I'm moving from vim to neovim, and my problem is that I need to carry it on portable USB sticks.
So I need to read config files from relative path. I used $VIM/_vimrc for this purpose on original vim, since $VIM always points to vim files in my USB.
But Neovim stores config files in ~/.config on Linux or Appdata on Windows, which both points to local computer's directory I was using.
Is their any relative directory Neovim uses to read config files? I don't want to manually source config file every single time...
From :help startup:
The Nvim config file is named "init.vim", located at:
Unix ~/.config/nvim/init.vim
Windows ~/AppData/Local/nvim/init.vim
Or if $XDG_CONFIG_HOME is defined:
$XDG_CONFIG_HOME/nvim/init.vim
So you can use $XDG_CONFIG_HOME in a way similar to how you used $VIM before.
Instead of setting $XDG_CONFIG_HOME, you can make a bash alias, or an equivalent wrapper script:
alias vim="vim -u /path/to/vimrc"
Related
I was looking to get into learning a text editor for programming. However, I've quickly run into a little snag that I can't seem to find a solution to.
I have modified my /home/user/.nvimrc file to add some plugins and I can load it using :source ~/.nvimrc, however, it never loads automatically. :scriptnames shows a list of scripts in /usr/, but mysteriously absent from the list is the .nvimrc file in my home directory. Again, I can load it in the command line, but I'd like to not have to use :so ~/.nvimrc every time I open a file.
I am not using sudo to run vim.
How can I solve this problem? Is this something everybody has to do?
Could be this issue: https://github.com/neovim/neovim/issues/3530
Summary:
New location is ~/.config/nvim/init.vim
To keep ~/.nvimrc you can source it from the new location:
mkdir -p ~/.config/nvim
echo 'source ~/.nvimrc' > ~/.config/nvim/init.vim
Instead of referring to your rc file directly, consider using $MYVIMRC:
:e $MYVIMRC
:source $MYVIMRC
Reference: Learn Vim the Hard Way/Editing your vimrc
:help config lists the paths for each OS:
Unix ~/.config/nvim/init.vim (or init.lua)
Windows ~/AppData/Local/nvim/init.vim (or init.lua)
$XDG_CONFIG_HOME $XDG_CONFIG_HOME/nvim/init.vim (or init.lua)
When using vi I almost always need to do
:set hlsearch
:set number
How can I make my system always load these as presets or something when I use vi.
In one machine I am root, in another not. So please include an answer for both. Thank you!
just create a .vimrc file with the following entries:
set hlsearch
set number
Put this file in the $HOME directory of the user you are using on the particular machine:
/root/on the machine where you are root.
/home/USERNAMEon the machine where your user is USERNAME
if .vimrc does not exist, create it.
You can create a file named .exrc in your home directory and write all the commands (without the preceding : ) there.
When you start the vi editor, the editor searches for the environment variable $EXINIT and uses the contents of the file it points to as configuration commands, if it exists. If EXINIT is not defined, vi looks for the .exrc file in your HOME directory, and uses its configuration commands. Finally, vi looks in your current directory for a file named .exrc and executes the commands in that file, if it exists. In this manner, you can have a different vi configuration for each directory or project that you're working on.
(http://alvinalexander.com/unix/edu/un010003/)
The corresponding file for vim is called .vimrc.
I am trying to get gVim working on a windows 7 machine and am having the following problems:
Whenever I try to change the _vimrc file, I get a message saying that I don't have permission to save in this location. This is on my home pc btw.
I can't seem to change the directory where the files I edit are being saved. They are all being saved to my desktop at the moment. I tried :set dir=path to where I want to save... with no success.
I wanted to run through vimtutor; however, whenever I type vimtutor into cmd, vim flashes open for a second then closes.
How do I alter the _vimrc file and how do I set the destination for edited files?
I find many people do it differently. Here's how I organize my configurations on windows.
First note that I don't believe in mixing my vim configurations with the stock vim installation. So I don't write or modify files in %PROGRAMFILES% or %PROGRAMFILES(x86)%.
My vim configurations work on different platforms (OS X, linux, windows). And I keep them organized in a .vim folder and a .vimrc file.
Some of my windows machines have cygwin and others do not. On the ones without cygwin, I put my .vim folder and my _vimrc file in %USERPROFILE%. On the ones with cygwin, I put my .vim folder and my _vimrc file in my cygwin user's home directory.
%HOME% is not defined on windows OOTB, so I define it. I find setx.exe is easy...
Example: setx HOME %USERPROFILE% or setx HOME d:\cygwin\home\myname
Alternatively, you can add environment variables via the control panel.
Note, you can copy/store the .vim folder and _vimrc file in %HOME%. But I like to keep them in a git repo elsewhere on my machine and link to them. On windows, I use mlink /d %HOME%\.vim location_of_vim_folder to link the .vim folder. And mlink /h %HOME%\_vimrc location_of_dot_vimrc_file to link the .vimrc to _vimrc file.
Note, you should have write permissions to your %HOME% folder defined above... so this should solve your problem with permissions. (You need to be an administrator to write to %PROGRAMFILES% or %PROGRAMFILES(x86)%
In my vimrc, I have a bit of boiler plate stuff for windows:
"g:my_vim_dir is used elsewhere in my vim configurations
let g:my_vim_dir=expand("$HOME/.vim")
"$HOME/.vim and $HOME/.vim/after are in the &rtp on unix
"But on windows, they need to be added.
if has("win16") || has("win32") || has("win64")
"add g:my_vim_dir to the front of the runtimepath
execute "set rtp^=".g:my_vim_dir
"add g:my_vim_dir\after to the end of the runtimepath
execute "set rtp+=".g:my_vim_dir."\\after"
"Note, pathogen#infect() looks for the 'bundle' folder in each path
"of the &rtp, where the last dir in the '&rtp path' is not 'after'. The
"<path>\bundle\*\after folders will be added if and only if
"the corresponding <path>\after folder is in the &rtp before
"pathogen#infect() is called. So it is very important to add the above
"'after' folder.
"(This applies to vim plugins such as snipmate, tabularize, etc.. that
" are loaded by pathogen (and perhaps vundle too.))
" Not necessary, but I like to cleanup &rtp to use \ instead of /
" when on windows machines
let &rtp=substitute(&rtp,"[/]","\\","g")
"On windows, if called from cygwin or msys, the shell needs to be changed
"to cmd.exe to work with certain plugins that expect cmd.exe on windows versions
"of vim.
if &shell=~#'bash$'
set shell=$COMSPEC " sets shell to correct path for cmd.exe
endif
endif
"Then I load pathogen... (Or if you prefer, you could load vundle bundles here if you wish )
I can't seem to change the directory where the files I edit are being saved. They are all being saved to my desktop at the moment. I tried :set dir=path to where I want to save... with no success.
dir is the location for swap files, which are special backing files used by Vim at runtime.
What you want is cd or lcd which changes the current directory. Type :help cd inside of Vim for more info.
How do I alter the _vimrc file and how do I set the destination for edited files?
I have _vimrc in my Vim folder ($VIM), so when I want to put Vim on a new Windows machine I just copy my entire folder.
In Vim, is it possible to change the default location of the user vimrc file, i.e., from $HOME/.vimrc to some other location ?
Another solution might be to create a symlink to you preferred location. I have my .vimrc in $HOME/.vim/.vimrc and symlink to it. This way I can have it in a git repo and backup it.
You must start vim with the command vim -u ./path/to/your/vimrcfile
vim -u NONE is a good way to start Vim without any plugin or customisation.
See :help starting.txt for more information.
The VIMINIT variable is my preferred method. The problem with aliasing vim with the -u flag is that if vim is opened in some way other than from the shell command your configuration won't get pulled in. Setting $VIMINIT does not suffer from this drawback. Check this out for more information.
export VIMINIT='source $MYVIMRC'
export MYVIMRC='~/.vim/vimrc' #or any other location you want
Note that Vim normally sets the MYVIMRC variable, though I'm not sure exactly what it's used for. Based on my testing, using VIMINIT in this fashion will result in it not being automatically set on startup as it would normally be. This is why I'm setting it myself.
This works for neovim too!
On Windows, I have the _vimrc that's in my home directory contain one line, source c:\path\to\my.vimrc.
I have not yet worked out a good way to move the entirety of my vimfiles folder, but that's less critical as it's all stuff I've installed from elsewhere. I.e., it'd be easy to restore if I lost it. (I know that I can change runtimepath but my problem is more coming up with a "good" way to do so.)
Update
After six years I extended slightly from what I mention in the comments below; as I put stuff into 'after' and wanted to just keep rtp clean I got something that has been solid for a while now. Today in my %USERPROFILE%\_vimrc I do hardcode the actual paths to things and it changes on every machine I use (and I basically do the same thing on *nix) but this gets copied around mostly-manually when setting up a new PC. I also have a version which I can use to launch Vim on another connected machine on the network, e.g. a co-worker's machine, so I get my config and all that, but the gist is:
set runtimepath^=E:/dotfiles/vim
set runtimepath+=E:/dotfiles/vim/after
set runtimepath-=~/vimfiles
set runtimepath-=~/vimfiles/after
runtime vimrc
and then %USERPROFILE%\_gvimrc just has one line:
runtime gvimrc
(Both vimrc and gvimrc are in the /dotfiles/vim folder and also on Bitbucket.)
I see two options, depending on your needs.
Have ~/.vimrc import the other location
create an alias in your bashrc alias vim="vim -u otherlocation"
I edited
C:\Program Files\Vim\_vimrc
and changed both the runtimepath and sourced my own .vimrc.
I also use these settings in Cygwin (and have them version controlled). So it's this in practice (added at the bottom of the _vimrc file):
let &runtimepath = 'C:\cygwin\home\cygwinaccount\.vim,' . &runtimepath
source C:\cygwin\home\cygwinaccount\.vimrc
Bliss ! :)
In linux:
You can edit .bashrc or .zshrc startup script and add the following lines to change the default location of .vimrc file
export VIMINIT='source $MYVIMRC'
export MYVIMRC='~/.vim/.vimrc' # Note the . (dot) before vimrc. If that is what you have called it.
I feel like the simplest solution is to just have a single line in ~/.vimrc that loads the vimrc from the other location, i.e.:
source PATH/TO/OTHER/LOCATION/.vimrc
I just installed Cygwin on my work machine and would like to use the .vimrc file I use on my Linux box at home.
Is that possible, or does it need to have Cygwin-specific settings?
Where would I put the .vimrc file?
I'm a little unsure of what directory I'm being dropped into at the bash prompt under Cygwin, but I think I'd create a subdirectory called .vim there, right?
I launched vi as vi -V and got this:
chdir(/cygdrive/c/Users/johntron)
chdir(/etc)
chdir(/cygdrive/c/Users/johntron)
could not source "/etc/virc"
chdir(/cygdrive/c/Users/johntron)
chdir(/cygdrive/c/Users/johntron)
chdir(/cygdrive/c/Users/johntron)
could not source "$HOME/.virc"
chdir(/cygdrive/c/Users/johntron)
chdir(/cygdrive/c/Users/johntron)
chdir(/cygdrive/c/Users/johntron)
could not source "$HOME/.exrc"
Realizing vi was looking for .virc and not .vimrc like all the other *nix systems I've ever used, I just ran this to fix the problem:
cp ~/.vimrc ~/.virc
... or if if you've configured symlinks:
ln -s ~/.vimrc ~/.virc
I'm pretty sure this was a problem, because Cygwin installs vi, and not vi improved; however, the loading screen if you launch vi with no parameters still says vi improved. Regardless, I installed vim via setup.exe and running vim (not vi) does indeed try to load ~/.vimrc as expected. You can simply add an alias vi=vim to your ~/.profile to use the improved version by default.
Cygwin (as of version 1.7.25) installs vi (not vim!) by default. If you also install vim you will have two commands: /usr/bin/vi and /usr/bin/vim.
Unlike in other *nix (e.g. debian) both commands slightly differ in their behaviour on starting vi/vim.
Both commands will load Vi Enhanced but they differ in the files they look for to initialize the editor:
/usr/bin/vi looks first for /etc/virc and then for $HOME/.virc
/usr/bin/vim looks first for /etc/vimrc and then for $HOME/.vimrc.
Both files (in /etc and in $HOME) will be sourced if found!
You can check it yourself entering vi -V and vim -V.
Use .vimrc if you call vim and .virc if you call vi. Or simply alias vi=vim for using .vimrc
1) Yes it is possible. It doesnt need any cygwin specific settings, though you can add some windows specific ones. Just make sure to install vi (vim gvim equivalent) properly.
2) the same place as on *nix -- user home directory
Beware one thing: there is a Cygwin port of vim, and a native win32 port of vim. Both have their advantages and their flaws when dialogue with cygwin or native-win32 applications is concerned.
A category on vim.wikia is dedicated to cygwin related tips.
Some parts of file system of Cygwin use your "host" file system as its own. Within cygwin, there is a user home directory (which actually resides under your "Documents and Settings/Username" folder), so you should place it there.
Just place your .vimrc somewhere you know how to access via cygwin and do a
directory/you/know$ cp .vimrc ~/
It will work--at least worked with default vim on my Cygwin installation several months ago.
I don't see any reason why your Linux ~/.vimrc
should not work in your cygwin install.
To go to your home directory in cygwin,
cd ~
or
cd $HOME
In Windows, you can use WinSCP to connect to your Linux box, open your Linux .vimrc in the WinSCP default editor, copy the contents. Then switch to the Cgywin terminal and type
getclip > ~/.vimrc
Start vi/vim to see if your new settings have taken effect:
vi
I had to rename / symlink my .vimrc file to .virc in a directory like /home/Leo/.virc or more generally $HOME/.virc.
I just created my own and worked out of box:
1) vim ~/.vimrc
Once inside the .vimrc (blank file) I like to copy the example from:
2) :r $VIMRUNTIME/vimrc_example.vim
3) :wq
Then check any file should have lots of color and stuff
4) vim .vimrc (or whatever file, e.g. ~/.bashrc)
simply navigate to your home directory which is
c:/Users/user_name/
create the file using
vi .vimrc
set your preferences here, and they would surely reflect
like
set nu "show line numbers
set ai "auto indentations
colors blue " or elflord or whatever you like.
save and try.
I had issue with Cygwin vi tabstop. It was always defaulting to 8. While launching it was giving error "Failed to source defaults.vim" Tried to follow various solutions but below worked for me.
Create .vim directory under current user home ($HOME) directory.
Create .virc file under .vim directory.
Add below line to .virc
set tabstop=4
Cygwin version details
CYGWIN_NT-10.0-22000 3.3.5-341.x86_64 x86_64 Cygwin