I'm new to this terraform world and I've been assigned into the task of creating many configurations to azure with it.
I'm developing a main.tf script (which creates some resources, like resource group, vnets, kubernetes cluster, app services, etc.) and while coding it and executing
Terraform apply, it seems to only apply what changed doing in fact updates.
Then we deleted the resource group the script created and a colegue of mine had to run the same script with terraform creating a resource group with another name since i didn't had a required permission, after that, if i run the command Terraform apply it fails and gives errors, that say that the resource cannot be created because it already exists.
After reading some documentation i found that it might be because of the state
https://www.terraform.io/docs/state/index.html
Is the update of a script something that only works for each session of terraform?
Even doing a Terraform refresh doesn't seem to work.
Or probably I'm just mistaking and there is no way to update some resources.
EDIT: for some reason the state file that was on the storage only had a few things, the solution was to delete everything and create again.
For the new resources, there is nothing more, the Terraform script helps you create the resources you set in the script.
For the existing resources, when you make changes in the script that you already deployed via the Terraform, then it will check the state file to make sure what changes the resources should update. If there is no state file ( or you delete it), then it will deploy the Terraform script directly, but if any resources you want to deploy already exists, then it will fail due to the existing resources. And the command terraform refresh just updates the last state of the resources in the Terraform script that you already deployed. If the deployment failed and the state file has no resources in it, then refresh is not useful.
If someone else ran terraform apply for you because you didn't have access, and now you want to modify that terraform and run it yourself, you need to get the state file that was generated when that other person ran it. You absolutely have to maintain the Terraform state file somewhere, so that it can be accessed on subsequent runs. You should really configure a Terraform backend, instead of using local state files.
You need to be aware that Terraform stores everything it does in the state file, and refers to that file before every run. A terraform refresh only tells Terraform to refresh the state of the things that are in the state file, it doesn't rebuild the state file from scratch. Understanding Terraform state files is so fundamental to the use of Terraform that you really need to understand this before using it.
I am trying to find my way in terraform , i am going through the documentation and got confused about what is exactly will happen if a resource has been deleted manually from the configuration file then we ran the apply command on the modified configuration file please ?
my understanding that the state file will still have the deleted resource as well it will still be actually running on the cloud platform so terraform apply will not perform any action, but i am not sure.
Appreciate if you help to clear my understanding please
Also another relevant point please what if a resource was changed manually from the cloud console for example and we tried to do any action from terraform on that resouces , what will happen ?
Thanks a lot ,
First, some background from the documentation at https://www.terraform.io/intro/index.html
Terraform generates an execution plan describing what it will do to reach the desired state, and then executes it to build the described infrastructure. As the configuration changes, Terraform is able to determine what changed and create incremental execution plans which can be applied.
The state mentioned gets saved when resources are modified. When you add a resource, it will get created and the state will be updated to reflect this. The same is for removing of resources. When you remove a resource in Terraform by deleting the code or template file, the resource will be removed and state updated to to reflect the removed resource (emphasis mine to illustrate the answer).
The second question of changing resources that drift from the state is a little more involved. When you create a plan against a resource that may have change, the provider will usually refresh the resources in state to compare them and show you what the changes to be made will be (ie. trying to change the resource to the declared state in the code).
I am new to terraform and have been playing with it for a while. In the scenario I am trying to execute, I am trying to create a stack for each deployment of mine. I am able to create the resources I need. However, when I want to deploy a new stack, it is trying to destroy the already existing stack. I have tried to use the lifecycle key with prevent destroy, but that throws an error saying the resource cannot be deleted.
the plan would destroy this resource, but it currently has lifecycle.prevent_destroy set to true. To avoid this error and continue with the plan, either disable lifecycle.prevent_destroy or adjust the scope of the plan using the -target flag.
Is there no way to skip or make terraform "forget" the resource it created? I understand this is tricky because of the state file that terraform maintains, but any leads would help.
Thanks in advance.
You can remove resources from the state using terraform state rm <resource>, maybe that's what you are looking for?
More information available at https://www.terraform.io/docs/commands/state/rm.html.
I think you need to use terraform workspaces for different deployments (environments ?). So you will be able to create different resources for different envs (this is mentioned in this comment Terraform forget resource and recreate?)
Information: https://www.terraform.io/docs/state/workspaces.html
It takes a long time to run terraform and wait.
So I would like to run it to exclude rds that takes the longest time to excute
or I would like to run only ec2 resource.
Is there a way to do such things in terraform?
You can use -target=resource like this:
terraform plan -target=module.mymodule.aws_instance.myinstance
terraform apply -target=module.mymodule.aws_instance.myinstance
or
terraform plan -target=aws_instance.myinstance
terraform apply -target=aws_instance.myinstance
Disclaimer: Before downvoting the answer, please note that he actually asked to either "exclude" or "run only ec2 resource". And after all this time the exclude feature request is still open in the terraform repo.
Adding to Julio's answer, you could target multiple resources in the following manner:
terraform init
terraform plan -target=resource_type1.resource_name1 -target=resource_type2.resource_name1
terraform apply -target=resource_type1.resource_name1 -target=resource_type2.resource_name1
I would like to run it to exclude rds that takes the longest time
Terraform currently does not support exclusion of resources (aka. inverse targeting).
Issue #2253: "feature request: inverse targeting / exclude"
(Thanks for the link Julio Daniel Reyes.)
For those who use variables
terraform plan -var-file dev.tfvars -target=module.mymodule.aws_instance.myinstance
terraform apply -var-file dev.tfvars -target=module.mymodule.aws_instance.myinstance
Is terraform destroy needed before terraform apply? If not, what is a workflow you follow when updating existing infrastructure and how do you decide if destroy is needed?
That would be pretty non-standard, in my opinion. Terraform destroy is only used in cases where you want to completely wipe your infrastructure. One of the biggest features of terraform is that it can do an intelligent delta of your desired infrastructure and your existing infrastructure and only make the changes needed. By performing a refresh, plan and apply you can ensure that terraform:
refresh - Has an up-to-date understanding of your current infrastructure. This is important in case anything was changed manually, outside of your terraform script.
plan - Prepares a list for you to review of what terraform intends to modify, or delete (or leave alone).
apply - Performs the changes laid out in the plan.
By executing these 3 commands in sequence terraform will only perform the changes necessary, in the order required, to bring your environments in line with any changes to your terraform file.
Where I find destroy to be useful is in non-production environments or in cases where you are performing a restructure that's so invasive that starting from scratch would ensure a safer build.
*There are also edge cases where terraform may fail to understand the correct order of operations (do I modify a security group first or a security group rule?), or it will find itself in a dependency cycle and will be unable to perform an operation. In those cases, however, running destroy is a nuclear solution. In general, I would perform the problem change manually (via command line, or AWS Console, if I'm in AWS), to nudge it along and then run a refresh, plan, apply sequence to get back on track.
No terraform destroy is not needed before terraform apply.
Your Terraform configuration (*.tf and *.tfvars files) describes the desired state of your infrastructure. It says "this is how I want my infrastructure to be."
You use the terraform tool to plan and apply changes to get your infrastructure into the desired state you have described. You can make those changes incrementally without destroying anything.
A typical workflow might be:
make changes to .tf and .tfvars files
refresh state
plan changes
review the planned changes
apply those changes
If you wanted to completely destroy that infrastructure you'd use terraform plan -destroy to see what Terraform intends to destroy. If you are happy with that you'd then use terraform destroy to destroy it.
Typically, destroy is rarely used, unless you are provisioning infrastructure for a temporary purpose (e.g., builds) or testing your ability to provision from a clean slate with different parameters. Even then, you could use a count parameter on resources to temporarily provision resources by increasing the count, then decreasing it again when no longer needed.
More comments after #mwielbut's answer.
Instead of option apply + destroy, you need to run terraform with option taint + apply
Normally we don't need run terraform destroy at all. It is a really dangerous option, especially for a production environment.
with option plan and apply, it is good enough to update the infrastructure with code.
But if you do need to destroy some resources and re-build something which is already created, you can use the option of taint, which is the right answer for your question, it is so important and missed in #mwielbut's answer.
The terraform taint command manually marks a Terraform-managed resource as tainted, forcing it to be destroyed and recreated on the next apply.
This command will not modify infrastructure but does modify the state file in order to mark a resource as tainted. Once a resource is marked as tainted, the next plan will show that the resource will be destroyed and recreated and the next apply will implement this change.
Refer:
command taint:
https://www.terraform.io/docs/commands/taint.html
a sample of option taint:
https://www.terraform.io/docs/modules/usage.html
Terraform destroy destroys all the resources and it is not required if you want to apply incremental changes. Destroy should be only used if you want to destroy the whole infrastructure.
No need to use the destroy command before apply. as long as you are in testing period you can use destroy command or destroy the complete infra you can use destroy command
You can use below flow
terraform init
terraform plan
terraform apply
if you made any manual changes that needs to update in your state file, use below command to update the state file.
Terrafrom refresh
You don't need to run to terraform destroy . If you have made any changes to you infrastructure, [added/ removed a resource], on next terraform plan & terraform apply, the changes will be reflected automatically
Terraform apply always refreshes the Terraform state, so if you change anything, it auto recognizes the changes, lets say you've updated your NSG rules, added new VM, deleted old VM, so when you run terraform apply again, your old state gets updated with the new state where you've Added/Updated/Deleted.
If you use terraform destroy, it just kills the entire state and you'll be back to the new state if you are running terraform apply.
You need to use terraform destroy only if you think you just want to bring down your infrastructure and you don't really need it.
For minor - major changes like Adding Components, Updating Rules, Deleting other things, you can use plan and apply without any problem.
Simply NO.
You don't need to run terraform apply before terraform destroyو Your terraform (.tf) files describe the state of your infrastructure.
terraform apply always refresh your infrastructure. And it identifies the state of infrastructure and updates it.
terraform destroy only use is to bring down and completely wipe down your infrastructure. (You have to think twice before using it) you can use terraform plan and terraform refresh to ensure the state of the infrastructure.
You could always manually destroy your instances, after only running your terraform apply. Then when you run terraform apply it will create brand new instances without the terraform destroy.
No! you don't need to run terraform destroy when you need a modification of resources! This is the beauty of Infra-as-Code.
Here are some more details on Terraform init, plan, apply and destroy -
terraform init command is used to initialize a working directory containing Terraform configuration files. This is the first command that should be run after writing a new Terraform configuration or cloning an existing one from version control. It is safe to run this command multiple times.
terraform plan command creates an execution plan. By default, creating a plan consists of:
a) Reading the current state of any already-existing remote objects to make sure that the Terraform state is up-to-date.
b) Comparing the current configuration to the prior state and noting any differences.
c) Proposing a set of change actions that should, if applied, make the remote objects match the configuration.
terraform apply command executes the actions proposed in a Terraform plan. (you can do an apply without plan however it's not a best practice)
terraform destroy command is a convenient way to destroy all remote objects managed by a particular Terraform configuration.
Core Terraform workflows:
The core Terraform workflow has five steps:
Write - Author infrastructure as code.
Terraform init - it’ll automatically download and install partner and community provider directly to the local disk so that it can be used by other commands Plugin_Installation, Backend_Initialization, ChildModule_Installation and Community and third party plugin
Terraform plan - Preview changes before applying.
Terraform Apply - Provision reproducible infrastructure.
Terraform destroy - It will destroy your infrastructure.
No need for terraform destroy, as it will just destroy all the resources created.
You just need to provide the backend configuration in your tf file.
Backend configuration is the configuration in order to retrieve terraform state files.
Terraform apply first time will create your cloud infrastructure, this will update your state file also.
And next apply terraform will compare what new/update resources are to be done with what is already there using state file and will deploy accordingly.