I'm using Index-Match to match Full Names with head count in that party.
I have it working but it uses both the structured and explicit cell reference.
I can't figure out why when I add a new row in my table, the column with the index-match formula wont populate the last row.
This is the formula used:
=IFNA(INDEX(AA:AA,MATCH([#[Preferred Seating 1st Choice]],D:D,0)),"")
Column AA has the head count number and column D has the list of full names.
Preferred Seating is the column used to reference the search.
I looked around and can't seem to find why it wont fill in the last row after that rown info is entered.
I can only assume it has something to do with the mixed Explicit-structured cell/column references. Any help please.
Yes Excel may not automatically assume a formula needs to be automatically filled in an entire table column if it contains unusual references. Unless you have data outside the table, you should just refer to the columns in the table:
=IFNA(INDEX([Column AA Name],MATCH([#[Preferred Seating 1st Choice]],[Column D Name],0)),"")
These can be easily entered when editing the formula by selecting all cells in the source columns excluding the heading. The formula will always use the entire
source columns and the formula should automatically fill its own entire column.
You can also control whether a column automatically has its formula updated through a hidden property. The ability to change the behavior of the column only appears through the front end when you're making changes to the column.
After entering a formula in a column, Excel will either automatically fill the entire column and give you the option to turn off the automatic fill, or Excel will not automatically fill the entire column and give you the option to turn it on.
After entering a formula that isn't being filled, this icon will appear:
Click it and then select to Overwrite all cells in this column with this formula
Deleting a formula from one cell in a column that is being automatically filled will turn off the automatic fill. Double clicking a cell with a formula and pressing enter will give you the option to turn it on again.
Related
Summary:
I am currently trying to fill a formula to a whole column in Excel to the end of an adjacent dataset (A2:A14500). Instead of the usual behaviour where Excel will flash-fill it to the end of the dataset in the adjacent column B2:B14500 for example, it instead flash fills it to the whole column (B2:B1048576), even past the end of the dataset in column A.
Use Case:
Column A is just a =FILTER command to pull from another sheet, excluding the blanks (in my live sheet, cell A1 is =FILTER('Raw'!A:A,'Raw'!A:A<>""). All other columns contain headers in cell 1:1. Cell B2 contains a basic 2 part =IF statement with an error catchall: =IF(ISERROR(VLOOKUP(A2,'Lookup'!A:B,2,FALSE)),"No",IF(VLOOKUP(A2,'Lookup'!A:B,2,FALSE)="Error","Yes","No"))
In my current example, the =FILTER in column A produces 14500 rows of data. I am attempting to use the fill handle to populate B3:B14500 with the =IF statement currently in cell B2. When I double press the fill handle, it fills the whole column of B3:B1048576, which causes Excel to crash (I am trying to do the same for 32 columns (B2:AG14500), so it is flash-filling over 33 million formulas instead of 600K).
Expected result when double clicking flash handle in formula column:
Data
Formula
1
Yes
2
Yes
3
No
4
Yes
Actual current result when double clicking flash handle in formula column:
Data
Formula
1
Yes
2
Yes
3
No
4
Yes
No
No
No
No
No
Final Comment:
Usually, when double pressing the fill handle on a formula in column B, I'd expect it to match the end of the dataset in column A (If column A contains data in cells A2:A100, I'd expect double pressing a formula in cell B2 to copy that formula to B2:B100, not B2:B1048576).
I know that copy-pasting is an option, as is manually dragging the fill handle down, but this involves me using weird Ctrl/Shift/Arrowkey combos to select the right range (this is supposed to be user friendly by others who don't use Excel much), or a long time holding the fill handle as there's 14K rows of data. Additionally, I am aware of Home>Fill>Down and Data>Flash Fill but neither of these work for me (Fill Down replaces the formula in B2 with the header in B1 and only copies down to B2, and Flash Fill tells me it can't see a pattern, despite providing it 1/2/5/10 cells of example data).
Any assistance with understanding why the double-click fill handle isn't working (I suspect it's due to the way it handles the =FILTER in column A), or how to overcome this would be appreciated. Currently using MSO365. Thanks!
PS. The reason I haven't filled the formulas manually is the number of cells in column A will change for each report generated with this spreadsheet, so the number of cells it needs to populate will vary.
=IF(ISERROR(VLOOKUP(A2#,'Lookup'!A:B,2,FALSE)),"No",IF(VLOOKUP(A2#,'Lookup'!A:B,2,FALSE)="Error","Yes","No"))
Adding # to the cell range that results in the spill will reference the whole spill. In case of lookup it'll spill the result of the lookups from the first to the last of the cells from the spill range.
PS since you own Office 365 you might want to look into XLOOKUP instead of VLOOKUP. XLOOKUP already has an embedded value if not found.
I'm trying to create a form in excel for my team to fill out which highlights certain cells in a row as compulsory (format the cell colour) based on the number from a table in another sheet which has 3 preset dimensions ("M"=Mandatory, "P"=Prohibited, "O"=Optional) for each number across multiple analysis field.
I have tried conditional formatting formulas to highlight the cell to fill out if the lookup of the number chosen returns "M") but I don't seem to have a formula which validated this and returns with the cell highlighted when it needs to completed.
I would like the formula to return the cell as highlighted if it is mandatory based on the lookup to the table and need the user to fill out the cell with the information relevant.
Any help would be much appreciated.
If I understand your question correctly you just want the cell to highlight when its sister cell in another sheet is coded "M". That's a fairly easy formula.
=Sheet2!$B1="M"
This is for a straight column in B, where the cell it's checking against is in sheet 2 and also in column B. If it's for a row simply move the $ to say b$1.
If you want the highlight to disappear when the cell is filled in use this formula:
=AND($B1=0,Sheet2!$B1="M")
The goal is to create a series of graphs that will update automatically based on the raw data.
So, I have created a graph manually and want to edit the formula to accomplish the auto update.
The column names will always be the same, so I want to be able to select all data in a column based on the name BUT ignore any cell that is blank (above zero maybe).
The formula excel has given me so far is
=SERIES(rawdata!$M$1:$M$6,rawdata!$A$2:$A$37,rawdata!$M$2:$M$37,1)
So, something like
=SERIES(rawdata![column name],rawdata![column name],rawdata![column name],1)
I'm not sure how the skipping blank columns should work either. To expand on this further only one of the columns can potentially contain blank values. So if a cell is blank in that column then that entire row shouldn't be plotted, if that makes sense!
strong text =OFFSET(Sheet1!$B$2,0,0,COUNTA(Sheet1!$B:$B) - 1)
Try this formula when you define the name for the column of values you would like to have data automatically added from. I know it works when each cell has either a formula or a value. Like a column that is automatically calculated based on values in other columns.
In this formula example the cell B2 refers to the first point of data in the column. (make sure your references are absolute! ie, use $B$2)
This automatically returns the range of data as it changes when CountA is added:
=OFFSET(reference, rows, cols, [height], [width])
=COUNTA(value1, [value2], ...)
Hope this helps! It worked for me! :) If you have completely blank cells in the column you might have to make a couple changes though.
-Reverus
I have the formula below that I'm using to link to a certain sheet and cell in my workbook that contains a graph for each entry. On the sheet I link too, each graph is about 20 cells down from the previous one. I have over a 100 graphs now and it will grow in time so I was trying to use the HYPERLINK formula rather than the Hyperlink button for this. I thought I would be able to just insert the formula in the first row, paste it in the second row with an added 20 cells, highlight the two and drag it down but it will not count in increments of 20.
Is this even possible?
=HYPERLINK("#'Trends'!A25","Click To View Trend")
I'm thinking you will have to use some type of concatenation to get the behavior you are after. To do this, you may want to employ a "helper" column. For example, put the "numbers" you are after in column B -- below you will see that I incremented it by 5.
Now your HYPERLINK formula in cell A1 is written as:
=HYPERLINK("[Book1]Sheet2!A"& B1,"Click Me for Sheet2, Cell A"&B1)
(Assuming the workbook is called Book1. Now, I can drag that formula down and it will update "dynamically" to account for the changes in column B.
I have an excel file generated by SAP. I need change its format from multiple tables separated by a title to one single table. This is the original table:
and i need it to look like this:
Im new to excel, so i dont have a clue how to do it.
I cant do it manually becuase the file has 5000+ rows.
Any guidance?
I usually use the generic formula:
=IF(XX="",YY,XX/ZZ)
Where XX is a cell you can use to identify a header to append to the individual transactions and YY is the cell directly above the cell you have put your formula. XX is when you need that value itself, ZZ is another value. You'll understand when you apply it.
For instance, here, you could use cell D5 to do this. I would insert two columns before column D (the value of cell D5 is now in cell F5), and put this formula in cell C5:
=IF(F5="",C4,B5)
I will then fill the formula down. This carries the Material ID everywhere down to the last row. There are two quick ways to do this in a file of this type:
Copy the formula, scroll to the bottom of the sheet, hold Shift and click the last cell in the column, then paste.
Select the cell containing the formula, scroll to the bottom of the sheet, hold Shift and do Ctrl + ,D.
In cell D5, I would put the formula:
=IF(F5="",D4,F5)
And fill it down as well to get the material description.
Now for the size per unit, you can create a column to the right of column K (column K now has 'Size per Unit' since we inserted two columns earlier), and put this formula in cell L6:
=IF(K6="",L5,K6)
Fill it down to get it everywhere.
Now, to finish it up, select the whole sheet and copy/paste values (Paste Special > Paste Values) to remove the formulae. Delete rows 1 and 2, put a filter and sort by a field such as the column 'Metric'. Go to the bottom and delete the no longer needed rows.
As a bonus, if you need to make absolutely sure that the order of the transactions is the same as initially, insert a column somewhere, put sequential numbers into it; that is the first cell in the column has 1, the second 2, then 3 etc and fill to the bottom. Be sure that it is in the filter when you delete the unneeded rows, and sort by this column when you are done.
5000+ rows is still good though, I've had to deal with 10+ workbooks each with ~90000 rows once ;)