I have two DAC's POReceipt, and and POReceiptLine. POReceiptLine containts a field called MfrPartNbr.
I want the user to be able to lookup all the POReceipts where the POReceiptLine.MfrPartNbr is equal to an entered value.
The SQL would be
SELECT *
FROM dbo.POReceipt
WHERE POReceipt.ReceiptNbr IN
(
SELECT ReceiptNbr
FROM dbo.POReceiptLine
WHERE MfrPartNbr = 'MY_ENTERED_PART_NBR'
)
Any idea how to write the BQL Statement for this?
As stated, an inner join won't work in this case because you will receive the same POReceipt multiple times (once for each POReceiptLine). The following BQL query shows how you can get the desired results using a sub query. If mfrPartNbr is an extension field, then replace POReceiptLine.mfrPartNbr with the correct extension name (e.g. POReceiptLineExtension.mfrPartNbr).
PXSelect<POReceipt, Where<Exists<
Select<POReceiptLine,
Where<POReceiptLine.receiptNbr, Equal<POReceipt.receiptNbr>,
And<POReceiptLine.mfrPartNbr, Equal<Required<POReceiptLine.mfrPartNbr>>>>>>>>.Select(this, "MY_ENTERED_PART_NBR");
Related
I am trying to create a formula to obtain a list of items that have no open transactions.
I cant just filter out by status as this filters out transactions that are open, as opposed to showing me only items with nothing open.
So basically if an item has anything open then i dont want it on the search. I do need it on the search if it has all closed or it has no transactions at all.
Hoping someone can help put me in the right direction.
I am a little bit stuck at where to start with the formulas and tried a case formula.
You can use item saved search adding under criteria as "Transaction Fields-status-anyOf-select all closed/rejected/declined statuses" not in filter reason of saved search.
Thanks.
To get the value of non transaction items as well, You need to check the check box use expression under criteria in standard subtab use parens() with OR expression.
And add one more condition as "Transaction Fields-Internal Id-anyOf-none with
"Transaction Fields-status-anyOf-select all closed/rejected/declined statuses".
Add both condition with OR logic.
It will work for both items condition if it has transaction status with closed or with none of transaction internal ids.
Thanks.
I think this is possible in a saved search, and requires a change in the way the filtering is done. Rather than filtering on the "Filters", using grouping and summary calculations to determine if an item qualifies, basically :
Create the item saved search as you would normally, but don't include a "Standard" filter for the openness of the transaction.
In the results, group by item name (or internalid), and another fields you want to include in the top-level results.
In the Criteria - Summary list, add a Formula (Number) condition :
Summary Type= Sum (Count won't work here)
Formula = case when {transaction.status} = 'Open' then 1 else 0 end
Equal to 0
Whether this is more or less elegant than bknight's answer is debatable.
I don't think this is the sort of thing you can do with a single saved search.
It would be fairly easy to do with SuiteQL though.
The script below runs in the console and finds items that are not on any Pending Billing Sales Orders. It's adapted from a script with a different purpose but illustrates the concept.
You can get a list of the status values to use by creating a saved search that finds all the transactions with open statuses you want to exclude , take note of that saved search's id and running the second script in the console
require(['N/query'], query => {
const sqlStr = `
select item.id, itemid, count(po.tranid) as po, count(bill.tranId) as bill, max(bill.tranDate) as lastBilled, count(sale.tranId) as sales, count(tran.tranId) as trans
from item
left outer join transactionLine as line
on line.item = item.id
left outer join transaction as tran on line.transaction = tran.id
left outer join transaction as po on line.transaction = po.id and po.type = 'PurchOrd'
left outer join transaction as bill on line.transaction = bill.id and bill.type = 'VendBill'
left outer join transaction as sale on line.transaction = sale.id and sale.type in ('CustInvc', 'CashSale')
where item.id not in (select otl.item from transactionLine otl, transaction ot where
otl.transaction = ot.id and ot.status in ('SalesOrd:F'))
group by item.id, item.itemid
`;
console.log(sqlStr);
console.log(query.runSuiteQL({
query: sqlStr
}).asMappedResults().map((r, idx)=>{
if(!idx) console.log(JSON.stringify(r));
return `${r.id}\t${r.itemid}\t${r.po}\t${r.bill}\t${r.lastBilled}\t${r.sales}\t${r.trans}`;
}).join('\n'));
});
require(['N/search'], search=>{
const filters = search.load({id:304}).filters;
console.log(JSON.stringify(filters.find(f=>f.name == 'status'), null, ' '));
});
In terms of doing something with this you could run this in a saved search and email someone the results, show the results in a workbook in SuiteAnalytics or build a portlet to display the results - for this last Tim Dietrich has a nice write up on portlets and SuiteQL
Working on Azure Cognitive Search with backend as MS SQL table, have some scenarios where need help to define a query.
Sample table structure and data :
Scenarios 1 : Need to define a query which will return data based on category.
I have tied query using search.ismatch but its uses prefix search and matches other categories as well with similar kind of values i.e. "Embedded" and "Embedded Vision"
$filter=Region eq 'AA' and search.ismatch('Embedded*','Category')
https://{AZ_RESOURCE_NAME}.search.windows.net/indexes/{INDEX_NAME}/docs?api-version=2020-06-30-Preview&$count=true&$filter=Region eq 'AA' and search.ismatch('Embedded*','Category')
And it will response with below result, where it include "Embedded" and "Embedded Vision" both categories.
But my expectation is to fetch data only if it match "Embedded" category, as highlighted below
Scenario 2: For the above Scenario 1, Need little enhancement to find records with multiple category
For example if I pass multiple categories (i.e. "Embedded" , "Automation") need below highlighted output
you'll need to use a different analyzer which will break the tokens on every ';' just for the category field rather than 'whitespaces'.
You should first ensure your Category data is populated as a Collection(Edm.String) in the index. See Supported Data Types in the official documentation. Each of your semicolon-separated values should be separate values in the collection, in a property called Category (or similar).
You can then filter by string values in the collection. See rules for filtering string collections. Assuming that your index contains a string collection field called Category, you can filter by categories containing Embedded like this:
Category/any(c: c eq 'Embedded')
You can filter by multiple values like this:
Category/any(c: search.in(c, 'Embedded, Automation'))
Start with clean data in your index using proper types for the data you have. This allows you to implement proper facets and you can utilize the syntax made specifically for this. Trying to work around this with wildcards is a hack that should be avoided.
To solve above mention problem used a below SQL function which will convert category to a json string array supported by Collection(Edm.String) data type in Azure Search.
Sql Function
CREATE FUNCTION dbo.GetCategoryAsArray
(
#ID VARCHAR(20)
)
RETURNS NVARCHAR(MAX)
AS
BEGIN
DECLARE #result NVARCHAR(MAX) = ''
SET #result = REPLACE(
STUFF(
(SELECT
','''+ TRIM(Value) + ''''
FROM dbo.TABLEA p
CROSS APPLY STRING_SPLIT (Category, ';')
WHERE p.ID = #ID
FOR XML PATH('')
),1,1,''),'&','&')
RETURN '[' + #result + ']'
END
GO
View to use function and return desired data
CREATE View dbo.TABLEA_VIEW AS
select
id
,dbo. GetCategoryAsArray(id) as CategoryArr
,type
,region
,Category
from dbo.TABLEA
Defined a new Azure Search Index using above SQL View as data source and during Index column mapping defined CategoryArr column as Collection(Edm.String) data type
Query to use to achieve expected output from Azure Search
$filter=Region eq 'AA' and CategoryArr/any(c: search.in(c, 'Embedded, Automation'))
I have Profile table with a huge number of rows. I was trying to filter out profiles based on super_category and account_id (these are the fields in the model Profile).
Assume I have a list of ids in the form of bulk_account_ids and super_categories
list_of_ids = Profile.objects.filter(account_id__in=bulk_account_ids, super_category__in=super_categories).values_list('id', flat=True))
list_of_ids = list(list_of_ids)
SomeTask.delay(ids=list_of_ids)
This particular query is timing out while it gets evaluated in the second line.
Can I use .iterator() at the end of the query to optimize this?
i.e list(list_of_ids.iterator()), if not what else I can do?
I have a nested field named items.productName wherein I want to check if the product name contains a particular string.
SELECT * FROM test WHERE hasAny(items.productName,['Samsung'])
This works only when the product name is Samsung.
I have tried array join
SELECT
*
FROM test
ARRAY JOIN items
WHERE items.productName LIKE '%Samsung%'
This works but it is very slow (~1 sec for 5 million records)
Is there a way to perform like within hasAny?
You can achieve this using arrayFilter function. ClickHouse docs
Query
Select * from test where arrayFilter(x -> x LIKE '%Samsung%', items.productName) != []
If you do not use != [] then you will get an error "DB::Exception: Illegal type Array(String) of column for filter. Must be UInt8 or Nullable(UInt8) or Const variants of them."
OK Here we go.
Using Kentico 11/Portal Engine (no hot fixes)
Have a table that holds Content only page Types. One field of importance is a Date and time field.
I am trying to get rows out of this table that match a certain month and year criteria. For instance give me all records where Month=2 and Year=2018. These argument will be passed via the query string
I have a custom Stored proc that I would like to receive two int(or string) arguments then return a collection of all matching rows.
I am using a RepeaterWithCustomQuery to call the procedure and handle the resulting rows. As you can see below the querystring arguments are named "year" and "monthnumber".
The Query
Me.PR.PREDetailSelect
When my Webpart is set up in this configuration I get the following error:
In my Query, I have tried:
EXEC Proc_Custom_PRDetails #MonthNumber = ##ORDERBY##; #Year = ##WHERE##<br/>
EXEC Proc_Custom_PRDetails #MonthNumber = ##ORDERBY##, #Year = ##WHERE##<br/>
EXEC Proc_Custom_PRDetails #MonthNumber = ##ORDERBY## #Year = ##WHERE##<br/>
Any help would be appreciated (Thanks in advance Brendan). Lastly, don't get too caught up in the names of specific objects as I tried to change names to protect the innocent.
Those macros for queries are not meant to be used with stor procs. The system generates this false condition 1=1 in case if you don't pass anything so it won't break the sql statement like the one below:
SELECT ##TOPN## ##COLUMNS##
FROM View_CMS_Tree_Joined AS V
INNER JOIN CONTENT_MenuItem AS C
ON V.DocumentForeignKeyValue = C.MenuItemID AND V.ClassName = N'CMS.MenuItem'
WHERE ##WHERE##
ORDER BY ##ORDERBY##
You need to convert you stor proc to SQL statement then you can use these SQL macros or use stor proc without parameters
If look at the query above top and where are not good because system will do adjustment, but you can use order by and columns, but they both must be present (I think it passes them as is):
exec proc_test ##ORDERBY##, ##COLUMNS##
Honestly I would advice against doing this, plus you won't gain much by calling stor proc.