In Maximo 7.6.1.1/Spatial 7.6.0.5, there is text displayed in the top-left corner of the map by default:
The text is a concatenation of WONUM and DESCRIPTION.
Is it possible to configure this text so that it shows additional information?
Keyword: Maximo Spatial
I would query maxmessages for value like '%{0}%-%{1}%'. If the query finds data, look in msggroup and msgkey of the results for values that sound promising. (For support reasons, use the Maximo front-end, Database Configuration > Messages, to search for the group/key and change the value.) If you do not get results, there might be something down in your Maximo directory under IBM\SMP\maximo\applications\maximo\maximouiweb\webmodule\webclient possibly under a pluss directory.
Displaying information about the current record on the map as a label
https://www.ibm.com/support/knowledgecenter/en/SSG2D3_7.6.1/com.ibm.spl.doc/maps/t_display_record_info_on_map.html
Related
Does Drupal provides interchanged/partial word search for example: If i'm searching for "search term" should also return search result says that "term search".
Actually there's a quick way to set this up with the Search API and the Search API Database Search modules. No need for Solr.
Enable both the modules and go to the Search API configuration page
(admin/config/search/search_api)
Add a server and give it a recognizable name (such as "MySQL"), make sure it's enabled
Choose the following service class: Database service (normally the only option. If you don't see it, make sure that the "Search API Database Search" module is enabled).
Selecting this service class will provide you the option Search on parts of a word (make sure you enable it). Now hit "Create server". Next, go back to the Search API configuration page, and add an index. Again give it a recognizable name, such as "Contentindex", and make sure it's enabled.
Select the server you recently created (in this example "MySQL"). Datasource options: check the content types you want to index (the description of this field may be a bit confusing, but make no mistake: you should check the content types you want to index, not the ones you want to leave out).
You could check "Index items immediately", but that depends on the size of your content. This option is alright for smaller websites. In the other case: let cron take care of it. Hit "Create index".
Next, you want to enable the fields (in the fields tab) to that very index, e.g.: contant type, title, status and author - and hit "Save changes" (we'll take care of the related fields later).
Then you want to configure the filters (in the filter tab). Here you can enable the bundle filter, if you want to finetune the content types once again (probably won't need to).
Down below you'll find the highlight filter, to highlight the search word in the results.
Now return to the fields tab and unfold the "Add related fields" tab. Add all the fields of which you want to get the content indexed, and hit Save Finally go to the "view" tab of the index, and index now all the items.
The last step is to create search results page and search block in Views, which only takes a few minutes.
Make sure the submodule Search Views is enabled and create a view page which will show "Contentindex" (select the name you gave to your index configuration instead of "content" which is selected by default.
Add all the fields (make sure your format is "fields") that every search result should consist of (title [link to content], body, …).
You'll notice that these fields look like this Indexed Node: Title
Add an exposed filter: Search: Fulltext search; and select the following in its settings: Contains any of these words, and use as: Search keys.
You're done!
There's an excellent video tutorial on this partial search method without Solr, which also incorporates faceted search (which is not necessary for partial search, but in case you're interested…). If you're only looking for a partial search option, you can watch the video until 5:08 and after that skip to 6:45.
Reference:
https://www.drupal.org/node/84631
I'm using OpenSearchServer to provide search functionality on a web site. I want to crawl all pages on the site for links to follow but I want to exclude some pages from the index. I can't work out how to do this.
Specifically the website includes a shop that has its own product search and I am keeping this search for products and categories. The product pages have URLs like http://www.thesite/p/123 so I don't want to include any page like this in the search results. However some product pages reference background info pages and I want these to be included in the search index.
The problem I have is that the filter has no effect on the results - it doesn't filter out the /p/ and /c/ results. If I change the filter by unticking the negative box I get no results so it seems to be either the contents of the field or the filter criteria that is causing the problem.
I've tried adding a negative filter to the default query called search in the Query > Filter tab on the index with url:"http://www.thesite/p/*"
but it seems that wildcards are not supported for query filters although they are supported for Crawler > Exclusion list filters.
I've tried adding a new field called urlField in Schema > Fields and populating it using an analyzer configured using the Whitespace Tokenizer and a regular expression (http://www.thesite/(c|p)/). When I use the Test button it seems to generate two tokens for my test URL http://www.thesite/p/123:
http://www.thesite/p/
p
I'd hoped to be able to use the first one in a Query > Filter to exclude all the shop results and optionally be able to use the p (for product) or c (for category) if I need to search the product pages sometime in the future.
The urlShop field in the schema is set up as follows:
Indexed: yes
Stored: no (because I don't need the field back, just want to be able to filter on it)
TermVector: No
Analyzer: urlShop
Copy of: url
I've added urlFilter:"http://www.thesite/p/" to Query > Filters with the negative box ticked.
This seems to have no effect on the results when I use the default renderer.
To see whether it affects the returned results I unticked the negative box in the query filter I get no results in the default renderer. This leads me to believe that the urlShop field is not being populated but I'm not sure how to check this directly.
I would like to know whether there is an easier way to do this but if my approach makes sense in the context of OpenSearchServer please can you help me identify what's wrong?
The website is running under IIS and OpenSearchServer will be configured on the same server running in Tomcat.
Finally figured this out...
Go to query and hit edit for your configured query. Then go to the filters tab. Add a query filter like this:
urlExact:"http://myurltoexclude*"
Check the "negative" box. Click add.
Now make sure to click "save in the tiny little button on the right hand side. This is the part I missed. The URLS are still in the DB and crawl, but at least they aren't returned in results.
I am using kibana 3 to display my nginx logs which include the request_time, I would like a graph to display the average request times over the last x seconds in kibana but am not sure how todo this. Is this easily done or do I need to push it out to graphite?
You're going to want to find the histogram settings panel. There should be a gear icon labelled "configure" or some such. Once there, find the panel's "mode" setting:
Pick "mean" mode, then select the field you'd like to show. Note you must select a field, and that field must be numeric, or the histogram will throw an error.
You can try it at the live demo, pretty quick. bytes is a good field to use.
I am appending 20 images in form by using loop.when i am scrolling these images up and down i want selected image index so that i can view bigger size of selected image.
i used this form.append(image)
is there any method or way to get selected item index in form like in list there is getSelectedIndex.
plz help me and provide me gud solution ..
The APIs for javax.microedition.lcdui.Form don't provide a means to get the selected item index, most likely because it wasn't designed for that kind of use. For the use case as described in your question, the correct approach would be to use javax.microedition.lcdui.List. In addition to determining the selected item, List also provides other useful APIs such as setting a select screen command for the items in the list.
I would like to add a field to a list with displays an Image, but acts as a hyperlink. In other words like the "Hyperlink or Picture" column, but "Hyperlink AND Picture" instead.
Where the two fields you input would be the URL to the image to display, and the URL of the hyperlink.
This must be possible. I notice that the Type (in a document library) column does just that, and also includes the views that are currently being used (in the case of a folder).
Is it possible to duplicate the computed Type field in a document library to read two other fields in the list (which will act as the image url, and the redirect link)? What would the CAML be?
Thanks in advance if anyone could offer any insight.
Arnhem
This can be done but you would need to develop a custom field type. As you have found, SharePoint's default rendering for pictures is without the hyperlink. You need to change how the rendering behaves in Display mode in your own custom field. Check Patterns in Custom Field Rendering for more info.
There are also several examples of creating custom field types on the web. The MSDN articles give a lot of detail about how it all works but don't let that put you off as it's not too tricky.