Whoops! We seem to have hit a snag. Please try again later.
Codeigniter 4 shows an error when I run the CI4 application, How I resolve?
Changes:
public $baseURL = 'http://ci.local';
public $baseURL = 'http://localhost:8080';
public $indexPage = '';
This work for me try it
Go to app directory then to boot directory you will see production.php file.
That is:
app => Config => Boot => production.php
Change the ini_set('display_errors', '0') to ini_set('display_errors', '1').
Warning: When in production change back to initial ini_set('display_errors', '0')
Or
you can rename your file env in your project directory to .env after that open it and edit.
Search for # CI_ENVIRONMENT = production remove # and change production to development
Warning: When in production change back to initial CI_ENVIRONMENT = development to CI_ENVIRONMENT = production
For those experiencing intl error go to where your php installation directory edit the php.ini file remove semi-colon ";" from ;extension=intl to extension=intl. save the file and restart your server. I think this will solve that error. This particular editing of my php.ini was on php 7.2 - 8.1 so I haven't check other version of php lesser than these versions which Codeigniter 4 does not support
After installing CodeIgniter 4 when you run the app then you will get an error like this
To know the error go to the app/Config/Boot/production.php and set display_errors to 1 as below
ini_set('display_errors', '1');
Now, you will see the actual error below
Nothing to worry about it. The app needs permission. Assign the permission like as below
sudo chmod -R 777 project_name
Assume that your root folder of your CI4 project is rootproject.
Edit rootproject/.env file.
On line 17 change from:
# CI_ENVIRONMENT = production
to:
CI_ENVIRONMENT = development
Save it.
Refresh your browser that pointing to your CI4 project.
It should give you many error messages.
If there is something written as CacheException, than your cache folders are not writable.
Make it writable;
Ubuntu:
chown -Rv www-data rootproject/writable
CentOS:
chown -Rv apache rootproject/writable
Easy way:
chmod 777 -Rv rootproject/writable
In your CI4 project root, create a file named .env. It should be in the same directory as system, app e.t.c
Then, add this CI_ENVIRONMENT = development
The problem is most likely due to missing extensions. Check server requirements here.. Check your php.ini file and make sure intl and mbstring are enabled.
I had the same problem, I have a simple solution for Mac.
- in the project folder, go to 'writable'
- select all the folders contained and click on 'get information'
- go share and permissions
- in 'everyone' select 'read and write'
That's it! refresh the page
Try This
Open [xampp]/php/php.ini
Search for ;extension=intl and remove the ;
Save the php.ini file and restart Apache(server).
In Root folder change: env to .env
Change # CI_ENVIRONMENT = production to CI_ENVIRONMENT = development (ensure it is uncommented)
Your error may be related to the knit.php file.
Go to System/Third Party and change: knit.php to Knit.php (Capital)
Reload.
For those using XAMPP in MacOS:
You don't need to change the ownership of the writable directory. You only need to change permission to entire directory:
chmod -R 777 writable
When you change # CI_ENVIRONMENT = production to CI_ENVIRONMENT = development don't forget of rename the env file to .env else it will not work.
You're running in the production environment and need to change it to a Development or Testing environment to see the error messages within the browser.
There are a few ways to do this, but adding:
SetEnv CI_ENVIRONMENT development
To the Apache httpd.config file is what worked for me.
_t
I got the answer for this query; just follow these steps:
From the command line, at your project root just hit this
php spark serve
Then hit this on your browser http://localhost:8080/
Enjoy your Latest CI.
Not sure what the desired answer is, but:
If you are asking to see what is the actual error is - either change
your environment to testing/development (as suggested so far) or you
can check your logs - writable/logs/log-.php
If you wish to solve the error, we will need more information, like have
you setup virtual hosts, have you change .htaccess file in public
folder, etc. Otherwise we will be most likely betting (I bet it's virtual hosts).
In any case, a copy of the displayed error (after changing evnironment) or log file will be useful.
You can check logs file on writable/logs find error information,
If your logs information like :
CRITICAL - 2020-04-19 17:44:55 --> Invalid file: template/header.php
#0 F:\xampp\htdocs\ppdb\vendor\codeigniter4\framework\system\View\View.php(224): CodeIgniter\Exceptions\FrameworkException::forInvalidFile('template/header...')
And go fix your error, in my case i am wrong typed name on controller file
In Codeigniter 4 source code have a folder named writable, just update it's access permission. Sometimes it'll help to get rid of Whoops. Also can check the video for Ubuntu / Linux
I have Windows 2008 R2 Server with IIS 7.5.
I am trying to serve static files with non-English (Hebrew) names, but cannot get it working.
I have 4 files:
a.jpg
א.jpg
b.txt
ב.txt
When I try to go to http://.../a.jpg and http://.../b.txt, I am getting the right files.
But when I try to access http://.../א.jpg or http://.../ב.txt it won't work.
Even if I encode the file names before going to url i.e http://../%D7%90.jpg it won't work as well.
I am getting a regular 404 server error:
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
I tried the following, but it didin't help:
1.adding globalization settings to web.config:
<configuration>
<system.web>
<globalization
fileEncoding="utf-8"
requestEncoding="utf-8"
responseEncoding="utf-8"
/>
</system.web>
</configuration>
2.adding .jpg and .txt to MIME Types settings in IIS.
What am I missing here?
I found a solution to this problem.
It was all about UrlScan IIS extension...
All I had to do is:
Go to the UrlScan folder inside windir%\system32\inetsrv [32bit] and %windir%\syswow64\inetsrv [64bit]
Open UrlScan.ini and change AllowHighBitCharacters to 1
I need to remove a big amount of virtual directories, some of them don't have associated physical directories.
Ideas?
As you need to remove a large amount, I'm guessing you'll want to use some form of script.
IIS 6.0, using IISvdir.vbs( article # MSDN):
At the command prompt, use the cd command to change to the directory where the Iisvdir.vbs script is installed. The default location for this file is systemroot/system32/iisvdir.vbs.
At the command prompt, type:
cscript iisvdir.vbs /delete "Sample Web Site" VirtualDirectoryName.
Substitute your Web site name and virtual directory name as appropriate. If there are spaces in the Web site name, use quotation marks around the Web site name, as shown in the preceding example.
IIS 7 using AppCmd.exe (article # TechNet):
To remove a virtual directory, use the following syntax:
appcmd delete vdir /vdir.name: string
The variable vdir.namestring is the virtual path of the virtual directory.
For example, to remove a virtual directory named photos from the root application of a site named contoso, type the following at the command prompt, and then press ENTER:
appcmd delete vdir /vdir.name: contoso / photos
To remove a virtual directory named photos from an application named marketing in a site named contoso, type the following at the command prompt, and then press ENTER:
appcmd delete vdir /vdir.name: contoso / marketing / photos
HTH
You could also write an msbuild script to do this and use the msbuild extension pack which is available here. I have used this successfully to do exactly what you are saying for 100s of vdirs in iis 6 AND in iis 7.5.
Its pretty simple and took me longer to write the .proj file than it did to figure out how to do it.
have fun :)
the resultant msbuild target would look like as follows
<Target Name="IIS7VirtualDirectories:Delete">
<MSBuild.ExtensionPack.Web.Iis7Application
TaskAction="Delete"
Website="%(Application.WebsiteName)"
Applications="#(Application)"
MachineName="$(MachineName)"
ContinueOnError="false"/>
<MSBuild.ExtensionPack.Web.Iis7Website
TaskAction="DeleteVirtualDirectory"
Name="%(VirtualDirectory.WebsiteName)"
VirtualDirectories="#(VirtualDirectory)"
ContinueOnError="false"
MachineName="$(MachineName)"/>
</Target>
Where Application and VirtualDirectory are defined in an external proj file :)
PHP 5.2.17
joomla 1.6.4
1and1 Linux shared server
php is running as cgi
Hi, I am trying to use a custom php.ini throughout my website. I know I can put a php.ini file in each folder, but that would not be feasible.
I searched online and found the following method:
1 - create your custom php.ini file and put it inside path/to/your/website/cgi-bin folder
2 - create the following php.cgi file
#!/bin/sh
exec /usr/local/bin/php5 -c path/to/your/website/cgi-bin
3 - upload php.cgi to /path/to/your/website/cgi-bin
4 - chmod +x php.cgi to make it executable
5 - include the following line inside .htaccess in my website root
Action application/x-httpd-php5 /path/to/your/website/cgi-bin/php.cgi
According to my understanding, after doing the above, php scripts on my website would start using my custom php.ini file instead of the default one.
Anyone can help? I spent a better part of the day trying to resolve this issue without success.
By the way, my account root (one level above my website root) has a .htaccess file with the following lines:
AddType x-mapp-php5 .php
AddHandler x-mapp-php5 .php
Thank you.
UPDATE 9/2/2011 - 19:37
tried including the following statement in .htaccess
SetEnv PHPRC /path/to/my/website/cgi-bin <- where my custom php.ini file is located.
According to this website it should have worked -> http://support.premiumreseller.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=85
But still nothing.
I will keep trying.
Any help appreciated!!!
UPDATE 2 - 9/3/2011 - 0:03 (WORKAROUND)
So, I couldn't find a solution for my problem. I decided to create a small php script to create hard links to php.ini in each directory that has a php script.
See below the code in case you are curious:
<?php
define('ROOT_DIR', $_SERVER['DOCUMENT_ROOT']);
define('FILE_PHPINI', ROOT_DIR . "/cgi-bin/php.ini");
processdir(ROOT_DIR);
function processdir($path)
{
$FlagNoPHP = true;
$localPHPINI = $path . "/php.ini";
foreach ( new DirectoryIterator($path) as $file)
{
if (!($file->isDot()))
{
if ($file->isDir())
{
processdir($path . "/" . $file);
}
else if ($FlagNoPHP && fnmatch("*.php*", $file))
{
$FlagNoPHP = false;
if (!file_exists($localPHPINI))
{
link(FILE_PHPINI, $localPHPINI);
}
}
}
}
if ($FlagNoPHP)
{
if (file_exists($localPHPINI))
{
unlink($localPHPINI);
}
}
}
?>
The above code looks inside each directory in my website and:
1 - if there is a php script and NO php.ini, creates a hard link to php.ini
2 - if there is NO php script and there is a php.ini, deletes the hard link (done in the last if of the function). I included this in order to clean up the filesystem of old php.ini files.
This worked for me.
I am still curious about an answer to my original problem.
I hope this helps someone!
Seems like you're taking the long way. Just modify .bashrc:
export PHPRC="/Volumes/Mac_Daddy/web_curr/public_html/php_osx.ini"
Result:
Configuration File (php.ini) Path: /usr/local/php5/lib
Loaded Configuration File: /Volumes/Mac_Daddy/web_curr/public_html/php_osx.ini
Scan for additional .ini files in: /usr/local/php5/php.d
Additional .ini files parsed: /usr/local/php5/php.d/10-extension_dir.ini
Or create an alias:
alias myphp="/usr/local/php5/bin/php -c /somewhere/someplace/php.ini"
or better yet man php.
We are trying to provide a download link to abc.jad file in index.html. abc.jad and index.html are both in the same folder. Following is the link.
download
In addition, we defined the mime type for .jad file in web.config as follows
<mimeMap fileExtension=".jad" mimeType="text/vnd.sun.j2me.app-descriptor" />
In spite of these, we are still not able to download this file from the web browser. It always gives the error HTTP Error 404 - File or directory not found
The server is IIS with .net 2.0
Can you please help?
i know is a little bit late but you are missing these MIME types:
(you have to set these types to your folder on IIS Admin Console)
.cod
application/vnd.rim.cod
.jad
text/vnd.sun.j2me.app-descriptor
.jar
application/java-archive