Today suddenly i receive this issue - sometimes i cant conect to any network, some time i cant conect to WPA2 networks, by can conect to unsecure network, some times i conect to everithing. Before 3 weeks i haven any problem.
In logs by journalctl -f | grep -i warn i see:
янв 12 14:16:08 egor-pc NetworkManager[572]: <warn> [1578831368.2657] device (wlp0s20f3): Deactivation failed: GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not connected
янв 12 14:16:08 egor-pc NetworkManager[572]: <warn> [1578831368.2662] sup-iface[0x55cd805be930,wlp0s20f3]: assoc[0x55cd80652b80]: abort due to disconnect: Request cancelled
янв 12 14:16:12 egor-pc NetworkManager[572]: <warn> [1578831372.0231] sup-iface[0x55cd805be930,wlp0s20f3]: connection disconnected (reason -3)
янв 12 14:17:18 egor-pc com.deepin.daemon.Accounts[683]: <warning> network.go:304: No such interface “org.freedesktop.DBus.Properties” on object at path /org/freedesktop/NetworkManager/Devices/4
If need, i can send more logs, or check something else. I try use sudo sh -c 'modprobe -r iwlwifi && modepobe iwlwifi 11n_disable=1' from UBUNTU forum but it now helps.
OS: Arch Linux x86_64
Kernel: 5.4.8-arch1-1
This thing helps me https://linuxconfig.org/unmanaged-network-solution-on-debian-linux
Maybe ilt helps to somebody else
Related
I upgraded my Linux kernel and dovecot failed to start with the following error messages:
Error: service(managesieve-login): listen(*, 4190) failed: Address already in use
Error: service(pop3-login): listen(*, 110) failed: Address already in use
Error: service(pop3-login): listen(*, 995) failed: Address already in use
Error: service(imap-login): listen(*, 143) failed: Address already in use
Error: service(imap-login): listen(*, 993) failed: Address already in use
Fatal: Failed to start listeners
Strangely enough, I couldn't find any process bounded to those port numbers. All commands below return nothing.
# netstat -tulpn | grep 110
# ss -tulpn |grep 110
# fuser 110/tcp
# lsof -i :110
I also tried to change the listen setting to my specific IP address and it still failed the same way.
Any idea how I can solve this problem? Here's my version info:
# uname -a
Linux ip-172-31-26-222 4.14.177-107.254.amzn1.x86_64 #1 SMP Thu May 7 18:30:14 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# dovecot --version
2.2.36 (1f10bfa63)
Hi it looks like you are using AWS as I am. I recently updated via Yum as well. I noticed that a new package named 'portreserve' was also installed. I killed that process, left the /etc/dovecot/dovecot.conf as it was before and then started Dovecot successfully. I was also immediately able to reconnect my mail clients connection. I hope that helps you.
I also restarted the portreserve program since it seems useful to limit port access.
I just installed CentOS 7 [Kernel 3.10.0-514] on my USB stick.
Operating system works fine but I had some problems with my Broadcom 43227 wireless card.
I downloaded driver, patched it, changed code a bit according to the instruction here: https://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom and after many attempts it finally compilled and after loading the driver module into kernel led turned on.
Now I need to connect to my Wi-Fi.
What am I trying to do:
Get wireless interface name using iw dev:
phy#0
Interface wlp2s0
Scan to find WiFi Network using iw wlp2s0 scan | grep SSID
SSID: MyNetworkName
Generate a WPA/WPA2 configuration file using wpa_passphrase MyNetworkName >> /etc/wpa_supplicant.conf
MyNetworkPassword
Connect to WPA/WPA2 WiFi network using wpa_supplicant -B -D wext -i wlp2s0 -c /etc/wpa_supplicant.conf
Successfylly initialized wpa_supplicant
[and in some cases after few minutes]
ERROR #wl_cfg80211_scan: WLC_SCAN error (-22)
Get an IP using dhclient using dhclient wlp2s0
But nohing happens
Ping command : Name or sarvice not known
If I run wpa_supplicant without -B I get some repeating errors:
Device or resource busy
wlp2s0: Failed to initiate AP scan
wlp2s0: Trying to associate with [MAC] (SSID='MyNetName' freq=2462 MHz)
Operation not supported
wlp2s0: Association request to the driver failed
....
if I add -D nl80211 to wpa_supplicant call I get same errors without "Device or resource busy"
What I am doing wrong?
I have an Rpi3 and I want to bond it with nRF which is connected to my laptop via UART. This nRF-laptop connection shows me whether Rpi3 is connected and/or paired with nRF. I am able to connect to the nRF device by running:
gatttool -t random -b XX:XX:XX:XX:XX:XX -I
I found that to be able to pair it, all I need to do is run the following command after I connected using gattool:
sec-level medium
However, nRF device only showed "Connected".
Then I tried using bluetoothctl command. I made sure the power is on, agent is on, it's discoverable and etc. After I ran the command pair XX:XX:XX:XX:XX:XX, it said it was successful. This was also confirmed after running info XX:XX:XX:XX:XX:XX. Yet nRF device did not react to the pairing. If I connect to nRF device through my phone using "nRF Connect" app, then nRF shows that my phone is paired.
I am running:
Linux 4.9.13-v7+ #974 SMP Wed Mar 1 20:09:48 GMT 2017 armv7l GNU/Linux
PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
NAME="Raspbian GNU/Linux"
VERSION_ID="8"
VERSION="8 (jessie)"
Bluez-5.44
I followed tutorials from adafruit and stackoverflow. I read that for Bluez-5.44 I do not need to run bluetooth in the experimental mode.
What am I missing? I would appreciate any help.
To any lost souls who might have also been stuck in this situation, here is how I solved it (you need to run sudo for the following commands):
$ service bluetooth stop
$ /etc/init.d/bluetooth start
If the nRF device has been paired once and then restarted, that means the pairing key is still on Pi's side which needs to be removed and can be done by:
$ bluetoothctl
$ remove XX:XX:XX:XX:XX:XX
$ exit
After this you need to start bluetooth device:
$ hciconfig hci0 up
I thought I had rsnapshot all setup properly, but after checking my logs the next day I found the following:
[05/Sep/2014:10:34:11] /usr/bin/rsnapshot daily: ERROR: /usr/bin/rsync returned 12 while processing john#192.168.0.102:/media/linuxstorage/docs/
What does return code "12" mean?
To see what was going on, I ran it manually and went off to do other things:
raspberrypi $ sudo rsnapshot daily
Well lo and hehold, it had been sitting there waiting for my password.
john#192.168.0.102's password:
Connection closed by 192.168.0.102
rsync: connection unexpectedly closed (0 bytes received so far) [Receiver]
rsync error: error in rsync protocol data stream (code 12) at io.c(605) [Receiver=3.0.9]
----------------------------------------------------------------------------
rsnapshot encountered an error! The program was invoked with these options:
/usr/bin/rsnapshot daily
----------------------------------------------------------------------------
ERROR: /usr/bin/rsync returned 12 while processing bgrissom#192.168.0.102:/medi/linuxstorage/docs/
I had changed the rsnapshot user from pi to root in /etc/crontab and root was not setup the "ssh without a password" keys for the remote host. All I had to do to fix this is:
raspberrypi $ sudo bash
raspberrypi # ssh-copy-id john#192.168.0.102
The fact: return code "12" means there is something wrong with authentication to remote server.
I ran into this also and seems like this is the most common problem for getting that error:
ERROR: /usr/bin/rsync returned 12 while processing .....
Problem: rsnapshot uses rsync under the hood and can't connect because you probably never actually connected to that remote server.
Solution: You have to connect to that remote server at least once manually through terminal from that machine where rsnapshot is running
with: ssh remote_user#remote_server.domain
so that you confirm the connection and then entry can be made to known_hosts!
After that rsnapshot worked for me.
I am running Ubuntu 64 bit on top of Oracle VM installed on Windows 7 Operating System.
This is the error message I am getting
stop: Rejected send message, 1 matched rules; type="method-call", sender=":1.10" (uid=1000) pid=1084 comm="stop networking"; interface="com.ubuntu.Upstart0_6.job" member="Stop" "error_name"="unset" requested_reply="0" destination="com.ubuntu.Upstart" (uid= 0 pid=1 comm="/sbin/init")
start: Rejected send message, 1 matched rules; type="method-call", sender=":1.11" (uid=1000) pid=1085 comm="stop networking"; interface="com.ubuntu.Upstart0_6.job" member="Stop" "error_name"="unset" requested_reply="0" destination="com.ubuntu.Upstart" (uid= 0 pid=1 comm="/sbin/init")
Is this because of any settings I misconfigured?
What exactly it could be?
I was trying to restart the networking service to get the eth1 interface working.
Instead of doing netwrking service restart it I just ran following command at the commandline.
$sudo ifup -v eth1
And the interface started showing up
Though this is not a solution but it worked for me. Still I dont know what was wrong above.