cucumber.runtime.java.ObjectFactoryLoader loadSingleObjectFactory
WARNING: Use deprecated reflections to load ObjectFactory.
0 Scenarios
0 Steps
0m0.108s
Related
I want to reset SRK.
It can also be seen as a Factory Reset of the TPM.
I tried tpm2_clear but it doesn't work.
Machine: VMWare Workstation
# tpm2_getcap properties-variable
TPM2_PT_PERSISTENT:
ownerAuthSet: 0
endorsementAuthSet: 0
lockoutAuthSet: 1
reserved1: 0
disableClear: 0
inLockout: 0
tpmGeneratedEPS: 1
reserved2: 0
TPM2_PT_STARTUP_CLEAR:
phEnable: 0
shEnable: 1
ehEnable: 1
phEnableNV: 1
reserved1: 0
orderly: 0
# tpm2_clear -c p
WARNING:esys:src/tss2-esys/api/Esys_Clear.c:282:Esys_Clear_Finish() Received TPM Error
ERROR:esys:src/tss2-esys/api/Esys_Clear.c:97:Esys_Clear() Esys Finish ErrorCode (0x00000185)
ERROR: Esys_Clear(0x185) - tpm:handle(1):hierarchy is not enabled or is not correct for the use
ERROR: Unable to run tpm2_clear
In VMWare, phEnable is not set even after Cold-Start.
Machine: HP EliteBook 850 G5
~# tpm2_getcap properties-variable
TPM2_PT_PERSISTENT:
ownerAuthSet: 0
endorsementAuthSet: 0
lockoutAuthSet: 1
reserved1: 0
disableClear: 0
inLockout: 0
tpmGeneratedEPS: 0
reserved2: 0
TPM2_PT_STARTUP_CLEAR:
phEnable: 1
shEnable: 0
ehEnable: 1
phEnableNV: 1
reserved1: 0
orderly: 1
# tpm2_clear -c p
WARNING:esys:src/tss2-esys/api/Esys_Clear.c:282:Esys_Clear_Finish() Received TPM Error
ERROR:esys:src/tss2-esys/api/Esys_Clear.c:97:Esys_Clear() Esys Finish ErrorCode (0x000009a2)
ERROR: Esys_Clear(0x9A2) - tpm:session(1):authorization failure without DA implications
ERROR: Unable to run tpm2_clear
# tpm2_clear -c o
ERROR: Unexpected handle - TPM2_RH_OWNER
ERROR: Unknown or unsupported handle, got: "o"
ERROR: Cannot make sense of object context "o"
ERROR: Invalid lockout authorization
ERROR: Unable to run tpm2_clear
Is there any way SRK reset?
You're on the right track, tpm2_clear clears the owner hierarchy, that is the SRK and all its child keys.
According to the command specification (sec. 24.6) there are multiple reasons why tpm2_clear could fail.
1. The platform hierarchy is disabled
This error is quite subtle because it is not mentioned explicitly in the command description for TPM2_Clear. By default, TPM2_Clear operates on the platform hierarchy. However, the platform hierarchy can be disabled (phEnable bit clear) via the command TPM2_HierarchyControl:
tpm2_hierarchycontrol -C p phEnable clear
Any future use of the platform hierarchy should result in the return code TPM2_RC_HANDLE = 0x0000010B. However, there is no TPM command to re-enable the platform hierarchy. Architecture specification (Sec 13.3):
When phEnable is CLEAR, a _TPM_Init is required to SET it.
It seems you need to reset your TPM (toggling the hardware reset signal or power off) to re-enable the platform hierarchy.
If this does not solve your problem, see the next potential issue.
2. TPM2_Clear Command is disabled
This is probably not your problem, because it would yield another error (return code TPM_RC_DISABLED = 0x0000120).
The TPM2_Clear command can be disabled (disableClear bit set). This is done via the command TPM2_ClearControl. To enable clearing, call tpm2_clearcontrol -Cp c. Like tpm2_clear, tpm2_clearcontrol requires platform authorization.
I have a cucumber test suite which has some tests
I run the tests using command
sbt "testOnly <cucumber_class_name>"
And one of the cucumber tests fail an assertion and console shows
Failed scenarios:
classpath:features/my_cucumber_scenario.feature:31# <my test description>
19 Scenarios (1 failed, 18 passed)
88 Steps (1 failed, 87 passed)sts 214s
3m18.224s
But in the end the console shows
Total 80, Failed 0, Errors 0, Passed 80
Since one of the tests failed, in the final output it should have shown
Failed 1 (Or something like that). But it is showing all passed instead due to which my build on travis is not failing.
How to solve this problem ? Is there a solution in cucumber ?
My dependencies are
"io.cucumber" % "cucumber-core" % "5.7.0",
"io.cucumber" % "cucumber-junit" % "5.7.0"
"io.cucumber" %% "cucumber-scala" % "5.7.0"
This problem is solved by cucumber team in
https://github.com/cucumber/cucumber-jvm-scala/releases/tag/v6.2.2
I am getting following error whenver I try to update my studio project from Nuxeo Platform. Earlier I was getting a transaction timeout error and I increased the nuxeo.db.transactiontimeout to 900. But now I see this error as below.
Also, when I stop and start the nuxeo server, in the summary tab I see that one the application fails to start. There is also an error An error was detected during startup = Component Loading Status: Pending: 0 / Missing: 0 / Unstarted: 1 / Total : 770
I get an error while building an image using Yocto (dizzy):
ERROR: Creation of tar /mnt/workspace/build/tmp/deploy/tar/xev-dbg-1.2.1-r0.tar.gz failed.
and bitbake command fails with the following report:
No currently running tasks (6291 of 6292)
NOTE: Tasks Summary: Attempted 6292 tasks of which 18 didn't need to be rerun and all succeeded.
Summary: There were 13 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
If I check the file xev-dbg-1.2.1-r0.tar.gz, I get:
$ file /mnt/workspace/build/tmp/deploy/tar/xev-dbg-1.2.1-r0.tar.gz
/mnt/workspace/build/tmp/deploy/tar/xev-dbg-1.2.1-r0.tar.gz: gzip compressed data, from Unix, last modified: Mon Mar 27 20:19:55 201
and it is the same case for the remaining two errors.
I am confused:
if there was an error, why bitbake is reporting that all tasks succeeded?
If the file were successfully created, why bitbake exits with non zero value?
Bitbake did not return a 0 exit-code. This mean that there are errors in the bitbake process.
There are 3 errors when it is trying to create the tar files as shown.
The compressed file is there but it is not complete. E.g. Just like how you could download a file and interrupt it and the download file is still there. So we usually use md5sum or some kind of hash number to check on the completeness of the file.
A better understanding might be: Bitbake attempted to run 6292 task. 18 of them do not need to rerun. Bitbake attempted to rerun the rest 6274(6292-18) and succeeded in rerunning them. This does not mean that all of them are successfully compiled. In the process of rerunning them, there are 13 warnings and and 3 errors appeared. Because of the 3 errors, bitbake returns with a non-zero exit code.
No currently running tasks (6291 of 6292)
NOTE: Tasks Summary: Attempted 6292 tasks of which 18 didn't need to be rerun and all succeeded.
Summary: There were 13 WARNING messages shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
I am trying to execute a systemtap script. But during execution i got the following semantic error.
stap -v -g netfilter.stp
Pass 1: parsed user script and 96 library script(s) using 150164virt/25896res/2100shr/24504data kb, in 230usr/20sys/243real ms.
WARNING: Eliding unused function '__get_mac_addr': identifier '__get_mac_addr' at netfilter.stp:26:10
source: function __get_mac_addr:string(addr:long) {
^
WARNING: Eliding unused function '__get_skb_arphdr': identifier '__get_skb_arphdr' at :37:10
source: function __get_skb_arphdr:long(addr:long)
^
WARNING: Eliding unused function '__ip6_skb_proto': identifier '__ip6_skb_proto' at :43:10
source: function __ip6_skb_proto:long(addr:long)
^
**semantic error: no probes found**
Pass 2: analyzed script: 0 probe(s), 0 function(s), 2 embed(s), 0 global(s) using 352168virt/98268res/3352shr/95492data kb, in 950usr/250sys/2047real ms.
Pass 2: analysis failed. [man error::pass2]
Help me on this
It seems as though you're trying to run a tapset .stp file (which is a library of reusable parts, like libc), instead of a script that actually contains probes & work to do. See the netfilter_drop.stp and netfilter_summary.stp files for some sample usage.