Our team has built a small CLI used for maintenance. The package.json specifies a path for with the bin property, and everything works great; "bin": { "eddy": "./dist/src/cli/entry.js"}
Autocompletion is achived by using yargs#17.0.1. However we recently converted the project to use es6 modules, because of a migration to Sveltekit, i.e. the package.json now contains type: module. Because of this, the CLI now only works if we run with:
what works
node --experimental-specifier-resolution=node ./dist/src/cli/entry.js help
However, if we run this without the flag, we get an error "module not found":
Error [ERR_MODULE_NOT_FOUND]: Cannot find module...
So the question is
Can we somehow "always" add the experimental-specifier-resolution=node to the CLI - so we can continue to use the shorthand eddy, and utilize auto completion?
There are two probable solutions here.
Solution 1
Your entry.js file should start with a shebang like #!/usr/bin/env node. You cannot specify the flag directly here, however, if you could provide the absolute path to node directly in the shebang, you can specify the flag.
Assuming you have node installed in /usr/bin/node, you can write the shebang in entry.js like:
#!/usr/bin/node --experimental-specifier-resolution=node
(Use which node to find the absolute path)
However, this is not a very portable solution. You cannot always assume everyone has node installed in the same path. Also some may use nvm to manage versions and can have multiple version in different path. This is the reason why we use /usr/bin/env to find the required node installation in the first place. This leads to the second solution.
Solution 2
You can create a shell script that would intern call the cli entry point with the required flags. This shell script can be specified in the package.json bin section.
The shell script (entry.sh) should look like:
#!/usr/bin/env bash
/usr/bin/env node --experimental-specifier-resolution=node ./entry.js "$#"
Then, in your package.json, replace bin with:
"bin": { "eddy": "./dist/src/cli/entry.sh"}
So when you run eddy, it will run the entry.js using node with the required flag. The "$#" in the command will be replaced by any arguments that you pass to eddy.
So eddy help will translate to /usr/bin/env node --experimental-specifier-resolution=node ./entry.js help
Just add a script to your package.json:Assuming index.js is your entry point and package.json is in the same directory
{
"scripts": {
"start": "node --experimental-specifier-resolution=node index.js"
}
}
Then you can just run on your console:
npm start
I'm currently working on a NodeJS project that uses TypeScript, and I'm currently trying to test my application using Mocha. The main issue I am having is that I am getting a warning when I am trying to get Mocha to load the dotenv module in the Terminal and have the .env path be configured to: .env.test
This is the command I used:
mocha -r ts-node/register -r dotenv/config 'tests/**/*.ts' dotenv_config_path=.env.test
When executing this command, Mocha gives me the following warning:
Warning: Cannot find any files matching pattern "dotenv_config_path=.env.test"
But afterwards, it successfully loads the dotenv module with the .env.test path, and it's able to go through all my test cases without any errors.
Is there any way to get rid of this warning? Or what is the preferred setup so that I wouldn't get this warning to begin with?
As #jonrsharpe had pointed out, it turns out that I forgot the -- before configuring my dotenv_config_path.
The complete command now is:
mocha -r ts-node/register -r dotenv/config 'tests/**/*.ts' --dotenv_config_path=.env.test
I'm updating from Material-UI 0.x to 1.0.
The docs for migration-helper say to run:
jscodeshift -t <codemod-script> <path>.
I've never used jscodeshift before, and I've never seen the notation before, so I would like to get some advice on how to use this. :) Googling jscodeshift codemod-script brings up nothing relevant.
What does codemod-script need to be?
It took me a bit to figure this out. After you've installed jscodeshift and the material-ui codemods, the command should be formatted as follows:
jscodeshift -t <the file path of the specific code mod file> <the location of the files you want to process>
jscodeshift -t ./node_modules/#material-ui/codemod/lib/v1.0.0/svg-icon-imports.js ./src/
I also use the extension jsx for my files so I had to add the --extensions flag:
jscodeshift -t ./node_modules/#material-ui/codemod/lib/v1.0.0/svg-icon-imports.js ./src/ --extensions jsx
So when running the following command I'm expecting node-sass to compile and start watching. If I have to run a separate node-sass -w command wouldn't I have to include all the same parameters I included on the first? Seems like an odd way of doing things.
node-sass app/styles -o app/styles --source-map true --include-path app/bower_components --quiet --watch
Actually watch triggers compilation each and every time the file changes, as the (sass) documentation states:
You can also tell Sass to watch the file and update the CSS every time the Sass file changes: [...]
However, the documentation says nothing about what happens when the watch process starts, which is what led you to expect it to compile right after being invoked.
It's, for sure, an odd way of doing things.
I'm having a surprisingly hard time finding an answer to this. With plain Node.JS, you can run any js file with node path/to/file.js, with CoffeeScript it's coffee hello.coffee and ES6 has babel-node hello.js. How do I do the same with Typescript?
My project has a tsconfig.json which is used by Webpack/ts-loader to build a nice little bundle for the browser. I have a need for a build step run from the console before that, though, that would use some of the .ts files used in the project to generate a schema, but I can't seem to be able to run a single Typescript file without compiling the whole project.
How do I do the same with Typescript
You can leave tsc running in watch mode using tsc -w -p . and it will generate .js files for you in a live fashion, so you can run node foo.js like normal
TS Node
There is ts-node : https://github.com/TypeStrong/ts-node that will compile the code on the fly and run it through node 🌹
npx ts-node src/foo.ts
Run the below commands and install the required packages globally:
npm install -g ts-node typescript '#types/node'
Now run the following command to execute a typescript file:
ts-node typescript-file.ts
We have following steps:
First you need to install typescript
npm install -g typescript
Create one file helloworld.ts
function hello(person){
return "Hello, " + person;
}
let user = "Aamod Tiwari";
const result = hello(user);
console.log("Result", result)
Open command prompt and type the following command
tsc helloworld.ts
Again run the command
node helloworld.js
Result will display on console
To add to #Aamod answer above, If you want to use one command line to compile and run your code, you can use the following:
Windows:
tsc main.ts | node main.js
Linux / macOS:
tsc main.ts && node main.js
Edit: May 2022
ts-node now has an --esm flag use it.
Old Answer:
None of the other answers discuss how to run a TypeScript script that uses modules, and especially modern ES Modules.
First off, ts-node doesn't work in that scenario, as of March 2020. So we'll settle for tsc followed by node.
Second, TypeScript still can't output .mjs files. So we'll settle for .js files and "type": "module" in package.json.
Third, you want clean import lines, without specifying the .js extension (which would be confusing in .ts files):
import { Lib } from './Lib';
Well, that's non-trivial. Node requires specifying extensions on imports, unless you use the experimental-specifier-resolution=node flag. In this case, it would enable Node to look for Lib.js or Lib/index.js when you only specify ./Lib on the import line.
Fourth, there's still a snag: if you have a different main filename than index.js in your package, Node won't find it.
Transpiling makes things a lot messier than running vanilla Node.
Here's a sample repo with a modern TypeScript project structure, generating ES Module code.
I created #digitak/esrun, a thin wrapper around esbuild and that executes a TypeScript file almost instantly. esrun was made because I was disappointed with ts-node: too slow, and just didn't work most of the time.
Advantages of esrun over ts-node include:
very fast (uses esbuild),
can import ESM as well as CJS (just use the libraries of your choice and esrun will work out of the box),
there is an included watch mode, run your script with the --watch option and any change to your entry file or any of its dependencies will re-trigger the result
you can use esrun in inspect mode to use the DevTools console instead of your terminal console.
After installing, just run:
npx #digitak/esrun file.ts
Just helpful information - here is newest TypeScript / JavaScript runtime Deno.
It was created by the creator of node Ryan Dahl, based on what he would do differently if he could start fresh.
You can also try tsx.
tsx is a CLI command (alternative to node) for seamlessly running TypeScript, its build upon esbuild so its very fast.
https://github.com/esbuild-kit/tsx
Example:
npx tsx ./script.ts
As of May 2022 ts-node does support es modules
npx ts-node --esm file.ts
you will likely need to add "type": "module", to your package.json. And some of the imports might be wonky unless you turn on experimental-specifier-resolution=node
npmjs.com/package/ts-node#commonjs-vs-native-ecmascript-modules
For linux / mac you can add the ts-node-script shebang.
Install typescript / ts-node globally (see 1 below for non global install):
npm install ts-node typescript --save-dev --global
Add this as the first line in your .ts file:
#!/usr/bin/env ts-node-script
Then make the file executable:
$ chmod +x ./your-file.ts
You can then run the file directly from the command line:
$ ./your-file.ts
Notes:
1 For non global install you can install local to your project
npm install ts-node typescript --save-dev
and add the relative path to the shebang script eg:
#!/usr/bin/env ./node_modules/.bin/ts-node-script
2 Support for shebangs was officially added in ts-node v8.9.0.
Like Zeeshan Ahmad's answer, I also think ts-node is the way to go. I would also add a shebang and make it executable, so you can just run it directly.
Install typescript and ts-node globally:
npm install -g ts-node typescript
or
yarn global add ts-node typescript
Create a file hello with this content:
#!/usr/bin/env ts-node-script
import * as os from 'os'
function hello(name: string) {
return 'Hello, ' + name
}
const user = os.userInfo().username
console.log(`Result: ${hello(user)}`)
As you can see, line one has the shebang for ts-node
Run directly by just executing the file
$ ./hello
Result: Hello, root
Some notes:
This does not seem to work with ES modules, as Dan Dascalescu has pointed out.
See this issue discussing the best way to make a command line script with package linking, provided by Kaspar Etter. I have improved the shebang accordingly
Update 2020-04-06: Some changes after great input in the comments: Update shebang to use ts-node-script instead of ts-node, link to issues in ts-node.
Write yourself a simple bash wrapper may helps.
#!/bin/bash
npx tsc $1 && node ${1%%.ts}
For environments such as Webstorm where the node command cannot be changed to ts-node or npx:
npm install ts-node typescript (Install dependencies)
node --require ts-node/register src/foo.ts (Add --require ts-node/register to "Node parameters")
This answer may be premature, but deno supports running both TS and JS out of the box.
Based on your development environment, moving to Deno (and learning about it) might be too much, but hopefully this answer helps someone in the future.
Just in case anyone is insane like me and wants to just run typescript script as though it was a .js script, you can try this. I've written a hacky script that appears to execute the .ts script using node.
#!/usr/bin/env bash
NODEPATH="$HOME/.nvm/versions/node/v8.11.3/bin" # set path to your node/tsc
export TSC="$NODEPATH/tsc"
export NODE="$NODEPATH/node"
TSCFILE=$1 # only parameter is the name of the ts file you created.
function show_usage() {
echo "ts2node [ts file]"
exit 0
}
if [ "$TSCFILE" == "" ]
then
show_usage;
fi
JSFILE="$(echo $TSCFILE|cut -d"." -f 1).js"
$TSC $TSCFILE && $NODE $JSFILE
You can do this or write your own but essentially, it creates the .js file and then uses node to run it like so:
# tsrun myscript.ts
Simple. Just make sure your script only has one "." else you'll need to change your JSFILE in a different way than what I've shown.
Install ts-node node module globally.
Create node runtime configuration (for IDE) or use node in command line to run below file js file (The path is for windows, but you can do it for linux as well)
~\AppData\Roaming\npm\node_modules\ts-node\dist\bin.js
Give your ts file path as a command line argument.
Run Or Debug as you like.
Create your TypeScript file (ex. app.ts)
npm i -D typescript ts-node -> to install the dev dependencies local
npx nodemon app.ts
Using nodemon, automatically recompile app.ts every time you change the file
Here is the command
tsc index.ts --outDir .temp && node .temp/index.js && rm -rf .temp
<<<<<<<<< Compile >>>>>>>>> <<<<<<< Run >>>>>>> << Clean >>
There is also an option to run code directly from the CLI, not the *.ts file itself.
It's perfectly described in the ts-node manual.
As a first step, install ts-node globally via npm, yarn, or whatever you like.
...and now just use ts-node -e 'console.log("Hello, world!")' (you may also add the -p flag for printing code)
This little command is perfect for checking, does everything installed fine. And for finding some other error, relevant with tsconfig.json options.
We can run it using nodemon as well
nodemon ./filepath/filename.ts
This question was posted in 2015. In 2018, node recognizes both .js and .ts. So, running node file.ts will also run.