I am trying to replace a different pattern for each column of my input file.
Input file
this- START
this- START
Result I want
/this/ -START-
/this/ -START-
My code
sed 's|^\([a-zA-Z]*\)-\s\([a-zA-Z]*\)$|/\1/ -\2-|' inputfile
Output
/this/ -START-
this- START
The first input works but the 2nd input with a huge amount of spaces does not. How can I deal with both of them using the same line of code?
sed uses POSIX Basic Regular Expressions, which are, like the name suggests, very basic, without a lot of the syntactical sugar or features of other RE packages you might be more used to. But they can still handle this:
$ cat input.txt
this- START
this- START
$ sed 's!^\([a-zA-Z]*\)-[[:space:]]\{1,\}\([a-zA-Z]*\)$!/\1/ -\2-!' input.txt
/this/ -START-
/this/ -START-
The key here is in the [[:space:]]\{1,\} portion: [:space:] inside a []character class matches any whitespace character, like \s in other RE implementations, and \{1,\} matches 1 or more of the preceeding atom, like + in pretty much every other flavor (Which also support this notation, though without needing the backslashes). So combined it matches 1 or more whitespace characters. And since regular expressions are greedy, it matches the longest sequence of whitespace characters instead of stopping after seeing just one.
If you only have spaces, not spaces and/or tabs between columns, it can be simplified to \{1,\} (Note the leading literal space; it's not obvious in rendered markdown). And you can use [[:alpha:]] instead of [a-zA-Z] to match all alphabetic characters. Makes a difference if matching non-English text. And you might want to use \{1,\} instead of * to avoid matching 0-length/missing columns if they can show up in your input.
Related
I want to replace a line, that represents a part of mathematical equation:
f(x,z,time,temp)=-(2.0)/(exp(128*((x-2.5*time)*(x-2.5*time)+(z-0.2)*(z-0.2))))+(
with a new one similar to the above. Both new and old lines are saved in bash variables.
Main problem is that mathematical equation is full with special characters that do not allow proper search and replace in bash mode, even when I used as delimiter special character that is not used in equation.
I used
sed -n "s|$OLD|$NEW|g" restart.k
and
sed -i "s|$OLD|$NEW|g" restart.k
but all times I get wrong results.
Any idea to solve this?
There is only * in your pattern here that is special for sed, so escape it and do replacement as usual:
sed "s:$(sed 's:[*]:\\&:g' <<<"$old"):$new:" infile
if there are more special characters in your real sample, then you will need to add them inside bracket []; there are some exceptions like:
if ^ character: it can be place anywhere in [] but not first character, because ^ character at first negates the characters within its bracket expression.
if ] character: it should be the first character, because this character is also used to end the bracket expression.
if - character: it should be the first or last character, because this character is also can be used for defining the range of characters too.
I'm working on a Linux terminal.
I have a string followed by a number as stdout and I need a command that replaces the middle of the string by the number and writes the result to stdout.
This is the string and number: librarian 16
and this is what the output should be: l16n
I have tried using echo librarian 16|sed s/[a-z]*/16/g and this gives me 9 999 the problems are that it replaces every letter separitaly and that it also replaces the first and last letter and that I can't make it use the number from stdout.
I have also tried using cut -c 1-1 , sed s/[^0-9]*//g and cut-c 9-9 to generate l, 16 and n respectively but I can't find how to combine their outputs into a single line.
Lastly I have tried using text editors to copy the number and paste it into the string but I haven't made much progress since I don't know how to use editors directly from the command line.
So what you want is to capture the first letter, the last letter and the number while ignoring the middle.
In regex we use ( and ) to tell the engine what we want to capture, anything else simply gets matched, or "eaten", but not captured. So the pattern should look like this:
([a-z])[a-z]*([a-z]) ([0-9]+)
([a-z]) to capture the first letter
[a-z]* to match zero or more characters but not capture. We choose "*" here because there might not be anything to match in the middle, like when there are two or less letters.
([a-z]) to capture the last letter.
to "eat" the whitespace.
([0-9]+) to capture the number. We use + instead of * because we require a number at this position.
sed uses a different syntax for some fo these constructs so we'll use the -E flag. You could do without it but you'd have to escape the ()+ characters which IMO makes pattern a little bit confusing.
Now, to retrieve the captured content, we have to use an engine-specific sequence of characters. sed uses \n where n is the number of the capturing group, so our final pattern should look like this:
\1\3\2
\1: First letter
\3: Number
\2: Last letter
Now we put everything together:
$ echo librarian 16|sed -r 's/([a-z])[a-z]*([a-z]) ([0-9]+)/\1\3\2/g'
l16n
I wanted to replace underscores with hyphens in all places where the character('_') is preceded and following by uppercase letters e.g. QWQW_IOIO, OP_FD_GF_JK, TRT_JKJ, etc. The replacement is needed throughout one document.
I tried to replace this in vim using:
:%s/[A-Z]_[A-Z]/[A-Z]-[A-Z]/g
But that resulted in QWQW_IOIO with QWQ[A-Z]-[A-Z]OIO :(
I tried using a sed command:
sed -i '/[A-Z]_[A-Z]/ s/_/-/g' ./file_name
This resulted in replacement over the whole line. e.g.
QWQW_IOIO variable may contain '_' or '-' line was replaced by
QWQW-IOIO variable may contain '-' or '-'
You had the right idea with your first vim approach. But you need to use a capturing group to remember what character was found in the [A-Z] section. Those are nicely explained here and under :h /\1. As a side note, I would recommend using \u instead of [A-Z], since it is both shorter and faster. That means the solution you want is:
:%s/\(\u\)_\(\u\)/\1-\2/g
Or, if you would like to use the magic setting to make it more readable:
:%s/\v(\u)_(\u)/\1-\2/g
Another option would be to limit the part of the search that gets replaced with the \zs and \ze atoms:
:%s/\u\zs_\ze\u/-/g
This is the shortest solution I'm aware of.
This should do what you want, assuming GNU sed.
sed -i -r -e 's/([A-Z]+)_([A-Z]+)/\1-\2/g' ./file_name
Explanation:
-r flag enables extended regex
[A-Z]+ is "one or more uppercase letters"
() groups a pattern together and creates a numbered memorized match
\1, \2 put those memorized matches in the replacement.
So basically this finds a chunk of uppercase letters followed by an underscore, followed by another chunk of uppercase letters, memorizes only the letter chunks as 2 groups,
([A-Z]+)_([A-Z]+)
Then it replays those groups, but with a hyphen in between instead of an underscore.
\1-\2
The g flag at the end says to do this even if the pattern shows up multiple times on one line.
Note that this falls apart a little in this case:
QWQW_IOIO_ABAB
Because it matches the first time, but not the second; the second part won't match because IOIO was consumed by the first match. So that would result in
QWQW-IOIO_ABAB
This version drops the + so it only matches one uppercase letter, and won't break in the same way:
sed -i -r -e 's/([A-Z])_([A-Z])/\1-\2/g'
It still has a small flaw, if you have a string like this:
A_B_C
Same issue as before, just one letter now instead of multiple.
I want to extract the first instance of a string per line in linux. I am currently trying grep but it yields all the instances per line. Below I want the strings (numbers and letters) after "tn="...but only the first set per line. The actual characters could be any combination of numbers or letters. And there is a space after them. There is also a space before the tn=
Given the following file:
hello my name is dog tn=12g3 fun 23k3 hello tn=1d3i9 cheese 234kd dks2 tn=6k4k ksk
1263 chairs are good tn=k38493kd cars run vroom it95958 tn=k22djd fair gold tn=293838 tounge
Desired output:
12g3
k38493
Here's one way you can do it if you have GNU grep, which (mostly) supports Perl Compatible Regular Expressions with -P. Also, the non-standard switch -o is used to only print the part matching the pattern, rather than the whole line:
grep -Po '^.*?tn=\K\S+' file
The pattern matches the start of the line ^, followed by any characters .*?, where the ? makes the match non-greedy. After the first match of tn=, \K "kills" the previous part so you're only left with the bit you're interested in: one or more non-space characters \S+.
As in Ed's answer, you may wish to add a space before tn to avoid accidentally matching something like footn=.... You might also prefer to use something like \w to match "word" characters (equivalent to [[:alnum:]_]).
Just split the input in tn=-separators and pick the second one. Then, split again to get everything up to the first space:
$ awk -F"tn=" '{split($2,a, " "); print a[1]}' file
12g3
k38493kd
$ awk 'match($0,/ tn=[[:alnum:]]+/) {print substr($0,RSTART+4,RLENGTH-4)}' file
12g3
k38493kd
I'm trying to write a grep (or egrep) command that will find and print any lines in "words.txt" which contain the same lower-case letter three times in a row. The three occurrences of the letter may appear consecutively (as in "mooo") or separated by one or more spaces (as in "x x x") but not separated by any other characters.
words.txt contains:
The monster said "grrr"!
He lived in an igloo only in the winter.
He looked like an aardvark.
Here's what I think the command should look like:
grep -E '\b[^ ]*[[:alpha:]]{3}[^ ]*\b' 'words.txt'
Although I know this is wrong, but I don't know enough of the syntax to figure it out. Using grep, could someone please help me?
Does this work for you?
grep '\([[:lower:]]\) *\1 *\1'
It takes a lowercase character [[:lower:]] and remembers it \( ... \). It than tries to match any number of spaces _* (0 included), the rememberd character \1, any number of spaces, the remembered character. And that's it.
You can try running it with --color=auto to see what parts of the input it matched.
Try this. Note that this will not match "mooo", as the word boundary (\b) occurs before the "m".
grep -E '\b([[:alpha:]]) *\1 *\1 *\b' words.txt
[:alpha:] is an expression of a character class. To use as a regex charset, it needs the extra brackets. You may have already known this, as it looks like you started to do it, but left the open bracket unclosed.