I am deploying an ARM template from azure DevOps using Azure PowerShell as shown below.
This is subscription level deployment. I am getting below error.
The term 'Get-AzSubscription' is not recognized as the name of a
cmdlet, function, script file, or operable program. Check the spelling
of the name, or if a path was included, verify that the path is
correct and try again.
Install-Module -Name Az -AllowClobber -Scope CurrentUser
Import-Module Az
$context = Get-AzSubscription -SubscriptionId xxxxxxxx
Set-AzContext $context
New-azdeployment -Name "SKL" -Location westeurope -TemplateFile .\delegatedResourceManagement.json -TemplateParameterFile .\delegatedResourceManagement.parameters.json
Logs:
##[section]Starting: Azure PowerShell script: InlineScript
==============================================================================
Task : Azure PowerShell
Description : Run a PowerShell script within an Azure environment
Version : 3.153.0
Author : Microsoft Corporation
Help : https://learn.microsoft.com/azure/devops/pipelines/tasks/deploy/azure-powershell
==============================================================================
##[command]Import-Module -Name C:\Modules\azurerm_6.7.0\AzureRM\6.7.0\AzureRM.psd1 -Global
##[command]Clear-AzureRmContext -Scope Process
##[command]Disable-AzureRmContextAutosave -ErrorAction Stop
##[command]Add-AzureRMAccount -ServicePrincipal -Tenant *** -Credential System.Management.Automation.PSCredential -Environment AzureCloud #processScope
##[command] Select-AzureRMSubscription -SubscriptionId xxxxxxx -TenantId ***
##[command]& 'd:\a\_temp\xxxxxxd.ps1'
##[warning]User declined to install module (Az).
##[error]The specified module 'Az' was not loaded because no valid module file was found in any module directory.
##[command]Disconnect-AzureRmAccount -Scope Process -ErrorAction Stop
##[command]Clear-AzureRmContext -Scope Process -ErrorAction Stop
##[error]The term 'Get-AzSubscription' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
##[section]Finishing: Azure PowerShell script: InlineScript
You need to specify the task version: 4.* (Preview) or higher to use the Az powershell module:
Also there is an Azure resource group deployment to deploy ARM template easily:
looks like too much confusion among all az modules, MSFT have messed up az new/old modules and are conflicting with each other. az account show will list all modules with AZ CLI
az account show
Search apps and Features - Uninstall the old April 2018 Azure
Follow something like this link https://blog.atwork.at/post/The-new-Azure-PowerShell-Az-module
Then you won't have issue with
Get-AzSubscription ( after using Connect)
Related
I have an Azure runbook where I am trying to deallocate VMs. When I run the runbook I get the error
Stop-AzureVM : No default subscription has been designated. Use Select-AzureSubscription -Default <subscriptionName> to
set the default subscription.
I have used the below in my script.
Add-AzureRmAccount
Select-AzureRMSubscription
After calling the select, it prints out
PSComputerName : localhost
PSSourceJobInstanceId :
Account :
Environment :
Subscription :
Tenant :
with the correct subscrption and tenant information so it seems the select is working correctly, but for some reason I still cannot use the Stop-AzureVM cmdlet.
Any ideas?
The command Stop-AzureVM is Azure Service Management PowerShell command. It just can be used to stop Azure classic VM. But the command Add-AzureRmAccount is Azure Resource Management PowerShell command. After running the command, we just can manage Azure Resource Management resources. For more details, please refer to here and here.
So with Azure ARM VM, please use the command Stop-AzureRmVM to stop it. Meanwhile, regarding how to stop Azure classic VM, please refer to the following steps
Create Azure Classic Run As Account
Script
$ConnectionAssetName = "AzureClassicRunAsConnection"
# Get the connection
$Conn = Get-AutomationConnection -Name $ConnectionAssetName
# Authenticate to Azure with certificate
$CertificateAssetName = $Conn.CertificateAssetName
$AzureCert = Get-AutomationCertificate -Name $CertificateAssetName
Set-AzureSubscription -SubscriptionName $Conn.SubscriptionName -SubscriptionId $Conn.SubscriptionID -Certificate $AzureCert
Select-AzureSubscription -SubscriptionId $Conn.SubscriptionID
#stop VM
Stop-AzureVM -ServiceName "ContosoService01" -Name "MyVM" -Force
Besides, regarding how to check if the VM is classic, please refer to the blog
Try Running the below :
Get-Module AzureRm.Profile -ListAvailable
This issue might occur when there is multiple instances of the module. If there are multiple instance remove the older modules and retain the new module.
To remove the old module : Uninstall-Module -Name AzureRm.Profile -RequiredVersion 4.6.0#(olderversion if you have any)
I have an Azure Automation Run As account. When I run the following code (from step 5 of Azure online tutorial) on the runbook in Azure Portal, I get the error shown below. Question: What I may be missing here, and how can we resolve the issue?
runbook code:
# Ensures you do not inherit an AzContext in your runbook
Disable-AzContextAutosave –Scope Process
$Conn = Get-AutomationConnection -Name AzureRunAsConnection
Connect-AzAccount -ServicePrincipal -Tenant $Conn.TenantID `
-ApplicationId $Conn.ApplicationID -CertificateThumbprint $Conn.CertificateThumbprint
$AzureContext = Select-AzSubscription -SubscriptionId $Conn.SubscriptionID
Error:
Failed At line:4 char:1
+ Disable-AzContextAutosave –Scope Process
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cannot find the 'Disable-AzContextAutosave' command. If this command is defined as a workflow, ensure it is defined before the workflow that calls it. If it is a command intended to run directly within Windows PowerShell (or is not available on this system), place it in an InlineScript: 'InlineScript { Disable-AzContextAutosave }'
I'm assuming you havn't imported the Az.Accounts module into your automation account. Disable-AzContextAutosave, Connect-AzAccount and Select-AzSubscription are from this module.
Follow this guide to Import Az modules.
Hi I am trying to teach myself Azure and I'm following this guide: https://learn.microsoft.com/en-us/learn/modules/intro-to-governance/2-azure-policy. I'm on a windows 10 with $PSVersionTable.PSEdition = Desktop I messaged Microsoft support, but no one has responded. When I try to run
# Register the resource provider if it's not already registered
Register-AzResourceProvider -ProviderNamespace 'Microsoft.PolicyInsights'
I get
Register-AzResourceProvider : The term 'Register-AzResourceProvider' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that
the path is correct and try again.
I've checked off having Azure powershell installed
if ($PSVersionTable.PSEdition -eq 'Desktop' -and (Get-Module -Name AzureRM -ListAvailable)) {
Write-Warning -Message ('Az module not installed. Having both the AzureRM and ' +
'Az modules installed at the same time is not supported.')
} else {
Install-Module -Name Az -AllowClobber -Scope CurrentUser
}
Any help with this would be greatly appreciated.
To solve the issue, try to follow the steps below.
1.Open a new powershell session via Run as administrator, then run the command below.
Install-Module -Name Az -AllowClobber -Scope AllUsers -Force
2.After installing the module, close the administrator session and open a new normal powershell session, then login your user account which has the permission to register the provider, e.g. Owner of the subscription.
Connect-AzAccount
3.Then register the provider.
Register-AzResourceProvider -ProviderNamespace 'Microsoft.PolicyInsights'
Note: If the issue is still existing, use Get-Module to check if the Az.Resources module was imported in this powershell session(normally it will be imported automatiocally), if not, you could use Import-Module -Name Az.Resources -Force to import it manually.
The command you are trying to use is not a PowerShell command. The command you are looking for should begin with either a Get- or Set- prefix.
I am trying to automate the process of an Azure Active Directory (AAD) app registration using Azure DevOps release pipeline but it fails to do so. (Please note that the same command (powershell commands as well as azure commands) works perfectly fine if I am running the same commands from my laptop) and for that I created an azure powershell task in the release pipeline and used the following line of code in the "inline script section":
I tried creating the AAD app registration using the following 2 methods:
1. "Azure Powershell script task"
2. Azure commands
Following is inline script that I used in case of azure powershell task:
Import-Module AzureRM
Import-Module AzureAD
# Register an AAD app
$appURI = "https://knaabdapp123.azurewebsites.net"
$appHomePageUrl = "https://knaabdapp123.knandan.in"
$appReplyURLs = #($appURI, $appHomePageURL, "https://localhost:12345")
New-AzureADApplication -DisplayName knaabdapp123 -IdentifierUris $appURI -Homepage $appHomePageUrl -ReplyUrls $appReplyURLs
I get the following error when I do so:
2019-08-09T11:27:31.1039145Z ##[section]Starting: Azure PowerShell script: Register an AAD app and generate credential for the same
2019-08-09T11:27:31.1162119Z ==============================================================================
2019-08-09T11:27:31.1162226Z Task : Azure PowerShell
2019-08-09T11:27:31.1162310Z Description : Run a PowerShell script within an Azure environment
2019-08-09T11:27:31.1162378Z Version : 2.153.1
2019-08-09T11:27:31.1162446Z Author : Microsoft Corporation
2019-08-09T11:27:31.1162520Z Help : https://learn.microsoft.com/azure/devops/pipelines/tasks/deploy/azure-powershell
2019-08-09T11:27:31.1162620Z ==============================================================================
2019-08-09T11:27:37.0179906Z ##[command]Import-Module -Name C:\Modules\AzureRm_5.1.1\AzureRM\5.1.1\AzureRM.psd1 -Global
2019-08-09T11:28:10.7554409Z ##[command]Clear-AzureRmContext -Scope Process
2019-08-09T11:28:11.2755157Z ##[command]Disable-AzureRmContextAutosave -ErrorAction Stop
2019-08-09T11:28:15.0230853Z ##[command]Add-AzureRMAccount -ServicePrincipal -Tenant *** -Credential System.Management.Automation.PSCredential -Environment AzureCloud #processScope
2019-08-09T11:28:16.5226685Z ##[command] Select-AzureRMSubscription -SubscriptionId a*******-ae1c-****-****-********** -TenantId ***
2019-08-09T11:28:16.8648715Z ##[command]& 'C:\Users\VssAdministrator\AppData\Local\Temp\2a55****-67c6-****-8f80-**********.ps1'
2019-08-09T11:28:17.0308219Z ##[error]The specified module 'AzureAD' was not loaded because no valid module file was found in any module directory.
2019-08-09T11:28:19.0607544Z ##[command]Remove-AzureRmAccount -Scope Process -ErrorAction Stop
2019-08-09T11:28:19.4371114Z ##[command]Clear-AzureRmContext -Scope Process -ErrorAction Stop
2019-08-09T11:28:19.8885329Z ##[error]The term 'New-AzureADApplication' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
I also used the Azure CLI task and used the following script, but that fails too:
az ad app create --display-name MyApplication123 --homepage "https://myapplication1232.nl" --reply-urls "https://localhost:12345" --identifier-uris "https://myapplication2.azurewebsites.net"
I get the following error in this case:
>az ad app create --display-name MyApplication123 --homepage "https://myapplication1232.nl" --reply-urls "https://localhost:12345" --identifier-uris "https://myapplication2.azurewebsites.net"
2019-08-09T11:47:46.5676945Z ERROR: Insufficient privileges to complete the operation.
2019-08-09T11:47:46.6721317Z ##[error]Script failed with error: Error: d:\a\_temp\azureclitaskscript1565351201021.bat failed with return code: 1
So, I have 2 questions:
Is it possible to create an AAD app registration using "Azure powershell" task script or "Azure CLI" task in Azure DevOps?
If yes, then what may I be doing wrong?
Is it possible to create an AAD app registration using "Azure
powershell" task script or "Azure CLI" task in Azure DevOps?
For this question, the answer is Yes, of course you can.
The cause of the error you received in Azure Powershell task is as default, the AzureAD powershell cmdlets will not be installed in agent.So, if you try to using this module directly, you will receive the message like "##[error]The specified module 'AzureAD' was not loaded because no valid module file was found in any module directory."
If yes, then what may I be doing wrong?
To solve this error message, please try with replacing your script Import-Module AzureAD as the follow script to use a correct way to get the AzureAD module.
$AzureADModulePath = $PSScriptRoot + "\AzureAD\2.0.1.16\AzureAD.psd1"
Import-Module $azureAdModulePath
This is the detailed info about AzureAD module in Powershell Gallery. And also, here has a blog you can refer.
Updated:
You must install AzureAD cmdlets module from the PowerShell gallery with the below script first:
Install-Module -Name AzureAD -RequiredVersion 2.0.1.16
Note: If get error like Install-Module : Administrator rights are required to install modules while you install with this script, please add -scope CurrentUser to the install script. It will running the script as administrator role.
And then, import the module from the installed path afterwards.
I have created some Azure VMs using the new Resource Manager and i'd like to stop them everyday.
To do so, i've published a runbook to stop aboth classic and ARM VMs, and i created a scheduler which runs the runbook every night :
workflow Stop-AzureVMs
{
$cred = Get-AutomationPSCredential -Name 'Cred'
Add-AzureAccount -Credential $cred
Select-AzureSubscription -Current 'SubscriptionName'
Get-AzureVM | Stop-AzureVM –Force
Get-AzureRmVM | Stop-AzureRmVM -Force
}
I have imported the AzureResourceManager module to my Azure Automation account :
But i am getting this error :
Exception
At line:34 char:2
+ Get-AzureRMVM | Stop-AzureRMVM -Force
+ ~~~~~~~~~~~~~ Cannot find the 'Get-AzureRMVM' command. If this command is defined as a workflow, ensure it is defined before the workflow that calls it. If it is a command intended to run directly within Windows PowerShell (or is not available on this system), place it in an InlineScript: 'InlineScript { Get-AzureRMVM }'
How is that possible ?
Edit : Below is the solution
$cred = Get-AutomationPSCredential -Name 'Cred'
Add-AzureRmAccount -Credential $cred
Select-AzureRmSubscription -Name 'SubscriptionName' -SubscipritionId 'SubscriptionId'
Get-AzureRmVM | Stop-AzureRmVM -Force
All workflows i found didn't mention the use of Add-AzureRmAccount and Select-AzureRmSubcription instead of the standard Add-AzureAccount and Select-AzureSubscription. I thought that the authentication process to our Azure account was the same.
Update : It is now possible to combine both ASM and ARM cmdlets within the same runbooks, see this post for more informations about ARM supported by default on Azure Automation
Looks like you imported the old version of the ARM cmdlets (before Azure PS 1.0) into Azure Automation. This was before the *-AzureRm* renaming. So tt should be Stop-AzureVM not Stop-AzureRmVM.
However, that makes it ambiguous as to whether you are trying to call Azure Service Management or Azure Resource Manager cmdlets -- which is exactly why the cmdlet names were renamed in Azure PS 1.0. I recommend you follow the guidance here.
As per my understanding ASM mode is default. If you are going for ARM command firstly switch mode is required using Switch-AzureMode
One more confusion is what is the purpose of Get-AzureRMVM command. I googled but coulndn't find anything -
The Get-AzureRMVM cmdlet is in the AzureRM.Compute module... The AzureRM* cmdlets are still in preview, I don't think they are available in Azure Automation yet.
The two modules in your screenshot above likely correspond to the 0.9.x version of the cmdlets and there were indeed two different modules (Azure=ASM and AzureResourceManager=ARM) behind Switch-AzureMode. Switch-AzureMode just unloads one and loads the other.
If Automation is still using the 0.9.x version of the cmdlets then you should be able to just use Get-AzureVM for ARM VMs using the AzureResourceManager module.
Below is the solution
$cred = Get-AutomationPSCredential -Name 'Cred'
Add-AzureRmAccount -Credential $cred
Select-AzureRmSubscription -Name 'SubscriptionName' -SubscriptionId 'SubscriptionId'
Get-AzureRmVM | Stop-AzureRmVM -Force
It is not yet possible to combine ARM and ASM cmdlets in same runbook apparently ... So you have to use only ARM cmdlet or ASM cmdlet.
Also, all workflows i found didn't mention the use of Add-AzureRmAccount and Select-AzureRmSubcription instead of the standard Add-AzureAccount and Select-AzureSubscription.
I thought that the authentication process to our Azure account was the same.
The Following code will work for both old style and new Style VM's but be aware this will shut down all machines with no warning.
{
# TODO: update to the name of the credential asset in your Automation account
$AutomationCredentialAssetName = "AzureAutomationRG"
# Get the credential asset with access to my Azure subscription
$Cred = Get-AutomationPSCredential -Name $AutomationCredentialAssetName
# Authenticate to Azure Service Management and Azure Resource Manager
Add-AzureAccount -Credential $Cred
Add-AzureRmAccount -Credential $Cred
"`n-Old Style VMS-`n"
# Get and output Azure classic VMs
$VMs = Get-AzureVM
$VMs.Name
Get-AzureVM | Stop-AzureVM -Force
"`n-New Style Resource Group VMs-`n"
# Get and output Azure v2 VMs
$VMsv2 = Get-AzureRmVM
$VMsv2.Name
Get-AzureRmVM | Stop-AzureRmVM -Force
}
For new Azure RM VMs use access extensions the following command:
Set-AzureRmVMAccessExtension -ResourceGroupName "ResourceGroupName" -VMName "VMName" -Username "Admin User Name" -Password "Admin Password" -Name "Extension Name"
Please note the -Name parameter is the arbitrary extension name.
This might be late to the party, but I would recommend you check out this link:
https://www.attosol.com/start-or-stop-all-vms-of-a-resource-group-in-azure/
Basically, you can create a script and write some aliases with switches to make your job super easy.