I am not getting it but below part is taken from the sudo crontab -e but none of the commands are executed as scheduled. I tried with sudo and without (last should be correct, as it runs as root). If I execute the commands manually with sudo, all three do work.
# create SD backup every Wed at 1am:
0 1 * * 3 sudo sh /home/pi/bkup_rpimage/bkup_rpimage.sh start -c /media/pi/RaspiSDBack/rpi_$(date +%Y-%m-%d).img
# copy SD backup to NAS every 15th at 4-30 am:
30 4 15 * * sudo cp -n -r /media/pi/RaspiSDBack/* /home/pi/QNAP/PI_Backup/
# daily reboot at 4 am:
0 4 * * * sudo /sbin/shutdown -r +5
Anyone an idea? I am new to this and can't get any further, currently.
I have a server running Linux operating system. I am trying to schedule a cron job, in crontab file, to run a task every two weeks (Fortnight) on Tuesday at 9 am. I tried to run the following command:
0 9 * * 2 root test $((10#$(date +\%V)\%2)) -eq 0 && ( java -jar /email/emailRemind.jar )
This script does not work, it shows this message
/bin/sh: 1: arithmetic expression: expecting EOF: 10#24%2"
Any thoughts?
I'm setting up a office computer to show X website from 6AM to 6PM and then turn off the monitor (Samsung TV) at 6PM and on again at 6AM by using crontab and bash scripts for the job.
Executing the scripts works fine both from the command line and from crontab but after a few hours of running the website the monitor goes to sleep.
This might be to me being a novice on linux and scripting but any help would be appreciated.
I'm running ubuntu 18.04 turned off "Dim screen when inactive", "Blank screen", "Automatic suspend" and "Screen lock" in settings>privacy/power
I've tested the scripts functionality with 5 minutes intervals in crontab and it works fine but when I run it for several hours it fails.
Script for showing the website
#!/bin/bash
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
export DISPLAY=:0.0
firefox -height 1080 -width 1920 google.com &
win=$(xdotool search --onlyvisible --class firefox | head -1)
while [ "$win" == "" ]; do
win=$(xdotool search --onlyvisible --class firefox | head -1)
sleep 0.1
done
sleep 10
xdotool key --window=${win} F11
sleep 5
xdotool key Page_Down
sleep 12h
killall firefox
exit 0
Script for turning the screen on
#!/bin/bash
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
export DISPLAY=:0.0
xset dpms force on
Script for turning the screen off
#!/bin/bash
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
export DISPLAY=:0.0
sleep 1; xset dpms force off
0 6 * * 1-5 /bin/bash /home/acte/startDisplay.sh
1 6 * * 1-5 /bin/bash /home/acte/hallScript.sh
2 18 * * 1-5 /bin/bash /home/acte/stopDisplay.sh
Crontab file
0 6 * * 1-5 /bin/bash /home/acte/startDisplay.sh
1 6 * * 1-5 /bin/bash /home/acte/hallScript.sh
2 18 * * 1-5 /bin/bash /home/acte/stopDisplay.sh
So from the crontab file I expect the computer to turn the monitor on at 6AM and then at 6:01AM run my script to visit the website, show that website until 6:01PM when the script exit and then turn the monitor off at 6:02 PM - rinse & repeat
I need some help in writing a Linux script that do the following:
command 1
command 2
wait 10 minutes
command 3
command 4
and this script should run automatically at specific time for example 4 am...
Thank in advance
You can create a script.sh like:
#!/bin/bash
command 1
command 2
sleep 600 # 600 seconds = 10 min
command 3
command 4
And then create a cronjob:
0 4 * * * /bin/bash /path/to/script.sh
You can see more info of cron in https://stackoverflow.com/tags/cron/info
if you want the job to run once at a future time, instead of cron use at
at 4am tomorrow <<END
command 1
command 2
sleep 600
command 3
command 4
END
One of the advantages of at is that it will execute the commands using your current environment. The limited environment provided by cron is a cause of confusion for many people.
I have a crontab running every hour. The user running it has environment variabless in the .bash_profile that work when the user runs the job from the terminal, however, obviously these don't get picked up by crontab when it runs.
I've tried setting them in .profile and .bashrc but they still don't seem to get picked up. Does anyone know where I can put environment vars that crontab can pick up?
You can define environment variables in the crontab itself when running crontab -e from the command line.
LANG=nb_NO.UTF-8
LC_ALL=nb_NO.UTF-8
# m h dom mon dow command
* * * * * sleep 5s && echo "yo"
This feature is only available to certain implementations of cron. Ubuntu and Debian currently use vixie-cron which allows these to be declared in the crontab file (also GNU mcron).
Archlinux and RedHat use cronie which does not allow environment variables to be declared and will throw syntax errors in the cron.log. Workaround can be done per-entry:
# m h dom mon dow command
* * * * * export LC_ALL=nb_NO.UTF-8; sleep 5s && echo "yo"
I got one more solution for this problem:
0 5 * * * . $HOME/.profile; /path/to/command/to/run
In this case it will pick all the environment variable defined in your $HOME/.profile file.
Of course $HOME is also not set, you have to replace it with the full path of your $HOME.
Setting vars in /etc/environment also worked for me in Ubuntu. As of 12.04, variables in /etc/environment are loaded for cron.
Have 'cron' run a shell script that sets the environment before running the command.
Always.
# #(#)$Id: crontab,v 4.2 2007/09/17 02:41:00 jleffler Exp $
# Crontab file for Home Directory for Jonathan Leffler (JL)
#-----------------------------------------------------------------------------
#Min Hour Day Month Weekday Command
#-----------------------------------------------------------------------------
0 * * * * /usr/bin/ksh /work1/jleffler/bin/Cron/hourly
1 1 * * * /usr/bin/ksh /work1/jleffler/bin/Cron/daily
23 1 * * 1-5 /usr/bin/ksh /work1/jleffler/bin/Cron/weekday
2 3 * * 0 /usr/bin/ksh /work1/jleffler/bin/Cron/weekly
21 3 1 * * /usr/bin/ksh /work1/jleffler/bin/Cron/monthly
The scripts in ~/bin/Cron are all links to a single script, 'runcron', which looks like:
: "$Id: runcron.sh,v 2.1 2001/02/27 00:53:22 jleffler Exp $"
#
# Commands to be performed by Cron (no debugging options)
# Set environment -- not done by cron (usually switches HOME)
. $HOME/.cronfile
base=`basename $0`
cmd=${REAL_HOME:-/real/home}/bin/$base
if [ ! -x $cmd ]
then cmd=${HOME}/bin/$base
fi
exec $cmd ${#:+"$#"}
(Written using an older coding standard - nowadays, I'd use a shebang '#!' at the start.)
The '~/.cronfile' is a variation on my profile for use by cron - rigorously non-interactive and no echoing for the sake of being noisy. You could arrange to execute the .profile and so on instead. (The REAL_HOME stuff is an artefact of my environment - you can pretend it is the same as $HOME.)
So, this code reads the appropriate environment and then executes the non-Cron version of the command from my home directory. So, for example, my 'weekday' command looks like:
: "#(#)$Id: weekday.sh,v 1.10 2007/09/17 02:42:03 jleffler Exp $"
#
# Commands to be done each weekday
# Update ICSCOPE
n.updics
The 'daily' command is simpler:
: "#(#)$Id: daily.sh,v 1.5 1997/06/02 22:04:21 johnl Exp $"
#
# Commands to be done daily
# Nothing -- most things are done on weekdays only
exit 0
If you start the scripts you are executing through cron with:
#!/bin/bash -l
They should pick up your ~/.bash_profile environment variables
Expanding on #carestad example, which I find easier, is to run the script with cron and have the environment in the script.
In crontab -e file:
SHELL=/bin/bash
*/1 * * * * $HOME/cron_job.sh
In cron_job.sh file:
#!/bin/bash
source $HOME/.bash_profile
some_other_cmd
Any command after the source of .bash_profile will have your environment as if you logged in.
Whatever you set in crontab will be available in the cronjobs, both directly and using the variables in the scripts.
Use them in the definition of the cronjob
You can configure crontab so that it sets variables that then the can cronjob use:
$ crontab -l
myvar="hi man"
* * * * * echo "$myvar. date is $(date)" >> /tmp/hello
Now the file /tmp/hello shows things like:
$ cat /tmp/hello
hi man. date is Thu May 12 12:10:01 CEST 2016
hi man. date is Thu May 12 12:11:01 CEST 2016
Use them in the script run by cronjob
You can configure crontab so that it sets variables that then the scripts can use:
$ crontab -l
myvar="hi man"
* * * * * /bin/bash /tmp/myscript.sh
And say script /tmp/myscript.sh is like this:
echo "Now is $(date). myvar=$myvar" >> /tmp/myoutput.res
It generates a file /tmp/myoutput.res showing:
$ cat /tmp/myoutput.res
Now is Thu May 12 12:07:01 CEST 2016. myvar=hi man
Now is Thu May 12 12:08:01 CEST 2016. myvar=hi man
...
For me I had to set the environment variable for a php application. I resolved it by adding the following code to my crontab.
$ sudo crontab -e
crontab:
ENVIRONMENT_VAR=production
* * * * * /home/deploy/my_app/cron/cron.doSomethingWonderful.php
and inside doSomethingWonderful.php I could get the environment value with:
<?php
echo $_SERVER['ENVIRONMENT_VAR']; # => "production"
I hope this helps!
Instead of
0 * * * * sh /my/script.sh
Use bash -l -c
0 * * * * bash -l -c 'sh /my/script.sh'
You can also prepend your command with env to inject Environment variables like so:
0 * * * * env VARIABLE=VALUE /usr/bin/mycommand
Expanding on #Robert Brisita has just expand , also if you don't want to set up all the variables of the profile in the script, you can select the variables to export on the top of the script
In crontab -e file:
SHELL=/bin/bash
*/1 * * * * /Path/to/script/script.sh
In script.sh
#!/bin/bash
export JAVA_HOME=/path/to/jdk
some-other-command
I'm using Oh-my-zsh in my macbook so I've tried many things to get the crontab task runs but finally, my solution was prepending the .zshrc before the command to run.
*/30 * * * * . $HOME/.zshrc; node /path/for/my_script.js
This task runs every 30 minutes and uses .zshrc profile to execute my node command.
Don't forget to use the dot before the $HOME var.
I tried most of the provided solutions, but nothing worked at first. It turns out, though, that it wasn't the solutions that failed to work. Apparently, my ~/.bashrc file starts with the following block of code:
case $- in
*i*) ;;
*) return;;
esac
This basically is a case statement that checks the current set of options in the current shell to determine that the shell is running interactively.
If the shell happens to be running interactively, then it moves on to sourcing the ~/.bashrc file.
However, in a shell invoked by cron, the $- variable doesn't contain the i value which indicates interactivity.
Therefore, the ~/.bashrc file never gets sourced fully. As a result, the environment variables never got set.
If this happens to be your issue, feel free to comment out the block of code as follows and try again:
# case $- in
# *i*) ;;
# *) return;;
# esac
I hope this turns out useful
Unfortunately, crontabs have a very limited environment variables scope, thus you need to export them every time the corntab runs.
An easy approach would be the following example, suppose you've your env vars in a file called env, then:
* * * * * . ./env && /path/to_your/command
this part . ./env will export them and then they're used within the same scope of your command
Another way - inspired by this this answer - to "inject" variables is the following (fcron example):
%daily 00 12 \
set -a; \
. /path/to/file/containing/vars; \
set +a; \
/path/to/script/using/vars
From help set:
-a Mark variables which are modified or created for export.
Using + rather than - causes these flags to be turned off.
So everything in between set - and set + gets exported to env and is then available for other scripts, etc. Without using set the variables get sourced but live in set only.
Aside from that it's also useful to pass variables when a program requires a non-root account to run but you'd need some variables inside that other user's environment. Below is an example passing in nullmailer vars to format the e-mail header:
su -s /bin/bash -c "set -a; \
. /path/to/nullmailer-vars; \
set +a; \
/usr/sbin/logcheck" logcheck
All the above solutions work fine.
It will create issues when there are any special characters in your environment variable.
I have found the solution:
eval $(printenv | awk -F= '{print "export " "\""$1"\"""=""\""$2"\"" }' >> /etc/profile)
For me I had to specify path in my NodeJS file.
// did not work!!!!!
require('dotenv').config()
instead
// DID WORK!!
require('dotenv').config({ path: '/full/custom/path/to/your/.env' })
I found this issue while looking at a similar problem that matched the title, but I am stuck with the environment file syntax that systemd or docker use:
FOO=bar
BAZ=qux
This won't work for Vishal's excellent answer because they aren't bash scripts (note the lack of export).
The solution I've used is to read each line into xargs and export them before running the command:
0 5 * * * export $(xargs < $HOME/.env); /path/to/command/to/run
Set Globally env
sudo sh -c "echo MY_GLOBAL_ENV_TO_MY_CURRENT_DIR=$(pwd)" >> /etc/environment"
Add scheduled job to start a script
crontab -e
*/5 * * * * sh -c "$MY_GLOBAL_ENV_TO_MY_CURRENT_DIR/start.sh"
=)
what worked for me (debian based):
create a file with all the needed env var :
#!/bin/bash
env | grep VAR1= > /etc/environment
env | grep VAR2= >> /etc/environment
env | grep VAR3= >> /etc/environment
then build the crontab content, by calling the env file before calling the script that needs it, therefore start the cron service
(crontab -l ; echo '* * * * * . /etc/environment; /usr/local/bin/python /mycode.py >> /var/log/cron-1.log 2>&1') | crontab
service cron start
nb : for python use case, be sure to call the whole python path, else wrong python could be invocated, generating non-sense syntax error