I am trying to switch my dynamic DNS from IPv4 to IPv6, but I am encountering a strange issue. The device is accessible via its raw IPv6 address, but whatever dynamic DNS server I use, it always results in an IP address not found issue. The IPv4 one works fine though. The server is also correctly configured, otherwise the raw address would not work.
What is even stranger is that services like http://ipv6-test.com seem to be able to verify that IPv6 functionality exists and also which web server I use. They also list the corresponding name servers.
I tried the dynamic DNS services of spdyn, dynv6, and ddnss. I also tried noip, but it seems they only support IPv4 for free. (My IPv4 one is with noip.)
Does anybody have some advice? I'm thankful for any help!
Most probably your network is not supporting IPv6.
Related
I would like to force the http_poller to use ipv6 first prior to ipv4.
The host running logstash is dual stacked and the target host also.
The issue lies in the ACL on the target host only accepting requests from the IPv6 addresses on the vhost configured.
curl works as it is default ipv6 first if dual stacked and ipv6 addresses are returned by dns (but also ipv4).
When in touch with the supplier of the endpoint it seemed that we are going over ipv4 when using the http_poller input from logstash iso ipv6, I see no options in the plugin to force ipv6 and the supplier is not going to change its dns, nor allowing our ipv4 address.
I know that I could create a workaround with having an exec input that handles the request, but I consider this only as a last resort.
Someone who has an idea on how to solve it?
Update: I already looked into the info of manticore http client, but did not find a solution there (thanks Badger for reminding me to share the fact that I already looked into this)
Is there a good API alternative to res_ninit?
There are problems with this call because the res->_u.ext.nscount6 and res->nscount do not reflect correct numbers. Adding a IPv6 address to /etc/resolv.conf still results in the nscount increasing where you would have expected the nscount6 to increase.
An older glibc version seems to increase both nscount and nscount6 for a IPv6 address in /etc/resolv.conf.
I am currently parsing resolv.conf directly because i am unable to depend on the res_ninit call. But this is fine for Manual DNS.
When it comes to DHCP DNS, then i need an API to give me the result. There is no other way (that i can think of) to determine the DNS IP addresses over DHCP.
Tried posting in other places within the board but not of help so far. E.g.
Retrieve IPv4 and IPv6 nameservers programmatically
res_ninit and res_init only ever read name server information from /etc/resolv.conf. You can always get the same data name servers by parsing /etc/resolv.conf yourself and examining the nameserver lines. If there is no nameserver line, the default 127.0.0.1 will be used.
I don't think it is necessary to provide an API for that because the file format is so simple that is likely more difficult to use the API than to read the file instead.
Name server assignment over DHCP is implemented by rewriting /etc/resolv.conf if there is no local caching resolver running on the machine. The exact mechanism used for that is distribution-specific, e.g. Debian uses resolvconf if it is installed.
If a local caching resolver is running on the system (such as dnsmasq or Unbound), name servers over DHCP can be directly configured in that caching resolver. In this case, /etc/resolv.conf will keep pointing to the same name server, typically by listing nameserver 127.0.0.1 or no name server information at all (which is the default).
Hi I have a Huawei ADSL modem with a dynamic IP. I set up a dynamic dns with freedns and I can easily access my Virtual host on apache from outside my private network, from internet.
So trying to access it from a local network I get a modems login page.
I have the rule in my modems NAT to connect port 80 to my server but it seems it doesnt work from internal net.
My server hosting the virtual host is 192.168.0.1 , the modem has the 192.168.0.254 address.
I tried to put my external domain name into the /etc/hosts file, but if I do that then asterisk server gets confused.
What could be the cause of the problem ? And what would be the best solution to this problem ?
Should I set up a caching DNS on the private side of the net ?
Hugger is half right... Its because your router is blocking loopbacks. The easiest way around this is to edit the hosts file (See the Wiki page) on the computer that is behind the network to see the local IP of the computer as the virtual host your going for. For example if your server is on 192.168.0.1 and the virtual hostname is www.imrad.com then insert
192.168.0.1 www.imrad.com
into your hosts file. If your computer leaves the local network (like a laptop you take to work) and joins a network not behind your router you need to comment out the line in the hosts file.
well actually to access that you must find the local ip address of the server by going into command line/prompt and typing ipconfig /all then you will find ipv4 address. Take note of that.
Go to another computer and your that ip and it will show.
The reason that was happening is because the router/modem knows you are in its network so it will think you ar trying to go top the login page of it. That happens to me too.
So I have ten extra IPs bound to my network adapter. When I go to add a binding usually IIS7 presents me with a list of IP addresses that are available, however I only have 127.0.0.1. I can manually enter the IP address to bind host headers to the websites. However I would still like IIS to function normally and present me with all of the IP adresses that are bound to the adapter.
Any ideas how to fix this?
Ok I figured it out, I should just stop asking questions on here I seem to answer a lot of my own. There was an entry in the hosts file that bound 127.0.0.1 to the hostname of the computer, removing this solved the IIS issue.
Our user interface is communicating with another application on a different machine, often connecting using domain names.
On our network, when IPv6 is installed, DNS name resolution works great, all machines can be pinged and contacted fine.
When IPv6 is uninstalled, pinging the same DNS names returns an IP address on some distant subnet (24.28.193.9; local subnet is 192.168.1.1); our application is then unable to communicate. When IPv6 is reinstalled, the DNS resolution corrects itself.
Even without IPv6 when ping is not working, I can still browse other machines using Windows Explorer by entering \\\\MACHINE_NAME\\. I'm not sure why the name resolution seems to work here. We are working in the Windows XP SP2 environment.
The IPs of the machines can be pinged successfully. It is only the DNS names that do not resolve properly.
I looked for the address of our DNS server. All of our computers are pointing at the network gateway, which is a wireless router. The router has the same DNS server address listed when IPv6 is installed as it does when it isn't installed.
The strangest thing is that I just discovered that it does not matter what DNS name I ping. All pings to DNS names return the same address: "24.28.193.9".
I tried flushing the DNS Resolver Cache and registering DNS on the target machine and the source machine. All to no avail. The only DNS name that I can ping is the name of the current machine.
Any thoughts as to why our software can't communicate without IPv6 installed?
UPDATE:
OK, I've done a little more research now.
I looked for the address of our DNS server. All of our computers are pointing at the network gateway, which is a wireless router. The router has the same DNS server address listed when IPv6 is installed as it does when it isn't installed.
The strangest thing is that I just discovered that it does not matter what DNS name I ping. All pings to DNS names return the same address: "24.28.193.9".
I tried flushing the DNS Resolver Cache and registering DNS on the target machine and the source machine. All to no avail. The only DNS name that I can ping is the name of the current machine.
Any other suggestions? Thanks so much for your help.
You've got multiple things going on here
DNS Name resolution
Windows Name resolution
IP-IP ICMP communication
You've written your question as if there's a problem with #3, but everything you describe points to the problem actually being with #1. If you take resolution out of the question, can you ping the correct IPs with our without IPv6 installed?
It sounds like maybe you have an IPv6 name server installed that has correct information and the IPv4 name server is incorrect? Are you receiving name servers via DHCP or hard coding? What are the IPs of the name servers you are using when IPv6 is installed and when it isn't?
I know this is a late answer, but in case someone else has the same problem, the key is the IP address, "24.28.193.9". A quick Google search reveals it seems to be related to your ISP completely breaking the DNS protocol by returning a fixed IP address for all non-existent domain names (the correct answer would be NXDOMAIN). Your network gateway is most probably just forwarding your queries to your ISP's name servers.
Your systems are relying on the correct operation of the DNS protocol. They are expecting a NXDOMAIN answer before querying the name via other methods (most probably NetBIOS name resolution). Since the DNS server is completely broken and returning an incorrect answer, the correct address is never looked up.
The reason installing or uninstalling IPv6 changes the situation is most probably because something related to it is changing the name resolution order (to look up using other methods before trying DNS). So, a workaround would be to change the name resolution order yourself.
The real fix would be to either change to a better ISP (one which does not break established protocols) or run your own DNS server (which is what I started doing on all systems I administer ever since VeriSign pulled a similar stunt; theirs was even worse in that changing ISPs made no difference at all).
References:
Warning: Road Runner DNS says nonexistent domains exist