I'm trying to make a realtime application with Asterisk 15 ARI, and I need to get all agents/users (sip) status in queue...
I need to know if the user has logged in queue, is on pause, in a call...
I'm reading the Asterisk ARI docs but not found anything about that.
I'm using node-ari-client to watch the Stasis events.
Thanks for u help.
I think AMI is more adequate for this purpose, as ARI is more suitable to build your dialplan application.
You may use AMI action QueueStatus to see who is logged in, paused, etc.
Maybe https://www.npmjs.com/package/asterisk-ami-client will help you to build the client.
ARI allows to get current state of SIP peers via
http://localhost:8088/ari/endpoints/SIP
[
{
"technology": "SIP",
"resource": "111",
"state": "online",
"channel_ids": []
},
{
"technology": "SIP",
"resource": "222",
"state": "offline",
"channel_ids": []
},
{
"technology": "SIP",
"resource": "333",
"state": "unknown",
"channel_ids": []
},
]
Related
I have an application within watson assistant that consumes many services from other endpoints. and I would like to call this conversation (from watson) within a google assistant conversation in a certain intention. for example i will develop a rich conversation on google assistant and in one of the options i will call watson's conversation.
I tried as follows, but it didn't work. does anyone know any example that can help me?
{"locale": "pt-BR",
"actions": [
{
"description": "Launch intent",
"name": "MAIN",
"fulfillment": {
"conversationName": "mainConversation"
},
"intent": {
"name": "actions.intent.MAIN"
}
},
{
"description": "Direct access",
"name": "BUY",
"fulfillment": {
"conversationName": "ExampleAction"
},
"intent": {
"name": "com.example.ExampleAction.BUY",
"trigger": {
"queryPatterns": [
"teste",
"azul",
"start"
]
}
}
}
],
"conversations": {
"mainConversation": {
"name": "mainConversation",
"url": "https://us-central1-ericanovo-798cc.cloudfunctions.net/webhook",
"fulfillmentApiVersion": 2
},
"BUY": {
"name": "ExampleAction",
"url": "https://orquestrador-sulamerica-teste.mybluemix.net/api/v1/chat/google?externaltoken=574213c0-e904-11e9-9970-ff484aa25334",
"fulfillmentApiVersion": 2
}
}
}
thanks
That won't work because the webhook for everything published under the same project has to be the same URL. You are expected to handle all the Intents and "actions" at that webhook.
In your case, you would also need to make sure the request is formatted the way the Watson API would be expecting it. The Assistant will send it using the Conversation Webhook Format, and it sounds like you would send it using Watson's Analyze Text API.
You're not showing any of your code, so it is difficult to be sure - but the first would be in a JSON format that you can extract. You can then use a library in Node (such as request-promise to make the calls to Watson. Based on the result from Watson, you'd need to format the results as a response and return it to the Assistant.
It isn't clear why you'd need multiple webhooks specifically, although it is certainly possible that some Intents may make different API calls than others.
Keep in mind that your custom Intents will only be valid on invocation. Subsequent Intents will all be TEXT Intents.
So I live in europe and we are obligated to have taxes already included in the price displayed to the user and I was wondering how I could do this with Paypal sdk.
My billing_plan_attributes:
billing_plan_attributes = {
"name": request.args['name'],
"description": request.args['description'],
"merchant_preferences": {
"auto_bill_amount": "yes",
"cancel_url": "https://ruby-eu.com/profile/settings/paypal/cancel/token",
"initial_fail_amount_action": "continue",
"max_fail_attempts": "1",
"return_url": 'https://ruby-eu.com/profile/settings/paypal/subscribe/execute',
"setup_fee": {
"currency": request.args['currency'],
"value": request.args['setup_fee']
}
},
"payment_definitions": [
{
"amount": {
"currency": request.args['currency'],
"value": request.args['amount']
},
"cycles": request.args['cycles'],
"frequency": request.args['frequency'],
"frequency_interval": request.args['frequency_interval'],
"name": request.args['payment_name'],
"type": request.args['payment_type'],
}
],
"type": request.args['type']
}
I tried adding
"taxes": {
"percentage": "23",
"inclusive": True
}
inside merchant_preferences, payment_defenitions and under type but when I run it they return
Problem while creating a new plan: Incoming JSON request does not map to API request
and I don't know how could I fix this issue.
In case you're wondering if the problem is somewhere else I removed the taxes from the JSON and run and it worked.
First of all know that the depcrecated billing plan object in the Python SDK does NOT correspond to the new plans object in the new Subscriptions API. If you want to use the Subscriptions API (and you probably should), you need to integrate with direct HTTPS API calls, NOT any of the old SDKs. Basically, look at the CURL calls you see here: https://developer.paypal.com/docs/subscriptions/integrate/ ... and implement their equivalents from Python.
The billing plans objects of the Subscriptions API do support the syntax you were trying to add, so my guess is that is where you got it from: https://developer.paypal.com/docs/api/subscriptions/v1/#plans_create
I had a scenario in which I need to forward call from two phone's using same Nexmo LVN.
So its like this
1. Phone_1 forwards call to Number_2 using LVN_1.
2. Phone_2 will forward call to NUMBER_2 using same LVN_1.
Is this doable? If yes then how can we do it. I think call center does this type of scenario.
This is possible with a single LVN. When you receive a call, you can use a connect action to dial out to another number. You'll need to change from to your LVN, and number to the phone number you want to forward on to in this example
[
{
"action": "connect",
"eventUrl": ["https://example.com/events"],
"timeout": "45",
"from": "447700900000",
"endpoint": [
{
"type": "phone",
"number": "447700900001"
}
]
}
]
I'm new to Api.ai , i read the doc. but i didn't understand how Api.ai works better with many parameters.
I'll try to explain by an example :
I have a Management software which manages the members/actions/projects , where i can get the actions of any member at any project using the normal interface.
let's replace this with a smart bot where the chat will run as i expected below,
USER : i want to see my actions for ANY PROJECT NAME HERE
bot : your action is XXXXXX.
OR
USER: give me all the members of the project ANY PROJECT NAME
Bot: Members are "1-2-3-4-5-...."
i think you got what i mean , if you need more i can explain more.How can i let Api.ai understands this ?
For API.ai to 'remember' values (ie store and retrieve information such as the names of projects, actions and team members) you will need to connect API.ai to a webhook/database of your own, there isn't anyway for API.ai to do this on its own.
Once you connect API.ai to a custom webhook/database you can use the variables that API.ai will parse for you to run your query. You simply need to build the intents corresponding to the search and parameters involved
Here's how the process would flow:
User asks "I want to see my actions for [ANY PROJECT NAME HERE]"
API ai logic recognizes this as the intent 'search-action' for $project_name, you having set this up in API.ai like this
Your custom webhook receives JSON response from API.ai that in this case would look like this:
{
"id": "REDACTED",
"timestamp": "2017-04-19T03:18:18.028Z",
"lang": "en",
"result": {
"source": "agent",
"resolvedQuery": "I want to see my actions for project Unicorn",
"action": "search-action",
"actionIncomplete": false,
"parameters": {
"project_name": "project Unicorn"
},
"contexts": [],
"metadata": {
"intentId": "REDACTED",
"webhookUsed": "false",
"webhookForSlotFillingUsed": "false",
"intentName": "Search - Actions"
},
"fulfillment": {
"speech": "",
"messages": [
{
"type": 0,
"speech": ""
}
]
},
"score": 1
},
"status": {
"code": 200,
"errorType": "success"
},
"sessionId": "REDACTED"
}
So, your webhook has logic that recognizes when result.action is 'search-action' is should run a database search for actions in project result.parameters.project_name
Your webhook fulfills the API.ai request, or alternatively, sends message to message platform directly (ie Facebook messenger)
update !important: The API has changed a lot, this question shouldn't be taken into consideration anymore
I am trying to use the REST api (via Node.js API) to create cards that the user can respond to and create an interaction in this way.
Reading the docs the creator attribute is not really specified anywhere, so I have no idea how to insert that.
Also this video doesn't help. Nor this guide =)
I believe there is an URL I should set as callback somehow? I'd like to know how to get these responses, please.
update
This is the card I am sending.
{
bundleId: 'veryuniqueBundle',
id: 'veryuniqueBundle:reply',
text: "want to hear moar?",
menuItems: [
{action: "REPLY"}
]
}
that's the response I get:
{
"collection": "timeline",
"itemId": "119c4dc8-c0ce-4a83-aa76-41aab4e8dbe1",
"operation": "INSERT",
"verifyToken": "42",
"userToken": "id:520ef63cde31145deb000001",
"userActions": [
{
"type": "REPLY"
}
]
}
The problem is, I can't see what the user responded (an text) and the reference to the original card id (or bundle) that was responded to. How can I get those
Cards do not provide a direct callback. Instead, when a user selects a menu item it causes the card to be updated with their menu selection. This change subsequently triggers a notification ping to your timeline subscription.
Follow these steps to detect a menu item selection:
Subscribe to notifications for changes in the timeline collection
{
"collection": "timeline",
"userToken": "awesome_kitty",
"verifyToken": "random_hash_to_verify_referer",
}
Insert a timeline card with a custom menu item
{
"text": "Hello world",
"menuItems": [
{
"action": "CUSTOM",
"id": "complete"
"values": [{
"displayName": "Complete",
"iconUrl": "http://example.com/icons/complete.png"
}]
}
]
}
Select the item on Glass
Receive the notification on your subscription URL
{
"collection": "timeline",
"itemId": "3hidvm0xez6r8_dacdb3103b8b604_h8rpllg",
"operation": "UPDATE",
"userToken": "harold_penguin",
"userActions": [
{
"type": "CUSTOM",
"payload": "PING"
}
]
}
Do cool stuff in your code
???
Profit