This is my screenshoot for Next Button not turn on when i am trying to create Virtual Device in AVD Manager but system image cannot be selected and next button not turn on.
I am running Android Studio using 32bit computer with 1GB RAM and everything is okay, except its AVD Manager cannot be selected system image. Do you know what should i do, so the Next Button on this image below can turn on?
I think I found the problem - expand the column where the names of the images are - then, all of the sudden the "download" link appears.
Go through the download process and accept the license if you have to.
and it should work from there.
Stupid idiotic problem to have, found the solution by accident.
You should be having at least 4gb RAM.
Related
Everything used to work fine, but I haven't been using Virtual Box for several weeks. Now all of the sudden, I get the following exception when trying to start my Windows 10(32-Bit) VM. Note - Things were working fine several weeks ago. As far as I can tell, I haven't changed anything on my system that would cause this. The exception details are as follow:
VirtualBox - Error In supR3HardenedWinReSpawn (rc=-5640)
Please try reinstalling VirtualBox. where supR3HardenedWinReSpawn
what: 1 VERR_SUP_VP_THREAD_NOT_ALONE (-5640) - Process Verification
Failure: The process has more than one thread
I have been researching this for some time, to avail. Any help would be greatly appreciated.
There is a workaround:
Open VMbox manager
Run your VM with option "Detachable start"
Wait a while and then use "Show" to show the screen
Detachable start option
Show the screen
My setup:
Oracle VM Box 6.0 running on Win10,
VM is Ubuntu 18.04
If you are using vagrant to boot up your Virtual machine, then in most cases the error is due to improper shutdown of the VM. A fix that worked for me is to execute vagrant halt or similar commands multiple times until you have a clean boot.
In case anyone is in the same predicament, I will share what finally fixed my issue. I found a post during my hours and hours of searching that said you have to enable virtualization in BIOS settings. I checked my machine and virtualization was enabled, so I went on searching. At a loss for what to try next, I finally tried turning virtualization off, just to see. No change, but when I went to turn it back on, just as a flook I turned Turbo off, and what do you know - All of the suddent I can start my VM. So the solution, in case it saves someone time:
Uninstall Virtual Box (Latest Version)
Reboot your machine and enter BIOS
Make sure anything with the term 'Virtualization' is turned on
Make sure anything with the term 'Turbo' is turned off
Reboot your machine
Install Virtual Box
Hopefully this saves some poor soul what I had to go through to get this thing working.
METHOD A
If you are using WindHawk, exit it and re-try.
Method B
download previous version from https://www.virtualbox.org/wiki/Download_Old_Builds
install & extensions
Try to re-run your guest OS.
Try to do these steps:
1. Uninstall the VirtualBox program.
2. In your C:\users\\ might have two folders called ".VirtualBox" and "VirtualBox VMs": Delete them
3. Restart your PC
4. Install VirtualBox again
5. Add again your VM
6. It must working fine!
These steps worked for me!
Workaround 1:
Just increase the RAM size from virtual box settings
Right Click on OS image .
Settings->System->MotherBoard
Increase the base memory
Workaround 2:
Change the Paravirtualization Interface from default to none
Right Click on OS image .
Settings->System->Acceleration
Change acceleration from default to none.
The above one's was basically a workaround , which can work in some but not in all.
The best thing would be to reinstall virtual box with latest version which virtual box has tried to rectify the bug and use the same vdi files which was made by Virtual Box .
One of the most common causes that will cause this type of behaviour is a missing driver (VBoxDrv.inf). It’s possible that due to some permission issues, the installation of this crucial driver doesn’t complete during the initial installation. In this case, you can fix the problem by installing the VBoxDrv.inf manually.
1.Fix the directory problem Press Windows key + R to open up a Run dialog box. Inside the text box, type ‘regedit’ and press Enter to open up Registry Editor. When you’re prompted by the User Account Control (UAC), click Yes to grant admin access.
Once you’re inside the Registry Editor, use the left-hand section to navigate to the
following location: HKEY_LOCAL_MACHINE\system\currentcontrolset\services\vboxdrv
After you arrive at the correct location, move over to the right-hand section and
double-click on ImagePath the path associated should be \C:\Program
Files\Oracle\VirtualBox\drivers\vboxdrv\VBoxDrv.sys
if not replace with the above path and click ok.
Install the VBoxDRV.inf OPen location C:\Program Files\Oracle\VirtualBox\drivers\vboxdrv right-click on VBoxDrv.inf and choose Install from the context menu.
Then in cmd run command "sc start vboxdrv"
Restart system. This should work.
When I starts android emulator in android studio ; after boot completes this window opens :
and emulator hangs . How can I fix this problem ?
In my case, cold reboot resolves the issue on an OSX machine.
Close all open emulator first
Open android studio configure > avd manager
from the virtual device you are working on action > cold boot now
Hope the interface will be almost similar to Linux and Windows machine and the fix will workout there too.
I found some solutions in this page :
Error Message: emulator-arm.exe has stopped working
In this page suggests changing of resolution and RAM and you should decrease them.
When I decrease my resolution It fixes this problem .
Try to use a low-resolution device, when I selected Nexus 4 it kept running smoothly with me. If it doesn't work. try this:
If you want to have graphics acceleration enabled by default for this AVD, in the Hardware section of the AVD configuration, click New, select GPU emulation and set the value to Yes.
Beyond other possible solutions, what worked to me was to change the "Emulated performance" option to "Software".
I have tried changing the resolution, RAM size, Emulated performance graphic type, etc.. but none of them worked. Finally, I found that the android version image was my problem(Android P) so I downloaded a different version image and it worked fine
If the virtual device was previously working, try to wipe user data.
Go to the AVD manager, select the virtual device action and click on "Wipe data" (Wipe the user data of this AVD)
Here is how I fixed it:
In the AVD Manage-> Create Virtual Device... -> New Hardware Profile
Device Name: My Device
Resolution 800 x 600
RAM: 512 MB
Left other options as default -> Finish
Next -> Next (Or select API e.g R) -> Finish
That device never throws that error and works faster.
You can try doing cold reboot from Android Studio. It'll work normally then. I guess it usually happens when your PC/laptop goes into sleep mode, with emulator, debugger running in the background.
Solution 1:
Decrease API level resolves the issue on an Windows machine.
Solution 2:
Try to use a low-resolution device, If it doesn't work. try this:
If you want to have graphics acceleration enabled by default for this AVD, in the Hardware section of the AVD configuration, click New, select GPU emulation and set the value to Yes.
Solution 3:
Follow Steps:
Go to Device Manager
Select Wipe Data
Launch AVD again
I decided to try Android Studio 2.0 having used Eclipse in the past but I'm having considerable difficulty getting the AVD to load correctly. I've done quite a bit of googling and research into the problem, both here on SO and Google.So far nothing has worked.
The emulator simply hangs on the android load-up screen ever time I try to run it. I've seen it advised to use Genymotion but I would first prefer to resolve the issue natively in Android Studio to feel confident going forward using the IDE for building projects.
Here's what I've tried:
Complete reinstall of Android, SDK and SDK Tools
Install and configure of Intel x86 accelerator
Lowered the RAM amount to 512 in AVD settings
Multiple attempts at deleting and recreating AVD's
Tried creating different AVD phone models(Nexus One,Nexus 5x etc.)
Resetting ADB in AVD Monitor Tool
Starting ADB server from terminal
Restarting Android Studio multiple times after changes
Running SDK/SDK Tools updates several times
Made sure the SDK path is correct
These are the majority of the "solutions" I found either on other similar SO questions or by googling none of which has resolved the problem.
When I run the emulator currently it displays the following in the run window:
/Users/<username>/Library/Android/sdk/tools/emulator -netdelay none -netspeed full -avd Nexus_5X_API_23
Warning: requested ram_size 1024M too big, reduced to 512M
emulator: WARNING: Increasing RAM size to 1024MB
emulator: WARNING: VM heap size set below hardware specified minimum of 228MB
emulator: WARNING: Setting VM heap size to 256MB
Hax is enabled
Hax ram_size 0x20000000
HAX is working and emulator runs in fast virt mode.
console on port 5554, ADB on port 5555
The emulator shows up fine in the Android AVD Monitor devices pane and even appears to go through the entire booting process on the emulator screen itself but never gets to the Android home screen.
Also, Logcat seems to be looping continuously through dozens of errors and warnings, which don't offer any clear indication of what the issue might be or direction of how to resolve it.
I feel like I've exhausted every idea and not sure how to move forward.Just for the record, I am running El Capitan 10.9.2 with a 2.4gh Intel Core 2 Duo and 4gb ram.It's not the fastest machine for sure but should be capable of running Android Studio and the emulator.
Any help or guidance resolving this problem is gratefully appreciated!
For me this worked: in AVD(Tools->AVD) click on the small arrow for desired emulator then click on "Wipe data".
After that, it successfully started - passed the android logo screen - although a bit slowly.
You have two thing:
You should Increase your ADB emulator Heap to the minimum required.
in your case: 512M
into your AVD Manager:
Click Edit on your Emulator
"Show Advanced Settings" at the bottom
Go to: "Memory and Storage"
Edit the VM heap value to 512 MB
Finished
Image:
You can Wipe data to your Emulator. here is an exemple website
At one point my laptop hit a kernel panic and restarted while running an active AVD emulator session. When attempting to restart the emulator, the emulated device (Pixel 3) stayed stuck on the startup splash logo screen.
Fix steps:
Stop hung emulator session.
rm ~/.android/avd/name_of_emulated_device.avd/*.lock
rm ~/.android/avd/name_of_emulated_device.avd/*.qcow2
Restarting the emulated AVD should now be successful.
Windows equivalent for ~/.android should be C:\Users\.android, but I can't confirm this myself.
Note: You will likely lose any additionally installed apps and current work that was on the AVD.
Unfortunately, increasing the heap size didn't help in my case. The virtual device was actually running fine before with the previous amount of heap.
What I eventually ended up doing was just creating a new virtual device through the AVD manager leaving most of the fields the default value. The new device ran fine and booted up as expected and was able to run my app. It's possible something in my first virtual device became corrupted.
I had the same problem. I'm running El Capitan 10.11.5 with a 2.0GHz Intel Core 2 Duo and 8GB RAM, Android Studio 1.5.1.
After upgrading to Intel x86 Emulator Accelerator (HAXM Installer), rev 6.1.1 and deleting my API 14 SDK and related files, the newly installed API 23's Google APIs Intel x86 Atom System Image would not get past the Android logo screen.
After much trial & error, the Intel x86 Atom System Image (not Google APIs Intel x86 Atom System Image) for API 15 finally loaded the home screen on the emulator after ~ 8 min and one android system crash.
Will try the Intel x86 Atom System Image for API 23 later. Hope that helps.
I had the same problem and none of the steps listed here helped me, either.
But since the solution that worked for me was not mentioned here yet, I thought it might help you or one of the others finding this thread:
What did work for me was disabling certain settings in my Avast Antivirus as proposed by the Android studio troubleshooting page here.
My version of Avast did not have the setting "Use nested virtualization when available", however just turning off "Enable Hardware assisted virtualization" (note: restart is required for it to take effect) solved the problem just fine.
So if you are using Avast or another Antivirus which manipulates virtualization, be sure to look through the correspondent settings.
I had experienced same problem, What I did was, I clicked on the drop down in the actions column, then clicked on wipe Data, and that resolved it for me on ubuntu 20.04
I had this problem and running as admin fixed this (drove me crazy).
Hope this works for you too tried some many fixes.
What worked for me?
Create new project with same configs.
And start your old emulators in it.
What did not work?
Wiping data.
Increasing Heap size.
Creating new virtual device.
I also had the same problem with my AVD. After lots of trial and error I arrived at a solution for my problem. the problem was with the Heap size and the RAM size.
Initially the default heap size was 128 MB and RAM was 1563 , I just changed the heap size to 512 MB and reduced the RAM size( high RAM was making my pc run slow) also I enabled hardware acceleration. And Yipeee, it worked.
It's very easy to fix all you need to do is go in AVD Manager click on the small arrow on most right side of the screen beside the edit icon. Click that small arrow and select wipe data.
Now when you'll start your AVD it will restart and work properly.
I have been trying for days to get a simple app any app made in livecode to display either on my tablet, smartphone or emulator. It just doesn't work. Here is what I have done:
I have installed my sdk and pointed livecode to it in preferences.
Picked 2.3 as my version
Check my google usb drivers and they are up to date.
I followed live code's step by step and no success. I am thinking that since I am running windows 7 not a Mac, maybe this cant be done. It seems all the developers run Mac's?
I even tried to make a .apk, It made the file but " There was a problem parsing the package" once I got it on my Galaxy tab. I made sure that I checked the box to allow programs to run on my tablet. So I am still stuck.
To see if the SDK is working correctly you could try to use the Android SDK emulator first.
Open the Android SDK Manager and select the menu Tools->Manage AVDs.
There you can create a virtual Android device and run it.
If the virtual device is running you can see the virtual device under "Development->Test Target in Livecode. Select it and either select "Test" under "Development" or press the "Test" button. Does this work?
That error message means that the operating system on your device is preventing the app from being installed. The most likely reason for this is that you haven't changed the "Allow installation of apps from Unknown Sources" setting on your Galaxy Tab. There are other reasons and solutions for this error message - to see them visit Panagiotis's excellent blog post on the LiveCode website, your error message is in the fifth example
https://livecode.com/how-to-deploy-apps-to-android-devices/
I would like to know if there is a tool simillar to mymobiler for Wince 5.0 which I can use to control the device from my desktop.
I use mymobiler (v1.25) but I believe it controls only devices running on WM5 and above.
Any help would be highly apprecited as the screen of my device has stopped working.
I use MyMobiler myself when I am coding for WinCE5.0 (not very often but I do know that it works.)
In your extracted MyMobiler zip file is three versions of remote.exe.
remote.exe
remote.exe.50
remote.exe.40
The only one I have gotten to work on wince5 is remote.exe.40
Just rename the existing remote.exe file (remote.exe.wm) [you may have to click tools, folder options, and uncheck hide extensions for known file types]
Next rename remote.exe.40 to remote.exe.
After that you are good to go. Copy remote.exe to the device through activesync (xp) or WMDC (>XP) and launch it on the device. It was a bit funny connecting for me the first time - I click connect on pc, then had to click the tray icon on the device, and click connect.
Good Luck!
Link to Video Showing it Running 1
This does work, the auto-install doesn't seem to work but if you copy the remote.exe over as mentioned (any location will do), then start remote.exe, click on the MYMobiler icon in the tray and select Connect, it will attach to your PC like the WinMobile version does.
Also, check the ini files in the MyMobiler directory. There's some details on the features/options.
I can confirm that Dave and Mike's solutions work on Windows CE 7 as well.
I was getting an error with the AYGSHELL.dll library when starting My Mobile after the gun was connected.
Run Mymobiler.exe before you connect the scanner to the PC and then connect to the PC using the tray icon from the gun. No error.