I am using a command terminal inside a VirtualBox CentOS 7 linux system. I am attempting to create a tar file into a seperate directory that contains all the files in my current directory that start with the letter "a".
I have tried tar -cvf fileName.tar /newDirectory ls a* but I think that I'm doing something wrong. I assume this should only take one line of the command terminal to execute, does anybody know the right way to do it?
The first parameter is the tar file name (full path) and the second is the files you want take. Try it:
tar -cvf newDirectory/fileName.tar a*
Related
I have a few sub-directories with files inside each of them in /home/user/archived/myFiles that I'm trying to bundle into a single tar file. The issue is, it keeps bundling a full directory path instead of just everything in the myFiles folder.
When I untar the file, I just want all the bundled sub-directories/files inside to appear in the directory I extracted the file rather than having to go through a series of folders that get created.
Instead, when I currently untar the file, I get a "home" folder and I have to go through /home/user/archived/myFiles to reach all the files.
I tried using the -C flag that I saw suggested online here Tar a directory, but don't store full absolute paths in the archive where you insert parameters for the full directory minus the last folder, and then the name of the last folder which contains all the stuff you want bundled. But the tar command doesn't work as I get a no such file or directory error.
#!/bin/bash
archivedDir="/home/user/archived/myFiles"
tar -czvf "archived-files.tar.gz" "${archivedDir}"/*
rm -vrf "${archivedDir}"/*
# Attempt with -C flag
#tar -cvf "${archivedDir}/archived-files.tar.gz" -C "${archivedDir}" "/*"
So for example, if I did an ls on /home/user/archived/myFiles, and it listed two directories called folderOne and folderTwo, and I ran this bash script and did an ls on /home/user/archived/myFiles again, that directory should only contain archived-files.tar.gz.
If I extracted the tar file, then folderOne and folderTwo would appear.
As I explain already here you should first change to this directory and then create the archive.
So change you script to something like:
archivedDir="/home/user/archived/myFiles"
cd $archivedDir
tar -czvf "../archived-files.tar.gz" *
This will create the archive in upper directory so you will not remove it with the next command.
the extraction should be something like:
archivedDir="/home/user/archived/myFiles"
cd $archivedDir
tar -xzvf "../archived-files.tar.gz"
I am trying to create a tar file but not place it in the current working directory but rather the parent of whatever the current working dir is.
I've tried the -C option but with no success.
Did you try like this
$ tar -cvf ../filename.tar ToBeArchivedFolder
Make sure you are using lower case 'c' in the command line options
I am trying to run some benchmarks which take in input a tar file.
Now there is a runme.sh inside the tar file and that needs to be modified and the folder has to be made a .tar again.
The original benchmark works, but the modifies one doesn't. I believe that it is a problem with the file format.
Note : My modification is not creating the problem. If I just uncompress the working tar and tar it again without modification, it does not work. Surprisingly the size of the new file changes.
What I tried :
file command on the working and non-working tar files.
Both returned same POSIX tar archive
Tried to run the command tar cvf folder_name.tar folder_name/
Does not work.
What works :
I am on Ubuntu (14.04) and I double clicked on the tar, directly edited the file I wanted and updated it. This works, but is not a feasible solution as I have a large number of files and I want to write a script to automate it.
Screenshot of how it works with GUI :
Does the original tar file include the top-level directory name? It doesn't look like it from your screenshot. If you re-create the tar file with a top level directory, as indicated by point 2 in the things you tried, the structure won't be the same, and whatever program is trying to consume the tar file won't be able to parse it.
How do you test "If I just uncompress the working tar and tar it again without modification, it does not work." In a GUI or in a shell? If in a shell - what exact commands do you use?
In a shell, you can get the contents of the tarball with the command tar -tf filename.tar. If all the files it lists starts with the same folder name, your tarball includes a top level directory. If it just lists various files and subdirectories, it doesn't. (Tarballs that don't are an abomination, but if whatever you are using them for requires it, you'll just have to cope.)
I'm guessing that if you do this on your original tar file and your modified, non-working tar file, the results will differ.
The following should work in a shell if you have/need a tarball without a toplevel directory:
$ mkdir workdir
$ cd workdir
$ tar -xf ../tarball.tar
<edit your file however you like>
$ tar -cf ../tarball-new.tar *
$ cd ..
$ rm -r workdir
In case you have/need a tarball with a toplevel directory, the following should suffice:
$ tar -xf ../tarball.tar
$ cd toplevel_directory
<edit your file however you like>
$ cd ..
$ tar -cf tarball-new.tar toplevel_directory
$ rm -r toplevel_directory
Edit: I'm glad it worked for you. The point is, of course, that tar includes the paths of the files it stores, not just the filenames. So if you need a flat list of files, you need to run tar in the directory containing those files, giving all of them as arguments to tar. If you try to take the shortcut of going up a level and only specifying the directory name to pack up, tar will include the directory name in the archive.
With PHP I am using exec("tar -xf archive.tar -C /home/user/target/folder") to extract the contents of a specific archive (archive.tar) into the target directory (/home/user/target/folder), so that all existing contents of the target directory will be overwritten by the new ones that are contained in the archive.
It works fine and all files in the target directory are being overwritten after extract, but there is one directory in the archive that I would like to omit (from extracting and thus overwriting the existing one in the target folder)...
For example, the archive.tar contains:
folderA/
folderB/
folderC/
folderD/
fileA.php
fileB.php
fileC.xml
How could I extract (and overwrite) all except (for example) folderC/? In other words, I want folderC and its contents to remain intact in the user's directory and not be overwritten by the one contained in the tar archive.
Any suggestions?
(Tar on the hosting server is GNU version 1.23.)
You can use '--exclude' to omit a folder:
tar -xf archive.tar -C /home/user/target/folder" --exclude="folderC"
There is the --exclude PATTERN option in the tar tool.
Check: tar on linuxcommand.org
To be on the safe side, you could remove all write permissions from the folder. For example:
$ chmod 000 folderC/
An then do a normal tar extract (as regular user). You'll get some error messages on console, but your folder will remain untouched.... At the end of the tar, change back your folder original permissions. For example:
$ chmod 775 folderC/
Of course '--exclude' tar option is the right solution to this particular problem, but, if you are not completely 100% sure about a command syntax, and yor're handling critical data, my solution puts you on the safe side :-).
Write --exclude='./folder' at the beginning of the tar command.
In your case that is,
exec("tar -x --exclude='./C' -f archive.tar -C /home/user/target/folder")
I have a directory containing a set of subdirectories and files. I need to recursively copy all the content of this directory to all the subdirectories of another directory, also recursively.
How do I achieve this, preferably without using a script and only with the cp command?
You can write this in a script but you don't have to. Just write it line by line in the terminal:
# $TARGET is the directory containing subdirectories where you want to STORE the copies
# $SOURCE is the directory containing the subdirectories you want to COPY
for dir in $(ls $TARGET); do
cp -r $SOURCE/* $TARGET/$dir
done
Only uses cp and runs on both bash and zsh.
You can't. cp can copy multiple sources but will only copy to a single destination. You need to arrange to invoke cp multiple times - once per destination - for what you want to do; using, as you say, a loop or some other tool.
The first part of the command before the pipe instruct tar to create an archive of everything in the current directory and write it to standard output (the – in place of a file-name frequently indicates stdout).
tar cf - * | ( cd /target; tar xfp -)
The commands within parentheses cause the shell to change directory to the target directory and untar data from standard input. Since the cd and tar commands are contained within parentheses, their actions are performed together.
The -p option in the tar extraction command directs tar to preserve permission and ownership information, if possible given the user executing the command. If you are running the command as superuser, this option is turned on by default and can be omitted.
Also you can use the following command, but it seems to be quite slower than tar;
cp -a * /target