Is it possible to track bluetooth connections that are connected to eachother? and if yes, is it possible to see that they're sharing files/sending data with bluetooth?
It is for a personal chat program, that me and my friends are working on in C#.
The Bluetooth devices and related status can be found using APIs of Windows.Devices.Enumeration namespace that are available for C#. They shall help in getting general information about devices connected to or discoverable by the system. It shall help in finding devices internally connected to the system, externally connected, or nearby over wireless or networking protocols and get information about them. The DeviceWatcher in turn shall help in finding and receiving updates for devices (like getting notifications when devices get added, connected, disconnected, change online status, or change other properties.)
Related
I'm trying to establish a connection between my PC running Ubuntu and my iPhone via Bluetooth automatically when it becomes available, after being manually paired beforehand. I've seen this to be possible with certain peripherals, mainly audio. For example, my phone will automatically connect to a Bluetooth speaker when it is turned on and Bluetooth is active on my phone; another example is my phone automatically connects to my car's radio system via Bluetooth when I turn the car on.
I'm not able to connect my phone to my PC without first initiating the connection from the smartphone's Bluetooth menu. I'm thinking that I could possibly write an application for the PC to attempt to connect to the device every few minutes or something, but it seems that the phone needs to be the device to initiate the connection.
The only information that I need for what I'm trying to do ultimately is that the devices can pair successfully. Essentially I'm trying to build a sort of proximity trigger between my phone and my PC without using Wi-Fi and GPS - I can't use these for some specific reasons.
Is there any way to make this happen?
Yes this should be doable as long as you use the Background Processing feature for iOS apps. In the example I'll give below, we'll have the PC be the peripheral and the phone be the central, but you can really have it working either way. You will need to do the following:-
First initial connection needs to be performed in the foreground (this is due to iOS's background limitations).
On the iOS side, you need an application that acts as a central that scans and connects to the remove device (check this example as a starting point).
Upon connection, you need to bond with the PC. Bonding is important as it will prevent you from having to do the pairing again in the future. However, pairing/bonding is managed by the iPhone's OS so you cannot write it in your application, so the workaround is to have an encrypted characteristic on the PC side that will force the iPhone to bond (this is covered later).
On the PC side, you need to have a BlueZ script that acts as a peripheral that is always advertising. You can do this using bluetoothctl (check the examples here and here).
Before you start advertising, you need to have a GATT server on the PC side (to do this, check this example).
When registering characteristics, ensure that one of them has the encrypt-read property (you can find a full list of the properties here).
Now when you attempt to read this characteristic from the iOS side, the two devices should bond (make sure that your PC is bondable which you can do this via these commands).
Once the devices are paired, your iOS app needs to be working in the background constantly scanning and attempting to connect to the same peripheral (have a look at this and this example).
You can find more useful information at the links below:-
Getting started with Bluetooth Low Energy
The Ultimate Guide to CoreBluetooth Development
How to manage Bluetooth devices on Linux using bluetoothctl
I know that bluetooth uses hoping, and because of this difficult to intercept traffic.
Сan i put my dong into monitoring mode?
If for example are 30 devices nearby, and i will always listen just one bluetooth channel, and my dongle works in monitor mode, should i get sometimes some data?
Can i use for these purposes Hcidump or tcpdump?
If I understand correctly, if bluetooth device does not have a password, i can directly interact with its services(with hcitool and tmux).?
I read that i can watch the battery level, device name, and other information.
PS: sorry for bad english.
It is possible to monitor traffic between Bluetooth devices but I am quite sure that your default laptop dongle is not capable of doing that.
Before establishing connection between two Bluetooth devices, they send connection request/response packets on primary advertising channels (37th, 38th, 39th channel). You need to capture these packets to learn hopping pattern, connection interval and etc. After receiving packets, you can monitor insecure Bluetooth connections. However it is hard to monitor 30 device simultaneously because you need to make time division between each connection.
Let's answer your questions.
It might be possible but you need to write driver level code.
It might be possible. As I mentioned, it is good approach to capture connection request/response packets before monitoring devices.
I have no idea about these tools.
To manipulate services, you need to know service handle and duplicate GATT client's mac address. I am not sure that, this method will work.
I am looking for a way to scan a device I own and discover "what it can do".
In other words, I'd like to know if a device is able to describe the way you have to communicate with it in order to build some application around it.
In my case it is a simple Christmas light that I'd like to play with but this could be used in different situations.
For classic bluetooth (BR/EDR):
When scanning for bluetooth devices (Inquiry), the bluetooth device will send an inquiry response (if it wants to be discovered) and maybe also an extended inquiry response (EIR). This EIR may already contain a list of services, the devices supports. This is a very fast way to get a picture of a remote device.
Moreover, the service discovery protocol (SDP) gives more information on a device. This takes some more steps. In SDP two devices can exchange their capabilites in kind of ping pong process.
For BLE:
After connecting a BLE device usually a service discovery takes place. The BLE peripheral (e.g. headset or a light) reports its capabilities to the central (e.g. smart phone). Some of these services have predefines functionalities. Additionally, it is free to the manufacturer to add custom services.
I'm researching iBeacons. Can I connect to iBeacons while my Bluetooth is invisible (to be protected from hacks)?
I don't have beacons to test myself and can't find any clear explanation online.
iBeacons connect to mobile phones using Bluetooth, so it is essential to have that turned on. You also need to have installed an app with iBeacon support in order to receive communication from them.
If you'd wish to use a solution that does not utilize Bluetooth, you could try out IndoorAtlas. It's an indoor navigation technology based on Earth's geomagnetic fields. It's also completely hardware-free solution, just requires you to collect fingerprints in the area you are going to use for your project.
Three points:
iBeacon technology does not rely on a bluetooth connection to your phone. Beacons are one way transmitters. They do not listen to or otherwise receive any info from your device. Beacon technology following this model is inherently privacy friendly.
Mobile devices cannot detect Bluetooth beacons with the Bluetooth radio turned off. Sorry, it is just not possible.
Properly built beacon apps will not expose your mobile device's Bluetooth info because they are receive only. Of course, other apps on your phone might use bluetooth for other purposes, so your best bet is to audit apps using bluetooth and remove any that are not doing what you want.
I just bought some beacons and tested that, The answer is YES. it is possible to read beacons mac addresses while using the phone's Bluetooth connection as invisible. Using this you will get access to your beacon in any open place without getting hacked through Bluetooth.
Thanks all for your answers.
I'm not sure how to correctly phrase this question, as I'm just starting to learn Bluetooth and its ways, but... imagine holding in an iPhone or Android phone in your hand in a large building with many rooms. You pair your device with a Bluetooth master device via an antenna in that room. Then once you move from room to room, your device communicates with other antennas throughout the building, but the device treats it as one pairing.
Is this at all possible? Was Bluetooth developed with this in mind at all?
Would this still work if the antennas were wireless? My idea is for devices to communicate with nodes via Bluetooth, and nodes interact with central base via wi-fi/local router.
Also, third random question: how does using BLE affect any of this?
Please tell me if I'm crazy! Thanks!
Bluetooth 4.0 BLE allows for a slave to connect to one master. 4.1 BLE allows for more than one connection, but I don't know if anything implements that yet.
Either way, there's no sort of "roaming" method pairing devices like with wifi access points with the same SSID. BLE however doesn't require pairing like regular Bluetooth, so you could just connect to a new access point each time you lose a connection.
You can also communicate via advertising packets from the "antenna" in each room. This would facilitate information being passed from those rooms to the phone, but not the other way around. This is basically how you communicate with BLE when you don't pair/connect devices and is how iBeacons work.
If you're writing the software yourself, and installing it in the building and on the phone, then I think it should be totally possible. Bluetooth devices can detect the distance and direction of other bluetooth devices. So if both devices are running software that is designed to, and grants permission to do so, it should be no-big-deal to programmatically auto-reconnect to the new nearest antenna whenever one becomes significantly closer than the one that your phone is currently connected to. As for software that already does this that you wouldn't have to develop from scratch yourself, no idea.