I insert the value of TextBox1 (on a UserForm) into the first empty cell at the bottom of Column A on Sheet("Info").
I am trying to modify this code so that the value in TextBox2 goes into cell in Column B next to the cell where TextBox1 was added.
I cannot use the same formula, because all the cells in Column A will have values, while corresponding cells in Column B may be blank.
Public Function FindNextEmpty(ByVal rCell As Range) As Range
On Error GoTo ErrorHandle
With rCell
If Len(.Formula) = 0 Then
Set FindNextEmpty = rCell
ElseIf Len(.Offset(1, 0).Formula) = 0 Then
Set FindNextEmpty = .Offset(1, 0)
Else
Set FindNextEmpty = .End(xlDown).Offset(1, 0)
End If
End With
Exit Function
ErrorHandle:
MsgBox Err.Description & ", Function FindNextEmpty."
End Function
Private Sub CommandButton2_Click()
Dim rCell As Range
Set rCell = FindNextEmpty(ThisWorkbook.Sheets("Info").Range("A1"))
rCell.Value = TextBox1.Value
Set rCell = Nothing
End Sub
Adding
rCell.Offset(0, 1) = TextBox2.Value
after
rCell.Value = TextBox1.Value
got me where I needed to be.
Related
I'm using Worksheet_Change to make a value (either 1 or 0) appear in the next cell (Bx) when a value is entered in a range of cells (A1:A10).
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
If Target.Value = 1 Then
Target.Offset(0, 1).Value = 1
Else:
Target.Offset(0, 1).Value = 0
End If
End If
End Sub
The problem occurs when I try to clear the cells in column A.
When I select the cells I want to clear and press "Delete" I get "Run-time error '13' - Type mismatch" on the line "IF Target.Value = 1".
I would also like the cells in the B column to be cleared if I clear cells in the A column. E.g. if I delete cell A2:A5, B2:B5 should be cleared.
From what I understand the problem is that when selecting multiple cells it returns an array as the Target, and this is a mismatch with the Integer.
Is there a way around this problem?
Try this. You need to cater for multiple cells in some way, for the reasons you mention, and add an extra clause to your If.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range, r1 As Range
Set r = Intersect(Target, Range("A1:A10"))
If Not r Is Nothing Then
For Each r1 In r
If r1.Value = 1 Then
r1.Offset(0, 1).Value = 1
ElseIf r1.Value = vbNullString Then
r1.Offset(0, 1).Value = vbNullString
Else
r1.Offset(0, 1).Value = 0
End If
Next r1
End If
End Sub
In a first step we add the functionality that multiple cells are selected and changed:
Private Sub Worksheet_Change_Var1(ByVal Target As Range)
Dim targetCell As Range
'If Target.Range.count
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
If Target.Cells.Count > 1 Then
For Each targetCell In Target
If targetCell.Value = 1 Then
targetCell.Offset(0, 1).Value = 1
Else
targetCell.Offset(0, 1).Value = 0
End If
Next targetCell
Else
If Target.Value = 1 Then
Target.Offset(0, 1).Value = 1
Else
Target.Offset(0, 1).Value = 0
End If
End If
End If
End Sub
In the 2nd step we understand that also the "one cell" case can be handled in the same way and we add an if clause for the "cell(s) cleared" case:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim targetCell As Range
'If Target.Range.count
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
For Each targetCell In Target
If targetCell.Value = 1 Then
targetCell.Offset(0, 1).Value = 1
Else
targetCell.Offset(0, 1).Value = 0
End If
'if cell in col A is empty, then clear cell in col B
If targetCell.Value = "" Then targetCell.Offset(0, 1).ClearContents
Next targetCell
End If
End Sub
I've defined a couple of ranges but have problems to define a new range with a few conditions. I'm trying to set a new range from target cell downwards until the length of first TRUE cell is larger than 3 characters. The new desired range would be "Range("C" & Target.Row & ":" & Range("C65536").End(xlDown).Address(0, 0))" but only for the for the cells that have 3 or less characters. The problem with that code is that it stops at the first non-empty cell. The final cell in the range would be the last cell with max 3 characters (and not empty) before a cell value has more than 3 characters.
For instance the new range would be C35:C47 which would then be applied for the adjacent cells as B35:B47. Later on in my code I would then use this new range (B35:B47) in a "for loop" to define new values for these adjacent cells.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
Dim rng As Range, cell As Range
Set rng = Range("B" & Target.Row & ":" & Range("B65536").End(xlUp).Address(0, 0))
Set r = Target
If Target.Column = 3 And Selection.Column = 3 Then
If Intersect(Range("C:C"), r) Is Nothing Then Exit Sub
If r.Value = "" Then Exit Sub
If r.Offset(0, 1).Value <> "" Then Exit Sub
If r.Offset(0, -1).Value <> "" Then Exit Sub
Application.EnableEvents = False
r.Offset(0, -1) = Application.WorksheetFunction.Max(Range("Sheet1!B7:B" & r.Row))
For Each cell In rng
If IsNumeric(cell.Value) Then
If cell.Value <> "" Then
cell.Value = cell.Value + 1
End If
Else
MsgBox "Cell " & cell.Address(0, 0) & " does not have a number"
Exit Sub
End If
Next
Application.EnableEvents = True
End If
End Sub
The new range would then be used in a similar way as the "for-loop" in the example with the difference that "rng" would be the new range --> "For Each cell in rng2"...
I am having a problem of an infinite loop which is caused by the code below.
It is caused by changes in column E affecting changes in G and vice-versa constantly triggering Worksheet_Change(ByVal Target As Range)
In the below code I could stop this with a line that tests if the last change was made by the user or by VBA. Is there a way to test this condition?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("E:E")) Is Nothing Then Macro
If Not Intersect(Target, Range("G:G")) Is Nothing Then Macro2
End Sub
Private Sub Macro()
Dim rng As Range
Dim i As Long
Set rng = Range("E1:E10")
For Each cell In rng
If cell.Value <> "" Then
If IsNumeric(cell.Value) Then
cell.Offset(0, 2).Value = cell.Value + cell.Offset(0, 1)
End If
Else
cell.Offset(0, 2).Value = 1
End If
Next
End Sub
Private Sub Macro2()
Dim rng As Range
Dim i As Long
Set rng = Range("G1:G10")
For Each cell In rng
If cell.Value <> "" Then
If IsNumeric(cell.Value) Then
cell.Offset(0, -2).Value = cell.Value - cell.Offset(0, -1)
End If
Else
cell.Offset(0, -2).Value = 1
End If
Next
End Sub
temporarily disable events triggering:
Private Sub Macro()
Dim rng As Range
Dim i As Long
Set rng = Range("E1:E10")
On Error GoTo HandleExit ' assure proper handling of any error
Application.EnableEvents = False 'disable events triggering
For Each cell In rng
If cell.Value <> "" Then
If IsNumeric(cell.Value) Then
cell.Offset(0, 2).Value = cell.Value + cell.Offset(0, 1)
End If
Else
cell.Offset(0, 2).Value = 1
End If
Next
HandleExit:
Application.EnableEvents = True 'enable back events triggering
End Sub
the same with Macro2
EDIT to add a possible refactoring of the code
BTW, your Sub Macro() could be rewritten with no loops and without relying on IsNumeric() function (which is not 100% reliable (e.g. IsNumeric("12.5.3") would return True)
Private Sub Macro()
On Error GoTo HandleExit ' assure proper handling of any error
Application.EnableEvents = False 'disable events triggering
With Range("E1:E10") 'reference your range
If WorksheetFunction.Count(.Cells) > 0 Then ' if any "truly" numeric values in referenced range
With .SpecialCells(xlCellTypeConstants, xlNumbers).Offset(, 2) ' reference referenced range cells with constant numeric content only
.FormulaR1C1 = "=sum(RC[-1]:RC[-2])" ' write needed formula
.Value = .Value ' get rid of the formula
End With
End If
If WorksheetFunction.CountBlank(.Cells) Then .SpecialCells(xlCellTypeBlanks).Offset(, 2).Value = 1 ' if any blank cell in referenced range then fill it with 1"
End With
HandleExit:
Application.EnableEvents = True 'enable back events triggering
End Sub
I have this code:
Sub yeartest()
Dim cell As Range
storeval = 0
For Each cell In Range("I7:I17")
If cell.Value = "THISVALUE" Then
Let storeval = cell.Offset(-1, 0).Value
End If
Range("Q18").Activate
ActiveCell.Formula = "=SUM(storeval)"
Next cell
End Sub
What the code should do is analyze the range I7:I17. Everytime it encounters a cell in this range with the value THISVALUE it should go right by one cell and store that value. After the entire range has been analyzed the sum of all cells one right of THISVALUE should be output in cell Q18.
Currently cell Q18 just displays a #NONAME value when I execute the macro.
Sub yeartest()
Dim cll As Range
storeval = 0
For Each cll In Range("I7:I17")
If cell.Value = "THISVALUE" Then
storeval = storeval + cell.Offset(-1, 0).Value
End If
Next cll
Range("Q18")=storeval
End Sub
i have the following code which would auto-fill the date in column B once i add value's in column A.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim A As Range, B As Range, Inte As Range, r As Range
Set A = Range("A:A")
Set Inte = Intersect(A, Target)
If Inte Is Nothing Then Exit Sub
Application.EnableEvents = False
For Each r In Inte
If r.Offset(0, 1).Value = "" Then
r.Offset(0, 1).Value = Date & " " & Time = "hh:mm:ss AM/PM"
End If
Next r
Application.EnableEvents = True
End Sub
what im looking for is to also add the current time to column C.
ok so i found what im looking for but it requires little modification where the date and time are being set.
below is the code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim A As Range, B As Range, Inte As Range, r As Range
Set A = Range("D:D")
Set Inte = Intersect(A, Target)
If Inte Is Nothing Then Exit Sub
Application.EnableEvents = False
For Each r In Inte
If r.Value > 0 Then
r.Offset(0, -3).Value = Date
r.Offset(0, -3).NumberFormat = "dd-mm-yyyy"
r.Offset(0, -2).Value = Time
r.Offset(0, -2).NumberFormat = "hh:mm:ss AM/PM"
Else
r.Offset(0, -3).Value = ""
r.Offset(0, -2).Value = ""
End If
Next r
Application.EnableEvents = True
End Sub
to auto-fill column E with date, instead of column A
and auto-fill column F with time, instead of column B
and if possible im trying to have the same process but another cell on the same sheet.
While you might look at using SpecialCells to do this in one hit rather than a loop, a simple mod to your code would be:
one-shot per range area method
Private Sub Worksheet_Change(ByVal Target As Range)
Dim A As Range, B As Range, Inte As Range, r As Range
Set A = Range("A:A")
Set Inte = Intersect(A, Target)
If Inte Is Nothing Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
For Each r In Inte.Areas
r.Offset(0, 1).Cells.SpecialCells(xlCellTypeBlanks) = Date
r.Offset(0, 2).Cells.SpecialCells(xlCellTypeBlanks) = Time
Next r
Application.EnableEvents = True
End Sub
initial answer
Private Sub Worksheet_Change(ByVal Target As Range)
Dim A As Range, B As Range, Inte As Range, r As Range
Set A = Range("A:A")
Set Inte = Intersect(A, Target)
If Inte Is Nothing Then Exit Sub
Application.EnableEvents = False
For Each r In Inte
If r.Offset(0, 1).Value = vbNullString Then r.Offset(0, 1).Value = Date
If r.Offset(0, 2).Value = vbNullString Then r.Offset(0, 2).Value = Time
Next r
Application.EnableEvents = True
End Sub
if you want to:
put current Date in Target adjacent column blank cells
put current Time in Target adjacent column blank cells adjacent cells
then go like follows:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Range("A:A"), Target).Address <> Target.Address Then Exit Sub '<--| exit if all target cells aren't in column "A"
Application.EnableEvents = False
If WorksheetFunction.CountBlank(Target.Offset(, 1)) = 0 Then Exit Sub '<--| exit if no blank cells in target adjacent column
With Target.Offset(, 1).SpecialCells(xlCellTypeBlanks) '<--| reference blank cells in target adjacent column
.Value = Date '<--| set referenced cells value to the current date
.Offset(, 1).Value = Time '<--| set referenced cells adjacent ones value to the current time
End With
Application.EnableEvents = True
End Sub
While if you want to:
put current Date in Target adjacent column blank cells
put current Time in Target two columns offset blank cells
then go like follows:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Range("A:A"), Target).Address <> Target.Address Then Exit Sub '<--| exit if all target cells aren't in column "A"
Application.EnableEvents = False
On Error Resume Next
Target.Offset(, 1).SpecialCells(xlCellTypeBlanks).Value = Date '<--| set target adjacent column blank cells to the current date
Target.Offset(, 2).SpecialCells(xlCellTypeBlanks).Value = Time '<--| set target two columns offset blank cells to the current time
Application.EnableEvents = True
End Sub
where the On Error Resume Next is there to avoid two distinct If WorksheetFunction.CountBlank(someRange) Then someRange.SpecialCells(xlCellTypeBlanks).Value = someValue statements
Normally you would avoid On Error Resume Next statement and ensure you're handling any possible errors.
But in this case, being it confined to the last two statements of a sub, I think it's a good trade off in favour of code readability without actually loosing its control