Would like to insert line number at specific location in file
e.g.
apple
ball
should be
(1) apple
(2) ball
Using command
sed '/./=' <FileName>| sed '/./N; s/\n/ /'
It generates
1 Apple
2 Ball
1st solution: This should be an easy task for awk.
awk '{print "("FNR") "$0}' Input_file
2nd solution: With pure sed as per OP's attempt try:
sed '=' Input_file | sed 'N; s/^/(/;s/\n/) /'
Easy to do with perl instead:
perl -ne 'print "($.) $_"' foo.txt
If you want to modify the file in-place instead of just printing out the numbered lines on standard output:
perl -ni -e 'print "($.) $_"' foo.txt
Many ways are there to insert line numbers in a file
some of them are :-
1.Using cat command
cat -n file.txt > newfile.txt
2.Using nl command
nl -b a file.txt
Awk and perl both are very usefull and powerfull. But if, like me, you are reluctant to learn yet another programming language, you can complete this task with the bash commands you probably know already.
With bash you can
increment a sequence number n: $((++n))
read all lines from a file foo into a variable l: while read -r l;do ...;done <foo, where the option -r serves to treat backslashes as just characters.
print formatted output to a line: printf "plain text %i %s\n" number string
Now suppose you want to enclose your sequence number in parentheses, and format them to 8 digits with leading zeroes, then you combine all this to get:
n=0;while read -r l;do printf "(%08i) %s\n" $((++n)) "$l";done <foo >numberedfoo
Note that you do not need to initialize the variable n to use it as a sequence number further on. But if you experiment with this command a few times without reinitializing n, your lines will be numbered from where your previous try stopped incrementing.
Finally, if you don't like the C-like formatting syntax of printf, just use plain echo, and leave the formatting to bash variable expansion. Here is how to format a number like in the command above (do type a space before the -, and a ; before the echo) :
nformat="0000000$n"; echo "(${nformat: -8}) ...";
Related
I have a file with different word in each line.
My goal is to replace the first character to a capital letter and replace the 3rd character to "#".
For example: football will be exchanged to Foo#ball.
I tried thinking about using awk and sed.It didn't help me since (to my knowledge) sed needs an exact character input and awk can print the desired character but not change it.
With GNU sed and two s commands:
echo 'football' | sed -E 's/(.)/\U\1/; s/(...)./\1#/'
Output:
Foo#ball
See: 3.3 The s Command, 5.7 Back-references and Subexpressions and 5.9.2 Upper/Lower case conversion
This might work for you (GNU sed):
sed 's/\(...\)./\u\1#/' file
With bash you can use parameter expansions alone to accomplish the task. For example, if you read each line into the variable line, you can do:
line="${line^}" # change football to Football (capitalize 1st char)
line="${line:0:3}#${line:4}" # make 4th character '#'
Example Input File
$ cat file
football
soccer
baseball
Example Use/Output
$ while read -r line; do line="${line^}"; echo "${line:0:3}#${line:4}"; done < file
Foo#ball
Soc#er
Bas#ball
While shell is typically slower, when use is limited to builtins, it doesn't fall too far behind.
(note: your question says 3rd character, but your example replaces the 4th character with '#')
With GNU awk for the 3rd arg to match():
$ echo 'football' | awk 'match($0,/(.)(..).(.*)/,a){$0=toupper(a[1]) a[2] "#" a[3]} 1'
Foo#ball
Cyrus' or Potong's answers are the preferred ones. (For Linux or systems with GNU sed because of \U or \u.)
This is just an additional solution with awk because you mentioned it and used also awk tag:
$ echo 'football'|awk '{a=substr($0,1,1);b=substr($0,2,2);c=substr($0,5);print toupper(a)b"#"c}'
Foo#ball
This is a most simple solution without RegEx. It will also work on non-GNU awk.
This should work with any version of awk:
awk '{
for(i=1;i<=NF;i++){
# Note that string indexes start at 1 in awk !
$i=toupper(substr($i,1,1)) "" substr($i,2,1) "#" substr($i,3)
}
print
}' file
Note: If a word is less than 3 characters long, like it, it will be printed as It#
if your data in 'd' file, tried on gnu sed:
sed -E 's/^(\w)(\w\w)\w/\U\1\E\2#/' d
I have a input file
1.txt
joshwin_xc8#yahoo.com:1802752:2222:
ihearttofurkey#yahoo.com:1802756:111113
www.rothmany#mail.com:xxmyaduh:13#;:3A
and I want an output file:
out.txt
joshwin_xc8#yahoo.com||o||1802752||o||2222:
ihearttofurkey#yahoo.com||o||1802756||o||111113
www.rothmany#mail.com||o||xxmyaduh||o||13#;:3A
I want to replace the first two ':' in 1.txt with '||o||', but with the script I am using
awk -F: '{print $1,$2,$3}' OFS="||o||" 3.txt
But it is not giving the expected output.
Any help would be highly appreciated.
Perl solution:
perl -pe 's/:/||o||/ for $_, $_' 1.txt
-p reads the input line by line and prints each line after processing it
s/// is similar to substitution you might know from sed
for in postposition runs the previous command for every element in the following list
$_ keeps the line being processed
For higher numbers, you can use for ($_) x N where N is the number. For example, to substitute the first 7 occurrences:
perl -pe 's/:/||o||/ for ($_) x 7' 1.txt
Following sed may also help you in same.
sed 's/:/||o||/;s/:/||o||/' Input_file
Explanation: Simply substituting 1st occurrence of colon with ||o|| and then 2nd occurrence of colon now becomes 1st occurrence of colon now and substituting that colon with ||o|| as per OP's requirement.
Perl solution also, but I think the idea can apply to other languages: using the limit parameter of split:
perl -nE 'print join q(||o||), split q(:), $_, 3' file
(q quotes because I'm on Windows)
Suppose if we need to replace first 2 occurrence of : use below code
Like this you can change as per your requirement suppose if you need to change for first 7 occurences change {1..2} to {1..7}.
Out put will be saved in orginal file. it wont display the output
for i in {1..2}
> do
> sed -i "s/:/||o||/1" p.txt
> done
I am new to shell scripting. I am using ksh.
I have this particular line in my script which I use to append text in a variable q to the end of a particular line given by the variable a
containing the line number .
sed -i ''$a's#$#'"$q"'#' test.txt
Now the variable q can contain a large amount of text, with all sorts of special characters, such as !##$%^&*()_+:"<>.,/;'[]= etc etc, no exceptions. For now, I use a couple of sed commands in my script to remove any ' and " in this text (sed "s/'/ /g" | sed 's/"/ /g'), but still when I execute the above command I get the following error
sed: -e expression #1, char 168: unterminated `s' command
Any sed, awk, perl, suggestions are very much appreciated
The difficulty here is to quote (escape) the substitution separator characters # in the sed command:
sed -i ''$a's#$#'"$q"'#' test.txt
For example, if q contains # it will not work. The # will terminate the replacement pattern prematurely. Example: q='a#b', a=2, and the command expands to
sed -i 2s#$#a#b# test.txt
which will not append a#b to the end of line 2, but rather a#.
This can be solved by escaping the # characters in q:
sed -i 2s#$#a\#b# test.txt
However, this escaping could be cumbersome to do in shell.
Another approach is to use another level of indirection. Here is an example of using a Perl one-liner. First q is passed to the script in quoted form. Then, within the script the variable assigned to a new internal variable $q. Using this approach there is no need to escape the substitution separator characters:
perl -pi -E 'BEGIN {$q = shift; $a = shift} s/$/$q/ if $. == $a' "$q" "$a" test.txt
Do not bother trying to sanitize the string. Just put it in a file, and use sed's r command to read it in:
echo "$q" > tmpfile
sed -i -e ${a}rtmpfile test.txt
Ah, but that creates an extra newline that you don't want. You can remove it with:
sed -e ${a}rtmpfile test.txt | awk 'NR=='$a'{printf $0; next}1' > output
Another approach is to use the patch utility if present in your system.
patch test.txt <<-EOF
${a}c
$(sed "${a}q;d" test.txt)$q
.
EOF
${a}c will be replaced with the line number followed by c which means the operation is a change in line ${a}.
The second line is the replacement of the change. This is the concatenated value of the original text and the added text.
The sole . means execute the commands.
Say I have some arbitrary multi-line text file:
sometext
moretext
lastline
How can I remove only the last character (the e, not the newline or null) of the file without making the text file invalid?
A simpler approach (outputs to stdout, doesn't update the input file):
sed '$ s/.$//' somefile
$ is a Sed address that matches the last input line only, thus causing the following function call (s/.$//) to be executed on the last line only.
s/.$// replaces the last character on the (in this case last) line with an empty string; i.e., effectively removes the last char. (before the newline) on the line.
. matches any character on the line, and following it with $ anchors the match to the end of the line; note how the use of $ in this regular expression is conceptually related, but technically distinct from the previous use of $ as a Sed address.
Example with stdin input (assumes Bash, Ksh, or Zsh):
$ sed '$ s/.$//' <<< $'line one\nline two'
line one
line tw
To update the input file too (do not use if the input file is a symlink):
sed -i '$ s/.$//' somefile
Note:
On macOS, you'd have to use -i '' instead of just -i; for an overview of the pitfalls associated with -i, see the bottom half of this answer.
If you need to process very large input files and/or performance / disk usage are a concern and you're using GNU utilities (Linux), see ImHere's helpful answer.
truncate
truncate -s-1 file
Removes one (-1) character from the end of the same file. Exactly as a >> will append to the same file.
The problem with this approach is that it doesn't retain a trailing newline if it existed.
The solution is:
if [ -n "$(tail -c1 file)" ] # if the file has not a trailing new line.
then
truncate -s-1 file # remove one char as the question request.
else
truncate -s-2 file # remove the last two characters
echo "" >> file # add the trailing new line back
fi
This works because tail takes the last byte (not char).
It takes almost no time even with big files.
Why not sed
The problem with a sed solution like sed '$ s/.$//' file is that it reads the whole file first (taking a long time with large files), then you need a temporary file (of the same size as the original):
sed '$ s/.$//' file > tempfile
rm file; mv tempfile file
And then move the tempfile to replace the file.
Here's another using ex, which I find not as cryptic as the sed solution:
printf '%s\n' '$' 's/.$//' wq | ex somefile
The $ goes to the last line, the s deletes the last character, and wq is the well known (to vi users) write+quit.
After a whole bunch of playing around with different strategies (and avoiding sed -i or perl), the best way i found to do this was with:
sed '$! { P; D; }; s/.$//' somefile
If the goal is to remove the last character in the last line, this awk should do:
awk '{a[NR]=$0} END {for (i=1;i<NR;i++) print a[i];sub(/.$/,"",a[NR]);print a[NR]}' file
sometext
moretext
lastlin
It store all data into an array, then print it out and change last line.
Just a remark: sed will temporarily remove the file.
So if you are tailing the file, you'll get a "No such file or directory" warning until you reissue the tail command.
EDITED ANSWER
I created a script and put your text inside on my Desktop. this test file is saved as "old_file.txt"
sometext
moretext
lastline
Afterwards I wrote a small script to take the old file and eliminate the last character in the last line
#!/bin/bash
no_of_new_line_characters=`wc '/root/Desktop/old_file.txt'|cut -d ' ' -f2`
let "no_of_lines=no_of_new_line_characters+1"
sed -n 1,"$no_of_new_line_characters"p '/root/Desktop/old_file.txt' > '/root/Desktop/my_new_file'
sed -n "$no_of_lines","$no_of_lines"p '/root/Desktop/old_file.txt'|sed 's/.$//g' >> '/root/Desktop/my_new_file'
opening the new_file I created, showed the output as follows:
sometext
moretext
lastlin
I apologize for my previous answer (wasn't reading carefully)
sed 's/.$//' filename | tee newFilename
This should do your job.
A couple perl solutions, for comparison/reference:
(echo 1a; echo 2b) | perl -e '$_=join("",<>); s/.$//; print'
(echo 1a; echo 2b) | perl -e 'while(<>){ if(eof) {s/.$//}; print }'
I find the first read-whole-file-into-memory approach can be generally quite useful (less so for this particular problem). You can now do regex's which span multiple lines, for example to combine every 3 lines of a certain format into 1 summary line.
For this problem, truncate would be faster and the sed version is shorter to type. Note that truncate requires a file to operate on, not a stream. Normally I find sed to lack the power of perl and I much prefer the extended-regex / perl-regex syntax. But this problem has a nice sed solution.
I have a file as below:
line1
line2
line3
And I want to get:
prefixline1
prefixline2
prefixline3
I could write a Ruby script, but it is better if I do not need to.
prefix will contain /. It is a path, /opt/workdir/ for example.
# If you want to edit the file in-place
sed -i -e 's/^/prefix/' file
# If you want to create a new file
sed -e 's/^/prefix/' file > file.new
If prefix contains /, you can use any other character not in prefix, or
escape the /, so the sed command becomes
's#^#/opt/workdir#'
# or
's/^/\/opt\/workdir/'
awk '$0="prefix"$0' file > new_file
In awk the default action is '{print $0}' (i.e. print the whole line), so the above is equivalent to:
awk '{print "prefix"$0}' file > new_file
With Perl (in place replacement):
perl -pi 's/^/prefix/' file
You can use Vim in Ex mode:
ex -sc '%s/^/prefix/|x' file
% select all lines
s replace
x save and close
If your prefix is a bit complicated, just put it in a variable:
prefix=path/to/file/
Then, you pass that variable and let awk deal with it:
awk -v prefix="$prefix" '{print prefix $0}' input_file.txt
Here is a hightly readable oneliner solution using the ts command from moreutils
$ cat file | ts prefix | tr -d ' '
And how it's derived step by step:
# Step 0. create the file
$ cat file
line1
line2
line3
# Step 1. add prefix to the beginning of each line
$ cat file | ts prefix
prefix line1
prefix line2
prefix line3
# Step 2. remove spaces in the middle
$ cat file | ts prefix | tr -d ' '
prefixline1
prefixline2
prefixline3
If you have Perl:
perl -pe 's/^/PREFIX/' input.file
Using & (the whole part of the input that was matched by the pattern”):
cat in.txt | sed -e "s/.*/prefix&/" > out.txt
OR using back references:
cat in.txt | sed -e "s/\(.*\)/prefix\1/" > out.txt
Using the shell:
#!/bin/bash
prefix="something"
file="file"
while read -r line
do
echo "${prefix}$line"
done <$file > newfile
mv newfile $file
While I don't think pierr had this concern, I needed a solution that would not delay output from the live "tail" of a file, since I wanted to monitor several alert logs simultaneously, prefixing each line with the name of its respective log.
Unfortunately, sed, cut, etc. introduced too much buffering and kept me from seeing the most current lines. Steven Penny's suggestion to use the -s option of nl was intriguing, and testing proved that it did not introduce the unwanted buffering that concerned me.
There were a couple of problems with using nl, though, related to the desire to strip out the unwanted line numbers (even if you don't care about the aesthetics of it, there may be cases where using the extra columns would be undesirable). First, using "cut" to strip out the numbers re-introduces the buffering problem, so it wrecks the solution. Second, using "-w1" doesn't help, since this does NOT restrict the line number to a single column - it just gets wider as more digits are needed.
It isn't pretty if you want to capture this elsewhere, but since that's exactly what I didn't need to do (everything was being written to log files already, I just wanted to watch several at once in real time), the best way to lose the line numbers and have only my prefix was to start the -s string with a carriage return (CR or ^M or Ctrl-M). So for example:
#!/bin/ksh
# Monitor the widget, framas, and dweezil
# log files until the operator hits <enter>
# to end monitoring.
PGRP=$$
for LOGFILE in widget framas dweezil
do
(
tail -f $LOGFILE 2>&1 |
nl -s"^M${LOGFILE}> "
) &
sleep 1
done
read KILLEM
kill -- -${PGRP}
Using ed:
ed infile <<'EOE'
,s/^/prefix/
wq
EOE
This substitutes, for each line (,), the beginning of the line (^) with prefix. wq saves and exits.
If the replacement string contains a slash, we can use a different delimiter for s instead:
ed infile <<'EOE'
,s#^#/opt/workdir/#
wq
EOE
I've quoted the here-doc delimiter EOE ("end of ed") to prevent parameter expansion. In this example, it would work unquoted as well, but it's good practice to prevent surprises if you ever have a $ in your ed script.
Here's a wrapped up example using the sed approach from this answer:
$ cat /path/to/some/file | prefix_lines "WOW: "
WOW: some text
WOW: another line
WOW: more text
prefix_lines
function show_help()
{
IT=$(CAT <<EOF
Usage: PREFIX {FILE}
e.g.
cat /path/to/file | prefix_lines "WOW: "
WOW: some text
WOW: another line
WOW: more text
)
echo "$IT"
exit
}
# Require a prefix
if [ -z "$1" ]
then
show_help
fi
# Check if input is from stdin or a file
FILE=$2
if [ -z "$2" ]
then
# If no stdin exists
if [ -t 0 ]; then
show_help
fi
FILE=/dev/stdin
fi
# Now prefix the output
PREFIX=$1
sed -e "s/^/$PREFIX/" $FILE
You can also achieve this using the backreference technique
sed -i.bak 's/\(.*\)/prefix\1/' foo.txt
You can also use with awk like this
awk '{print "prefix"$0}' foo.txt > tmp && mv tmp foo.txt
Using Pythonize (pz):
pz '"preix"+s' <filename
Simple solution using a for loop on the command line with bash:
for i in $(cat yourfile.txt); do echo "prefix$i"; done
Save the output to a file:
for i in $(cat yourfile.txt); do echo "prefix$i"; done > yourfilewithprefixes.txt
You can do it using AWK
echo example| awk '{print "prefix"$0}'
or
awk '{print "prefix"$0}' file.txt > output.txt
For suffix: awk '{print $0"suffix"}'
For prefix and suffix: awk '{print "prefix"$0"suffix"}'
For people on BSD/OSX systems there's utility called lam, short for laminate. lam -s prefix file will do what you want. I use it in pipelines, eg:
find -type f -exec lam -s "{}: " "{}" \; | fzf
...which will find all files, exec lam on each of them, giving each file a prefix of its own filename. (And pump the output to fzf for searching.)
If you need to prepend a text at the beginning of each line that has a certain string, try following. In the following example, I am adding # at the beginning of each line that has the word "rock" in it.
sed -i -e 's/^.*rock.*/#&/' file_name
SETLOCAL ENABLEDELAYEDEXPANSION
YourPrefix=blabla
YourPath=C:\path
for /f "tokens=*" %%a in (!YourPath!\longfile.csv) do (echo !YourPrefix!%%a) >> !YourPath!\Archive\output.csv