I copied a container to another storage account based on the document linked below.
(DataLake Storage Gen2).
When trying, I got the following error:
this request not authorized to perform this operations using this permission
https://learn.microsoft.com/en-us/azure/storage/common/storage-use-azcopy-v10
If you are using AAD Token, this error is telling you that you need to add a role assignment to the user. Please go to Storage account -> Access Control -> Add -> Add role assignment, then add Storage Blob Data Owner to your login account.
If this problem persists, please provide more details.
I also faced the same problem. For me to work I just log out and log in again on the azcopy cli after doing the #BowmanZhu solution
azcopy logout
azcopy login --tenant-id xxxx-xxxx-xxxx
If you don't want to login that way there is always the option to add a SAS token at the end of the URL. If you don't want to attach the token always at the end you can try for permanent access by going through any one of these steps you find in the official documentation page.
After granting myself with role Storage Blob Data Owner on the container, then AzCopy will now behave itself and succeed in copying a file to the blob storage container.
go to storageaccount -> container -> Access control rules -> add role assignement -> Storage Blob Data Owner
In my case, my azure storage account vnet address was blocking the azcopy from copying the data over the storage account.
I added my client IP to allow a firewall address.
The SAS token has probably expired.
When I had this, I discovered it was because I'd used Azure Storage Explorer to generate a SAS that didn't have read permission, and I think it was trying to read the size/existence of a blob before writing it.
I got a clue from https://github.com/Azure/azure-storage-azcopy/issues/790 but ultimately I just regenerated a new SAS with read permission and it worked out..
I probably could ahve looked to modify the C# code using Azure Data Movement lib, to not perform a length check, but the spec was later changed to "don't overwrite" so the read permissions are probably needed anyway
Give appropriate permissions(read, write, create) while generating SAS tokens
as here
Had a similar issue. That's how was resolved
Command used was .\azcopy.exe copy "C:\Users\kriof\Pictures" "https://test645676535storageaccount.blob.core.windows.net/images?sp=rw&st=2022-02-23T11:03:50Z&se=2022-02-23T19:03:50Z&spr=https&sv=2020-08-04&sr=c&sig=QRN%2SMFtU3zaUdd4adRddNFjM2K4ik7tNPSi2WRL0%3D"
SAS token had default(Read) permission only. Adding Write permission
in Azure Portal, resolved the issue.
Related
The ADF Pipeline release to the test Data Factory instance is failing with the following error as shown in the image below.
So, to overcome the above issue, I modified the pipeline by adding an additional step of Azure Blob File Copy to store the linked templates in a storage account and reference it in the pipeline to use it for the deployment. However when I made the above change I am getting another error which states InvalidContentLink: Unable to download deployment content from 'https://xxx.blob.core.windows.net/adf-arm-templates/ArmTemplate_0.json?***Sanitized Azure Storage Account Shared Access Signature***'. The tracking Id is 'xxxxx-xxxx-x-xxxx-xx'. Please see https://aka.ms/arm-deploy for usage details.
I have tried using the SAS token for both at the Container level and at the Storage Account level. I also have ensured that the agent and the storage account are under same VNets. I have also tried to remove the firewall restrictions but still it gives me the same InvalidContentLink error.
The modified pipeline with the Azure Storage Account step :
How do I resolve this issue?
InvalidContentLink: Unable to download deployment content from 'https://xxx.blob.core.windows.net/adf-arm-templates/ArmTemplate_0.json?Sanitized Azure Storage Account Shared Access Signature'. The tracking Id is 'xxxxx-xxxx-x-xxxx-xx'. Please see https://aka.ms/arm-deploy for usage details.
This error can cause because of you are trying to link which might not present in storage account.
Make sure you provide correct URl for the nested template that is accessible.
Also, if your storage account has firewall rule you can't link nested template from it.
Make sure your Storage Account, Container and Blob are publicly available. To achieve this:
Provide a Blob level Shared Access Signature URL. select the file click on"..." and then Click on Generate SAS.
refer for more understanding about nested template.
The Error I am getting
I tried to follow this link:
List folder in Azure Gen2 storage account with sas
following above link from postman and I am getting authorization error. what else should be added in header?
I got same error in my environment; I just add below details. Now it’s working fine in postman
Go to azure storage account gen2 -> click on access control -> click on add ->add role assignment and select contributor as role, then select your service principle and save.
SAS token Syntax
https://<StorageURL>/<Container>?directory=<DirectoryName>&restype=container&comp=list&<SASToken>
For more information follow this SO thread by Ivan Yang and this reference link
I'm trying to configure and use the Azure Data Explorer OneClick Ingest from blob container (continous ingest).
Whatever I try the URL is never accepted, I always end up with this error:
Invalid URL. Either the URL leads to a blob instead of a container, or the permissions are incorrect. If you just grant permission, please wait couple of minutes and try again.
The URL I'm using follow that pattern:
https://mystorageaccount.blob.core.windows.net/mycontainer?sp=rl&st=2022-04-26T22:01:42Z&se=2032-04-27T06:01:42Z&spr=https&sv=2020-08-04&sr=c&sig=Z4Mlh7s5%2Fm1890kdfzlkYLSIHHDdGJmTSyYXVYsHdn01o%3D
I'm probably missing something, either in the URL syntax ou SAS generation.
Has anyone successfully used it? Any idea what could be wrong?
Thanks
I finally found out what was the issue.
Probably due to the security in place on my Storage account I had to create in Azure Data Explorer Networking panel, a Managed private enpoint, pointing to my storage resource (and then approve that endpoint in the storage account Networking)
https://learn.microsoft.com/en-us/azure/data-explorer/security-network-managed-private-endpoint-create
I'm connecting ADF to blob storage v2 using a managed identity following this doc: Doc1
When it comes to test the connection with my first dataset, I am successful when I test the connection to the linkedservice. When I try by the filepath, and enter "testfolder" (which exists in the blob) it fails returning a generic forbidden error displayed at the end of this post.
However, when I opt to "browse" the folders in the dataset portal, the folder "testfolder" does show up. But when I select it, it will not show me anything within that folder.
The Data Factory managed instance is given the role of Contributor, granting full access to manage all resources. Is there some other hidden issue or possible way to narrow down the issue? My instinct is that this is something within the blob container since I can view the containers, but not their contents.
Error message:
It seems that you don't give the role of azure blob storage.
Please fellow this:
1.click IAM in azure blob storage,navigate to Role assignments and add role assignment.
2.choose role according your need and select your data factory.
3.A few minute later,you can retry to choose file path.
Hope this can help you.
Hello recently I have been in the process of trying to use this azure graph request noted here
https://learn.microsoft.com/en-us/graph/api/user-exportpersonaldata?view=graph-rest-1.0&tabs=http
Now when you do that request as stated in it you provide a storage location which is, "This is a shared access signature (SAS) URL to an Azure Storage account, to where data should be exported."
Every time I provide by SAS url I get this error, "Storage destination needs to have a Service SAS, not an Account SAS"
Can someone please help me understand what this means? The documentation it links is not clear.
Storage destination needs to have a Service SAS, not an Account SAS
Difference between Account SAS and Service SAS is described here: https://learn.microsoft.com/en-us/rest/api/storageservices/delegate-access-with-shared-access-signature#types-of-shared-access-signatures.
You're providing an SAS URL for the entire account (e.g. https://account.blob.core.windows.net/?sas-parameters) whereas it is expected that you provide a SAS URL for a specific blob container (e.g. https://account.blob.core.windows.net/blob-container/?sas-parameters).
There are two possible solutions:
Create a SAS URL for a specific blob container. Or in other words create a Service SAS as the error message is telling you to do. You can do so using a tool like Microsoft Storage Explorer.
Insert the blob container name in your account SAS URL so that it looks like something like this https://account.blob.core.windows.net/blob-container/?sas-parameters.
Please note that if you're using an Account SAS, it should at least have Write permission on Object for Blob service.