I want to apply a formula that is automatically calculated by a column input from an Excel table to a specific column. At this time, since the column to which the formula is applied should appear at the same interval, the following code value is used and an error occurs. What am I doing wrong?
1004 runtime error
For b = 68 To 299 Step 21
Cells(2, b).Select
ActiveCell.Formula = "=IFERROR" & "([#[" & Cells(1, b - 2).Value & "]] " & "*" & "([#[" & Cells(1, b - 1).Value & "]]" & "/" & "1000000" & ")," & Chr(34) & Chr(34) & ")"
Cells(2, b).Select
Selection.AutoFill Destination:=Range("table1" & "[" & Cells(1, b) & "]")
Next b
cells(1,b) => table Header
Related
I have a for next loop where I have dimmed the row number as "i". I would like to sum up the following range - within row "i", from column C to M in a For Next Loop. I have the following codes:
Range("N" & i).Value = Application.WorksheetFunction.Sum(Range("C" & i & ":" & "M" & i))
I have also tried the following:
Range("N" & i).Value = Application.WorksheetFunction.Sum(Range("C" & i), Range("M" & i))
Range("N" & i).Value = Application.WorksheetFunction.Sum("C" & i & ":" & "M" & i)
I guess my main problem is I cannot figure out the correct way to reference the dynamic row number i in the code, hence the error. Would appreciate your help.
I need to create a formula that is going to concatenate 3 different cells into one date. The formula is going to be a part of a loop function so I need the cell reference to change as the loop function runs.
I am having trouble with the syntax such as the "&" and the """" that are necessary to distinguish parts of the formula from the cell references.
For now I am just trying to get the formula to paste into a single cell without the loop. The 3 cells that I am combining are in columns: N,O & P. I am trying to paste the formula into column M.
I tried creating the formula on a separate "Data" tab and then simply copy and pasting it into each cell using VBA but the row number does not update according to the row that the formula is pasted.
I tried rearranging the & and "" for a while and could not figure out the winning combination.
FormulaRow = Cells(Rows.Count, "M").End(xlUp).Offset(1).Row
M_Formula = "=N" & FormulaRow & "" / "" & "O" & FormulaRow & "" / "" & "P" & FormulaRow
Range("M" & FormulaRow).Value = M_Formula
I am expecting to get the following result: =N5&"/"&O5&"/"&P5 with the row number corresponding to the row that the formula is pasted.
When I tried the copy and paste method I got this message: "Object Doesn't Support this Property or Method"
Any help would be appreciated. Thank you!
Maybe:
Sub sub1()
' If you have 12 in N2 and 34 in O2 and 5678 in P2:
Dim FormulaRow&, M_Formula$
FormulaRow = 2
M_Formula = "=N" & FormulaRow & "&" & """" & "/" & """" & "&" & _
"O" & FormulaRow & "&" & """" & "/" & """" & "&" & _
"P" & FormulaRow
Cells(FormulaRow, ColNum("M")) = M_Formula ' gives the formula you want 12/34/5678
Cells(FormulaRow, 13) = M_Formula ' also gives the formula you want 12/34/5678
End Sub
Function ColNum&(col$)
ColNum = Range(col & 1).Column
End Function
Excel is smart enough to increment the row reference when you do a range in one go:
Range("M5:M" & Range("N" & rows.count).end(xlup).row).formula = "=N5 & ""/"" & O5 & ""/"" & P5"
That will do what you want in 1 line.
Then you can copy the result, paste as values then format to date with something like this:
Sub EnterDate()
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).Formula = "=N5 & ""/"" & O5 & ""/"" & P5"
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).Copy
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).PasteSpecial xlPasteValues
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).NumberFormat = "DD/MM/YYYY"
'Force a reevaluate to make it see actual dates
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).Formula = Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).Value
End Sub
Using this method I just tested on over 12,000 rows and it took under a second.
With regards to the comments about using the date function, using the date function is a much better method, I wanted to show you how to do it using your own method but you can get rid of the formatting code if you use Date like so:
Sub EnterDate()
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).Formula = "=DATE(P5,O5,N5)"
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).Copy
Range("M5:M" & Range("N" & Rows.Count).End(xlUp).Row).PasteSpecial xlPasteValues
End Sub
If you want to leave the formulas then simply delete the last 2 lines in there.
I'm trying to write VBA code to sum up cells, in the process i calculate the latest updated column using the statement:
clncnt1 = wb.Worksheets("Sheet1").Range("XFD16").End(-4159).Column
Suppose I capture the clncnt1 as 20 which is column P. Now how do I use:
wb.Worksheets("sheet1").Range("A1").Offset(16, clncnt).Formula = "=sum(*P12:P13*)"
using the column number clncnt1 that I just captured?
replace your sum with below
"=sum(" & Cells(12, clncnt1 ).Address & ":" & Cells(13, clncnt1 ).Address & ")"
you are actually getting the addresses of the range and then concatenating it all together.
Full code:
clncnt1 = Worksheets("sheet1").Range("XFD16").End(-4159).Column
Worksheets("sheet1").Range("A1").Offset(16, clncnt1).Formula = "=sum(" & Cells(12, clncnt1).Address & ":" & Cells(13, clncnt1).Address & ")"
this worked wb.Worksheets("sheet1").Range("A1").Offset(11, clncnt + 3).Formula = "=sum(" & _ wb.Worksheets("sheet1").Range("A1").Offset(8, clncnt + 3).Address & ":" & _ wb.Worksheets("sheet1").Range("A1").Offset(9, clncnt + 3).Address & ")"
I am trying to average a column but only if the value is greater than zero. I then want it to put the information in the next blank cell in that row.
The below code was working as a simple Average but I want it to exclude any values of zero from the above cells.
With Range("D2")
.End(xlDown)(2, 1) = _
"=AVERAGE(" & .Address & ":" & .End(xlDown).Address & ")"
End With
I Tried with the following code to have it as if the cell address is greater than zero. But it keeps giving me an error to debug?
With Range("D2")
.End(xlDown)(2, 1) = _
"=AVERAGEIF(" & .Address & ":" & .End(xlDown).Address & "," & Cell.Address & " > 0," & .Address & ":" & .End(xlDown).Address & ")"
End With
Any help would be great.
Thanks
Al
Your syntax for the formula is wrong.
You need to create a formula like
=AVERAGEIF(D2:Dxx, ">0")
So use this
With Range("D2")
.End(xlDown)(2, 1) = _
"=AVERAGEIF(" & .Address & ":" & .End(xlDown).Address & ","">0"")"
End With
UPDATE:
Got a new issue with a formula, can't quite get it to work because of text in the formula, the formula (as taken from excel) should be,
=IF(D2<=0,"No Sales Price",E2/D2)
I have tried as many combinations as I can think of but the "no sales price" is causing an issue with the quotation marks. My current code is
For i = 2 To LastRowG
Range("Q" & i).Formula = "=IF(D" & i & "<=0," & "(No Sales Price)", & "(E" & i & "/D" & i & "))"
Next i
have had a look around but been unable to see any resolutions to the problem, any enlightenment will be met with the greatest appreciation
EDIT:This was fixed by inserting the following lines;
For i = 2 To LastRowG
Range("Q" & i).Formula = "=IF(D" & i & "<=0," & Chr(34) & "No Sales Price" & Chr(34) & "," & "E" & i & "/" & "D" & i & ")"
Next i
The Chr(34) inserts the ASCII character appertaining to that number which just so happens to be ". The program doesn't read it as having typed in the quote marks and continues to read the line of code correctly but then places the "no sales price" correctly in the formula.
It will output the line as the formula is intended to be and the Chr(34) is like writing ""No Sales Price"" without the inevitable "expected end of statement" error
What I suggested will result in something like this:
LastRow = Cells(Rows.Count, "C").End(xlUp).Row
Cells(LastRow + 1, 3).Formula = "=SUM(C1:C" & LastRow & ")"
Extra 1
Is it possible to use this formula to enter the word Total in the cell to the left?
Range("B" & LastRow + 1) = "Total"
Extra 2
One more just to push my luck, how about copying a formula all the way down a column the the last cell? =G2*57.5 copied until the last row in I
LastRowG = Cells(Rows.Count, "G").End(xlUp).Row
For i = 2 To LastRowG
Range("I" & i).Value = "=G" & i & "*57.5"
Next i