I'm using darkice (http://darkice.org) on a Linux box to capture an audio feed from a fire department radio system. It works great and I can forward the stream to an Icecast2 (https://icecast.org) server so the firefighters can listen to live radio transmissions.
My next goal is to actually record radio transmissions to file.
The fire department isn't always that busy, so the stream I'm capturing has huge periods of silence (hiss). My goal is to somehow capture and record to file only the periods where there are real, human voice transmissions and not waste huge amounts of hard disk space recording hiss.
Any thoughts on the tools that might be able to conquer this?
Thanks!
You should be able to use FFmpeg for this, and its silenceremove filter.
Untested, but try something like this:
ffmpeg -i <Icecast URL> -af silenceremove=stop_periods=-1:stop_duration=1:stop_threshold=-30dB output.webm
Related
My machine is running Ubuntu 20 LTS. I want to manipulate the input live audio in real-time. I have achieved pitch shifting using sox. The command being -
sox -t pulseaudio default -t pulseaudio null pitch +1000
and then routing the audio from "Monitor of Nullsink" .
What I actually want to do is, silence randomized parts of the input audio, with a range. What I mean is, randomly mute 1-2s of the input audio.
The final goal of this project will be to write a script that manipulates my voice and makes it seems like my network is bad.
There is no restriction in method of achieving. That is we may use any language, make an extension, directly manipulate the input audio with sox, ffmpeg etc. Anything goes.
Found the solution by using trim in sox. The project can be found in
https://github.com/TathagataRoy1278/Bad_Internet_Audio_Modulator
I want to do a couple of things:
-I want to hear sound from all other programs through max, and max only.
-I want to edit that sound in real time and hear only the edited sound.
-I want to slow down the sound, while stacking the non-slowed, incoming input onto a buffer, which I can then speed through to catch up.
Is this possible in Max? I have had a lot of difficulty working even step 1. Even if I use my speakers as an input device, I am unable to monitor it let alone edit it. I am using Max for Live, for what it's worth.
Step 1 and 2
On Mac, you can use Loopback
You can set your system output to the loopback driver, then set the loopback driver as the input in Max and then the speakers as the output.
For Windows you would do the same, but with a different internal audio routing system like Jack
Step 3
You can do that with the buffer~ object. Of course the buffer will have a finite size, and storing hours of audio might be problematic, but minutes shouldn't be a problem on a decent computer. The buffer~ help file will show you the first steps needed to store and read audio from it.
I have an audio coming from a radio transceiver on my sound card's microphone input. What i want to make is a simple software-based parrot repeater using Linux CLI tools like the sox suite and arecord. For it to work, i think a flow similar to the following must take place:
The audio that comes on the microphone subdevice is getting recorded in a buffer (file or RAM-based)
When the buffer stops filling (audio stopped), start playing it's content on the audio output device (it is connected to the radio's microphone input)
When it's over, empty the buffer and start expecting step 1 to occur again
I'm looking for an elegant way to implement the logic behind step 2. Is there a CLI tool that i can use for that, so i can pipe the microphone audio taken with arecord to it and play the output of the buffer with sox?
Try looking at this. I did this on a raspberry pi a little while ago, only I made a voice changer.
https://www.instructables.com/Halloween-Voice-Changer-With-Raspberry-Pi/
Basically, play "|rec --buffer 2048 -d" takes recorded sound and puts it in a buffer that is passed in 4096 bit (byte?) chunks to play. -d stands for duration, and if left blank defaults to 0, and will run until killed. If you want to play with the options, there is some helpful info in the links.
Good luck with your project!
We have a setup with a Windows 7 machine where we installed Dante Virtual Soundcard and start that soundcard with ASIO capabilities. The soundcard will receive audio over the network from a Tesira server. We want to capture the audio to files (highly preferring each channel to a separate file). The files will be played back on a later moment. There will likely be 6 channels or more.
In the same setup we use ffmpeg to capture some video which is working fine, with Direct Show. So for audio we wanted to use the same setup, since ffmpeg is able to record audio as well. However, there seems to be no option to select the ASIO devices which the virtual soundcard probably creates. So the question is what command line to use for ffmpeg, or what to install? Or which other program can record ASIO from command line?
I already tried installing:
Asio4all (actually wrong way around)
sox (don't know why actually)
HiFi Cable Asio Bridge (from VB-audio, not enough channels even with donate version)
Voicemeeter (from VB-Audio, not enough channels and actually mixes down)
O Deus Asio link, this might be an interesting option but it did not let me configure any route, any suggestions?
One thing I noticed is that the virtual soundcard can also be set to use WDM. Then I can see the devices with ffmpeg -list_devices true -f dshow -i duymmy, but recording does not yield any result, I have to ctrl-c to make it stop instead of q, and the file is zero bytes. Supposedly this is because the data over the network is all ASIO formatted and the Tesira Server cannot send "WDM data". FFmpeg stops at selecting the capture pin for audio only
EDIT:
I ran ffmpeg with high verbosity and when selecting the WDM soundcard it stops at Selecting pin Capture on audio only. Also when requesting the options it gives the same line for 22 times: min ch=1 bits=8 rate= 11025 max ch=2 bits=16 rate= 44100
You might use Voicemeeter instead of HIFI-Cable / ASIO-Bridge. Voicemeeter is a virtual audio device mixer able to connect everything together, any audio point, in any interface and any app together (including ASIO DAW)... Download & User Manual on www.voicemeeter.com
To answer my own question: it is not possible to capture sound from an ASIO device with ffmpeg. Maybe I will write the code for it if I need it...
I could however solve my issues by separating the two streams of audio data we have (AVB and Dante). These where on the same switch and maybe it is a bug in the firmware, maybe misconfiguration.
Thanks for your help!
How do I get the output from an ASIO device to IceCast2 or FFMpeg?
Duplicate?
And if not, Place the output for ffmpeg -f dshow -i "audio=your_device_name_in_dshow" -list_options
I'm working on a project that requires me to sync an audio playback(preferably an mp3 file) with my program.
My program reads a motion file from a txt file and output's it onto the serial port at a particular rate. At the same time an audio file has to be played back on the speaker. This audio file has to be in sync with the data..that is to say after say transmittin 100 bytes of data, the audio mustve played back to a predefined time.
What would be the tools used to play and control audio like this?
a tutorial would be great!
Thanks!!
In general, when working with audio, you want to synchronize other sources to audio. This is for several reasons, but most important is that audio runs on a clock running on its own hardware. You'll have to get timing information from that clock. There is a guide here written for using portaudio, but the principles apply to other situations:
http://www.portaudio.com/docs/portaudio_sync_acmc2003.pdf