway...
If the end goal is to enable users to query data in real-time (or faster analytics in other words) then one way to achieve this is to introduce a database in your architecture that can handle fast inserts/updates - either a key-value store or a column oriented database. Below is a diagram that might help you in visualising this:
The idea is simple - just keep ingesting data into the first database and then keep offloading the data into S3 after a certain time i.e. either an hour or a day depending on your requirements. You could then register the metadata of both of these storage layers into a metadata layer (such as AWS Glue) - this may not always be necessary if you don't need a persistent metastore. On top of this, you could use something like Presto to query across both of these stores. This would also enable you to optimise your storage across these 2 data stores.
You'll obviously need to build the process to drop/delete the data partitions from the store you would be streaming in to and also to move data to S3.
This model is referred to as a tiered storage model or hierarchical storage model with sliding window pattern - Reference Article from Cloudera.
Hope this helps!
I am building an application and using Cassandra as my datastore. In the app, I need to track event counts per user, per event source, and need to query the counts for different windows of time. For example, some possible queries could be:
Get all events for user A for the last week.
Get all events for all users for yesterday where the event source is source S.
Get all events for the last month.
Low latency reads are my biggest concern here. From my research, the best way I can think to implement this is a different counter tables for each each permutation of source, user, and predefined time. For example, create a count_by_source_and_user table, where the partition key is a combination of source and user ID, and then create a count_by_user table for just the user counts.
This seems messy. What's the best way to do this, or could you point towards some good examples of modeling these types of problems in Cassandra?
You are right. If latency is your main concern, and it should be if you have already chosen Cassandra, you need to create a table for each of your queries. This is the recommended way to use Cassandra: optimize for read and don't worry about redundant storage. And since within every table data is stored sequentially according to the index, then you cannot index a table in more than one way (as you would with a relational DB). I hope this helps. Look for the "Data Modeling" presentation that is usually given in "Cassandra Day" events. You may find it on "Planet Cassandra" or John Haddad's blog.
Two somewhat related questions.
1) Is there anyway to get an ID of the server a table entity lives on?
2) Will using a GUID give me the best partition key distribution possible? If not, what will?
we have been struggling for weeks on table storage performance. In short, it's really bad, but early on we realized that using a randomish partition key will distribute the entities across many servers, which is exactly what we want to do as we are trying to achieve 8000 reads per second. Apparently our partition key wasn't random enough, so for testing purposes, I have decided to just use a GUID. First impression is it is waaaaaay faster.
Really bad get performance is < 1000 per second. Partition key is Guid.NewGuid() and row key is the constant "UserInfo". Get is execute using TableOperation with pk and rk, nothing else as follows: TableOperation retrieveOperation = TableOperation.Retrieve(pk, rk); return cloudTable.ExecuteAsync(retrieveOperation). We always use indexed reads and never table scans. Also, VM size is medium or large, never anything smaller. Parallel no, async yes
As other users have pointed out, Azure Tables are strictly controlled by the runtime and thus you cannot control / check which specific storage nodes are handling your requests. Furthermore, any given partition is served by a single server, that is, entities belonging to the same partition cannot be split between several storage nodes (see HERE)
In Windows Azure table, the PartitionKey property is used as the partition key. All entities with same PartitionKey value are clustered together and they are served from a single server node. This allows the user to control entity locality by setting the PartitionKey values, and perform Entity Group Transactions over entities in that same partition.
You mention that you are targeting 8000 requests per second? If that is the case, you might be hitting a threshold that requires very good table/partitionkey design. Please see the article "Windows Azure Storage Abstractions and their Scalability Targets"
The following extract is applicable to your situation:
This will provide the following scalability targets for a single storage account created after June 7th 2012.
Capacity – Up to 200 TBs
Transactions – Up to 20,000 entities/messages/blobs per second
As other users pointed out, if your PartitionKey numbering follows an incremental pattern, the Azure runtime will recognize this and group some of your partitions within the same storage node.
Furthermore, if I understood your question correctly, you are currently assigning partition keys via GUID's? If that is the case, this means that every PartitionKey in your table will be unique, thus every partitionkey will have no more than 1 entity. As per the articles above, the way Azure table scales out is by grouping entities in their partition keys inside independent storage nodes. If your partitionkeys are unique and thus contain no more than one entity, this means that Azure table will scale out only one entity at a time! Now, we know Azure is not that dumb, and it groups partitionkeys when it detects a pattern in the way they are created. So if you are hitting this trigger in Azure and Azure is grouping your partitionkeys, it means your scalability capabilities are limited to the smartness of this grouping algorithm.
As per the the scalability targets above for 2012, each partitionkey should be able to give you 2,000 transactions per second. Theoretically, you should need no more than 4 partition keys in this case (assuming that the workload between the four is distributed equally).
I would suggest you to design your partition keys to group entities in such a way that no more than 2,000 entities per second per partition are reached, and drop using GUID's as partitionkeys. This will allow you to better support features such as Entity Transaction Group, reduce the complexity of your table design, and get the performance you are looking for.
Answering #1: There is no concept of a server that a particular table entity lives on. There are no particular servers to choose from, as Table Storage is a massive-scale multi-tenant storage system. So... there's no way to retrieve a server ID for a given table entity.
Answering #2: Choose a partition key that makes sense to your application. just remember that it's partition+row to access a given entity. If you do that, you'll have a fast, direct read. If you attempt to do a table- or partition-scan, your performance will certainly take a hit.
See
http://blogs.msdn.com/b/windowsazurestorage/archive/2010/11/06/how-to-get-most-out-of-windows-azure-tables.aspx for more info on key selection (Note the numbers are 3 years old, but the guidance is still good).
Also this talk can be of some use as far as best practice : http://channel9.msdn.com/Events/TechEd/NorthAmerica/2013/WAD-B406#fbid=lCN9J5QiTDF.
In general a given partition can support up to 2000 tps, so spreading data across partitions will help achieve greater numbers. Something to consider is that atomic batch transactions only apply to entities that share the same partitionkey. Additionally, for smaller requests you may consider disabling Nagle as small requests may be getting held up at the client layer.
From the client end, I would recommend using the latest client lib (2.1) and Async methods as you have literally thousands of requests per second. (the talk has a few slides on client best practices)
Lastly, the next release of storage will support JSON and JSON no metadata which will dramatically reduce the size of the response body for the same objects, and subsequently the cpu cycles needed to parse them. If you use the latest client libs your application will be able to leverage these behaviors with little to no code change.
We are about to implement the Read portion of our CQRS system in-house with the goal being to vastly improve our read performance. Currently our reads are conducted through a web service which runs a Linq-to-SQL query against normalised data, involving some degree of deserialization from an SQL Azure database.
The simplified structure of our data is:
User
Conversation (Grouping of Messages to the same recipients)
Message
Recipients (Set of Users)
I want to move this into a denormalized state, so that when a user requests to see a feed of messages it reads from EITHER:
A denormalized representation held in Azure Table Storage
UserID as the PartitionKey
ConversationID as the RowKey
Any volatile data prone to change stored as entities
The messages serialized as JSON in an entity
The recipients of said messages serialized as JSON in an entity
The main problem with this the limited size of a row in Table Storage (960KB)
Also any queries on the "volatile data" columns will be slow as they aren't part of the key
A normalized representation held in Azure Table Storage
Different table for Conversation details, Messages and Recipients
Partition keys for message and recipients stored on the Conversation table.
Bar that; this follows the same structure as above
Gets around the maximum row size issue
But will the normalized state reduce the performance gains of a denormalized table?
OR
A denormalized representation held in SQL Azure
UserID & ConversationID held as a composite primary key
Any volatile data prone to change stored in separate columns
The messages serialized as JSON in a column
The recipients of said messages serialized as JSON in an column
Greatest flexibility for indexing and the structure of the denormalized data
Much slower performance than Table Storage queries
What I'm asking is whether anyone has any experience implementing a denormalized structure in Table Storage or SQL Azure, which would you choose? Or is there a better approach I've missed?
My gut says the normalized (At least to some extent) data in Table Storage would be the way to go; however I am worried it will reduce the performance gains to conduct 3 queries in order to grab all the data for a user.
Your primary driver for considering Azure Tables is to vastly improve read performance, and in your scenario using SQL Azure is "much slower" according to your last point under "A denormalized representation held in SQL Azure". I personally find this very surprising for a few reasons and would ask for detailed analysis on how this claim was made. My default position would be that under most instances, SQL Azure would be much faster.
Here are some reasons for my skepticism of the claim:
SQL Azure uses the native/efficient TDS protocol to return data; Azure Tables use JSON format, which is more verbose
Joins / Filters in SQL Azure will be very fast as long as you are using primary keys or have indexes in SQL Azure; Azure Tables do not have indexes and joins must be performed client side
Limitations in the number of records returned by Azure Tables (1,000 records at a time) means you need to implement multiple roundtrips to fetch many records
Although you can fake indexes in Azure Tables by creating additional tables that hold a custom-built index, you own the responsibility of maintaining that index, which will slow your operations and possibly create orphan scenarios if you are not careful.
Last but not least, using Azure Tables usually makes sense when you are trying to reduce your storage costs (it is cheaper than SQL Azure) and when you need more storage than what SQL Azure can offer (although you can now use Federations to break the single database maximum storage limitation). For example, if you need to store 1 billion customer records, using Azure Table may make sense. But using Azure Tables for increase speed alone is rather suspicious in my mind.
If I were in your shoes I would question that claim very hard and make sure you have expert SQL development skills on staff that can demonstrate you are reaching performance bottlenecks inherent of SQL Server/SQL Azure before changing your architecture entirely.
In addition, I would define what your performance objectives are. Are you looking at 100x faster access times? Did you consider caching instead? Are you using indexing properly in your database?
My 2 cents... :)
I won't try to argue on the exact definition of CQRS. As we are talking about Azure, I'll use it's docs as a reference. From there we can find that:
CQRS doesn't necessary requires that you use a separate read storage.
For greater isolation, you can physically separate the read data from the write data.
"you can" doesn't mean "you must".
About denormalization and read optimization:
Although
The read model of a CQRS-based system provides materialized views of the data, typically as highly denormalized views
the key point is
the read database can use its own data schema that is optimized for queries
It can be a different schema, but it can still be normalized or at least not "highly denormalized". Again - you can, but that doesn't mean you must.
More than that, if you performance is poor due to write locks and not because of heavy SQL requests:
The read store can be a read-only replica of the write store
And when we talk about request's optimization, it's better to talk more about requests themselves, and less about storage types.
About "it reads from either" [...]
The Materialized View pattern describes generating prepopulated views of data in environments where the source data isn't in a suitable format for querying, where generating a suitable query is difficult, or where query performance is poor due to the nature of the data or the data store.
Here the key point is that views are plural.
A materialized view can even be optimized for just a single query.
...
Materialized views tend to be specifically tailored to one, or a small number of queries
So you choice is not between those 3 options. It's much wider actually.
And again, you don't need another storage to create views. All can be done inside a single DB.
About
My gut says the normalized (At least to some extent) data in Table Storage would be the way to go; however I am worried it will reduce the performance gains to conduct 3 queries in order to grab all the data for a user.
Yes, of course, performance will suffer! (Also consider the matter of consistency). But will it be OK or not you can never be sure until you test it. With your data and your requests. Because delays in data transfers can actually be less than time required for some elaborate SQL-request.
So all boils down to:
What features do you need and which of them Table Storage and/or SQL Azure have?
And then, how much will it cost?
These you can only answer yourself. And these choices have little to do with performance. Because if there is a suitable index in either of those, I believe the performance will be virtually indistinguishable.
To sum up:
SQL Azure or Azure Table Storage?
For different requests and data you can and you probably should use both. But there is too little information in the question to give you the exact answer (we need an exact request for that). But I agree with #HerveRoggero - most probably you should stick with SQL Azure.
I am not sure if I can add any value to other answers, but I want to draw your attention toward modeling the data storage based on your query paths. Are you going to query all the mentioned data bits together? Is the user going to ask for some of it as additional information after a click or something? I am assuming that you have thought about this question already, and you are positive that you want to query everything in one go. i.e., the API or something needs to return all this information at once.
In that case, nothing will beat querying a single object by key. If you are talking about Azure's Table Storage specifically, it says right there that it's a key-value store. I am curious whether you have considered the document database (e.g. Cosmos DB) instead? If you are implementing CQRS read models, you could generate a single document per user that has all information that a user sees on a feed. You query that document by user id, which would be the key. This approach would be the optimal CQRS implementation in my mind because, after all, you are aiming to implement read models. Unless I misinterpreted something in your question or you have strong reasons to not go with document databases.