I have a requirement in Talend to read two columns from an xlsx file, but the problem is that one of the columns that I need is a measure whose value is supplied by another excel through a formula. So the Talend metadata is picking up the formula instead of the corresponding value. The Talend environment is hosted in Unix.
Is there any way to work around this without making any change in the input excel?
Any help would be appreciated.
The basic Talend components are fairly limited when it comes to dealing with Excel files.
I found it way better to use the components tFileExcel-Components by Jan Lolling : link to the latest version (30/01/2019).
One of the advantages of theses components over the classic Talend ones is that when reading a formula, the component will try to interpret it*.
*If the formula references another sheet or another file it won't work.
Looking around there are many examples on how use VBA to populate a listbox in Excel with the files found in a folder, filtering for files based on criteria.
My first question is it possible to filter files based on their advanced properties such as Category / Comments etc?
The second question is it possible to amend the advanced properties from within Excel using VBA without opening them?
I am not looking for someone to write the VBA (although I admit I may need some help in the future if I get stuck) but rather if the concept is feasible. What difficulties may be encountered or things to avoid etc.
Thanks
I have a series of PDF files uploaded to Google Drive (and also stored on my computer here) in different rows of a Google or Excel spreadsheet. Each row has a distinct PDF file linked to it. What I want to figure out is a way to extract a 5 row of data (not a table) from the PDF and add it to certain columns on the sheet:
Here's a sample pdf:
https://www.dropbox.com/s/2j7pqeja38jxmzc/Sample.pdf?dl=0
The sheet looks like this:
https://www.dropbox.com/s/40u1n7umacd74kw/Sample%20sheet.xlsx?dl=0
So the process will be like Excel open linked file in Row 1, extracts data needed, then adds the data to certain columns in Excel/Google spreadsheet.
I was just wondering if this is possible.. The PDF has lots of pages, but I only need data from a single page in it.
If this doesn't work in Excel/Google spreadsheet, any suggestion how I can automate this process?
PS: I'm not asking for the exact way to do it, because I know that's a violation here, just wanted to know if this is something possible and can be done in Excel or Google spreadsheet. If not, any suggestion will greatly help. Thanks!
Yes, it's possible, but it depends a lot on the PDF, which I imagine would be the biggest hurdle. You'll probably find this answer is at least relevant, if not exactly what you're looking for.
Otherwise, if everything is stored in Drive, it's just a question of:
1) Looping through the sheet and opening the doc you want.
2) Getting the content of the PDF (Probably as a string).
3) Finding a consistent way to cut the relevant data from the PDF (This depends a lot on the content of the PDFs).
4) Pasting the data to the sheet.
Number 3 might be your biggest challenge, but once you get started you might find it to be a lot easier then you'd think.
I'm considering replacing a (very) large body of Office-automation code with something that works with the Office XML format directly. I'm just starting out, but already I'm worried that it's too big a task.
I'll be dealing with Word, Excel and PowerPoint. So far I've only looked at Word and Excel. It looks like Word documents should be reasonably easy to manipulate, but Excel workbooks look like a nightmare. For example...
In Word, it looks like you could delete a paragraph simply by deleting the corresponding "w:p" tag. However, the supplied code snippet for deleting a row in Excel takes about 150 lines of code(!).
The reason the Excel code is so big is that deleting a row means updating the row indexes of all the subsequent rows, fixing up the "shared strings" table, etc. According to a comment at the top, the code snippet is not even complete, in that it won't deal with a workbook that has tables in it (I can live with that).
What I'm not clear on is whether that's the only restriction that the sample code has. For example, would there also be a problem if the workbook contained a Pivot Table? Or a chart that references data from the same sheet? Or some named ranges? Wouldn't you also have to update the formulae for any cells (etc.) that referenced a row whose row index had changed?
[That's not to mention the "calc chain", which (thankfully) I think you can simply delete since it's only a chache that can be re-built.]
And that's my question, woolly though it is. Just how hard do you have to work do something as simple as deleting a row properly? Is it an insurmountable task?
Also, if there are other, similar issues either with Excel or with Word or PowerPoint, I'd love to hear about them now, before I waste too much time going down a blind alley. Thanks.
Having worked with the Open XML SDK 2.0 for almost two years now I can say that doing seemingly trivial tasks can take many hours and sometimes days to figure out how to do it properly. For example, deleting an Excel row should be fairly straightforward and easy to do right? Nope because not only do you need code to delete your row, but then you have to update all the row indices, update any merged cell references, update hyperlink references, etc. Our internal delete method is close to 500 lines of code to just delete a row and I'm sure we don't have all the cases accounted for either.
The biggest complaint I have is the lack of documentation on how to do the most common tasks. The MSDN section on the Open XML SDK is very limited and whenever you need to do anything complicated you are really on your own. I've had to read the Open XML standard a lot to figure out what certain elements mean and how they should be implemented since I could find very little online.
The other challenging part is if you insert an element in a spot where it doesn't belong or put an invalid attribute on an element you will get a corrupt file when you try and open it. Most of the time you will not get any information on what caused the error and you will have to look at the Open XML standard spec to see what you did wrong.
If you need a fast turnaround time on converting that Office automation code into Open XML and what you are doing is not really basic, then I would say pass. If you have time and the patience to read up on the Word, Excel and PowerPoint XML structures and get familiar with how they relate then I say go for it. In my opinion it is really the only way to have very fine control over these office documents, but there will be a great learning curve when you start.
Oh and just for fun here is how much code is needed to add a comment to an Excel cell.
Just for completeness, here are some libraries I found for working with Excel XML:
www.extremexml.com - a layer on top of the Open XML SDK classes; focusses on injecting data into an existing spreadsheet; handles many of the cross-reference problems I identified in my question. Open source but GPL2 not LGPL. Code looks nice, and documentation is excellent. Does not appear terribly active on codeplex though.
Closed XML - another layer on top of the Open XML SDK - again open source, but with a less restrictive license (MIT). Looks nice, and looks more "active" than the above.
SpreadsheetLight - from what I can tell, a closed-source library sitting atop the Open XML SDK classes. Targeted more at those looking to create a spreadsheet from scratch rather than making changes to existing spreadsheets.
Here is another third party library dedicated to working with OpenXML:
http://www.officewriter.com
In the example cited by amurra above of deleting Excel spreadsheet rows, this is a single method call with this tool. It updates formulas and all the other references for which it seems that 500 lines of code would be required for otherwise.
The OpenXML SDK itself is a great tool for very simple things, but you still have to concern yourself with a lot of the internals of the file format and packaging structure to get things really right.
Here are some additional libraries that can manipulate with OOXML formats:
- GemBox.Spreadsheet (XLSX)
- GemBox.Document (DOCX)
Also GemBox published some articles that demonstrate how to manipulate with OOXML file format with pure .NET (without a use of any library), I think you'll find this interesting:
www.codeproject.com/Articles/15593/Read-and-write-Open-XML-files-MS-Office
(Introduction to SpreadsheetML format and an explanation on how we can read and write worksheet's cell content)
www.codeproject.com/Articles/649064/Show-Word-File-in-WPF
(Introduction to WordprocessingML format and demonstration on how we can read document's text)
This question is long winded because I have been updating the question over a very long time trying to get SSIS to properly export Excel data. I managed to solve this issue, although not correctly. Aside from someone providing a correct answer, the solution listed in this question is not terrible.
The only answer I found was to create a single row named range wide enough for my columns. In the named range put sample data and hide it. SSIS appends the data and reads metadata from the single row (that is close enough for it to drop stuff in it). The data takes the format of the hidden single row. This allows headers, etc.
WOW what a pain in the butt. It will take over 450 days of exports to recover the time lost. However, I still love SSIS and will continue to use it because it is still way better than Filemaker LOL. My next attempt will be doing the same thing in the report server.
Original question notes:
If you are in Sql Server Integrations Services designer and want to export data to an Excel file starting on something other than the first line, lets say the forth line, how do you specify this?
I tried going in to the Excel Destination of the Data Flow, changed the AccessMode to OpenRowSet from Variable, then set the variable to "YPlatters$A4:I20000" This fails saying it cannot find the sheet. The sheet is called YPlatters.
I thought you could specify (Sheet$)(Starting Cell):(Ending Cell)?
Update
Apparently in Excel you can select a set of cells and name them with the name box. This allows you to select the name instead of the sheet without the $ dollar sign. Oddly enough, whatever the range you specify, it appends the data to the next row after the range. Oddly, as you add data, it increases the named selection's row count.
Another odd thing is the data takes the format of the last line of the range specified. My header rows are bold. If I specify a range that ends with the header row, the data appends to the row below, and makes all the entries bold. if you specify one row lower, it puts a blank line between the header row and the data, but the data is not bold.
Another update
No matter what I try, SSIS samples the "first row" of the file and sets the metadata according to what it finds. However, if you have sample data that has a value of zero but is formatted as the first row, it treats that column as text and inserts numeric values with a single quote in front ('123.34). I also tried headers that do not reflect the data types of the columns. I tried changing the metadata of the Excel destination, but it always changes it back when I run the project, then fails saying it will truncate data. If I tell it to ignore errors, it imports everything except that column.
Several days of several hours a piece later...
Another update
I tried every combination. A mostly working example is to create the named range starting with the column headers. Format your column headers as you want the data to look as the data takes on this format. In my example, these exist from A4 to E4, which is my defined range. SSIS appends to the row after the defined range, so defining A4 to E68 appends the rows starting at A69. You define the Connection as having the first row contains the field names. It takes on the metadata of the header row, oddly, not the second row, and it guesses at the data type, not the formatted data type of the column, i.e., headers are text, so all my metadata is text. If your headers are bold, so is all of your data.
I even tried making a sample data row without success... I don't think anyone actually uses Excel with the default MS SSIS export.
If you could define the "insert range" (A5 to E5) with no header row and format those columns (currency, not bold, etc.) without it skipping a row in Excel, this would be very helpful. From what I gather, noone uses SSIS to export Excel without a third party connection manager.
Any ideas on how to set this up properly so that data is formatted correctly, i.e., the metadata read from Excel is proper to the real data, and formatting inherits from the first row of data, not the headers in Excel?
One last update (July 17, 2009)
I got this to work very well. One thing I added to Excel was the IMEX=1 in the Excel connection string: "Excel 8.0;HDR=Yes;IMEX=1". This forces Excel (I think) to look at all rows to see what kind of data is in it. Generally, this does not drop information, say for instance if you have a zip code then about 9 rows down you have a zip+4, Excel without this blanks that field entirely without error. With IMEX=1, it recognizes that Zip is actually a character field instead of numeric.
And of course, one more update (August 27, 2009)
The IMEX=1 will succeed importing data with missing contents in the first 8 rows, but it will fail exporting data where no data exists. So, have it on your import connection string, but not your export Excel connection string.
I have to say, after so much fiddling, it works pretty well.
P.S. If you are using a x64 bit version, make sure you call the DTExec from C:\Program Files\Microsoft SQL Server\90\DTS.x86\Binn. It will load the 32 bit Excel driver and work fine.
Would it be easier to create the Excel Workbook in a script task, then just pick it up later in the flow?
The engine part of SSIS is good but the integration with Excel is awful
"Using SSIS in conjunction with Excel is like having hot tar funnelled up your iHole in a road cone"
Dr. Zim, I believe you were the one that originally brought up this question. I totally feel your pain. I love SSIS overall, but I absolutely hate the limited tools that come standard for Excel. All I want to do is Bold the Heading or Row1 record in Excel, and not bold the following records. I have not found a great way to do that; granted I am approaching this with no script tasks or custom extensions, but you would think something this simple would be a standard option. Looks like I may be forced to research and program up something fancy for a task that should be so fundamental. I've already spent a rediculous amount of time on this myself. Does anyone know if you can use Excel XML with Excel versions: 2000/XP/2003? Thanks.
This is an old thread but what about using a flat file connection and writing the data out as a formatted html document. Set the mime type in the page header to "application/excel". When you send the document as an attachment and the recipient opens the attachment, it will open a browser session but should pop Excel up over the top of it with the data formatted according to the style (CSS) specified in the page.
Can you have SSIS write the data to an Excel sheet starting at A1, then create another sheet, formatted as you like, that refers to the other sheet at A1, but displays it as A4? That is, on the "pretty" sheet, A4 would refer to A1 on the SSIS sheet.
This would allow SSIS to do what it's good for (manipulate table-based data), but allow the Excel to be formatted or manipulated however you'd like.
When excel is the destination in SSIS, or the target export type in SSRS, you do not have much control over formatting and specifying how you want the final file to be. I have written a custom excel rendering engine for SSRS once, as my client was so strict about the format of final Excel report generated. I used 'Excel xml' to get the job done inside my custom renderer. May be you can use XML output and convert it to Excel XML using XSLT.
I understand you would rather not use a script component so perhaps you could create your own custom task using the code that a script contains so that others can use this in the future. Check here for an example.
If this seems feasible the solution I used was CarlosAg Excel Xml Writer Library. With this you can create code which is similar to using the Interop library but produces excel in xml format. This avoids using the Interop object which can sometimes lead to excel processes hanging around.
Instead of using a roundabout way to do this exercise of trying to write data to particular cell(s), format the cell(s), style them which is indeed a very tedius effort considering the support SSIS has for EXCEL, we could go the "template" way to do this.
assume we need to write data in the so & so cell with all the custom formating thats done on it. Have all the formatting in a sheet, say "SheetActual", Whereas the cells that will hold the data will actually have Lookups/ refrences/ Formulaes to refer to the original data that SSIS exports in a hidden sheet say "SheetMasterHidden" of the same Excel connection. This "SheetMasterHidden" will essentially hold the master data in default format that SSIS writes data to the excel. This way you need not worry about formatting the data runtime.
Formatting the Excel is a one time work "IF" the formatting dont change very often. If the format changes and the format is decided runtime this solution maynot go very well.
The answer is in the question. Over time, it became a progress status. However, there is SSRS that will create Excel files if you create TABLE presentations. It works pretty well too.