I have an issue where Azure Data Factory Integration runtimes will not start.
When I trigger the pipeline I get the following error in Monitor -> Pipeline runs "InternalServerError executing request"
Image 1
In "view activity run" I can see that it's the Data Flow that failed with the error
{
"errorCode": "1006",
"message": "Hit unexpected exception and execution failed.",
"failureType": "SystemError",
"target": "data_wrangling_ks",
"details": []
}
Image 2
(the two successful runs are from a Self-Hosted IR)
When i try to start "Data flow debug" it will just disappear without any information.
This issue started earlier today without any changes in Data Factory config or the pipeline.
Please help and thank you for your time.
SOLVED:
I changed the Compute type from General Purpose to Compute Optimized and that solved the problem.
By looking at the error message, it seems like this issue has occurred due ADF related service outage in West Europe region. The issue has been resolved by the product team. Please open a MSDN thread if you ever encounter this issue.
Ref: Azure Data Factory Pipeline failed while running data flows with error message : Hit unexpected exception and execution failed
Related
I received the below error on Synapse pipeline. I am running pipeline with more cluster size with memory optimized clusters. I am just processing 7-8 JSON files of around 90MB of size each.
Error
{ "errorCode": "145", "message": "Internal Server Error in Synapse
batch operation: '[plugins.C4T-PRIV-SAW-CAS.IR-Test.19
WorkspaceType: CCID:]
[Monitoring] Livy Endpoint=[
https://hubservice1.westeurope.azuresynapse.net:8001/api/v1.0/publish/c1e53348-b457-4afd-a61d-76553bdd369c
]. Livy Id=[4] Job failed during run time with state=[dead].'.",
"failureType": "SystemError", "target": "DF_Load_CustomsShipment",
"details": [] }
The internal server errors are mostly noticed when there is an intermittent/transient issue with the dependent service.
If the issue is not auto resolved or you still experience the issue consistently, I would recommend raising a support ticket for the support engineer to investigate.
I am deploying a Service Fabric application and encountered this error for a resource of type Microsoft.ServiceFabric/clusters/applicationTypes/versions:
Status: Failed
Error:
Code: ClusterChildResourceOperationFailed
Message: Resource operation failed. Operation: CreateOrUpdate. Error details: {
"Details": "FABRIC_E_IMAGEBUILDER_VALIDATION_ERROR: DOWNLOAD PATH SANITIZED"
}
Has anyone run into this issue before? If so, what was the root cause of the error?
When I encountered this error, my application type name in my manifest did not match the application type name that I was deploying to.
It is possible to view far more useful/relevant error messages under these scenarios by going to the Service Fabric Explorer.
e.g.
https://{my-service-fabric-clustername.example.com}:19080/Explorer/old.html#
NOTE: The "new" UI does not show these useful error details, you need to select the "View old SFX" interface option
Then clicking on the "Type" that I was uploading the application to, revelaed far more descriptive and helpful errors:
From my experience, this is an issue with the version number of the sfpkg not aligning with the version in the template's Microsoft.ServiceFabric/clusters/applicationTypes/versions. Try looking into the application package's ApplicationManifest.xml file for ApplicationTypeVersion for the right version.
An error has started popping up in my Azure Data Factory Pipeline. I have a few Azure Function steps in the pipeline, but for some reason, one of the Azure Function steps has started returning an error. In Azure Data Factory, the error is a 3608 code after running for 1 minute 40 seconds:
Failure type: User configuration issue
Details: Call to provided Azure function 'CollateSheetsHTTPTrigger' failed with status-'InternalServerError' and message - 'Invoking Azure function failed with HttpStatusCode - InternalServerError.'.
However, in a prior run sub-pipeline, this Azure Function ran successfully on the same data (parameters and worksheet are on the only difference). The subsequent 3 runs of pipelines fail immediately (after 2 seconds) at the first Azure Function (a different AZ function now) step in each, with the same 3608 error code but different details:
Call to provided Azure function '???????????????' failed with status-'NotFound'
and message - '<html> <head><title>404 Not Found</title></head> <body
bgcolor="white"> <center><h1>404 Not Found</h1></center> <hr><center>nginx</center>
</body> </html> '.
Now it gets even stranger. After these 3 failed pipelines, the next pipeline which is pretty much the same as the previous 4 except for a few parameters, runs successfully, even though it has the same 2 AZ functions that failed before. And then the next 2 pretty similar pipelines also run successfully.
I then went and looked at the monitoring page for the 2 Azure Functions:
The first AZ function that failed, had 2 errors even though it only failed once in AZ Data Factory... the timing is slightly different for the 2 errors but they could only come from the first failed pipeline, so why does it say there are 2 errors? Then if you look at the actual error, all it says is "The operation timed out". The function was not running for more than 150 seconds so this is strange. Additionally, I have a bunch of error catching code and nothing comes up there.
The other failed AZ function steps from the other function do not show up on the monitoring page, it seems as if the first error crashed the AZ function app and then it eventually restarted?
I'm sorry I can't help but I did have a similar problem with an Azure function that executes a SOAP-call to a webservice every minute. Since 4 days this also fails with a timeout. If I run the function within my debugger it runs without problems. But the Azure Function fails every time, after 20 sec.
I'll follow this question and hope someone else can help...
An Azure Support Engineer identified the issue, it was due to a change to the azure-function-host library. The relevant issue is here https://protect-eu.mimecast.com/s/-CT5C3QxrTmREBwhgPxLm?domain=github.com and was fixed last week
I have created 2 pipeline in Azure Datafactory. We have a custom activity created to run a python script inside the pipeline.When the pipeline is executed manually it successfully run for n number of time.But i have created a scheduled trigger of an interval of 15 minutes in order to run the 2 pipelines.The first execution successfully runs but in the next interval i am getting the error "Operation on target PyScript failed: Hit unexpected exception and execution failed." we are blocked wiht this.any input on this would be really helpful.
from ADF troubleshooting guide, it states...
Custom Activity :
The following table applies to Azure Batch.
Error code: 2500
Message: Hit unexpected exception and execution failed.
Cause: Can't launch command, or the program returned an error code.
Recommendation: Ensure that the executable file exists. If the program started, make sure stdout.txt and stderr.txt were uploaded to the storage account. It's a good practice to emit copious logs in your code for debugging.
Related helpful doc: Tutorial: Run Python scripts through Azure Data Factory using Azure Batch
Hope this helps.
If you are still blocked, please share failed pipeline run ID & failed activity run ID, for further analysis.
When I recreate my VM I got the following error:
Problem occurred during request to Azure services. Cloud provider details: Unable to edit or replace deployment 'VM-Name': previous deployment from '8/20/2019 6:20:33 AM' is still active (expiration time is '8/27/2019 5:17:41 AM'). Please see https://aka.ms/arm-deploy for usage details.
Help me please to understand.
What could be the cause of the error ?
UPDATED:
This deployment has not been started previously.
Prior to this, errors were received during creation:
Azure is not available now. Please Try again later
There were several such errors one at a time and then I got that error related to:
Unable to edit or replace deployment
My assumptions about this.
Tell me, am I right or not ?
I launched the image, then after some time I recreated it.
Creation began, but at that moment the connection with Azure was lost.
Then, when the connection was restored, we tried to make a deployment that was not removed in the previous attempt (because there was no connection with Azure).
As a result, we got such an error.
Does this theory make sense?
exactly what it says, there is another deployment with the same name going on at this time, either change the name of the deployment you are trying to queue or wait for the other deployment to finish\fail
This can also occur if you use Bicep templates for your ARM deployement and multiple modules or resources in the template have the same name:
module fooModule '../modules/foo.bicep' = {
name: 'foo'
}
module barModule '../modules/bar.bicep' = {
name: 'foo'
}
I got the same error initially pipeline was working but when retriggered pipeline took more time so i canceled the deployment and made a fresh rerun it encounters. i think i need wait until that deployment filed.