I was able to install xgboost on my mac and have it so that I can import the module without any errors. However I cannot use it. When I try to import XGBRegressor. I get the following error :
cannot import name 'XGBRegressor' from 'xgboost' (unknown location).
Some of the support for this type of problem says that there may be more than one xgboost location, and that python is selecting the incorrect xgboost, however I have not been able to find how to fix this problem.
When I print the xgboost.__file__ location, it returns 'None'. However I know its in the site-packages folder in my python path.
I have python 3.9
Maybe this.
conda install -c conda-forge xgboost=0.6a2
Then, restart Spyder and re-run!
I wrote following codes on a new google collabs notebook:
!pip install --quiet --upgrade tensorflow-federated-nightly
import tensorflow as tf
import tensorflow_federated as tff
And I got these error messages while importing tensorflow_federeated:
/usr/local/lib/python3.7/dist-packages/keras/api/_v1/keras/experimental/__init__.py in <module>()
8 from keras.feature_column.sequence_feature_column import SequenceFeatures
9 from keras.layers.rnn.lstm_v1 import PeepholeLSTMCell
---> 10 from keras.optimizers.learning_rate_schedule import CosineDecay
11 from keras.optimizers.learning_rate_schedule import CosineDecayRestarts
12 from keras.premade_models.linear import LinearModel
ModuleNotFoundError: No module named 'keras.optimizers.learning_rate_schedule'; 'keras.optimizers' is not a package
These errors seem to be spawning from the modules installed on the colabs itself, instead of my code.
Any idea on what can be done to fix this?
Collab Defaults to 3.7 according to a similar problem But although the solution to upgrade to 3.9 did indeed upgrade to python 3.9, TFF still didn't work for me, even when I installed locally. So, find a different path.
I'm relatively new to python, so please excuse my ignorance on what could be a very easy fix. I am running python 3.6 through the Rodeo IDE, and it has been great, as it is similar to R-Studio (which I am very familiar with). As an aspiring data scientist, I am trying to learn how to fit regression and time series models to data, and all of the tutorials that I have found all say that I need various packages, all of which should be included in the Anaconda library. After downloading and re-downloading Python, Rodeo, and Anaconda, and trying various online fixes, I have been unable to successfully load the scikit-learn and the statsmodels modules.
#here is everything I have tried.
#using pip
! pip install 'statsmodels'
! pip install 'scikit-learn'
! pip install 'sklearn'
I don't get any errors here, and to be honest I'm kind of confused as to what this actually does, but I have seen many people online always suggest that this is a big problem when trying to import modules.
#using import
import sklearn
import statsmodels
from sklearn import datasets
import statsmodels.api as sm
all of the above give me the same error:
import statsmodels.api as sm
ImportError: No module named 'statsmodels'
ImportError: Traceback (most recent call last)
ipython-input-184-6030a6549dc0 in module()
----> 1 import statsmodels.api as sm
ImportError: No module named 'statsmodels'
I have tried to set my working directory to the Anaconda 3 file that has all of the packages and rerunning the above code with no success.
I'm thinking that the most likely problem has to do with my inexperience, and it is probably a simple fix. Is it possible that the IDE is bad or anaconda just doesn't like me?
So keeping all of the above in mind, the question is, how can I import these modules successfully so that I can access their functionality?
Option 1:
After installing packages with pip, try closing and reopening your IDE/Jupyter Notebook and try again.
This is a known bug that Jake VanderPlas outlined here
Option 2:
Don't put quotations around your pip messages.
!pip install -U statsmodels
!pip install scikit-learn
Option 3:
Also are you using Anaconda? If you are, you should already have scikit-learn. If you are trying inside Rodeo, I think you need to set your path inside Rodeo. Open Rodeo and set the Python Path to your fresh anaconda. See here
So I trying to install and run from MSFT the cntk, you know, just for fun. Anyway, I keep getting this error which says:
import numpy as np
ModuleNotFoundError: No module named 'numpy'
Now I have looked around here a little and I found a post saying that I needed to install the latest version of NumPy, but when I go to do that, I get back this:
Requirement already satisfied: NumPy in c:\users\username\appdata\local\continuum\anaconda3\envs\cntk-py34\lib\site-packages
SO I really have no idea what is going on here.
Anyway, thanks in advance.
Is your IDE linked to Anaconda env? If you open up the Anaconda prompt and import numpy do you get the same error?
You probably have an environment outside of Anaconda which does not have numpy installed.
In my case, I was executing [filename].py from the Anaconda prompt as I would a batch file and was getting this error. I confirmed numpy was install by executing pip list.
Funning python and passing the script file name as an argument, eg python [filename].py, correctly imported the numpy module and executed the script without error.
Happy October everyone,
I've successfully downloaded modules before using either the pycharm installer or pip through the command screen, but for some reason when installing matplotlib pycharm cannot recognize it. I've uninstalled and reinstalled, I've installed through both methods, I've followed past similar questions asked on this site which make sure that you have the same interpreter and that it was installed in the right folder (pycharm error while importing, even though it works in the terminal).
So, here's the whole problem. Here's is the simple code, submitted into both pycharm and IDLE:
import matplotlib.pyplot as plt
plt.plot([1,2,3],[2,1,3])
plt.show()
When submitted into IDLE, my plot appears. When submitted into pycharm, the following error appears:
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "C:/PythonProject/matplotlib.py", line 1, in <module>
import matplotlib.pyplot as plt
File "C:\PythonProject\matplotlib.py", line 1, in <module>
import matplotlib.pyplot as plt
ImportError: No module named 'matplotlib.pyplot'; 'matplotlib' is not a package
I am currently running Python 3.4, PyCharm 2016.2.3, and my matplotlib folders are indeed in my site-packages folder inside my Python34 folder. Also for further verification:
PyCharm installation
Please help I've become frustrated since this is the only module I've run into trouble with. I've scoured StackOverflow and related websites to help, I've made sure I have all the requirements, etc.
I guess if you named your current writing python module as matplotlib.py.That cause the python load your current writing module instead of the actual matplotlib.py, which triggers an error.
I recommend you to use virtualenv. Is not strictly necessary but is good for dividing your project environments.
This is how I tested matplotlib on my Windows 10 installation, hope it helps.
Be sure that you have the python 3 installation folder listed in your Windows PATH environment variable, should be already listed if you checked "Add Python 3.5 to PATH":
You need also to set the Scripts folder in your PATH environment variable usually should be this path:
C:\Users\<your username>\AppData\Local\Programs\Python\Python35\Scripts
If you don't do that you have to prepend python -m to every command below like this: python -m <command>, so the command below would be python -m pip install virtualenv. I prefer the first solution.
To test matplotlib on Pycharm I've used virtualenv, here is how; first install virtualenv:
pip install virtualenv
Then you create your virtual environment in a folder of your choice, in my case I used python_3_env_00:
virtualenv python_3_env_00
After that you can activate you python 3 virtual environment:
python_3_env_00/Scripts/activate.bat
Now you should see in your command line the active virtual environment (python_3_venv_00), like this:
Now you can install matplotlib:
pip install matplotlib
Fire up PyCharm and add your virtual environment as you project interpreter, go to File->Settings search for Project Interpreter click on the gear icon and Add Local and set the path of your virtual environment, should look like something like this:
Test it:
import sys
print(sys.path)
run this code in where the import worked, and run it in the Pycharm project. Compare the lists. Find out which path that is not present in Pycharm sys.path.
Before importing pyplot, append the missing path to sys.path.
import sys
sys.path.append("the path")
import matplotlib.pyplot as plt
Does this work?
Please follow below steps if you are still getting an error:
If you are using PyCharm, it automatically create virtualenv.
Ensure Scripts path is set into PATH
C:\Users\<Username>\AppData\Local\Programs\Python\Python37-32
Then open PyCharm and go to File-> settings. Search for Project Interpreter. You will see window like this
sample image
Click on setting icon -> Existing Environment -> click on ... give below path
C:\Users\Krunal\AppData\Local\Programs\Python\Python37-32\python.exe
Click on Apply -> ok and you are good to go.
After installing matplotlib When I was trying to use matplotlib.pyplot it was giving error module not found.
I browsed some white papers and found out that we also need to install scipy library to use the matplotlib so I used the below in my command prompt
python -mpip install scipy
Restarted my kernel session.
It worked!!!
I was also facing issue while importing matplotlib but it got resolved and now I am able to use it from pycharm as well.
Please make sure you should have visual c++ 14 installed in your system.
2.If you have more than two python version installed on your system then please install matplotlib from both the version.
Eg. pip install matplotlib
pip3 install matplotlib
If matplotlib is working from python idle then please check whether you are using correct interpreter in pycharm or not and try to choose pythonw.exe path from your installed location.
Hope this will help, Please do let me know if you are still facing issue.
I had similar issue but I solved it very easily on pycharm 2019.3.2. In case anyone looking for an easier solution:
I just opened the terminal window on pycharm and typed pip install matplotlib and it was all good to go. Every project has its own virtual environment. Opening terminal window of IDE cds to project directory by default. So the installing command was enough.